Add ethernet refclock mux support and set it to internal clock by
default. This configuration will not affect existing boards.
clock tree before this patch:
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
|- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
after this patch:
fec1 <- enet1_ref_sel(mux) <- enet1_ref_125m (gate) <- ...
`--<> enet1_ref_pad |- pll6_enet
fec2 <- enet2_ref_sel(mux) <- enet2_ref_125m (gate) <- ...
`--<> enet2_ref_pad
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230131084642.709385-17-o.rempel@pengutronix.de
According to the "i.MX 6UltraLite Applications Processor Reference Manual,
Rev. 2, 03/2017", BIT(13) is ENET1_125M_EN which is not controlling root
of PLL6. It is controlling ENET1 separately.
So, instead of this picture (implementation before this patch):
fec1 <- enet_ref (divider) <---------------------------,
|- pll6_enet (gate)
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
we should have this one (after this patch):
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
|- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
With this fix, the RMII reference clock will be turned off, after
setting network interface down on each separate interface
(ip l s dev eth0 down). Which was not working before, on system with both
FECs enabled.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230131084642.709385-16-o.rempel@pengutronix.de
Add ethernet refclock mux support and set it to internal clock by
default. This configuration will not affect existing boards since
machine code currently overwrites this default.
The machine code will be fixed in a separate patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230131084642.709385-3-o.rempel@pengutronix.de
The SOFT_RESET_REBOOT register is needed to recover CS42L42 state after
a Soundwire bus reset.
This is required to be set whenever there is severe/hard bus reset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, port_prep callback only has commands for PRE_PREP, PREP,
and POST_PREP, which doesn't directly say whether this is for a
prepare or deprepare call. Extend the command list enum to say
whether the call is for prepare or deprepare aswell.
Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused,
and update this enum to be simpler and more consistent with enum
sdw_clk_stop_type.
Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec
drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both
of which seem to assume that POST_PREP only occurs after a prepare,
even though it would also have occurred after a deprepare. Since it
doesn't make sense to mark the port prepared after a deprepare, changing
the enum to separate PORT_DEPREP from PORT_PREP should make the check
for PORT_PREP in those drivers be more logical.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127165111.3010960-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A previous patch removed unnecessary zeroing of the page registers
after a paged transaction, so now the reset_page_addr callback is
unused and can be removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230123164949.245898-3-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The commit 848dba781f ("container_of: remove container_of_safe()")
removed the code that uses err.h. Replace the inclusion by stddef.h
which provides offsetof() definition which is still in use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230130111746.59830-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While we normally encourage devm usage by drivers, some consumers (and
in particular the upcoming Rust abstractions) might want to manually
manage memory. Export the raw functions to make this possible.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
This allows downstream consumers to keep track of private data for shmem
mappings. In particular, the Rust abstraction will use this to safely
drop data associated with a mapping when it is unmapped.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is yet another low power mode, used by DCP.
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge v6.2-rc6 into drm-next
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Current snd_soc_dai has data for Playback/Capture, but it is very
random. Someone is array (A), someone is playback/capture (B),
and someone is tx/rx (C);
struct snd_soc_dai {
...
(A) unsigned int stream_active[SNDRV_PCM_STREAM_LAST + 1];
(B) struct snd_soc_dapm_widget *playback_widget;
(B) struct snd_soc_dapm_widget *capture_widget;
(B) void *playback_dma_data;
(B) void *capture_dma_data;
...
(C) unsigned int tx_mask;
(C) unsigned int rx_mask;
};
Because of it, the code was very complicated.
This patch creates new data structure to merge these into one,
and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87cz6vea1v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC framework/driver checks whether card was instantiated every
where. Then, it should check card pointer too in such case.
This patch adds snd_soc_card_is_instantiated() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/875ycnfoqp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_get_widget() requests SNDRV_PCM_STREAM_PLAYBACK/CAPTURE.
This patch adds helper for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/877cx3foqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has tx/rx_mask, and is directly accessing to them,
but accessing to it via function is nice idea.
This patch adds snd_soc_dai_tdm_mask_set/get() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/878rhjfor8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_dai_set/get_dma_data() which is assuming
struct snd_pcm_substream to get Playback/Capture direction.
But, many drivers want to use it not through snd_pcm_substream.
This patch adds more low level snd_soc_dai_dma_data_set/get() for it,
and previous functions will be macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87a61zfori.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_dai_get_widget() (= _get_) but doesn't
have _set_ function. This patch adds it.
This patch also cleanup unnecessary line break for _get_ function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87bkmfforp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have two types for UUIDs depending on the byte ordering.
Instead of explaining how bytes should go over the wire,
use dedicated APIs and data types. This removes a confusion
over the byte ordering.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-By: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/20230125143425.85268-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since v4l2_fill_fmtdesc will be called in the ioctl v4l_enum_fmt anyway.
We can set the format description and compressed flag from v4l_fill_fmtdesc
and can remove the extra name field in uvc_format_desc.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230126231456.3402323-6-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the uvc_fmts array can not be modified we declare it const and
change every user of the uvc_format_by_guid function aswell.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The media driver USB_VIDEO_CLASS and USB_F_UVC are using the same
function uvc_format_by_guid. Since the function is inline, every user
will get a copy of the used uvc_fmts array and the function. This patch
moves the code to an own compile unit and add this dependency as
UVC_COMMON to both users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the headerfile is only used in usb devices it is better
placed with the other usb files.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Cypress EZUSB FX3 UVC example can be configured to report pixel
format "e436eb7e-524f-11ce-9f53-0020af0ba770". This is its GUID for
BGRA/X 8:8:8:8.
The UVC 1.5 spec [1] only defines GUIDs for YUY2, NV12, M420 and I420.
This seems to be an extension documented in the Microsoft Windows Media
Format SDK[2]. This Media Format SDK defines this GUID as corresponding
to `MEDIASUBTYPE_RGB32`, which is confirmed by [4] as `MEDIASUBTYPE_ARGB32`
has different GUID.
Note that in my case, the FX3 UVC can output either channel order,
BGR or RGB or any other mix for that matter. Since Linux commit
1b8dc32286 ("[media] uvcvideo: Add GUID for BGR 8:8:8")
defined a GUID for `MEDIASUBTYPE_RGB24` channel order as BGR, keep
this change consistent and define `MEDIASUBTYPE_RGB32` as BGR as well.
Document [3] also indicates the channel order is BGR.
[1] https://www.usb.org/document-library/video-class-v15-document-set
[2] https://learn.microsoft.com/en-us/windows/win32/wmformat/media-type-identifiers
[3] https://learn.microsoft.com/en-us/windows/win32/directshow/uncompressed-rgb-video-subtypes
[4] https://gix.github.io/media-types/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCY8R0CCIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95k3XwBAMn3MAcX185i
DNPc1tWKCA0+j7eLqgCrNHOQgqYSV7ZOAQDaoDt/drJffp8S9TdCpP1DhT9wcSIB
i6i6j7mlzGsqBw==
=yAlT
-----END PGP SIGNATURE-----
Merge tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into usb-next
Merge in this tag from the media tree so that future USB uvc patches
will apply properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux: (27 commits)
media: uvcvideo: Silence memcpy() run-time false positive warnings
media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
media: uvcvideo: Fix race condition with usb_kill_urb
media: uvcvideo: Use standard names for menus
media: uvcvideo: Fix power line control for Lenovo Integrated Camera
media: uvcvideo: Refactor power_line_frequency_controls_limited
media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
media: uvcvideo: Extend documentation of uvc_video_clock_decode()
media: uvcvideo: Limit power line control for Acer EasyCamera
media: uvcvideo: Refactor __uvc_ctrl_add_mapping
media: uvcvideo: Fix handling on Bitmask controls
media: uvcvideo: Do not return positive errors in uvc_query_ctrl()
media: uvcvideo: Return -EACCES for Wrong state error
media: uvcvideo: Improve error logging in uvc_query_ctrl()
media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
media: uvcvideo: Factor out usb_string() calls
media: uvcvideo: Limit power line control for Acer EasyCamera
media: uvcvideo: Recover stalled ElGato devices
media: uvcvideo: Remove void casting for the status endpoint
...
cc2520 supports both probing from static platform_data and
from devicetree, but there have never been any definitions
of the platform data in the mainline kernel, so it's safe
to assume that only the DT path is used.
After folding cc2520_platform_data into the driver itself,
the GPIO handling can be simplified by moving to the modern
gpiod interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230126161658.2983292-1-arnd@kernel.org
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The VSC7514 target regmap is identical for ones shared with similar
hardware, specifically the VSC7512. Share this resource, and change the
name to match the pattern of other exported resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resetting the switch core is the same whether it is done internally or
externally. Move this routine to the ocelot library so it can be used by
other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vcap_props structure is common to other devices, specifically the
VSC7512 chip that can only be controlled externally. Export this structure
so it doesn't need to be recreated.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ocelot_regfields struct is common between several different chips, some
of which can only be controlled externally. Export this structure so it
doesn't have to be duplicated in these other drivers.
Rename the structure as well, to follow the conventions of other shared
resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose ocelot_wm functions so they can be shared with other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add CAP for crypto offload, do the simple initialization if hardware
supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be
created in one bulk allocation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change the naming of key type in DEK fields and macros, to be
consistent with the device spec.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add and extend structure layouts and defines for fast crypto key
update. This is a prerequisite to support bulk creation, key
modification and destruction, software wrapped DEK, and SYNC_CRYPTO
command.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before this patch, the log_obj_range was defined inside
general_obj_in_cmd_hdr to support bulk allocation. However, we need to
modify/query one of the object in the bulk in later patch, so change
those fields to param bits for parameters specific for cmd header, and
add general_obj_create_param according to what was updated in spec.
We will also add general_obj_query_param for modify/query later.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add MT7981 clock dt-bindings, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e353d32b5a4481766519a037afe1ed44e31ece1a.1674703830.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The pata_parport is a libata-based replacement of the old PARIDE
subsystem - driver for parallel port IDE devices.
It uses the original paride low-level protocol drivers but does not
need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices
behind parallel port adapters are handled by the ATA layer.
This will allow paride and its high-level drivers to be removed.
Unfortunately, libata drivers cannot sleep so pata_parport claims
parport before activating the ata host and keeps it claimed (and
protocol connected) until the ata host is removed. This means that
no devices can be chained (neither other pata_parport devices nor
a printer).
paride and pata_parport are mutually exclusive because the compiled
protocol drivers are incompatible.
Tested with:
- Imation SuperDisk LS-120 and HP C4381A (EPAT)
- Freecom Parallel CD (FRPW)
- Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ)
- Backpack CD-RW 222011 and CD-RW 19350 (BPCK6)
The following bugs in low-level protocol drivers were found and will
be fixed later:
Note: EPP-32 mode is buggy in EPAT - and also in all other protocol
drivers - they don't handle non-multiple-of-4 block transfers
correctly. This causes problems with LS-120 drive.
There is also another bug in EPAT: EPP modes don't work unless a 4-bit
or 8-bit mode is used first (probably some initialization missing?).
Once the device is initialized, EPP works until power cycle.
So after device power on, you have to:
echo "parport0 epat 0" >/sys/bus/pata_parport/new_device
echo pata_parport.0 >/sys/bus/pata_parport/delete_device
echo "parport0 epat 4" >/sys/bus/pata_parport/new_device
(autoprobe will initialize correctly as it tries the slowest modes
first but you'll get the broken EPP-32 mode)
Note: EPP modes are buggy in FRPW, only modes 0 and 1 work.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmPYCVAACgkQb7wzTHR8
rCgn8g//csD+K8oI/IvvY61EiTO/3P+tBgVSphKGgxeVPVJ28nSkqSXaCp7PzgOq
IWKxfjIzX0IHtJ9Kdm0+P0966FzGz9dS1wo9yIW8/z5ZJ63RStRqW72Kg+99dC+w
T1k+JwqUY/qYYEqkYlOV2QzTNCAjDLKokI6gReSvsDeLJw7r9RMkh3xjYRieuIPE
g3anUadyVY7IEPJ/Jt1b6veolAV7vZmYO7fRzoXlhYh+KijSAqAKb16nygl1u1AR
BN1Db8rSIYFPdhMl2b/JEywCf2GO25DYDjczHt5tffzMNgFvbWce8CmQLYvXm7oR
303GM1tBY6ACgRzSIw9R7+1MRpCz90ftimK48HGq+6Gr93eJ+87OAwZMJf7pZktN
xCF73hqkXxIG9p47qhnAsg4StWqpkT7/YpicBwoRWqVx4gAhXxtVesO3bpB2C3Eg
8u+Fpmo2lTIxepRXsemDaMfRfJxk/bChiVGls7FLHHPgQfKuuaSMcApvx0FyWDen
m4AJ8tuWJ7mbOpzZUbaUb3zi1vpdrNmucf56YLjHS24zGgq1dha5iBwRDAYHOUgf
t5OiiYtVMNlUvFbL/yWlrc/bUxs2lqlzUhWAj+ixopP9bIAVMHz2i+vResgNcFI5
fRnSkZszV3kEltiEGD3iyeplp5rE9Ijdpkwde2KhMR7zmbPdDx0=
=ZLEJ
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.3-1
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
Commit 3db1de0e58 ("f2fs: change the current atomic write way")
removed old tracepoints, but it missed to add new one, this patch
fixes to introduce trace_f2fs_replace_atomic_write_block to trace
atomic_write commit flow.
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
-----BEGIN PGP SIGNATURE-----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=OkGG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=871y
-----END PGP SIGNATURE-----
Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ, add check if one of the
inputs is NULL and fail if this is the case.
Currently, the kernel crashes if one of the inputs is NULL. Instead,
fail the test and add an appropriate error message.
Fixes: b8a926bea8 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros")
This was found by the kernel test robot:
https://lore.kernel.org/all/202212191448.D6EDPdOh-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Jason Gunthorpe says:
====================
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
====================
* 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/s390: Use GFP_KERNEL in sleepable contexts
iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
iommu/intel: Use GFP_KERNEL in sleepable contexts
iommu/intel: Support the gfp argument to the map_pages op
iommu/intel: Add a gfp parameter to alloc_pgtable_page()
iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
iommu: Add a gfp parameter to iommu_map_sg()
iommu: Remove iommu_map_atomic()
iommu: Add a gfp parameter to iommu_map()
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
struct snd_soc_dobj only needs pointer to the unload function, instead
however, there is pointer to all topology operations. Change code to use
the function pointer instead of pointer to structure containing all
operations.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform. In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
- GPLUS FL8005A
- Google Zombie with LTE and NVMe
- Google Zombie with NVMe
- Lenovo Tab P11
- Motorola G5 Plus
- Motorola G7 Power
- Motorola Moto G6
- Samsung Galaxy J5 (2016)
- Samsung Galaxy Tab A 8.0
- Samsung Galaxy Tab A 9.7
- Xiaomi Mi A1
- Xiaomi Mi A2 Lite
- Xiaomi Redmi 5 Plus
- Xiaomi Redmi Note 4X
On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.
On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.
Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.
On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.
MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.
On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.
On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.
SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.
On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.
Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.
SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced. Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.
On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.
On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.
Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.
On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.
For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.
On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers. GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.
Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.
Lastly, the work continue to align Devicetree source with bindings
across all platforms.
-----BEGIN PGP SIGNATURE-----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=I+bB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E5w0
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 Devicetree updates for v6.3
This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform. In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
- GPLUS FL8005A
- Google Zombie with LTE and NVMe
- Google Zombie with NVMe
- Lenovo Tab P11
- Motorola G5 Plus
- Motorola G7 Power
- Motorola Moto G6
- Samsung Galaxy J5 (2016)
- Samsung Galaxy Tab A 8.0
- Samsung Galaxy Tab A 9.7
- Xiaomi Mi A1
- Xiaomi Mi A2 Lite
- Xiaomi Redmi 5 Plus
- Xiaomi Redmi Note 4X
On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.
On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.
Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.
On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.
MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.
On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.
On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.
SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.
On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.
Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.
SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced. Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.
On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.
On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.
Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.
On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.
For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.
On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers. GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.
Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.
Lastly, the work continue to align Devicetree source with bindings
across all platforms.
* tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (320 commits)
arm64: dts: qcom: sc7280: Add a carveout for modem metadata
arm64: dts: qcom: sc7180: Add a carveout for modem metadata
arm64: dts: qcom: sdm845: Add a carveout for modem metadata
arm64: dts: qcom: msm8998: Add a carveout for modem metadata
arm64: dts: qcom: msm8996: Add a carveout for modem metadata
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
arm64: dts: qcom: sm8250: drop unused properties from tx-macro
arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
arm64: dts: qcom: align OPP table node name with DT schema
arm64: dts: qcom: rename mdp nodes to display-controller
...
Link: https://lore.kernel.org/r/20230126202528.3691539-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Merge of immutable bindings branch with Reset & power domain binding
- Addition of NNA power domain for A311D SoC
- meson_sm.txt conversionto dt-schema
- mark amlogic,meson-gx-pwrc bindings as deprecated
- fix of meson_sm driver by using NULL instead of 0
-----BEGIN PGP SIGNATURE-----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=+uBi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1+2i
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic Drivers changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- Addition of NNA power domain for A311D SoC
- meson_sm.txt conversionto dt-schema
- mark amlogic,meson-gx-pwrc bindings as deprecated
- fix of meson_sm driver by using NULL instead of 0
* tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson_sm: stop using 0 as NULL pointer
dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated
dt-bindings: firmware: convert meson_sm.txt to dt-schema
soc: amlogic: meson-pwrc: Add NNA power domain for A311D
dt-bindings: power: Add G12A NNA power domain
dt-bindings: reset: meson-g12a: Add missing NNA reset
Link: https://lore.kernel.org/r/ec9552d8-96df-a677-ab94-9723f5c30f1c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the dummy pwm_capture(), to make the declaration order of all
dummies to match the declaration order of the real functions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The existing no-op shims for when PM_DEVFREQ (or an individual governor)
only do half the job. The governor specific config/tuning structs need
to be available to avoid compile errors in drivers using devfreq.
Fixes: 6563f60f14 ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Patchwork: https://patchwork.freedesktop.org/patch/519801/
Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com
It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCY9A3iwAKCRB4tDGHoIJi
0qE4AQDPCcoarT/vLZ28H4wBHPUBxnmU1rut3uNM4f1lIqK0PgD+N6N3xGajmVy0
UzD8/qg2gua94rx/2dmE4PWvun+newk=
=Lqa0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Dfx0
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.3-mw0
It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: starfive: Add StarFive JH71XX pmu driver
dt-bindings: power: Add starfive,jh7110-pmu
soc: sifive: ccache: Add StarFive JH7110 support
dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC
Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GPIO library for OF is the only user for enum of_gpio_flags.
Move it there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
