Add struct for iio type arrays such as IIO_AVAIL_LIST which can be used
instead of int arrays.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221201072220.402585-2-gerald.loacker@wolfvision.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add another power saving state used on SM8450. Unfortunately adding it
in proper place causes renumbering of all the opp states in sm8450.dtsi
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207012803.114959-2-dmitry.baryshkov@linaro.org
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c8 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes: 84fef62d13 ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Rudi reports a compilation failure on x86_64 when CONFIG_NET_CLS or
CONFIG_NET_CLS_ACT is not set but CONFIG_RETPOLINE is set.
A misplaced '#endif' was causing the issue.
Fixes: 7f0e810220 ("net/sched: add retpoline wrapper for tc")
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hdmi script already supported in sdma firmware. So add support hdmi
in sdma driver.
The design of hdmi script is different from common script such as sai.
There is no need to config buffer descriptor for HDMI. The cyclic
capability is achieved by the hdmi script. The slave config is so simple,
only config src_addr, dts_addr and direction DMA_TRANS_NONE.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221115093823.2879128-3-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We can merge VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES with
VDPA_ATTR_DEV_FEATURES which is functionally equivalent.
While at it, tweak the comment in header file to make
user provioned device features distinguished from those
supported by the parent mgmtdev device: the former of
which can be inherited as a whole from the latter, or
can be a subset of the latter if explicitly specified.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1665422823-18364-1-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
At the end of rxrpc_recvmsg(), if a call is found, the call is put and then
a trace line is emitted referencing that call in a couple of places - but
the call may have been deallocated by the time those traces happen.
Fix this by stashing the call debug_id in a variable and passing that to
the tracepoint rather than the call pointer.
Fixes: 849979051c ("rxrpc: Add a tracepoint to follow what recvmsg does")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Move id and ref_obj_id fields after scalar data section (var_off and
ranges). This is necessary to simplify next patch which will change
regsafe()'s logic to be safer, as it makes the contents that has to be
an exact match (type-specific parts, off, type, and var_off+ranges)
a single sequential block of memory, while id and ref_obj_id should
always be remapped and thus can't be memcp()'ed.
There are few places that assume that var_off is after id/ref_obj_id to
clear out id/ref_obj_id with the single memset(0). These are changed to
explicitly zero-out id/ref_obj_id fields. Other places are adjusted to
preserve exact byte-by-byte comparison behavior.
No functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The archs that use cputime_to_nsecs() internally provide their own
definition and don't need the fallback. cputime_to_usecs() unused except
in this fallback, and is not defined anywhere.
This removes the final remnant of the cputime_t code from the kernel.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220070705.2958959-1-npiggin@gmail.com
Add the mm_cid field to the rseq_update event, allowing tracers to
follow which mm_cid is observed by user-space, and whether negative
mm_cid values are visible in case of internal scheduler implementation
issues.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-22-mathieu.desnoyers@efficios.com
If a memory map has fewer threads than there are cores on the system, or
is limited to run on few cores concurrently through sched affinity or
cgroup cpusets, the concurrency IDs will be values close to 0, thus
allowing efficient use of user-space memory for per-cpu data structures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-9-mathieu.desnoyers@efficios.com
This feature allows the scheduler to expose a per-memory map concurrency
ID to user-space. This concurrency ID is within the possible cpus range,
and is temporarily (and uniquely) assigned while threads are actively
running within a memory map. If a memory map has fewer threads than
cores, or is limited to run on few cores concurrently through sched
affinity or cgroup cpusets, the concurrency IDs will be values close
to 0, thus allowing efficient use of user-space memory for per-cpu
data structures.
This feature is meant to be exposed by a new rseq thread area field.
The primary purpose of this feature is to do the heavy-lifting needed
by memory allocators to allow them to use per-cpu data structures
efficiently in the following situations:
- Single-threaded applications,
- Multi-threaded applications on large systems (many cores) with limited
cpu affinity mask,
- Multi-threaded applications on large systems (many cores) with
restricted cgroup cpuset per container.
One of the key concern from scheduler maintainers is the overhead
associated with additional spin locks or atomic operations in the
scheduler fast-path. This is why the following optimization is
implemented.
On context switch between threads belonging to the same memory map,
transfer the mm_cid from prev to next without any atomic ops. This
takes care of use-cases involving frequent context switch between
threads belonging to the same memory map.
Additional optimizations can be done if the spin locks added when
context switching between threads belonging to different memory maps end
up being a performance bottleneck. Those are left out of this patch
though. A performance impact would have to be clearly demonstrated to
justify the added complexity.
The credit goes to Paul Turner (Google) for the original virtual cpu id
idea. This feature is implemented based on the discussions with Paul
Turner and Peter Oskolkov (Google), but I took the liberty to implement
scheduler fast-path optimizations and my own NUMA-awareness scheme. The
rumor has it that Google have been running a rseq vcpu_id extension
internally in production for a year. The tcmalloc source code indeed has
comments hinting at a vcpu_id prototype extension to the rseq system
call [1].
The following benchmarks do not show any significant overhead added to
the scheduler context switch by this feature:
* perf bench sched messaging (process)
Baseline: 86.5±0.3 ms
With mm_cid: 86.7±2.6 ms
* perf bench sched messaging (threaded)
Baseline: 84.3±3.0 ms
With mm_cid: 84.7±2.6 ms
* hackbench (process)
Baseline: 82.9±2.7 ms
With mm_cid: 82.9±2.9 ms
* hackbench (threaded)
Baseline: 85.2±2.6 ms
With mm_cid: 84.4±2.9 ms
[1] https://github.com/google/tcmalloc/blob/master/tcmalloc/internal/linux_syscall_support.h#L26
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-8-mathieu.desnoyers@efficios.com
Adding the NUMA node id to struct rseq is a straightforward thing to do,
and a good way to figure out if anything in the user-space ecosystem
prevents extending struct rseq.
This NUMA node id field allows memory allocators such as tcmalloc to
take advantage of fast access to the current NUMA node id to perform
NUMA-aware memory allocation.
It can also be useful for implementing fast-paths for NUMA-aware
user-space mutexes.
It also allows implementing getcpu(2) purely in user-space.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-5-mathieu.desnoyers@efficios.com
Introduce the extensible rseq ABI, where the feature size supported by
the kernel and the required alignment are communicated to user-space
through ELF auxiliary vectors.
This allows user-space to call rseq registration with a rseq_len of
either 32 bytes for the original struct rseq size (which includes
padding), or larger.
If rseq_len is larger than 32 bytes, then it must be large enough to
contain the feature size communicated to user-space through ELF
auxiliary vectors.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-4-mathieu.desnoyers@efficios.com
Export the rseq feature size supported by the kernel as well as the
required allocation alignment for the rseq per-thread area to user-space
through ELF auxiliary vector entries.
This is part of the extensible rseq ABI.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-3-mathieu.desnoyers@efficios.com
These are (uint64_t)-1 magic values are a userspace ABI, allowing the
shared info pages and other enlightenments to be disabled. This isn't
a Xen ABI because Xen doesn't let the guest turn these off except with
the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is
expected to handle soft reset, and tear down the kernel parts of the
enlightenments accordingly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the power domain index for the A3DUL domain, as described in the
R-Car V4H Series Hardware User's Manual Rev. 0.51 and later.
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
[geert: Manual reference]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/d61cf54b58629a76e007b9505dac7c2beb3b30db.1669740926.git.geert+renesas@glider.be
Add callback to handle loading of kcontrol and linking it to active
widget. In order to link kcontrol to specific modules add additional
field to module data, as well as specify control id in kcontrol data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- improve p9_check_errors to check buffer size instead of msize when possible
(e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
-----BEGIN PGP SIGNATURE-----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=xLkl
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
A few more updates for 6.2 since the last PR: most of changes are
about ASoC device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmOlhFcOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/urxAAg4UNnglVwZ5yGNndo2Im6kf++aZbwsPMjTFS
VIfPLD2UFs+s7SOnHYv+Gaai1fhv39bMyg4IsSJvH/kyi/5iWUf85fW7W+xK701N
rWwkvEpmjpla/ojisryF+Liy0in3hc/YgrNPlxzTL5uExcHTmBA8mw44wjxnWPwB
eS31HowboL9aSeUBMmZma6wME7lVqzOAogIG2q8Pj1VucaE2MLGAtSeJLzy5Bnhm
QTG66EmybxNbwRZuv3+CNv6t8Lo/WcwRJ3iReOePc/ePDqreGYfrKeVGhDLt+P5J
owagDBDLLs+DZ9UuCFg/Td0ncZufTYYkg2KDQgOeSInVj8NeSFBbDbYQp89qwkSq
mxfyoFS9Jx6CWiI/F0P9SOhIYbePLZfYyHZHj7yiGCGX2x+ZaOtKrPkvzmxw38cb
nbmBbHmcwRpYirNeOtVPiBKOaIt6i9rzmfGiy9LeMScYd6Jjuq2xWOG+z9zWHxun
EQHu3vqW/6DJRgfw4k/KcrrGzT3m71UxMd1jSL+Veb6Fv9wTrCeG95YNA3k6B2nO
Xr1nNFCPzKqfYizRLGGjTy4SSNzDQXjt1O0vbbtrfAJ4iK+as5tNqObUMO6ItUoY
6JMQyyKHLgyE+1KdrE0ltZYoP6LZ60rTFDTQBMXMb+S5CXz5k9JbmlL7790tL+VL
/3cSm64=
=2Uko
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few more updates for 6.2: most of changes are about ASoC
device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks"
* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
ASoC: lochnagar: Fix unused lochnagar_of_match warning
ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
ASoC: SOF: mediatek: initialize panic_info to zero
ASoC: rt5670: Remove unbalanced pm_runtime_put()
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: mediatek: mt8195: add sof be ops to check audio active
ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
ALSA: hda/hdmi: fix i915 silent stream programming flow
ALSA: hda: Error out if invalid stream is being setup
ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
ASoC: codecs: wcd-clsh: Remove the unused function
...
Mostly small bug fixes and small updates. The only things of note is
a qla2xxx fix for crash on hotplug and timeout and the addition of a
user exposed abstraction layer for persistent reservation error return
handling (which necessitates the conversion of nvme.c as well as
SCSI).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY6SZISYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQkdAP9Juri0
ihkyA9tVx1ZslVOp8V8mWK3P2VROA4ArvcMRVwD/Qxf2REP8Fx2GIgC0sNaRedg3
+ncveg3EpZ1n/NXXeDw=
=q+XO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Introduce the ability to track requests for the addition of DRM debugfs
files at any time and have them added all at once during
drm_dev_register().
Drivers can add DRM debugfs files to a device-managed list and, during
drm_dev_register(), all added files will be created at once.
Now, the drivers can use the functions drm_debugfs_add_file() and
drm_debugfs_add_files() to create DRM debugfs files instead of using the
drm_debugfs_create_files() function.
Co-developed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-2-mcanal@igalia.com
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set timeout and garbage collection interval updates are ignored on
updates. Add transaction to update global set element timeout and
garbage collection interval.
Fixes: 96518518cc ("netfilter: add nftables")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=TSec
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
- fixes
- per-PHY LED support
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iF0EABECAB0WIQR10Rp9kadxD0kAQu/XfRQdAqdu9QUCY5NYWQAKCRDXfRQdAqdu
9bUrAJ46VwPmamfkZXKDj41IoNdcmvW/iwCfQD1F1KnrWxsqcglcKTX0GvEdm4s=
=Gy5L
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2022-12-09' of https://github.com/nbd168/wireless
mt76 patches for 6.2
- fixes
- per-PHY LED support
Various changes across the board, mostly improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=IM51
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes across the board, mostly improvements and cleanups"
* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
pwm: pca9685: Convert to i2c's .probe_new()
pwm: sun4i: Propagate errors in .get_state() to the caller
pwm: Handle .get_state() failures
pwm: sprd: Propagate errors in .get_state() to the caller
pwm: rockchip: Propagate errors in .get_state() to the caller
pwm: mtk-disp: Propagate errors in .get_state() to the caller
pwm: imx27: Propagate errors in .get_state() to the caller
pwm: cros-ec: Propagate errors in .get_state() to the caller
pwm: crc: Propagate errors in .get_state() to the caller
leds: qcom-lpg: Propagate errors in .get_state() to the caller
drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
pwm/tracing: Also record trace events for failed API calls
pwm: Make .get_state() callback return an error code
pwm: pxa: Enable for MMP platform
pwm: pxa: Add reference manual link and limitations
pwm: pxa: Use abrupt shutdown mode
pwm: pxa: Remove clk enable/disable from pxa_pwm_config
pwm: pxa: Set duty cycle to 0 when disabling PWM
pwm: pxa: Remove pxa_pwm_enable/disable
pwm: mediatek: Add support for MT7986
...
rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with and
attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled.
-----BEGIN PGP SIGNATURE-----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=sO5/
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
- ti: default to ARCH_K3 for msg manager
- mediatek: add mt8188 and mt8186 support
request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
-----BEGIN PGP SIGNATURE-----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=j33p
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
- New Functionality
- Add support for multiple devices of the same type; rk808
- Fix-ups
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
- Bug Fixes
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008
-----BEGIN PGP SIGNATURE-----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=HT19
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
Add the following fields to the set description:
- key type
- data type
- object type
- policy
- gc_int: garbage collection interval)
- timeout: element timeout
This prepares for stricter set type checks on updates in a follow up
patch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY6HAHgAKCRCRxhvAZXjc
ou/mAQDDaks5QRtDT88OAI1fMWhSz9IZHsxCOeNQ1hdvWvKZkQD+LCbjmRFG3aB4
Br7ZjHSmVDug/pQEV6FVDg4LpwYZUQo=
=Sab+
-----END PGP SIGNATURE-----
Merge tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid cleanup from Christian Brauner:
"This moves the ima specific vfs{g,u}id_t comparison helpers out of the
header and into the one file in ima where they are used.
We shouldn't incentivize people to use them by placing them into the
header. As discussed and suggested by Linus in [1] let's just define
them locally in the one file in ima where they are used"
Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]
* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
mnt_idmapping: move ima-only helpers to ima
-----BEGIN PGP SIGNATURE-----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=IBNq
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
other trees:
- #include <asm/archrandom.h> can be removed from random.h now,
making the direct use of the arch_random_* API more of a private
implementation detail between the archs and random.c, rather than
something for general consumers.
- Two additional uses of prandom_u32_max() snuck in during the
initial phase of pulls, so these have been converted to
get_random_u32_below(), and now the deprecated prandom_u32_max()
alias -- which was just a wrapper around get_random_u32_below() --
can be removed.
In addition, there is one fix:
- Check efi_rt_services_supported() before attempting to use an EFI
runtime function.
This affected EFI systems that disable runtime services yet still
boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
well systems where EFI runtime services have been forcibly
disabled, such as on PREEMPT_RT.
On those machines, a very early and hard to diagnose crash would
happen, preventing boot"
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove prandom_u32_max()
efi: random: fix NULL-deref when refreshing seed
random: do not include <asm/archrandom.h> from random.h
There are only three fairly simple patches. The #include
change to linux/swab.h addresses a userspace build issue,
and the change to the mmio tracing logic helps provide
more useful traces.
-----BEGIN PGP SIGNATURE-----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=05F5
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are only three fairly simple patches.
The #include change to linux/swab.h addresses a userspace build issue,
and the change to the mmio tracing logic helps provide more useful
traces"
* tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info
include/uapi/linux/swab: Fix potentially missing __always_inline
HID descriptors with Battery System (0x85) Charging (0x44) usage are
ignored and POWER_SUPPLY_STATUS_DISCHARGING is always reported to user
space, even when the device is charging.
Map this usage and when it is reported set the right charging status.
In addition, add KUnit tests to make sure that the charging status is
correctly set and reported. They can be run with the usual command:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/hid
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The known LUID table for established/known custom HID sensors was
limited to sensors with "INTEL" as manufacturer. But some vendors such
as Lenovo also include fairly standard iio sensors (e.g. ambient light)
in their custom sensors.
Expand the known custom sensors table by a tag used for the platform
device name and match sensors based on the LUID as well as optionally
on model and manufacturer properties.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().
Then, with no more users left, we can finally remove the deprecated
function.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that in-kernel socket users that may recurse during reclaim have benn
converted to sk_use_task_frag = false, we can have sk_page_frag() simply
check that value.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sockets that can be used while recursing into memory reclaim, like
those used by network block devices and file systems, mustn't use
current->task_frag: if the current process is already using it, then
the inner memory reclaim call would corrupt the task_frag structure.
To avoid this, sk_page_frag() uses ->sk_allocation to detect sockets
that mustn't use current->task_frag, assuming that those used during
memory reclaim had their allocation constraints reflected in
->sk_allocation.
This unfortunately doesn't cover all cases: in an attempt to remove all
usage of GFP_NOFS and GFP_NOIO, sunrpc stopped setting these flags in
->sk_allocation, and used memalloc_nofs critical sections instead.
This breaks the sk_page_frag() heuristic since the allocation
constraints are now stored in current->flags, which sk_page_frag()
can't read without risking triggering a cache miss and slowing down
TCP's fast path.
This patch creates a new field in struct sock, named sk_use_task_frag,
which sockets with memory reclaim constraints can set to false if they
can't safely use current->task_frag. In such cases, sk_page_frag() now
always returns the socket's page_frag (->sk_frag). The first user is
sunrpc, which needs to avoid using current->task_frag but can keep
->sk_allocation set to GFP_KERNEL otherwise.
Eventually, it might be possible to simplify sk_page_frag() by only
testing ->sk_use_task_frag and avoid relying on the ->sk_allocation
heuristic entirely (assuming other sockets will set ->sk_use_task_frag
according to their constraints in the future).
The new ->sk_use_task_frag field is placed in a hole in struct sock and
belongs to a cache line shared with ->sk_shutdown. Therefore it should
be hot and shouldn't have negative performance impacts on TCP's fast
path (sk_shutdown is tested just before the while() loop in
tcp_sendmsg_locked()).
Link: https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch allows to remove TUNNEL_KEY from the tunnel flags bitmap
when using bpf_skb_set_tunnel_key by providing a BPF_F_NO_TUNNEL_KEY
flag. On egress, the resulting tunnel header will not contain a tunnel
key if the protocol and implementation supports it.
At the moment bpf_tunnel_key wants a user to specify a numeric tunnel
key. This will wrap the inner packet into a tunnel header with the key
bit and value set accordingly. This is problematic when using a tunnel
protocol that supports optional tunnel keys and a receiving tunnel
device that is not expecting packets with the key bit set. The receiver
won't decapsulate and drop the packet.
RFC 2890 and RFC 2784 GRE tunnels are examples where this flag is
useful. It allows for generating packets, that can be decapsulated by
a GRE tunnel device not operating in collect metadata mode or not
expecting the key bit set.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221218051734.31411-1-cehrig@cloudflare.com
Both bpf_trace_printk and bpf_trace_vprintk helpers use static buffer guarded
with trace_printk_lock spin lock.
The spin lock contention causes issues with bpf programs attached to
contention_begin tracepoint [1][2].
Andrii suggested we could get rid of the contention by using trylock, but we
could actually get rid of the spinlock completely by using percpu buffers the
same way as for bin_args in bpf_bprintf_prepare function.
Adding new return 'buf' argument to struct bpf_bprintf_data and making
bpf_bprintf_prepare to return also the buffer for printk helpers.
[1] https://lore.kernel.org/bpf/CACkBjsakT_yWxnSWr4r-0TpPvbKm9-OBmVUhJb7hV3hY8fdCkw@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CACkBjsaCsTovQHFfkqJKto6S4Z8d02ud1D7MPESrHa1cVNNTrw@mail.gmail.com/
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221215214430.1336195-4-jolsa@kernel.org
Currently we always cleanup/decrement bpf_bprintf_nest_level variable
in bpf_bprintf_cleanup if it's > 0.
There's possible scenario where this could cause a problem, when
bpf_bprintf_prepare does not get bin_args buffer (because num_args is 0)
and following bpf_bprintf_cleanup call decrements bpf_bprintf_nest_level
variable, like:
in task context:
bpf_bprintf_prepare(num_args != 0) increments 'bpf_bprintf_nest_level = 1'
-> first irq :
bpf_bprintf_prepare(num_args == 0)
bpf_bprintf_cleanup decrements 'bpf_bprintf_nest_level = 0'
-> second irq:
bpf_bprintf_prepare(num_args != 0) bpf_bprintf_nest_level = 1
gets same buffer as task context above
Adding check to bpf_bprintf_cleanup and doing the real cleanup only if we
got bin_args data in the first place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221215214430.1336195-3-jolsa@kernel.org
Adding struct bpf_bprintf_data to hold bin_args argument for
bpf_bprintf_prepare function.
We will add another return argument to bpf_bprintf_prepare and
pass the struct to bpf_bprintf_cleanup for proper cleanup in
following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221215214430.1336195-2-jolsa@kernel.org
