[ Upstream commit 3489182b11 ]
Commit bb726b753f ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.
While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2b7 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.
As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.
Fixes: bb726b753f ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 603ead9658 ]
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d80f8e96d4 ]
In newer hardware, IPA supports more than 32 endpoints. Some
registers--such as IPA interrupt registers--represent endpoints
as bits in a 4-byte register, and such registers are repeated as
needed to represent endpoints beyond the first 32.
In ipa_interrupt_suspend_clear_all(), we clear all pending IPA
suspend interrupts by reading all status register(s) and writing
corresponding registers to clear interrupt conditions.
Unfortunately the number of registers to read/write is calculated
incorrectly, and as a result we access *many* more registers than
intended. This bug occurs only when the IPA hardware signals a
SUSPEND interrupt, which happens when a packet is received for an
endpoint (or its underlying GSI channel) that is suspended. This
situation is difficult to reproduce, but possible.
Fix this by correctly computing the number of interrupt registers to
read and write. This is the only place in the code where registers
that map endpoints or channels this way perform this calculation.
Fixes: f298ba785e ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1ae9b71c ]
AF reserves MCAM entries for each PF, VF present in the
system and populates the entry with DMAC and action with
default RSS so that basic packet I/O works. Since PF/VF is
not aware of the RSS action installed by AF, AF only fixup
the actions of the rules installed by PF/VF with corresponding
default RSS action. This worked well for rules installed by
PF/VF for features like RX VLAN offload and DMAC filters but
rules involving action like drop/forward to queue are also
getting modified by AF. Hence fix it by setting the default
RSS action only if requested by PF/VF.
Fixes: 967db3529e ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f120e62e37 ]
A sanity check for OOB write is off by one leading to a false positive
when the array is full.
Fixes: 9b90aca97f ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b76d928f8 ]
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The ASP driver
essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97dde84026 ]
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
when dereferencing calling netdev_err().
Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument
to request_irq() during interrupt initialization (that is, the net_device
and rx/tx queue pointers initialized at the time of the call) and since
there are usually no checks for the 'dev_id' argument in such handlers
in other drivers, remove these checks from the handlers in stmmac driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8532f613bc ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23c0af103 ]
mac80211 does not have proper support for EPCS currently as that would
require changing the ECDA parameters if EPCS (Emergency Preparedness
Communications Service) is in use. As such, do not announce support for
it in the capabilities.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411d05354fb9fb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2aa0a5e65e upstream.
The TDCO calculation was done using the currently applied data bittiming,
instead of the newly computed data bittiming, which means that the TDCO
had an invalid value unless setting the same data bittiming twice.
Fixes: d99755f71a ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)")
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cae43da98 upstream.
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.
Cc: stable@vger.kernel.org
Fixes: 8552085646 ("hv_netvsc: Fix race of register_netdevice_notifier and VF register")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38cc3c6dcc upstream.
As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.
To fix the issue without introducing a new lock, split the statics into
three parts:
1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,
Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.
Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().
For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats.
Fixes: 133466c3bb ("net: stmmac: use per-queue 64 bit statistics where necessary")
Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9def04e759 upstream.
The below commit introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
When cpsw_new resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:
WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66
Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc4ce46b1e upstream.
The below commit introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
When cpsw resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:
WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66
Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7198383ef upstream.
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station.
Cc: stable@vger.kernel.org
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 353d321f63 upstream.
The storage for the TLV PC register data wasn't done like all
the other storage in the drv->fw area, which is cleared at the
end of deallocation. Therefore, the freeing must also be done
differently, explicitly NULL'ing it out after the free, since
otherwise there's a nasty double-free bug here if a file fails
to load after this has been parsed, and we get another free
later (e.g. because no other file exists.) Fix that by adding
the missing NULL assignment.
Cc: stable@vger.kernel.org
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Reported-by: Guy Kaplan <guy.kaplan@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a1c13303f upstream.
When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.
The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.
The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.
We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.
Fixes: 20cce88650 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f4d6f011b upstream.
Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3d4f7f228 upstream.
The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.
This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.
Fixes: 4cb584e0ee ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a007b8009 upstream.
The nfp driver will merge the tp source port and tp destination port
into one dword which the offset must be zero to do hardware offload.
However, the mangle action for the tp source port and tp destination
port is separated for tc ct action. Modify the mangle action for the
FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to
satisfy the nfp driver offload check for the tp port.
The mangle action provides a 4B value for source, and a 4B value for
the destination, but only 2B of each contains the useful information.
For offload the 2B of each is combined into a single 4B word. Since the
incoming mask for the source is '0xFFFF<mask>' the shift-left will
throw away the 0xFFFF part. When this gets combined together in the
offload it will clear the destination field. Fix this by setting the
lower bits back to 0xFFFF, effectively doing a rotate-left operation on
the mask.
Fixes: 5cee92c6f5 ("nfp: flower: support hw offload for ct nat action")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cefa98e806 upstream.
The nfp offload flow pay will not allocate a mask id when the out port
is openvswitch internal port. This is because these flows are used to
configure the pre_tun table and are never actually send to the firmware
as an add-flow message. When a tc rule which action contains ct and
the post ct entry's out port is openvswitch internal port, the merge
offload flow pay with the wrong mask id of 0 will be send to the
firmware. Actually, the nfp can not support hardware offload for this
situation, so return EOPNOTSUPP.
Fixes: bd0fe7f96a ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows")
CC: stable@vger.kernel.org # 5.14+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 585b40e25d upstream.
Not all mv88e6xxx device support C45 read/write operations. Those
which do not return -EOPNOTSUPP. However, when phylib scans the bus,
it considers this fatal, and the probe of the MDIO bus fails, which in
term causes the mv88e6xxx probe as a whole to fail.
When there is no device on the bus for a given address, the pull up
resistor on the data line results in the read returning 0xffff. The
phylib core code understands this when scanning for devices on the
bus. C45 allows multiple devices to be supported at one address, so
phylib will perform a few reads at each address, so although thought
not the most efficient solution, it is a way to avoid fatal
errors. Make use of this as a minimal fix for stable to fix the
probing problems.
Follow up patches will rework how C45 operates to make it similar to
C22 which considers -ENODEV as a none-fatal, and swap mv88e6xxx to
using this.
Cc: stable@vger.kernel.org
Fixes: 743a19e38d ("net: dsa: mv88e6xxx: Separate C22 and C45 transactions")
Reported-by: Tim Menninger <tmenninger@purestorage.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240129224948.1531452-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0526ec536 upstream.
In commit ac50476717 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.
This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.
netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.
Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.
This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.
Call trace:
[ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002
[ 654.568030] Call Trace:
[ 654.571221] <TASK>
[ 654.573790] __schedule+0x2d6/0x960
[ 654.577733] schedule+0x69/0xf0
[ 654.581214] schedule_timeout+0x87/0x140
[ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20
[ 654.590291] msleep+0x2d/0x40
[ 654.593625] napi_disable+0x2b/0x80
[ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[ 654.611101] ? do_wait_intr+0xb0/0xb0
[ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc]
[ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]
Cc: stable@vger.kernel.org
Fixes: ac50476717 ("hv_netvsc: Disable NAPI before closing the VMBus channel")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b55984c96 upstream.
Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.
To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.
While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
xenvif_idx_release()'s.
Fixes: 210c34dcd8 ("xen-netback: add support for multicast control")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4896bb7c0b upstream.
With the dma conf being reallocated on each call to stmmac_open(), any
information in there is lost, unless we specifically handle it.
The STMMAC_TBS_EN bit is set when adding an etf qdisc, and the etf qdisc
therefore would stop working when link was set down and then back up.
Fixes: ba39b344e9 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c73729b64b ]
The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs
up to 'pf->hw.func_caps.num_vsis' but this is incorrect because
the real number of VSIs can be up to 'pf->num_alloc_vsi' that
can be higher. Fix this loop.
Fixes: 69129dc39f ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73d9629e1c ]
Currently when PF administratively sets VF's MAC address and the VF
is put down (VF tries to delete all MACs) then the MAC is removed
from MAC filters and primary VF MAC is zeroed.
Do not allow untrusted VF to remove primary MAC when it was set
administratively by PF.
Reproducer:
1) Create VF
2) Set VF interface up
3) Administratively set the VF's MAC
4) Put VF interface down
[root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
[root@host ~]# ip link set enp2s0f0v0 up
[root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
[root@host ~]# ip link set enp2s0f0v0 down
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
Fixes: 700bbf6c1f ("i40e: allow VF to remove any MAC filter")
Fixes: ceb29474bb ("i40e: Add support for VF to specify its primary MAC address")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15faa1f67a ]
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.
Fixes: cabc9d4933 ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b0ed890ac ]
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the
bonding driver does not support XDP and AF_XDP in zero-copy mode even
if the real NIC drivers do.
Note that the driver used to report everything as supported before a
device was bonded. Instead of just masking out the zero-copy support
from this, have the driver report that no XDP feature is supported
until a real device is bonded. This seems to be more truthful as it is
the real drivers that decide what XDP features are supported.
Fixes: cb9e6e584d ("bonding: add xdp_features support")
Reported-by: Prashant Batra <prbatra.mail@gmail.com>
Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65c6ee9045 ]
This is an error path and Smatch complains that "tbl_rev" is uninitialized
on this path. All the other functions follow this same patter where they
set the error code and goto out_free so that's probably what was intended
here as well.
Fixes: e8e10a37c5 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/09900c01-6540-4a32-9451-563da0029cb6@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6ebb5b676 ]
This saves the error as PTR_ERR(wifi_pkg). The problem is that
"wifi_pkg" is a valid pointer, not an error pointer. Set the error code
to -EINVAL instead.
Fixes: 2a8084147b ("iwlwifi: acpi: support reading and storing WRDS revision 1 and 2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/9620bb77-2d7c-4d76-b255-ad824ebf8e35@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ce2654d87 upstream.
DDPP is copied from Synopsys Data book:
DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.
The macro name should be XGMAC_DPP_DISABLE.
Fixes: 46eba193d0 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1692b9775e upstream.
The cited commit introduces and uses the string constants dpp_tx_err and
dpp_rx_err. These are assigned to constant fields of the array
dwxgmac3_error_desc.
It has been reported that on GCC 6 and 7.5.0 this results in warnings
such as:
.../dwxgmac2_core.c:836:20: error: initialiser element is not constant
{ true, "TDPES0", dpp_tx_err },
I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0.
But not GCC 13.2.0.
So it seems this effects older compilers but not newer ones.
As Jon points out in his report, the minimum compiler supported by
the kernel is GCC 5.1, so it does seem that this ought to be fixed.
It is not clear to me what combination of 'const', if any, would address
this problem. So this patch takes of using #defines for the string
constants
Compile tested only.
Fixes: 46eba193d0 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b09b58e31b ]
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.
Fixes: c9c12d339d ("octeontx2-pf: Add support for PTP clock")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f5fb33cf ]
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.
tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.
Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.
Fixes: 3fc2333933 ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bdda0048c ]
After commit e3eac9f32e ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by"), the compiler may enforce
dynamic array indexing of req->channels to stay below n_channels. As a
result, n_channels needs to be increased _before_ accessing the newly
added array index. Increment it first, then use "i" for the prior index.
Solves this warning in the coming GCC that has __counted_by support:
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info':
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req->
n_channels' may be undefined [-Wsequence-point]
3783 | req->channels[req->n_channels++] = chan;
| ~~~~~~~~~~~~~~~^~
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Ian Lin <ian.lin@infineon.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16867c38bc ]
Currently the driver exits eSR by calling
iwl_mvm_esr_mode_inactive() before updating the FW
(by deactivating one of the links), and therefore before
sending the EML frame notifying that we are no longer in eSR.
This is wrong for several reasons:
1. The driver sends SMPS activation frames when we are still in eSR
and SMPS should be disabled when in eSR
2. The driver restores RLC configuration as it was before eSR
entering, and RLC command shouldn't be sent in eSR
Fix this by calling iwl_mvm_esr_mode_inactive() after FW update
Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46eba193d0 ]
Commit 56e58d6c8a ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
Fixes: 56e58d6c8a ("net: stmmac: Implement Safety Features in XGMAC core")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9407ff118 ]
The PCIe reset handlers can run at the same time as the
health thread. This can cause the health thread to
stomp on the PCIe reset. Fix this by preventing the
health thread from running while a PCIe reset is happening.
As part of this use timer_shutdown_sync() during reset and
remove to make sure the timer doesn't ever get rearmed.
Fixes: ffa5585833 ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 486058f42a upstream.
As suggested by Paolo in link[1], if the memory allocation fails, the mm
layer will emit a lot warning comprising the backtrace, so remove the
print.
[1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04f647c8e4 ]
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc90fbe0c3 ]
Currently the teardown/setup flow for driver probe/remove is quite
a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up().
One key piece that's missing are the calls to pci_alloc_irq_vectors()
and pci_free_irq_vectors(). The pcie reset case is calling
pci_free_irq_vectors() on reset_prepare, but not calling the
corresponding pci_alloc_irq_vectors() on reset_done. This is causing
unexpected/unwanted interrupt behavior due to the adminq interrupt
being accidentally put into legacy interrupt mode. Also, the
pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being
called directly in probe/remove respectively.
Fix this inconsistency by making the following changes:
1. Always call pdsc_dev_init() in pdsc_setup(), which calls
pci_alloc_irq_vectors() and get rid of the now unused
pds_dev_reinit().
2. Always free/clear the pdsc->intr_info in pdsc_teardown()
since this structure will get re-alloced in pdsc_setup().
3. Move the calls of pci_free_irq_vectors() to pdsc_teardown()
since pci_alloc_irq_vectors() will always be called in
pdsc_setup()->pdsc_dev_init() for both the probe/remove and
reset flows.
4. Make sure to only create the debugfs "identity" entry when it
doesn't already exist, which it will in the reset case because
it's already been created in the initial call to pdsc_dev_init().
Fixes: ffa5585833 ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e96094c1d1 ]
During reset the BARs might be accessed when they are
unmapped. This can cause unexpected issues, so fix it by
clearing the cached BAR values so they are not accessed
until they are re-mapped.
Also, make sure any places that can access the BARs
when they are NULL are prevented.
Fixes: 49ce92fbee ("pds_core: add FW update feature to devlink")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e82a8745b ]
There are multiple paths that can result in using the pdsc's
adminq.
[1] pdsc_adminq_isr and the resulting work from queue_work(),
i.e. pdsc_work_thread()->pdsc_process_adminq()
[2] pdsc_adminq_post()
When the device goes through reset via PCIe reset and/or
a fw_down/fw_up cycle due to bad PCIe state or bad device
state the adminq is destroyed and recreated.
A NULL pointer dereference can happen if [1] or [2] happens
after the adminq is already destroyed.
In order to fix this, add some further state checks and
implement reference counting for adminq uses. Reference
counting was used because multiple threads can attempt to
access the adminq at the same time via [1] or [2]. Additionally,
multiple clients (i.e. pds-vfio-pci) can be using [2]
at the same time.
The adminq_refcnt is initialized to 1 when the adminq has been
allocated and is ready to use. Users/clients of the adminq
(i.e. [1] and [2]) will increment the refcnt when they are using
the adminq. When the driver goes into a fw_down cycle it will
set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt
to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent
any further adminq_refcnt increments. Waiting for the
adminq_refcnt to hit 1 allows for any current users of the adminq
to finish before the driver frees the adminq. Once the
adminq_refcnt hits 1 the driver clears the refcnt to signify that
the adminq is deleted and cannot be used. On the fw_up cycle the
driver will once again initialize the adminq_refcnt to 1 allowing
the adminq to be used again.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffa5585833 ]
Implement the callbacks for a nice PCI reset. These get called
when a user is nice enough to use the sysfs PCI reset entry, e.g.
echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7e82a8745b ("pds_core: Prevent race issues involving the adminq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 951705151e ]
The initial design for the adminq interrupt was done based
on client drivers having their own adminq and adminq
interrupt. So, each client driver's adminq isr would use
their specific adminqcq for the private data struct. For the
time being the design has changed to only use a single
adminq for all clients. So, instead use the struct pdsc for
the private data to simplify things a bit.
This also has the benefit of not dereferencing the adminqcq
to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit
is set and the adminqcq has actually been cleared/freed.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d321067e2c ]
There is a small window where pdsc_work_thread()
calls pdsc_process_adminq() and pdsc_process_adminq()
passes the PDSC_S_STOPPING_DRIVER check and starts
to process adminq/notifyq work and then the driver
starts a fw_down cycle. This could cause some
undefined behavior if the notifyqcq/adminqcq are
free'd while pdsc_process_adminq() is running. Use
cancel_work_sync() on the adminqcq's work struct
to make sure any pending work items are cancelled
and any in progress work items are completed.
Also, make sure to not call cancel_work_sync() if
the work item has not be initialized. Without this,
traces will happen in cases where a reset fails and
teardown is called again or if reset fails and the
driver is removed.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
