commit 195b9cb5b2 upstream.
Ensure running fprobe_exit_handler() has finished before
calling rethook_free() in the unregister_fprobe() so that caller can free
the fprobe right after unregister_fprobe().
unregister_fprobe() ensured that all running fprobe_entry/exit_handler()
have finished by calling unregister_ftrace_function() which synchronizes
RCU. But commit 5f81018753 ("fprobe: Release rethook after the ftrace_ops
is unregistered") changed to call rethook_free() after
unregister_ftrace_function(). So call rethook_stop() to make rethook
disabled before unregister_ftrace_function() and ensure it again.
Here is the possible code flow that can call the exit handler after
unregister_fprobe().
------
CPU1 CPU2
call unregister_fprobe(fp)
...
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == fprobe_exit_handler
call fprobe_exit_handler()
rethook_free():
set rh->handler = NULL;
return from unreigster_fprobe;
call fp->exit_handler() <- (*)
------
(*) At this point, the exit handler is called after returning from
unregister_fprobe().
This fixes it as following;
------
CPU1 CPU2
call unregister_fprobe()
...
rethook_stop():
set rh->handler = NULL;
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == NULL
return from rethook
rethook_free()
return from unreigster_fprobe;
------
Link: https://lore.kernel.org/all/168873859949.156157.13039240432299335849.stgit@devnote2/
Fixes: 5f81018753 ("fprobe: Release rethook after the ftrace_ops is unregistered")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a82d62f708 upstream.
This reverts commit eb26dfe8aa.
Commit eb26dfe8aa ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.
In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.
Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.
Fixes: eb26dfe8aa ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72f1de49ff upstream.
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb6e04a173 upstream.
gcc-13 warns about function definitions for builtin interfaces that have a
different prototype, e.g.:
In file included from kasan_test.c:31:
kasan.h:574:6: error: conflicting types for built-in function '__asan_register_globals'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch]
574 | void __asan_register_globals(struct kasan_global *globals, size_t size);
kasan.h:577:6: error: conflicting types for built-in function '__asan_alloca_poison'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch]
577 | void __asan_alloca_poison(unsigned long addr, size_t size);
kasan.h:580:6: error: conflicting types for built-in function '__asan_load1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
580 | void __asan_load1(unsigned long addr);
kasan.h:581:6: error: conflicting types for built-in function '__asan_store1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
581 | void __asan_store1(unsigned long addr);
kasan.h:643:6: error: conflicting types for built-in function '__hwasan_tag_memory'; expected 'void(void *, unsigned char, long int)' [-Werror=builtin-declaration-mismatch]
643 | void __hwasan_tag_memory(unsigned long addr, u8 tag, unsigned long size);
The two problems are:
- Addresses are passes as 'unsigned long' in the kernel, but gcc-13
expects a 'void *'.
- sizes meant to use a signed ssize_t rather than size_t.
Change all the prototypes to match these. Using 'void *' consistently for
addresses gets rid of a couple of type casts, so push that down to the
leaf functions where possible.
This now passes all randconfig builds on arm, arm64 and x86, but I have
not tested it on the other architectures that support kasan, since they
tend to fail randconfig builds in other ways. This might fail if any of
the 32-bit architectures expect a 'long' instead of 'int' for the size
argument.
The __asan_allocas_unpoison() function prototype is somewhat weird, since
it uses a pointer for 'stack_top' and an size_t for 'stack_bottom'. This
looks like it is meant to be 'addr' and 'size' like the others, but the
implementation clearly treats them as 'top' and 'bottom'.
Link: https://lkml.kernel.org/r/20230509145735.9263-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 150e33e62c ]
Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------
Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.
[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/
v1 -> v2: Fix commit message
Fixes: d4b36210c2 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d800bc500 ]
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be
able to report statistics (which is future work), it seems that we need
to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO)
multiplexing, and pass the command as part of the common portion of the
muxed structure.
Since we already have an "enable" variable in tc_taprio_qopt_offload,
refactor all drivers to check for "cmd" instead of "enable", and reject
every other command except "replace" and "destroy" - to be future proof.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8046063df8 ("igc: Rename qbv_enable to taprio_offload_enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76631ffa2f ]
Previously the clients_lock was protecting the clients array against
concurrent addition/removal of clients but was also accessed from IRQ
context. This meant that it had to be a spinlock and that the add() and
remove() callbacks in which clients need to do allocation and take
mutexes can't be called under the clients_lock. To work around this these
callbacks were moved to workqueues. This not only introduced significant
complexity but is also subtly broken in at least one way.
In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to
communicate the added/removed ISM device to the work function. While
write access to client[i]->tgt_ism is protected by the clients_lock and
the code waits that there is no pending add/remove work before and after
setting clients[i]->tgt_ism this is not enough. The problem is that the
wait happens based on per ISM device counters. Thus a concurrent
ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite
a clients[i]->tgt_ism between unlocking the clients_lock and the
subsequent wait for the work to finnish.
Thankfully with the clients_lock no longer held in IRQ context it can be
turned into a mutex which can be held during the calls to add()/remove()
completely removing the need for the workqueues and the associated
broken housekeeping including the per ISM device counters and the
clients[i]->tgt_ism.
Fixes: 89e7d2ba61 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b5c13b591 ]
The clients array references all registered clients and is protected by
the clients_lock. Besides its use as general list of clients the clients
array is accessed in ism_handle_irq() to forward ISM device events to
clients.
While the clients_lock is taken in the IRQ handler when calling
handle_event() it is however incorrectly not held during the
client->handle_irq() call and for the preceding clients[] access leaving
it unprotected against concurrent client (un-)registration.
Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb()
and ism_unregister_dmb() are not protected by any lock. This is
especially problematic as the client ID from the ism->sba_client_arr[]
is not checked against NO_CLIENT and neither is the client pointer
checked.
Instead of expanding the use of the clients_lock further add a separate
array in struct ism_dev which references clients subscribed to the
device's events and IRQs. This array is protected by ism->lock which is
already taken in ism_handle_irq() and can be taken outside the IRQ
handler when adding/removing subscribers or the accessing
ism->sba_client_arr[]. This also means that the clients_lock is no
longer taken in IRQ context.
Fixes: 89e7d2ba61 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60819149b ]
In a future change we will need to make
ocelot_port_update_active_preemptible_tcs() call
vsc9959_tas_guard_bands_update(), but that is currently not possible,
since the ocelot switch lib does not have access to functions private to
the DSA wrapper.
Move the pointer to vsc9959_tas_guard_bands_update() from felix->info
(which is private to the DSA driver) to ocelot->ops (which is also
visible to the ocelot switch lib).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c6efb4ae38 ("net: mscc: ocelot: fix oversize frame dropping for preemptible TCs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fb48d88e7 ]
When a device-mapper device is passing through the inline encryption
support of an underlying device, calls to blk_crypto_evict_key() take
the blk_crypto_profile::lock of the device-mapper device, then take the
blk_crypto_profile::lock of the underlying device (nested). This isn't
a real deadlock, but it causes a lockdep report because there is only
one lock class for all instances of this lock.
Lockdep subclasses don't really work here because the hierarchy of block
devices is dynamic and could have more than 2 levels.
Instead, register a dynamic lock class for each blk_crypto_profile, and
associate that with the lock.
This avoids false-positive lockdep reports like the following:
============================================
WARNING: possible recursive locking detected
6.4.0-rc5 #2 Not tainted
--------------------------------------------
fscryptctl/1421 is trying to acquire lock:
ffffff80829ca418 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0x44/0x1c0
but task is already holding lock:
ffffff8086b68ca8 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0xc8/0x1c0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&profile->lock);
lock(&profile->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
Fixes: 1b26283970 ("block: Keyslot Manager for Inline Encryption")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230610061139.212085-1-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaf9e7192e ]
Originally this used jhash2() over tuple and folded the zone id,
the pernet hash value, destination port and l4 protocol number into the
32bit seed value.
When the switch to siphash was done, I used an on-stack temporary
buffer to build a suitable key to be hashed via siphash().
But this showed up as performance regression, so I got rid of
the temporary copy and collected to-be-hashed data in 4 u64 variables.
This makes it easy to build tuples that produce the same hash, which isn't
desirable even though chain lengths are limited.
Switch back to plain siphash, but just like with jhash2(), take advantage
of the fact that most of to-be-hashed data is already in a suitable order.
Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark
last member that can be used as hash input.
The only remaining data that isn't present in the tuple structure are the
zone identifier and the pernet hash: fold those into the key.
Fixes: d2c806abcf ("netfilter: conntrack: use siphash_4u64")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1689f25924 ]
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 36ce9d76b0 upstream.
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com
Fixes: c3b1b1cbf0 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e910c8e3aa upstream.
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning
for the autofs_dev_ioctl structure:
In function 'check_name',
inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9,
inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8:
fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
33 | if (!strchr(name, '/'))
| ^~~~~~~~~~~~~~~~~
In file included from include/linux/auto_dev-ioctl.h:10,
from fs/autofs/autofs_i.h:10,
from fs/autofs/dev-ioctl.c:14:
include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl':
include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0
112 | char path[0];
| ^~~~
This is easily fixed by changing the gnu 0-length array into a c99
flexible array. Since this is a uapi structure, we have to be careful
about possible regressions but this one should be fine as they are
equivalent here. While it would break building with ancient gcc versions
that predate c99, it helps building with --std=c99 and -Wpedantic builds
in user space, as well as non-gnu compilers. This means we probably
also want it fixed in stable kernels.
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 943211c874 upstream.
NULL the dangling pipe reference while clearing watch_queue.
If not done, a reference to a freed pipe remains in the watch_queue,
as this function is called before freeing a pipe in free_pipe_info()
(see line 834 of fs/pipe.c).
The sole use of wqueue->defunct is for checking if the watch queue has
been cleared, but wqueue->pipe is also NULLed while clearing.
Thus, wqueue->defunct is superfluous, as wqueue->pipe can be checked
for NULL. Hence, the former can be removed.
Tested with keyutils testsuite.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Acked-by: David Howells <dhowells@redhat.com>
Message-Id: <20230605143616.640517-1-code@siddh.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a372d66af4 ]
incl_srcpt has the limitation, mentioned in commit b4638af888 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.
The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463d3 ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af888 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).
If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.
This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).
Fixes: 227d07a07e ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f55453ea ]
When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.
Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4cc8 ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45d0fcb5bc ]
In a future change, the driver will need to determine whether PTP RX
timestamping is enabled on a port (including whether traps were set up
on that port in particular) and that is currently not possible.
The driver supports different RX filters (L2, L4) and kinds of TX
timestamping (one-step, two-step) on its ports, but it saves all
configuration in a single struct hwtstamp_config that is global to the
switch. So, the latest timestamping configuration on one port
(including a request to disable timestamping) affects what gets reported
for all ports, even though the configuration itself is still individual
to each port.
The port timestamping configurations are only coupled because of the
common structure, so replace the hwtstamp_config with a mask of trapped
protocols saved per port. We also have the ptp_cmd to distinguish
between one-step and two-step PTP timestamping, so with those 2 bits of
information we can fully reconstruct a descriptive struct
hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl.
Fixes: 4e3b0468e6 ("net: mscc: PTP Hardware Clock (PHC) support")
Fixes: 96ca08c058 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1d2ba10f5 ]
bitmap_{from,to}_arr64() optimization is overly optimistic on 32-bit LE
architectures when it's wired to bitmap_copy_clear_tail().
bitmap_copy_clear_tail() takes care of unused bits in the bitmap up to
the next word boundary. But on 32-bit machines when copying bits from
bitmap to array of 64-bit words, it's expected that the unused part of
a recipient array must be cleared up to 64-bit boundary, so the last 4
bytes may stay untouched when nbits % 64 <= 32.
While the copying part of the optimization works correct, that clear-tail
trick makes corresponding tests reasonably fail:
test_bitmap: bitmap_to_arr64(nbits == 1): tail is not safely cleared: 0xa5a5a5a500000001 (must be 0x0000000000000001)
Fix it by removing bitmap_{from,to}_arr64() optimization for 32-bit LE
arches.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20230225184702.GA3587246@roeck-us.net/
Fixes: 0a97953fd2 ("lib: add bitmap_{from,to}_arr64")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df49f2a0ac ]
This reverts commit edd60d24bd.
Heikki reports that this should not be a global flag just to work around
one broken driver and should be fixed differently, so revert it.
Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Fixes: edd60d24bd ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection")
Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com
Cc: Prashanth K <quic_prashk@quicinc.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edd60d24bd ]
Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.
To avoid this, added a new constant in enum usb_role, last_role
is set to USB_ROLE_UNKNOWN before performing initial detection.
While at it, also handle default case for the usb_role switch
in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid
build warnings.
Fixes: 4602f3bff2 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8ac296114 ]
IRQ0 is no longer returned by platform_get_irq() and its ilk -- they now
return -EINVAL instead. However, the kernel code supporting SH3/4-based
SoCs still maps the IRQ #s starting at 0 -- modify that code to start the
IRQ #s from 16 instead.
The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
indeed are using IRQ0 for the SMSC911x compatible Ethernet chip.
Fixes: ce753ad154 ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/71105dbf-cdb0-72e1-f9eb-eeda8e321696@omp.ru
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26ae58f65e ]
VIDIOC_ENUMINPUT documentation describes the tuner field of
struct v4l2_input as index:
Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
"
* - __u32
- ``tuner``
- Capture devices can have zero or more tuners (RF demodulators).
When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
RF connector and this field identifies the tuner. It corresponds
to struct :c:type:`v4l2_tuner` field ``index``. For
details on tuners see :ref:`tuner`.
"
Drivers I could find also use the 'tuner' field as an index, e.g.:
drivers/media/pci/bt8xx/bttv-driver.c bttv_enum_input()
drivers/media/usb/go7007/go7007-v4l2.c vidioc_enum_input()
However, the UAPI comment claims this field is 'enum v4l2_tuner_type':
include/uapi/linux/videodev2.h
This field being 'enum v4l2_tuner_type' is unlikely as it seems to be
never used that way in drivers, and documentation confirms it. It seem
this comment got in accidentally in the commit which this patch fixes.
Fix the UAPI comment to stop confusion.
This was pointed out by Dmitry while reviewing VIDIOC_ENUMINPUT
support for strace.
Fixes: 6016af82ea ("[media] v4l2: use __u32 rather than enums in ioctl() structs")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6375a2d1 ]
Use the intended pointer types for p_s32 and p_64 in the union of the
struct v4l2_ext_control.
Fixes: e77eb66342 ("videodev2.h: add p_s32 and p_s64 pointers")
Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7d552071 ]
Currently, the pci_resume method has only a flag indicating whether the
system is resuming from hibernation. In order to handle all PM events like
AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from
s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM
events.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1c024241d0 ("xhci: Improve the XHCI system resume time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95a55437dc upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0fef6bb730 ]
In MCQ mode, when a device command uses a hardware queue shared with other
commands, a race condition may occur in the following scenario:
1. A device command is completed in CQx with CQE entry "e".
2. The interrupt handler copies the "cqe" pointer to "hba->dev_cmd.cqe"
and completes "hba->dev_cmd.complete".
3. The "ufshcd_wait_for_dev_cmd()" function is awakened and retrieves the
OCS value from "hba->dev_cmd.cqe".
However, there is a possibility that the CQE entry "e" will be overwritten
by newly completed commands in CQx, resulting in an incorrect OCS value
being received by "ufshcd_wait_for_dev_cmd()".
To avoid this race condition, the OCS value should be immediately copied to
the struct "lrb" of the device command. Then "ufshcd_wait_for_dev_cmd()"
can retrieve the OCS value from the struct "lrb".
Fixes: 57b1c0ef89 ("scsi: ufs: core: mcq: Add support to allocate multiple queues")
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Link: https://lore.kernel.org/r/20230610021553.1213-2-powen.kao@mediatek.com
Tested-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aa5ac6332 ]
Add a pci_clear_master() stub when CONFIG_PCI is not set so drivers that
support both PCI and platform devices don't need #ifdefs or extra Kconfig
symbols for the PCI parts.
[bhelgaas: commit log]
Fixes: 6a479079c0 ("PCI: Add pci_clear_master() as opposite of pci_set_master()")
Link: https://lore.kernel.org/r/20230531102744.2354313-1-suijingfeng@loongson.cn
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f1a83c72 ]
According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and the frequency range for the VCO_out
calculator were incorrect. This information was contradicted in other
parts of the mini, nano and plus manuals. After reaching out to my
NXP Rep, when confronting him about discrepencies in the Nano manual,
he responded with:
"Yes it is definitely wrong, the one that is part
of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P,
PMS_M and PMS_S is not correct. I will report this to Doc team,
the one customer should be take into account is the Table 13-40
DPHY PLL Parameters and the Note above."
These updated values also match what is used in the NXP downstream
kernel.
To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.
Fixes: 4d562c70c4 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-3-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e0285ab95 ]
The TUSB6010 (MUSB) device is picking up some GPIO lines
hardcoded by number and passing on to the TUSB6010 device
when registering it.
Instead of nasty workarounds, provide a GPIO descriptor
table and then make the TUSB6010 MUSB glue driver pick up
the GPIO lines directly, convert it to an IRQ and pass down
to the MUSB driver. OMAP2 is the only system using the
TUSB6010.
Stash the GPIO descriptors in the glue layer and use
then to power up and down the TUSB6010 on-demand, instead
of using boardfile callbacks.
Since the OMAP2 boards are the only boards using the
.set_power() and .board_set_power() callbacks, we can
just delete them as the power is now handled directly
in the TUSB6010 glue code.
Cc: Bin Liu <b-liu@ti.com>
Cc: linux-usb@vger.kernel.org
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5f4fa60d6 ]
The TWL4030 GPIO driver has a custom platform data .set_up()
callback to call back into the platform and do misc stuff such
as hog and export a GPIO for WLAN PWR on a specific OMAP3 board.
Avoid all the kludgery in the platform data and the boardfile
and just put the quirks right into the driver. Make it
conditional on OMAP3.
I think the exported GPIO is used by some kind of userspace
so ordinary DTS hogs will probably not work.
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e519f0bb64 ]
A recent change to the OMAP driver making it use a dynamic GPIO
base created problems with some old OMAP1 board files, among
them Nokia 770, SX1 and also the OMAP2 Nokia n8x0.
Fix up all instances of GPIOs being used for the MMC driver
by pushing the handling of power, slot selection and MMC
"cover" into the driver as optional GPIOs.
This is maybe not the most perfect solution as the MMC
framework have some central handlers for some of the
stuff, but it at least makes the situtation better and
solves the immediate issue.
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 767d83361a ]
The Nokia 770 is using GPIOs from the global numberspace on the
CBUS node to pass down to the LCD controller. This regresses when we
let the OMAP GPIO driver use dynamic GPIO base.
The Nokia 770 now has dynamic allocation of IRQ numbers, so this
needs to be fixed for it to work.
As this is the only user of LCD MIPID we can easily augment the
driver to use a GPIO descriptor instead and resolve the issue.
The platform data .shutdown() callback wasn't even used in the
code, but we encode a shutdown asserting RESET in the remove()
callback for completeness sake.
The CBUS also has the ADS7846 touchscreen attached.
Populate the devices on the Nokia 770 CBUS I2C using software
nodes instead of platform data quirks. This includes the LCD
and the ADS7846 touchscreen so the conversion just brings the LCD
along with it as software nodes is an all-or-nothing design
pattern.
The ADS7846 has some limited support for using GPIO descriptors,
let's convert it over completely to using device properties and then
fix all remaining boardfile users to provide all platform data using
software nodes.
Dump the of includes and of_match_ptr() in the ADS7846 driver as part
of the job.
Since we have to move ADS7846 over to obtaining the GPIOs it is
using exclusively from descriptors, we provide descriptor tables
for the two remaining in-kernel boardfiles using ADS7846:
- PXA Spitz
- MIPS Alchemy DB1000 development board
It was too hard for me to include software node conversion of
these two remaining users at this time: the spitz is using a
hscync callback in the platform data that would require further
GPIO descriptor conversion of the Spitz, and moving the hsync
callback down into the driver: it will just become too big of
a job, but it can be done separately.
The MIPS Alchemy DB1000 is simply something I cannot test, so take
the easier approach of just providing some GPIO descriptors in
this case as I don't want the patch to grow too intrusive.
As we see that several device trees have incorrect polarity flags
and just expect to bypass the gpiolib polarity handling, fix up
all device trees too, in a separate patch.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c32c81f3db ]
Aaro reports problems on the OSK1 board after we altered
the dynamic base for GPIO allocations.
It appears this happens because the OMAP driver now
allocates GPIO numbers dynamically, so all that is
references by number is a bit up in the air.
Let's bite the bullet and try to just move the gpio_chip
in the tps65010 MFD driver over to using dynamic allocations.
Alter everything in the OSK1 board file to use a GPIO
descriptor table and lookups.
Utilize the NULL device to define some board-specific
GPIO lookups and use these to immediately look up the
same GPIOs, convert to IRQ numbers and pass as resources
to the devices. This is ugly but should work.
The .setup() callback for tps65010 was used for some GPIO
hogging, but since the OSK1 is the only user in the entire
kernel we can alter the signatures to something that
is helpful and make a clean transition.
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: andy.shevchenko@gmail.com
Cc: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b25320887 ]
Create a new fixed-point helper to allow us to return the rounded value
of our fixed point value.
[v2]:
* Create the function drm_fixp2int_round() (Melissa Wen).
[v3]:
* Use drm_fixp2int() instead of shifting manually (Arthur Grillo).
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-1-mcanal@igalia.com
Stable-dep-of: ab87f558dc ("drm/vkms: Fix RGB565 pixel conversion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06f925f13 ]
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc5 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid().
Fixes: 64fdc5f341 ("net: dsa: sync unicast and multicast addresses for VLAN filters too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fde4c557f ]
The Stuff Bit Count is always coded on 4 bits [1]. Update the Stuff
Bit Count size accordingly.
In addition, the CRC fields of CAN FD Frames contain stuff bits at
fixed positions called fixed stuff bits [2]. The CRC field starts with
a fixed stuff bit and then has another fixed stuff bit after each
fourth bit [2], which allows us to derive this formula:
FSB count = 1 + round_down(len(CRC field)/4)
The length of the CRC field is [1]:
len(CRC field) = len(Stuff Bit Count) + len(CRC)
= 4 + len(CRC)
with len(CRC) either 17 or 21 bits depending of the payload length.
In conclusion, for CRC17:
FSB count = 1 + round_down((4 + 17)/4)
= 6
and for CRC 21:
FSB count = 1 + round_down((4 + 21)/4)
= 7
Add a Fixed Stuff bits (FSB) field with above values and update
CANFD_FRAME_OVERHEAD_SFF and CANFD_FRAME_OVERHEAD_EFF accordingly.
[1] ISO 11898-1:2015 section 10.4.2.6 "CRC field":
The CRC field shall contain the CRC sequence followed by a recessive
CRC delimiter. For FD Frames, the CRC field shall also contain the
stuff count.
Stuff count
If FD Frames, the stuff count shall be at the beginning of the CRC
field. It shall consist of the stuff bit count modulo 8 in a 3-bit
gray code followed by a parity bit [...]
[2] ISO 11898-1:2015 paragraph 10.5 "Frame coding":
In the CRC field of FD Frames, the stuff bits shall be inserted at
fixed positions; they are called fixed stuff bits. There shall be a
fixed stuff bit before the first bit of the stuff count, even if the
last bits of the preceding field are a sequence of five consecutive
bits of identical value, there shall be only the fixed stuff bit,
there shall not be two consecutive stuff bits. A further fixed stuff
bit shall be inserted after each fourth bit of the CRC field [...]
Fixes: 85d99c3e2a ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer")
Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Link: https://lore.kernel.org/all/20230611025728.450837-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a5cb79762 ]
When calling bpf_sk_lookup_tcp(), bpf_sk_lookup_udp() or
bpf_skc_lookup_tcp() from tc/xdp ingress, VRF socket bindings aren't
respoected, i.e. unbound sockets are returned, and bound sockets aren't
found.
VRF binding is determined by the sdif argument to sk_lookup(), however
when called from tc the IP SKB control block isn't initialized and thus
inet{,6}_sdif() always returns 0.
Fix by calculating sdif for the tc/xdp flows by observing the device's
l3 enslaved state.
The cg/sk_skb hooking points which are expected to support
inet{,6}_sdif() pass sdif=-1 which makes __bpf_skc_lookup() use the
existing logic.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20230621104211.301902-4-gilad9366@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c467c8f081 ]
This microSD card never clears Flush Cache bit after cache flush has
been started in sd_flush_cache(). This leads e.g. to failure to mount
file system. Add a quirk which disables the SD cache for this specific
card from specific manufacturing date of 11/2019, since on newer dated
cards from 05/2023 the cache flush works correctly.
Fixes: 08ebf903af ("mmc: core: Fixup support for writeback-cache for eMMC and SD")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ec272c586 ]
Patch series "watchdog: Cleanup / fixes after buddy series v5 reviews".
This patch series attempts to finish resolving the feedback received
from Petr Mladek on the v5 series I posted.
Probably the only thing that wasn't fully as clean as Petr requested was
the Kconfig stuff. I couldn't find a better way to express it without a
more major overhaul. In the very least, I renamed "NON_ARCH" to
"PERF_OR_BUDDY" in the hopes that will make it marginally better.
Nothing in this series is terribly critical and even the bugfixes are
small. However, it does cleanup a few things that were pointed out in
review.
This patch (of 10):
The permissions for the kernel.nmi_watchdog sysctl have always been set at
compile time despite the fact that a watchdog can fail to probe. Let's
fix this and set the permissions based on whether the hardlockup detector
actually probed.
Link: https://lkml.kernel.org/r/20230527014153.2793931-1-dianders@chromium.org
Link: https://lkml.kernel.org/r/20230526184139.1.I0d75971cc52a7283f495aac0bd5c3041aadc734e@changeid
Fixes: a994a3147e ("watchdog/hardlockup/perf: Implement init time detection of perf")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Petr Mladek <pmladek@suse.com>
Closes: https://lore.kernel.org/r/ZHCn4hNxFpY5-9Ki@alley
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 930d8f8dba ]
When lockup_detector_init()->watchdog_hardlockup_probe(), PMU may be not
ready yet. E.g. on arm64, PMU is not ready until
device_initcall(armv8_pmu_driver_init). And it is deeply integrated with
the driver model and cpuhp. Hence it is hard to push this initialization
before smp_init().
But it is easy to take an opposite approach and try to initialize the
watchdog once again later. The delayed probe is called using workqueues.
It need to allocate memory and must be proceed in a normal context. The
delayed probe is able to use if watchdog_hardlockup_probe() returns
non-zero which means the return code returned when PMU is not ready yet.
Provide an API - lockup_detector_retry_init() for anyone who needs to
delayed init lockup detector if they had ever failed at
lockup_detector_init().
The original assumption is: nobody should use delayed probe after
lockup_detector_check() which has __init attribute. That is, anyone uses
this API must call between lockup_detector_init() and
lockup_detector_check(), and the caller must have __init attribute
Link: https://lkml.kernel.org/r/20230519101840.v5.16.If4ad5dd5d09fb1309cebf8bcead4b6a5a7758ca7@changeid
Reviewed-by: Petr Mladek <pmladek@suse.com>
Co-developed-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9ec272c586 ("watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df95d3085c ]
Do a search and replace of:
- NMI_WATCHDOG_ENABLED => WATCHDOG_HARDLOCKUP_ENABLED
- SOFT_WATCHDOG_ENABLED => WATCHDOG_SOFTOCKUP_ENABLED
- watchdog_nmi_ => watchdog_hardlockup_
- nmi_watchdog_available => watchdog_hardlockup_available
- nmi_watchdog_user_enabled => watchdog_hardlockup_user_enabled
- soft_watchdog_user_enabled => watchdog_softlockup_user_enabled
- NMI_WATCHDOG_DEFAULT => WATCHDOG_HARDLOCKUP_DEFAULT
Then update a few comments near where names were changed.
This is specifically to make it less confusing when we want to introduce
the buddy hardlockup detector, which isn't using NMIs. As part of this,
we sanitized a few names for consistency.
[trix@redhat.com: make variables static]
Link: https://lkml.kernel.org/r/20230525162822.1.I0fb41d138d158c9230573eaa37dc56afa2fb14ee@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.12.I91f7277bab4bf8c0cb238732ed92e7ce7bbd71a6@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9ec272c586 ("watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81972551df ]
The perf hardlockup detector works by looking at interrupt counts and
seeing if they change from run to run. The interrupt counts are managed
by the common watchdog code via its watchdog_timer_fn().
Currently the API between the perf detector and the common code is a
function: is_hardlockup(). When the hard lockup detector sees that
function return true then it handles printing out debug info and inducing
a panic if necessary.
Let's change the API a little bit in preparation for the buddy hardlockup
detector. The buddy hardlockup detector wants to print nearly the same
debug info and have nearly the same panic behavior. That means we want to
move all that code to the common file. For now, the code in the common
file will only be there if the perf hardlockup detector is enabled, but
eventually it will be selected by a common config.
Right now, this _just_ moves the code from the perf detector file to the
common file and changes the names. It doesn't make the changes that the
buddy hardlockup detector will need and doesn't do any style cleanups. A
future patch will do cleanup to make it more obvious what changed.
With the above, we no longer have any callers of is_hardlockup() outside
of the "watchdog.c" file, so we can remove it from the header, make it
static, and move it to the same "#ifdef" block as our new
watchdog_hardlockup_check(). While doing this, it can be noted that even
if no hardlockup detectors were configured the existing code used to still
have the code for counting/checking "hrtimer_interrupts" even if the perf
hardlockup detector wasn't configured. We didn't need to do that, so move
all the "hrtimer_interrupts" counting to only be there if the perf
hardlockup detector is configured as well.
This change is expected to be a no-op.
Link: https://lkml.kernel.org/r/20230519101840.v5.8.Id4133d3183e798122dc3b6205e7852601f289071@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9ec272c586 ("watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1753fd02a ]
The mm_struct mm_count field is frequently updated by mmgrab/mmdrop
performed by context switch. This causes false-sharing for surrounding
mm_struct fields which are read-mostly.
This has been observed on a 2sockets/112core/224cpu Intel Sapphire Rapids
server running hackbench, and by the kernel test robot will-it-scale
testcase.
Move the mm_count field into its own cache line to prevent false-sharing
with other mm_struct fields.
Move mm_count to the first field of mm_struct to minimize the amount of
padding required: rather than adding padding before and after the mm_count
field, padding is only added after mm_count.
Note that I noticed this odd comment in mm_struct:
commit 2e3025434a ("mm: relocate 'write_protect_seq' in struct mm_struct")
/*
* With some kernel config, the current mmap_lock's offset
* inside 'mm_struct' is at 0x120, which is very optimal, as
* its two hot fields 'count' and 'owner' sit in 2 different
* cachelines, and when mmap_lock is highly contended, both
* of the 2 fields will be accessed frequently, current layout
* will help to reduce cache bouncing.
*
* So please be careful with adding new fields before
* mmap_lock, which can easily push the 2 fields into one
* cacheline.
*/
struct rw_semaphore mmap_lock;
This comment is rather odd for a few reasons:
- It requires addition/removal of mm_struct fields to carefully consider
field alignment of _other_ fields,
- It expresses the wish to keep an "optimal" alignment for a specific
kernel config.
I suspect that the author of this comment may want to revisit this topic
and perhaps introduce a split-struct approach for struct rw_semaphore,
if the need is to place various fields of this structure in different
cache lines.
Link: https://lkml.kernel.org/r/20230515143536.114960-1-mathieu.desnoyers@efficios.com
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Fixes: af7f588d8f ("sched: Introduce per-memory-map concurrency ID")
Link: https://lore.kernel.org/lkml/7a0c1db1-103d-d518-ed96-1584a28fbf32@efficios.com
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202305151017.27581d75-yujie.liu@intel.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Olivier Dion <odion@efficios.com>
Cc: <michael.christie@oracle.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce6e1f600b ]
The common information length is found in the first octet of the common
information.
Fixes: 0f48b8b88a ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
