There are a number of places in the kernel that are accessing the
inode->i_flctx field without smp_load_acquire. This is required to
ensure that the caller doesn't see a partially-initialized structure.
Add a new accessor function for it to make this clear and convert all of
the relevant accesses in locks.c to use it. Also, convert
locks_free_lock_context to use the helper as well instead of just doing
a "bare" assignment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Ceph has a need to know whether a particular inode has any locks set on
it. It's currently tracking that by a num_locks field in its
filp->private_data, but that's problematic as it tries to decrement this
field when releasing locks and that can race with the file being torn
down.
Add a new vfs_inode_has_locks helper that just returns whether any locks
are currently held on the inode.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
MLX5_UMR_KLM_ALIGNMENT is in units of number of entries, while
MLX5_UMR_MTT_ALIGNMENT (generalized and renamed to
MLX5_UMR_FLEX_ALIGNMENT) is in byte units. This is misleading and
confusing.
Replace this KLM definition with one based on the generic definition.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Per the device spec, MLX5_UMR_MTT_ALIGNMENT is good not only for UMR MTT
entries, but for all other entries as well, like KLMs and KSMs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Defines MLX5_UMR_MTT_MASK and MLX5_UMR_MTT_MIN_CHUNK_SIZE are not in
use. Remove them.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Per the device spec, MTTs/KLMs list in a UMR WQE must be aligned to 64B.
Per our SW design, the MTT/KLMs list would need alignment only if it's
too small, for example on PPC when PAGE_SIZE is 64KB, and only 4 pages
are needed to cover a MPWQE of size 256KB.
Padding, if needed, is taken into account when calculating the UMR WQE
fields (ds_cnt and xlt_octowords), however no entries are provided,
instead garbage is passed.
No real harm though, as these parts act as gaps between the RX MPWQEs
and not used by any of them. Hence, in practice, device does not try to
write any incoming packet to them. Still, prefer providing clean padding
marking the end of the list, and do not map garbage into the RQ memory
region.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove mlx5_priv.ctx_list and ctx_lock which are no longer used after
commit 601c10c89c ("net/mlx5: Delete custom device management logic").
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Steffen Klassert says:
====================
ipsec-next 2022-11-26
1) Remove redundant variable in esp6.
From Colin Ian King.
2) Update x->lastused for every packet. It was used only for
outgoing mobile IPv6 packets, but showed to be usefull
to check if the a SA is still in use in general.
From Antony Antony.
3) Remove unused variable in xfrm_byidx_resize.
From Leon Romanovsky.
4) Finalize extack support for xfrm.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add extack to xfrm_set_spdinfo
xfrm: add extack to xfrm_alloc_userspi
xfrm: add extack to xfrm_do_migrate
xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
xfrm: add extack to xfrm_del_sa
xfrm: add extack to xfrm_add_sa_expire
xfrm: a few coding style clean ups
xfrm: Remove not-used total variable
xfrm: update x->lastused for every packet
esp6: remove redundant variable err
====================
Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This contains a bunch of cleanups across the board as well as support
for the NVDEC hardware found on the Tegra234 SoC.
-----BEGIN PGP SIGNATURE-----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=7VMV
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-6.2-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v6.2-rc1
This contains a bunch of cleanups across the board as well as support
for the NVDEC hardware found on the Tegra234 SoC.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125155219.3352952-1-thierry.reding@gmail.com
subsystem, which is part of the DRM subsystem.
The patches:
- Add a new directory at drivers/accel.
- Add a new major (261) for compute accelerators.
- Add a new DRM minor type for compute accelerators.
- Integrate the accel core code with DRM core code.
- Add documentation for the accel subsystem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN8r2UACgkQZR1NuKta
54CJzwf/SkjfYoo8bLi1eedSSLZQZiNFtkqUqH0jho2UT5MG3yoPasXe/hovnf6+
SOE1fMO/VpfQPJ5xqjuHwUaGxXIFFi1vkMllhZrODljTP0dNjhgWc7WTTsKTj586
pMpYWA8bDfoF0SSGfEYbDi7qqiZFFVP6UeM4jvQgPhURNbLhF2dx69D3K1ZLvJJE
673ZzJkZcnZRdTjypCE2gCOcXpXclbNenFHqMkuaX6JfGu+8YPR0GGVWiBfo+FvO
gNnxXDhBmYdn+Khzzxr+ssewOklHM+Moe2Iv20jZQgVsHot3c+bJx+7BPBHpg5Ib
4uqIrwMZENIQoH+FgYxSRMfEn0JI/w==
=RCyB
-----END PGP SIGNATURE-----
Merge tag 'drm-accel-2022-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/accel into drm-next
This tag contains the patches that add the new compute acceleration
subsystem, which is part of the DRM subsystem.
The patches:
- Add a new directory at drivers/accel.
- Add a new major (261) for compute accelerators.
- Add a new DRM minor type for compute accelerators.
- Integrate the accel core code with DRM core code.
- Add documentation for the accel subsystem.
Signed-off-by: Dave Airlie <airlied@redhat.com>
some acks from the list (some are in the patch series):
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Sonal Santan <sonal.santan@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122112222.GA352082@ogabbay-vm-u20.habana-labs.com
Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build
failures. This causes trouble for deep embedded systems. But given
that there are more than 25 instances of "select SRCU" in the kernel,
it is hard to believe that there are many kernels running in production
without SRCU. This commit therefore makes SRCU mandatory. The SRCU
Kconfig option remains for backwards compatibility, and will be removed
when it is no longer used.
[ paulmck: Update per kernel test robot feedback. ]
Reported-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Implement timer-based RCU callback batching (also known as lazy
callbacks). With this we save about 5-10% of power consumed due
to RCU requests that happen when system is lightly loaded or idle.
By default, all async callbacks (queued via call_rcu) are marked
lazy. An alternate API call_rcu_hurry() is provided for the few users,
for example synchronize_rcu(), that need the old behavior.
The batch is flushed whenever a certain amount of time has passed, or
the batch on a particular CPU grows too big. Also memory pressure will
flush it in a future patch.
To handle several corner cases automagically (such as rcu_barrier() and
hotplug), we re-use bypass lists which were originally introduced to
address lock contention, to handle lazy CBs as well. The bypass list
length has the lazy CB length included in it. A separate lazy CB length
counter is also introduced to keep track of the number of lazy CBs.
[ paulmck: Fix formatting of inline call_rcu_lazy() definition. ]
[ paulmck: Apply Zqiang feedback. ]
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Suggested-by: Paul McKenney <paulmck@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The span iterator travels over the indexes of the interval_tree, not the
nodes, and classifies spans of indexes as either 'used' or 'hole'.
'used' spans are fully covered by nodes in the tree and 'hole' spans have
no node intersecting the span.
This is done greedily such that spans are maximally sized and every
iteration step switches between used/hole.
As an example a trivial allocator can be written as:
for (interval_tree_span_iter_first(&span, itree, 0, ULONG_MAX);
!interval_tree_span_iter_done(&span);
interval_tree_span_iter_next(&span))
if (span.is_hole &&
span.last_hole - span.start_hole >= allocation_size - 1)
return span.start_hole;
With all the tricky boundary conditions handled by the library code.
The following iommufd patches have several algorithms for its overlapping
node interval trees that are significantly simplified with this kind of
iteration primitive. As it seems generally useful, put it into lib/.
Link: https://lore.kernel.org/r/3-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These complement the group interfaces used by VFIO and are for use by
iommufd. The main difference is that multiple devices in the same group
can all share the ownership by passing the same ownership pointer.
Move the common code into shared functions.
Link: https://lore.kernel.org/r/2-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This queries if a domain linked to a device should expect to support
enforce_cache_coherency() so iommufd can negotiate the rules for when a
domain should be shared or not.
For iommufd a device that declares IOMMU_CAP_ENFORCE_CACHE_COHERENCY will
not be attached to a domain that does not support it.
Link: https://lore.kernel.org/r/1-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
New boards:
- Model A and blade baseboards for the SOQuartz (rk3568) SoM,
- Anberic RG351M, RG353V, RG353VS; Odroid Go Super, Advance gaming devices
- Odroid M1
- Theobroma px30 SoM with baseboard
- Rockchip's own rk3566 demo board
Some core support for per SoC specifics:
- crypto support for rk3399 and rk3328
- second I2S controller for rk3568
- Cache properties for follow the binding for rk3308 and rk3328
Bigger device support updates for:
- SOQuartz: PCIe2, video output, gpu, HDMI sound
- Rock 3A: eth regulator, eth clock input, Wifi+Bt, I2S, PCIe3
As well as some minor extensions for Rock960 (hdmi supplies),
rk3566-roc-pc (PCIe2), Rock 4C+ (thermal support), Pinephone Pro (Wifi+Bt)
* tag 'v6.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (51 commits)
arm64: dts: rockchip: update cache properties for rk3308 and rk3328
arm64: dts: rockchip: Add SOQuartz Model A baseboard
dt-bindings: arm: rockchip: Add SOQuartz Model A
arm64: dts: rockchip: Add SOQuartz blade board
dt-bindings: arm: rockchip: Add SOQuartz Blade
arm64: dts: rockchip: Add Anbernic RG351M
arm64: dts: rockchip: Add Odroid Go Super
arm64: dts: rockchip: Add Odroid Go Advance Black Edition
dt-bindings: arm: rockchip: Add more RK3326 devices
arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
arm64: dts: rockchip: Add support of regulator for ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add support of external clock to ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add HDMI supplies on Rock960
arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board
dt-bindings: rockchip: Add Rockchip rk3566 box demo board
arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO
arm64: dts: rockchip: Enable HDMI sound on SOQuartz
arm64: dts: rockchip: Enable video output and HDMI on SOQuartz
arm64: dts: rockchip: Enable GPU on SOQuartz CM4
arm64: dts: rockchip: enable pcie2 on rk3566-roc-pc
...
Link: https://lore.kernel.org/r/4716610.aeNJFYEL58@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
This reverts commit c0071be0e1.
The cited commit removed the validity checks which initialized the
window_sz and never removed the use of the now uninitialized variable,
so now we are left with wrong value in the window size and the following
clang warning: [-Wuninitialized]
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45:
warning: variable 'window_sz' is uninitialized when used here
MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz);
Revet at this time to address the clang issue due to lack of time to
test the proper solution.
Fixes: c0071be0e1 ("net/mlx5e: MACsec, remove replay window size limitation in offload path")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221129093006.378840-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let's introduce the basics for advertizing discovered PANs and
coordinators, which is:
- A new "scan" netlink message group.
- A couple of netlink command/attribute.
- The main netlink helper to send a netlink message with all the
necessary information to forward the main information to the user.
Two netlink attributes are proactively added to support future UWB
complex channels, but are not actually used yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)
-----BEGIN PGP SIGNATURE-----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=dUtt
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme into for-6.2/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.2
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"
* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
nvmet: expose firmware revision to configfs
nvmet: expose IEEE OUI to configfs
nvme: rename the queue quiescing helpers
nvmet: fix a memory leak in nvmet_auth_set_key
nvme: return err on nvme_init_non_mdts_limits fail
nvme: avoid fallback to sequential scan due to transient issues
nvme-rdma: stop auth work after tearing down queues in error recovery
nvme-tcp: stop auth work after tearing down queues in error recovery
nvme-auth: have dhchap_auth_work wait for queues auth to complete
nvme-auth: remove redundant auth_work flush
nvme-auth: convert dhchap_auth_list to an array
nvme-auth: check chap ctrl_key once constructed
nvme-auth: no need to reset chap contexts on re-authentication
nvme-auth: remove redundant deallocations
nvme-auth: clear sensitive info right after authentication completes
nvme-auth: guarantee dhchap buffers under memory pressure
nvme-auth: don't keep long lived 4k dhchap buffer
nvme-auth: remove redundant if statement
nvme-auth: don't override ctrl keys before validation
nvme-auth: don't ignore key generation failures when initializing ctrl keys
...
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN+QSEACgkQZR1NuKta
54Ducgf+PsD85BWXlqWkTa2S8tn7h+OCETapAEY+JMRu1UB15ccLGZlH1O/L2try
NBjUEcbzvS1KPYmNMubKXOIlacTJrukaoqvtMfLSe1+Y/zvfTpF1+LGLp39wSRo8
R36A1VEQxalSZoFhQMERVoWBfjiVaW3ENqe3H9Vb/ab9QdMUzP4P4uaLsECtsLSy
ft31ZcN+jPjhjSYC7xZjzd3KXvVqlQ/5TsXdX6nsxphrOUiKxT55Gsypkx5O4vt1
Q4aw+v3Z0NgknDF90n7O90y/wgE3OqKHiKl+9l7lS/WkLhhaWknJ9zJlfLI8uiEH
UjMku/EpH6SSN5hrCDQvtFaXJSgiWQ==
=cHXD
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v6.2:
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
* tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (63 commits)
habanalabs: fix VA range calculation
habanalabs: fail driver load if EEPROM errors detected
habanalabs: make print of engines idle mask more readable
habanalabs: clear non-released encapsulated signals
habanalabs: don't put context in hl_encaps_handle_do_release_sob()
habanalabs: print context refcount value if hard reset fails
habanalabs: add RMWREG32_SHIFTED to set a val within a mask
habanalabs: fix rc when new CPUCP opcodes are not supported
habanalabs/gaudi2: added memset for the cq_size register
habanalabs: added return value check for hl_fw_dynamic_send_clear_cmd()
habanalabs: increase the size of busy engines mask
habanalabs/gaudi2: change memory scrub mechanism
habanalabs: extend process wait timeout in device fine
habanalabs: check schedule_hard_reset correctly
habanalabs: reset device if still in use when released
habanalabs/gaudi2: return to reset upon SM SEI BRESP error
habanalabs/gaudi2: don't enable entries in the MSIX_GW table
habanalabs/gaudi2: remove redundant firmware version check
habanalabs/gaudi: fix print for firmware-alive event
habanalabs: fix print for out-of-sync and pkt-failure events
...
Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export
of_get_mac_addr_nvmem()
and rename it to
of_get_mac_address_nvmem()
in order to fit the convention followed by the existing exported helpers
of the same kind.
This way, OF compatible drivers using eg. fwnode_get_mac_address() can
do a direct call to it instead of calling of_get_mac_address() just for
the nvmem step, avoiding to repeat an expensive DT lookup which has
already been done once.
Eventually, fwnode_get_mac_address() should probably be updated to
perform the nvmem lookup directly, but as of today, nvmem cells seem not
to be supported by ACPI yet which would defeat this kind of extension.
Suggested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As with PG_arch_2, this flag is only allowed on 64-bit architectures due
to the shortage of bits available. It will be used by the arm64 MTE code
in subsequent patches.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: added flag preserving in __split_huge_page_tail()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-5-pcc@google.com
Commit 4beba9486a ("mm: Add PG_arch_2 page flag") introduced a new
page flag for all 64-bit architectures. However, even if an architecture
is 64-bit, it may still have limited spare bits in the 'flags' member of
'struct page'. This may happen if an architecture enables SPARSEMEM
without SPARSEMEM_VMEMMAP as is the case with the newly added loongarch.
This architecture port needs 19 more bits for the sparsemem section
information and, while it is currently fine with PG_arch_2, adding any
more PG_arch_* flags will trigger build-time warnings.
Add a new CONFIG_ARCH_USES_PG_ARCH_X option which can be selected by
architectures that need more PG_arch_* flags beyond PG_arch_1. Select it
on arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix build with CONFIG_ARM64_MTE disabled]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-2-pcc@google.com
Some of the existing users, and definitely will be new ones, want to
count existing nodes in the list. Provide a generic API for that by
moving code from i915 to list.h.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221123144901.40493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some port drivers may want to set a Type-C partner as a parent for a
USB Power Delivery object, but the Type-C partner struct isn't exposed
outside of the Type-C class driver. Add a wrapper to
usb_power_delivery_register() which sets the provided Type-C partner
as a parent to the USB PD object. This helps to avoid exposing the
Type-C partner's device struct unnecessarily.
Cc: Benson Leung <bleung@chromium.org>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20221122220538.2991775-2-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB drivers do not need to call usb_set_intfdata(intf, NULL) in their
usb_driver::disconnect callback because the core already does it in [1].
However, this fact is widely unknown, c.f.:
$ git grep "usb_set_intfdata(.*NULL)" | wc -l
215
Especially, setting the interface to NULL before all action completed
can result in a NULL pointer dereference. Not calling
usb_set_intfdata() at all in disconnect() is the safest method.
Add documentation to usb_set_intfdata() to clarify this point.
Also remove the call in usb-skeletion's disconnect() not to confuse
the new comers.
[1] function usb_unbind_interface() from drivers/usb/core/driver.c
Link: https://elixir.bootlin.com/linux/v6.0/source/drivers/usb/core/driver.c#L497
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221128102954.3615579-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY4AC5QAKCRDbK58LschI
g1e0AQCfAqduTy7mYd02jDNCV0wLphNp9FbPiP9OrQT37ABpKAEA1ulj1X59bX3d
HnZdDKuatcPZT9MV5hDLM7MFJ9GjOA4=
=fNmM
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent multithreaded write data corruption has been uncovered in
the iomap write code. The core of the problem is partial folio
writes can be flushed to disk while a new racing write can map it
and fill the rest of the page:
writeback new write
allocate blocks
blocks are unwritten
submit IO
.....
map blocks
iomap indicates UNWRITTEN range
loop {
lock folio
copyin data
.....
IO completes
runs unwritten extent conv
blocks are marked written
<iomap now stale>
get next folio
}
Now add memory pressure such that memory reclaim evicts the
partially written folio that has already been written to disk.
When the new write finally gets to the last partial page of the new
write, it does not find it in cache, so it instantiates a new page,
sees the iomap is unwritten, and zeros the part of the page that
it does not have data from. This overwrites the data on disk that
was originally written.
The full description of the corruption mechanism can be found here:
https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/
To solve this problem, we need to check whether the iomap is still
valid after we lock each folio during the write. We have to do it
after we lock the page so that we don't end up with state changes
occurring while we wait for the folio to be locked.
Hence we need a mechanism to be able to check that the cached iomap
is still valid (similar to what we already do in buffered
writeback), and we need a way for ->begin_write to back out and
tell the high level iomap iterator that we need to remap the
remaining write range.
The iomap needs to grow some storage for the validity cookie that
the filesystem provides to travel with the iomap. XFS, in
particular, also needs to know some more information about what the
iomap maps (attribute extents rather than file data extents) to for
the validity cookie to cover all the types of iomaps we might need
to validate.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
introduce a new ioctl to replace the whole content of a file atomically,
which means it induces truncate and content update at the same time.
We can start it with F2FS_IOC_START_ATOMIC_REPLACE and complete it with
F2FS_IOC_COMMIT_ATOMIC_WRITE. Or abort it with
F2FS_IOC_ABORT_ATOMIC_WRITE.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
* Enable PWM feature on Intel pin control IPs
The following is an automated git shortlog grouped by driver:
intel:
- Enumerate PWM device when community has a capability
pwm:
- lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
- lpss: Allow other drivers to enable PWM LPSS
- lpss: Include headers we are the direct user of
- lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
- Add a stub for devm_pwmchip_add()
-----BEGIN PGP SIGNATURE-----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=ewrB
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.2-2
* Enable PWM feature on Intel pin control IPs
The following is an automated git shortlog grouped by driver:
intel:
- Enumerate PWM device when community has a capability
pwm:
- lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
- lpss: Allow other drivers to enable PWM LPSS
- lpss: Include headers we are the direct user of
- lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
- Add a stub for devm_pwmchip_add()
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
-----BEGIN PGP SIGNATURE-----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=/1yt
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
Architecture code might want to use it even if CONFIG_HAVE_KVM_IRQ_ROUTING
is false; for example PPC XICS has KVM_IRQ_LINE and wants to use
kvm_arch_irqchip_in_kernel from there, but it does not have
KVM_SET_GSI_ROUTING so the prototype was not provided.
Fixes: d663b8a285 ("KVM: replace direct irq.h inclusion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
<linux/kernel.h> is included only for using container_of().
Include <linux/container_of.h> instead, it is much lighter.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Clean up after commit 22700f3c6d ("SUNRPC: Improve ordering of
transport processing").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Instead of converting the virtual address to physical directly.
This is a precursor patch for the upcoming support for TSC page mapping into
Microsoft Hypervisor root partition, where TSC PFN will be defined by the
hypervisor and thus can't be obtained by linear translation of the physical
address.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-kernel@vger.kernel.org
CC: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833939.218190.14095015146003109462.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
