There are few major updates in the SoC specific drivers, mainly the usual
reworks and support for variants of the existing SoC. While this remains
Arm centric for the most part, the branch now also contains updates to
risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants
(MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the
soc ID, rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in
the memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive,
TI, Mediatek and Marvell SoC drivers
-----BEGIN PGP SIGNATURE-----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=heNV
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are few major updates in the SoC specific drivers, mainly the
usual reworks and support for variants of the existing SoC. While this
remains Arm centric for the most part, the branch now also contains
updates to risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants (MSM8956,
MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in the
memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
Mediatek and Marvell SoC drivers"
* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
...
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmORzR4THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXkqCCACFwHz04iepLE7R8ZZ6BVUhD6uzfzDo
s1j7ozOUGUe3vI6q0DElHWVQZgzIzLypVsfWkZToe6jeOU6R48b0tZSFyJCUNwGM
ogmS7N8fBdHfY9SBFoUPoziBifXpf3kq4hhX/w+1Lge9CN5Ywc4KjuJb91EAInbs
lm47O4KQY8w8A7BbPBHYBueUVWLvgwPRPOS032zqxN1787m2tCxpqkfnImK39kh6
IsBBIZfYsok0H5wldhZXnsARpEOeFF6BoFBXpFPlmnbv2VcK2AfZgTYdA3ESyEgd
NyOFDfh6BO07gTR1xCH6gvOpkHwx6xKAkjE36RymdhXS6fhRCRsfahVB
=m78g
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCY5IPvRIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9KxNAD/cECp/hs/8WyYz1FbVjGXtRfXqf2tGWZs
pZ368W8/jUYBAMBl9qk669H8tnxveemzNzTjsKNPaaWCgiBEd0CtfSsC
=yK/t
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"A random collection of TPM fixes and one bug fix for trusted keys"
* tag 'tpmdd-next-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: st33zp24: remove pointless checks on probe
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
tpm: acpi: Call acpi_put_table() to fix memory leak
tpm: Add flag to use default cancellation policy
tpm: tis_i2c: Fix sanity check interrupt enable mask
KEYS: trusted: tee: Make registered shm dependency explicit
tpm: Avoid function type cast of put_device()
tpm: st33zp24: switch to using gpiod API
tpm: st33zp24: drop support for platform data
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmOTQvYACgkQ4CHKc/GJ
qRCaqQf/UjCDmj1vYKcsTzp5L4MDXdQPA7dKtytbnZtROtClVNUzB0jODsfeMI7C
SwbDJRoUU1y99GRFYIx9oGji1q7TYOWS/PsZxOGkv8ILommmQ1kJdZdxt9rOqYNg
3mjCZoQmZMIRipLDrN55C096Mi+mI89kkE4Lkyrigpmxvc0KyX6QBerr+VmaBMHw
DjmFC6Gj+ZH2AX6z7AzOF1gZ42gPBQUjWdHFRcY41dShOQZNl2FPT5ITAvotlJlH
9mj6woCqW936UOcpUl+Qqk7mekDJb1hqmYXV2VAlhprBi6Vcd9PU6GmPPb6w51bS
HkSNNYjkbuNxBXY13PUPcR0hEHv9zw==
=AlWx
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLOB deprecation and SLUB_TINY
The SLOB allocator adds maintenance burden and stands in the way of
API improvements [1]. Deprecate it by renaming the config option (to
make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
SLUB should be used instead as SLAB will be the next on the removal
list.
Based on reports from a riscv k210 board with 8MB RAM, add a
CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
expense of scalability. This has resolved the k210 regression [2] so
in case there are no others (that wouldn't be resolvable by further
tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.
Existing defconfigs with CONFIG_SLOB are converted to
CONFIG_SLUB_TINY.
- kmalloc() slub_debug redzone improvements
A series from Feng Tang that builds on the tracking or requested size
for kmalloc() allocations (for caches with debugging enabled) added
in 6.1, to make redzone checks consider the requested size and not
the rounded up one, in order to catch more subtle buffer overruns.
Includes new slub_kunit test.
- struct slab fields reordering to accomodate larger rcu_head
RCU folks would like to grow rcu_head with debugging options, which
breaks current struct slab layout's assumptions, so reorganize it to
make this possible.
- Miscellaneous improvements/fixes:
- __alloc_size checking compiler workaround (Kees Cook)
- Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
- Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
- Correct SLUB's percpu allocation estimates (Baoquan He)
- Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
- Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
- Dead code removal in SLUB (Hyeonggon Yoo)
* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
mm, slub: split out allocations from pre/post hooks
mm/slub, kunit: Add a test case for kmalloc redzone check
mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
mm, slub: refactor free debug processing
mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
mm, slub: add CONFIG_SLUB_TINY
mm, slab: ignore hardened usercopy parameters when disabled
slab: Remove special-casing of const 0 size allocations
slab: Clean up SLOB vs kmalloc() definition
mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
mm/migrate: make isolate_movable_page() skip slab pages
mm/slab: move and adjust kernel-doc for kmem_cache_alloc
mm/slub, percpu: correct the calculation of early percpu allocation size
...
-----BEGIN PGP SIGNATURE-----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=1PTZ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
this_cpu_inc() on strong load-store architectures.
- Introduce new console_list_lock to synchronize a manipulation of the
list of registered consoles and their flags.
This is a first step in removing the big-kernel-lock-like behavior of
console_lock(). This semaphore still serializes console->write()
calbacks against:
- each other. It primary prevents potential races between early
and proper console drivers using the same device.
- suspend()/resume() callbacks and init() operations in some
drivers.
- various other operations in the tty/vt and framebufer
susbsystems. It is likely that console_lock() serializes even
operations that are not directly conflicting with the
console->write() callbacks here. This is the most complicated
big-kernel-lock aspect of the console_lock() that will be hard
to untangle.
- Introduce new console_srcu lock that is used to safely iterate and
access the registered console drivers under SRCU read lock.
This is a prerequisite for introducing atomic console drivers and
console kthreads. It will reduce the complexity of serialization
against normal consoles and console_lock(). Also it should remove the
risk of deadlock during critical situations, like Oops or panic, when
only atomic consoles are registered.
- Check whether the console is registered instead of enabled on many
locations. It was a historical leftover.
- Cleanly force a preferred console in xenfb code instead of a dirty
hack.
- A lot of code and comment clean ups and improvements.
* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
printk: htmldocs: add missing description
tty: serial: sh-sci: use setup() callback for early console
printk: relieve console_lock of list synchronization duties
tty: serial: kgdboc: use console_list_lock to trap exit
tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
tty: serial: kgdboc: use console_list_lock for list traversal
tty: serial: kgdboc: use srcu console list iterator
proc: consoles: use console_list_lock for list iteration
tty: tty_io: use console_list_lock for list synchronization
printk, xen: fbfront: create/use safe function for forcing preferred
netconsole: avoid CON_ENABLED misuse to track registration
usb: early: xhci-dbc: use console_is_registered()
tty: serial: xilinx_uartps: use console_is_registered()
tty: serial: samsung_tty: use console_is_registered()
tty: serial: pic32_uart: use console_is_registered()
tty: serial: earlycon: use console_is_registered()
tty: hvc: use console_is_registered()
efi: earlycon: use console_is_registered()
tty: nfcon: use console_is_registered()
serial_core: replace uart_console_enabled() with uart_console_registered()
...
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEES8DXskRxsqGE6vXTAA5oQRlWghUFAmOPOjwTHGpsYXl0b25A
a2VybmVsLm9yZwAKCRAADmhBGVaCFZ/jEADDZ1RlXCwuozDzAXFzzsR+kmKJJfXG
ff3ejXHhyJdYH8kh1IldTCR4RGblTH7dM/gO/ApJlSLbEglQm9AIjZ2lpVstqtzQ
lnZir+bA6uzOyYMRVXJ+0oDZuv3Gca3W8IhFHCqD7K9oQQbn+c/ZmEWrvNJJXN1j
Ogi1SXHUNfrFgSbgBKjc2VqewuiTc2I8tZAQyezYoGXKn6LtAgMJhQIS4eWjqjju
38aageni9doKPnAmMOq+vBcw2bWV5mYijz/pObfsaDlAgFdr9rKjNP5+F4fBply1
SDW2T1ge8jWYegq39EcDKxd/raSOET/p9vQu6rHniXKfvMQ6Ywbr7qji1a7yTZ+i
MkuOToNZy/+TTEvFQm48Fa25tcKjjl/uuk5Ugojf/hSWOsNkW1Cy4S33eUzDZiSO
wox5EFVhFpf8Q8L3dUQY0sZazCyoEftw+bq2cKGHJYfUhBD7u6yLG7EKqYiqpepX
SSPxuh3GC65xl33hYJL2V+5cgXAV23kSGCdNqDUvYZgJfjhDjQnyoSTcuBjh67kv
chmSoeUaIkS4yFqsH9kRINMSef2M5LXYbfxTnftokX0cvV6RqQndZl43X5LEBgQL
GRIxyxPkkKaqFjkqyFzBD0dkVGyjyUmkioy/1xON3pLWz3Sk77U38pEQ7NeUl2Lc
bK5uysBuvDnCpg==
=XMv7
-----END PGP SIGNATURE-----
Merge tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"The main change here is to add the new locks_inode_context helper, and
convert all of the places that dereference inode->i_flctx directly to
use that instead.
There is a new helper to indicate whether any locks are held on an
inode. This is mostly for Ceph but may be usable elsewhere too.
Andi Kleen requested that we print the PID when the LOCK_MAND warning
fires, to help track down applications trying to use it.
Finally, we added some new warnings to some of the file locking
functions that fire when the ->fl_file and filp arguments differ. This
helped us find some long-standing bugs in lockd. Patches for those are
in Chuck Lever's tree and should be in his v6.2 PR. After that patch,
people using NFSv2/v3 locking may see some warnings fire until those
go in.
Happy Holidays!"
* tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
Add process name and pid to locks warning
nfsd: use locks_inode_context helper
nfs: use locks_inode_context helper
lockd: use locks_inode_context helper
ksmbd: use locks_inode_context helper
cifs: use locks_inode_context helper
ceph: use locks_inode_context helper
filelock: add a new locks_inode_context accessor function
filelock: new helper: vfs_inode_has_locks
filelock: WARN_ON_ONCE when ->fl_file and filp don't match
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin).
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin).
- Remove FOLL_FORCE for stack setup (Kees Cook).
- Whilespace cleanups (Rolf Eike Beer, Kees Cook).
-----BEGIN PGP SIGNATURE-----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=ZDYk
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Most are small refactorings and bug fixes, but three things stand out:
switching timens (which got reverted before) looks solid now,
FOLL_FORCE has been removed (no failures seen yet across several weeks
in -next), and some whitespace cleanups (which are long overdue).
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin)
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)
- Remove FOLL_FORCE for stack setup (Kees Cook)
- Whitespace cleanups (Rolf Eike Beer, Kees Cook)"
* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: fix shift-out-of-bounds in check_special_flags
binfmt: Fix error return code in load_elf_fdpic_binary()
exec: Remove FOLL_FORCE for stack setup
binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
binfmt_elf: simplify error handling in load_elf_phdrs()
binfmt_elf: fix documented return value for load_elf_phdrs()
exec: simplify initial stack size expansion
binfmt: Fix whitespace issues
exec: Add comments on check_unsafe_exec() fs counting
ELF uapi: add spaces before '{'
selftests/timens: add a test for vfork+exit
fs/exec: switch timens when a task gets a new mm
- Reporting improvements and return path fixes (Guilherme G. Piccoli,
Wang Yufen, Kees Cook).
- Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli).
- Add Guilherme to pstore MAINTAINERS entry.
- Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd).
-----BEGIN PGP SIGNATURE-----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=EsLr
-----END PGP SIGNATURE-----
Merge tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"A small collection of bug fixes, refactorings, and general
improvements:
- Reporting improvements and return path fixes (Guilherme G. Piccoli,
Wang Yufen, Kees Cook)
- Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli)
- Add Guilherme to pstore MAINTAINERS entry
- Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd)"
* tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
pstore/ram: Fix error return code in ramoops_probe()
pstore: Alert on backend write error
MAINTAINERS: Update pstore maintainers
pstore/ram: Set freed addresses to NULL
pstore/ram: Move internal definitions out of kernel-wide include
pstore/ram: Move pmsg init earlier
pstore/ram: Consolidate kfree() paths
efi: pstore: Follow convention for the efi-pstore backend name
pstore: Inform unregistered backend names as well
pstore: Expose kmsg_bytes as a module parameter
pstore: Improve error reporting in case of backend overlap
pstore/zone: Use GFP_ATOMIC to allocate zone buffer
This branch has been applied to the I2C tree and others, and
is a dependency of a large series of changes switching many
drivers to use i2c_client_get_device_id.
This pull request contains the following branches:
doc.2022.10.20a: Documentation updates. This is the second
in a series from an ongoing review of the RCU documentation.
fixes.2022.10.21a: Miscellaneous fixes.
lazy.2022.11.30a: Introduces a default-off Kconfig option that depends
on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or
rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce
delays. These delays result in significant power savings on
nearly idle Android and ChromeOS systems. These savings range
from a few percent to more than ten percent.
This series also includes several commits that change call_rcu()
to a new call_rcu_hurry() function that avoids these delays in
a few cases, for example, where timely wakeups are required.
Several of these are outside of RCU and thus have acks and
reviews from the relevant maintainers.
srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an
srcu_read_unlock_nmisafe() for architectures that support NMIs,
but which do not provide NMI-safe this_cpu_inc(). These NMI-safe
SRCU functions are required by the upcoming lockless printk()
work by John Ogness et al.
That printk() series depends on these commits, so if you pull
the printk() series before this one, you will have already
pulled in this branch, plus two more SRCU commits:
0cd7e350ab ("rcu: Make SRCU mandatory")
51f5f78a4f ("srcu: Make Tiny synchronize_srcu() check for readers")
These two commits appear to work well, but do not have
sufficient testing exposure over a long enough time for me to
feel comfortable pushing them unless something in mainline is
definitely going to use them immediately, and currently only
the new printk() work uses them.
torture.2022.10.18c: Changes providing minor but important increases
in test coverage for the new RCU polled-grace-period APIs.
torturescript.2022.10.20a: Changes that avoid redundant kernel builds,
thus providing about a 30% speedup for the torture.sh acceptance
test.
-----BEGIN PGP SIGNATURE-----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=eMOr
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
Merge devfreq updates and cpupower utility updates for 6.2-rc1:
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
* pm-devfreq:
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
PM/devfreq: governor: Add a private governor_data for governor
* pm-tools:
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
tools/cpupower: Choose base_cpu to display default cpupower details
Merge cpufreq changes for 6.2-rc1:
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
* pm-cpufreq: (30 commits)
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
cpufreq: Init completion before kobject_init_and_add()
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: ACPI: Remove unused variables 'acpi_cpufreq_online' and 'ret'
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
...
Make ACPI power management changes, ACPI processor driver updates, ACPI
EC driver quirk and ACPI backlight driver updates for 6.2-rc1:
- Print full name paths of ACPI power resources objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
* acpi-pm:
ACPI: PM: Silence missing prototype warning
ACPI: PM: Print full name path while adding power resource
* acpi-processor:
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: processor: throttling: remove variable count
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
* acpi-ec:
ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur
* acpi-video:
ACPI: video: Prefer native over vendor
ACPI: video: Simplify __acpi_video_get_backlight_type()
ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E
ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35
ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native
ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none
ACPI: video: Add a few bugtracker links to DMI quirks
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmOXCo0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXUD/B/4m3F/FIpfQjrLR8P/87hkHtu1vLnPV
uo7SGVmq8aDiMRqWSLBWkiP6ceGememckrplG+qprx9QVZhagbtFN1/kE9jXxYSU
s+hh4ARmLfpdZmcNCFzFi2S68G4fsQ3rTI8g/itbpQYCGyHt90yA5+PqT+QQZOvo
J4l4uim4nVyBNEW136Vf13K0iFCmeJr4zr1eSqqHhZVSbK2cQSSN93HlhmZ+ccjT
c1vZdNL1nd9mCQkNFHC+JPehfcgaI0r6hx8RYECvOCy8EbK1ZXdseWlM/z7IoxZm
DiT2KhTao9xa9qcnRjI6oqTwO0omlqND2YDBj+SRwfFAs3HogeOaQjRT
=w/j3
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.2-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-6.2-20221212
this is a pull request of 39 patches for net-next/master.
The first 2 patches are by me fix a warning and coding style in the
kvaser_usb driver.
Vivek Yadav's patch sorts the includes of the m_can driver.
Biju Das contributes 5 patches for the rcar_canfd driver improve the
support for different IP core variants.
Jean Delvare's patch for the ctucanfd drops the dependency on
COMPILE_TEST.
Vincent Mailhol's patch sorts the includes of the etas_es58x driver.
Haibo Chen's contributes 2 patches that add i.MX93 support to the
flexcan driver.
Lad Prabhakar's patch updates the dt-bindings documentation of the
rcar_canfd driver.
Minghao Chi's patch converts the c_can platform driver to
devm_platform_get_and_ioremap_resource().
In the next 7 patches Vincent Mailhol adds devlink support to the
etas_es58x driver to report firmware, bootloader and hardware version.
Xu Panda's patch converts a strncpy() -> strscpy() in the ucan driver.
Ye Bin's patch removes a useless parameter from the AF_CAN protocol.
The next 2 patches by Vincent Mailhol and remove unneeded or unused
pointers to struct usb_interface in device's priv struct in the ucan
and gs_usb driver.
Vivek Yadav's patch cleans up the usage of the RAM initialization in
the m_can driver.
A patch by me add support for SO_MARK to the AF_CAN protocol.
Geert Uytterhoeven's patch fixes the number of CAN channels in the
rcan_canfd bindings documentation.
In the last 11 patches Markus Schneider-Pargmann optimizes the
register access in the t_can driver and cleans up the tcan glue
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in [1], abbreviating the bootloader to "bl" might not be
well understood. Instead, a bootloader technically being a firmware,
name it "fw.bootloader".
Add a new macro to devlink.h to formalize this new info attribute name
and update the documentation.
[1] https://lore.kernel.org/netdev/20221128142723.2f826d20@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
usb_cache_string() can also be useful for the drivers so export it.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20221130174658.29282-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There are two nat functions are nearly the same in both OVS and
TC code, (ovs_)ct_nat_execute() and ovs_ct_nat/tcf_ct_act_nat().
This patch creates nf_nat_ovs.c under netfilter and moves them
there then exports nf_ct_nat() so that it can be shared by both
OVS and TC, and keeps the nat (type) check and nat flag update
in OVS and TC's own place, as these parts are different between
OVS and TC.
Note that in OVS nat function it was using skb->protocol to get
the proto as it already skips vlans in key_extract(), while it
doesn't in TC, and TC has to call skb_protocol() to get proto.
So in nf_ct_nat_execute(), we keep using skb_protocol() which
works for both OVS and TC contrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, it's possible to convert USO vnet packets from/to skb.
Added support for GSO_UDP_L4 offload.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added new GSO type for USO: VIRTIO_NET_HDR_GSO_UDP_L4.
Feature VIRTIO_NET_F_HOST_USO allows to enable NETIF_F_GSO_UDP_L4.
Separated VIRTIO_NET_F_GUEST_USO4 & VIRTIO_NET_F_GUEST_USO6 features
required for Windows guests.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added 2 additional offlloads for USO(IPv4 & IPv6).
Separate offloads are required for Windows VM guests,
g.e. Windows may set USO rx only for IPv4.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the typo of 'suport' in kcov.h
Link: https://lkml.kernel.org/r/tencent_922CA94B789587D79FD154445D035AA19E07@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit ee62c6b2dc ("eventfd: change int to __u64 in eventfd_signal()")
forgot to change int to __u64 in the CONFIG_EVENTFD=n stub function.
Link: https://lkml.kernel.org/r/20221124140154.104680-1-zhangqilong3@huawei.com
Fixes: ee62c6b2dc ("eventfd: change int to __u64 in eventfd_signal()")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sha Zhengju <handai.szj@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The nodes= arg instructs the kernel to only scan the given nodes for
proactive reclaim. For example use cases, consider a 2 tier memory
system:
nodes 0,1 -> top tier
nodes 2,3 -> second tier
$ echo "1m nodes=0" > memory.reclaim
This instructs the kernel to attempt to reclaim 1m memory from node 0.
Since node 0 is a top tier node, demotion will be attempted first. This
is useful to direct proactive reclaim to specific nodes that are under
pressure.
$ echo "1m nodes=2,3" > memory.reclaim
This instructs the kernel to attempt to reclaim 1m memory in the second
tier, since this tier of memory has no demotion targets the memory will be
reclaimed.
$ echo "1m nodes=0,1" > memory.reclaim
Instructs the kernel to reclaim memory from the top tier nodes, which can
be desirable according to the userspace policy if there is pressure on the
top tiers. Since these nodes have demotion targets, the kernel will
attempt demotion first.
Since commit 3f1509c57b ("Revert "mm/vmscan: never demote for memcg
reclaim""), the proactive reclaim interface memory.reclaim does both
reclaim and demotion. Reclaim and demotion incur different latency costs
to the jobs in the cgroup. Demoted memory would still be addressable by
the userspace at a higher latency, but reclaimed memory would need to
incur a pagefault.
The 'nodes' arg is useful to allow the userspace to control demotion and
reclaim independently according to its policy: if the memory.reclaim is
called on a node with demotion targets, it will attempt demotion first; if
it is called on a node without demotion targets, it will only attempt
reclaim.
Link: https://lkml.kernel.org/r/20221202223533.1785418-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: fix protection of reclaim target memcg", v3.
This series fixes a bug in calculating the protection of the reclaim
target memcg where we end up using stale effective protection values from
the last reclaim operation, instead of completely ignoring the protection
of the reclaim target as intended. More detailed explanation and examples
in patch 1, which includes the fix. Patches 2 & 3 introduce a selftest
case that catches the bug.
This patch (of 3):
When we are doing memcg reclaim, the intended behavior is that we
ignore any protection (memory.min, memory.low) of the target memcg (but
not its children). Ever since the patch pointed to by the "Fixes" tag,
we actually read a stale value for the target memcg protection when
deciding whether to skip the memcg or not because it is protected. If
the stale value happens to be high enough, we don't reclaim from the
target memcg.
Essentially, in some cases we may falsely skip reclaiming from the
target memcg of reclaim because we read a stale protection value from
last time we reclaimed from it.
During reclaim, mem_cgroup_calculate_protection() is used to determine the
effective protection (emin and elow) values of a memcg. The protection of
the reclaim target is ignored, but we cannot set their effective
protection to 0 due to a limitation of the current implementation (see
comment in mem_cgroup_protection()). Instead, we leave their effective
protection values unchaged, and later ignore it in
mem_cgroup_protection().
However, mem_cgroup_protection() is called later in
shrink_lruvec()->get_scan_count(), which is after the
mem_cgroup_below_{min/low}() checks in shrink_node_memcgs(). As a result,
the stale effective protection values of the target memcg may lead us to
skip reclaiming from the target memcg entirely, before calling
shrink_lruvec(). This can be even worse with recursive protection, where
the stale target memcg protection can be higher than its standalone
protection. See two examples below (a similar version of example (a) is
added to test_memcontrol in a later patch).
(a) A simple example with proactive reclaim is as follows. Consider the
following hierarchy:
ROOT
|
A
|
B (memory.min = 10M)
Consider the following scenario:
- B has memory.current = 10M.
- The system undergoes global reclaim (or memcg reclaim in A).
- In shrink_node_memcgs():
- mem_cgroup_calculate_protection() calculates the effective min (emin)
of B as 10M.
- mem_cgroup_below_min() returns true for B, we do not reclaim from B.
- Now if we want to reclaim 5M from B using proactive reclaim
(memory.reclaim), we should be able to, as the protection of the
target memcg should be ignored.
- In shrink_node_memcgs():
- mem_cgroup_calculate_protection() immediately returns for B without
doing anything, as B is the target memcg, relying on
mem_cgroup_protection() to ignore B's stale effective min (still 10M).
- mem_cgroup_below_min() reads the stale effective min for B and we
skip it instead of ignoring its protection as intended, as we never
reach mem_cgroup_protection().
(b) An more complex example with recursive protection is as follows.
Consider the following hierarchy with memory_recursiveprot:
ROOT
|
A (memory.min = 50M)
|
B (memory.min = 10M, memory.high = 40M)
Consider the following scenario:
- B has memory.current = 35M.
- The system undergoes global reclaim (target memcg is NULL).
- B will have an effective min of 50M (all of A's unclaimed protection).
- B will not be reclaimed from.
- Now allocate 10M more memory in B, pushing it above it's high limit.
- The system undergoes memcg reclaim from B (target memcg is B).
- Like example (a), we do nothing in mem_cgroup_calculate_protection(),
then call mem_cgroup_below_min(), which will read the stale effective
min for B (50M) and skip it. In this case, it's even worse because we
are not just considering B's standalone protection (10M), but we are
reading a much higher stale protection (50M) which will cause us to not
reclaim from B at all.
This is an artifact of commit 45c7f7e1ef ("mm, memcg: decouple
e{low,min} state mutations from protection checks") which made
mem_cgroup_calculate_protection() only change the state without returning
any value. Before that commit, we used to return MEMCG_PROT_NONE for the
target memcg, which would cause us to skip the
mem_cgroup_below_{min/low}() checks. After that commit we do not return
anything and we end up checking the min & low effective protections for
the target memcg, which are stale.
Update mem_cgroup_supports_protection() to also check if we are reclaiming
from the target, and rename it to mem_cgroup_unprotected() (now returns
true if we should not protect the memcg, much simpler logic).
Link: https://lkml.kernel.org/r/20221202031512.1365483-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20221202031512.1365483-2-yosryahmed@google.com
Fixes: 45c7f7e1ef ("mm, memcg: decouple e{low,min} state mutations from protection checks")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Chris Down <chris@chrisdown.name>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement unshare in fsdax mode: copy data from srcmap to iomap.
Link: https://lkml.kernel.org/r/1669908753-169-1-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "fsdax,xfs: fix warning messages", v2.
Many testcases failed in dax+reflink mode with warning message in dmesg.
Such as generic/051,075,127. The warning message is like this:
[ 775.509337] ------------[ cut here ]------------
[ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69
[ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse
[ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d
[ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014
[ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69
[ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48
[ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082
[ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042
[ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff
[ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0
[ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320
[ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001
[ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0
[ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 775.531002] Call Trace:
[ 775.531230] <TASK>
[ 775.531444] dax_fault_iter+0x267/0x6c0
[ 775.531719] dax_iomap_pte_fault+0x198/0x3d0
[ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7]
[ 775.532603] __do_fault+0x30/0x1e0
[ 775.532903] do_fault+0x314/0x6c0
[ 775.533166] __handle_mm_fault+0x646/0x1250
[ 775.533480] handle_mm_fault+0xc1/0x230
[ 775.533810] do_user_addr_fault+0x1ac/0x610
[ 775.534110] exc_page_fault+0x63/0x140
[ 775.534389] asm_exc_page_fault+0x22/0x30
[ 775.534678] RIP: 0033:0x7f39fc55820a
[ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00
[ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202
[ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1
[ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040
[ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000
[ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001
[ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003
[ 775.538086] </TASK>
[ 775.538333] ---[ end trace 0000000000000000 ]---
This also affects dax+noreflink mode if we run the test after a
dax+reflink test. So, the most urgent thing is solving the warning
messages.
With these fixes, most warning messages in dax_associate_entry() are gone.
But honestly, generic/388 will randomly failed with the warning. The
case shutdown the xfs when fsstress is running, and do it for many times.
I think the reason is that dax pages in use are not able to be invalidated
in time when fs is shutdown. The next time dax page to be associated, it
still remains the mapping value set last time. I'll keep on solving it.
The warning message in dax_writeback_one() can also be fixed because of
the dax unshare.
This patch (of 8):
fsdax page is used not only when CoW, but also mapread. To make the it
easily understood, use 'share' to indicate that the dax page is shared by
more than one extent. And add helper functions to use it.
Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED.
[ruansy.fnst@fujitsu.com: rename several functions]
Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com
[ruansy.fnst@fujitsu.com: v2.2]
Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "convert core hugetlb functions to folios", v5.
============== OVERVIEW ===========================
Now that many hugetlb helper functions that deal with hugetlb specific
flags[1] and hugetlb cgroups[2] are converted to folios, higher level
allocation, prep, and freeing functions within hugetlb can also be
converted to operate in folios.
Patch 1 of this series implements the wrapper functions around setting the
compound destructor and compound order for a folio. Besides the user
added in patch 1, patch 2 and patch 9 also use these helper functions.
Patches 2-10 convert the higher level hugetlb functions to folios.
============== TESTING ===========================
LTP:
Ran 10 back to back rounds of the LTP hugetlb test suite.
Gigantic Huge Pages:
Test allocation and freeing via hugeadm commands:
hugeadm --pool-pages-min 1GB:10
hugeadm --pool-pages-min 1GB:0
Demote:
Demote 1 1GB hugepages to 512 2MB hugepages
echo 1 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
echo 1 > /sys/kernel/mm/hugepages/hugepages-1048576kB/demote
cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# 512
cat /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
# 0
[1] https://lore.kernel.org/lkml/20220922154207.1575343-1-sidhartha.kumar@oracle.com/
[2] https://lore.kernel.org/linux-mm/20221101223059.460937-1-sidhartha.kumar@oracle.com/
This patch (of 10):
Add folio equivalents for set_compound_order() and
set_compound_page_dtor().
Also remove extra new-lines introduced by mm/hugetlb: convert
move_hugetlb_state() to folios and mm/hugetlb_cgroup: convert
hugetlb_cgroup_uncharge_page() to folios.
[sidhartha.kumar@oracle.com: clarify folio_set_compound_order() zero support]
Link: https://lkml.kernel.org/r/20221207223731.32784-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221129225039.82257-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221129225039.82257-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are no longer any callers of lru_cache_add(), so remove it. This
saves 79 bytes of kernel text. Also cleanup some comments such that
they reference the new folio_add_lru() instead.
Link: https://lkml.kernel.org/r/20221101175326.13265-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Removing the lru_cache_add() wrapper".
This patchset replaces all calls of lru_cache_add() with the folio
equivalent: folio_add_lru(). This is allows us to get rid of the wrapper
The series passes xfstests and the userfaultfd selftests.
This patch (of 5):
Eliminates 7 calls to compound_head().
Link: https://lkml.kernel.org/r/20221101175326.13265-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221101175326.13265-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add sparse memory vmemmap support for LoongArch. SPARSEMEM_VMEMMAP uses a
virtually mapped memmap to optimise pfn_to_page and page_to_pfn
operations. This is the most efficient option when sufficient kernel
resources are available.
Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Return value from ptep_get_and_clear_full() directly instead of taking
this in another redundant variable.
Link: https://lkml.kernel.org/r/202211282107437343474@zte.com.cn
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"mm_khugepaged_collapse_file" for capturing is_shmem.
Currently, is_shmem is not being captured. Capturing is_shmem is useful
as it can indicate if tmpfs is being used as a backing store instead of
persistent storage. Add the tracepoint in collapse_file() named
"mm_khugepaged_collapse_file" for capturing is_shmem.
[gautammenghani201@gmail.com: swap is_shmem and addr to save space, per Steven Rostedt]
Link: https://lkml.kernel.org/r/20221202201807.182829-1-gautammenghani201@gmail.com
Link: https://lkml.kernel.org/r/20221026052218.148234-1-gautammenghani201@gmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fortunately, the last user (KSM) is gone, so let's just remove this rather
special code from generic GUP handling -- especially because KSM never
required the PMD handling as KSM only deals with individual base pages.
[akpm@linux-foundation.org: fix merge snafu]Link: https://lkml.kernel.org/r/20221021101141.84170-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.
To be used in KSM code to stop using follow_page() next.
Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All users -- GUP and KSM -- are gone, let's just remove it.
Link: https://lkml.kernel.org/r/20221021101141.84170-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As Peter points out, the caller passes a single VMA and can just do that
check itself.
And in fact, no existing users rely on test_walk() getting called. So
let's just remove it and make the implementation slightly more efficient.
Link: https://lkml.kernel.org/r/20221021101141.84170-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Because not all I3C drivers have the hot-join feature ready, and
especially not all I3C devices support hot-join feature, exporting
SETDASA method could be useful. With this function, the I3C controller
could perform a DAA to I3C devices when users decide to turn these I3C
devices off and on again during run-time.
Tested: This change has been tested with turnning off an I3C device and
turning on it again during run-time. The device driver calls SETDASA
method to perform DAA to the device. And communication between I3C
controller and device is set up again correctly.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20221207205059.3848851-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Present definition for module_i3c_i2c_driver uses only the
1st argument i.e., struct i3c_driver.
Irrespective of CONFIG_I3C being enabled/disabled,
struct i2c_driver is never passed to module_driver()
Passing struct i2c_driver as the 4th argument works.
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20221205105413.937704-1-naveenkrishna.chatradhi@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
post-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5Ur2AAKCRDdBJ7gKXxA
jsGmAQDWSq6z9fVgk30XpMr/X7t5c6NTPw5GocVpdwG8iqch3gEAjEs5/Kcd/mx4
d1dLaJFu1u3syessp8nJrNr1HANIog8=
=L8zu
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes.
Six for MM, three for other areas. Four of these patches address
post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
memcg: fix possible use-after-free in memcg_write_event_control()
MAINTAINERS: update Muchun Song's email
mm/gup: fix gup_pud_range() for dax
mmap: fix do_brk_flags() modifying obviously incorrect VMAs
mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
tmpfs: fix data loss from failed fallocate
kselftests: cgroup: update kmem test precision tolerance
mm: do not BUG_ON missing brk mapping, because userspace can unmap it
mailmap: update Matti Vaittinen's email address
Allow the kthreads for stats to be configured for
specific cpulist (isolation) and niceness (scheduling
priority).
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Cc: "dust.li" <dust.li@linux.alibaba.com>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Estimating all entries in single list in timer context
by single CPU causes large latency with multiple IPVS rules
as reported in [1], [2], [3].
Spread the estimator structures in multiple chains and
use kthread(s) for the estimation. The chains are processed
in multiple (50) timer ticks to ensure the 2-second interval
between estimations with some accuracy. Every chain is
processed under RCU lock.
Every kthread works over its own data structure and all
such contexts are attached to array. The contexts can be
preserved while the kthread tasks are stopped or restarted.
When estimators are removed, unused kthread contexts are
released and the slots in array are left empty.
First kthread determines parameters to use, eg. maximum
number of estimators to process per kthread based on
chain's length (chain_max), allowing sub-100us cond_resched
rate and estimation taking up to 1/8 of the CPU capacity
to avoid any problems if chain_max is not correctly
calculated.
chain_max is calculated taking into account factors
such as CPU speed and memory/cache speed where the
cache_factor (4) is selected from real tests with
current generation of CPU/NUMA configurations to
correct the difference in CPU usage between
cached (during calc phase) and non-cached (working) state
of the estimated per-cpu data.
First kthread also plays the role of distributor of
added estimators to all kthreads, keeping low the
time to add estimators. The optimization is based on
the fact that newly added estimator should be estimated
after 2 seconds, so we have the time to offload the
adding to chain from controlling process to kthread 0.
The allocated kthread context may grow from 1 to 50
allocated structures for timer ticks which saves memory for
setups with small number of estimators.
We also add delayed work est_reload_work that will
make sure the kthread tasks are properly started/stopped.
ip_vs_start_estimator() is changed to report errors
which allows to safely store the estimators in
allocated structures.
Many thanks to Jiri Wiesner for his valuable comments
and for spending a lot of time reviewing and testing
the changes on different platforms with 48-256 CPUs and
1-8 NUMA nodes under different cpufreq governors.
[1] Report from Yunhong Jiang:
https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/
[2]
https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2
[3] Report from Dust:
https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Cc: "dust.li" <dust.li@linux.alibaba.com>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Tested-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
