commit 5acdc432f8 upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 0bb4e9187e ("mt76: mt7615: fix hwmon temp sensor mem use-after-free")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a71ed5898d upstream.
"iw dev wlp2s0 station dump" shows incorrect rx bitrate:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1
This is because the RX band width is calculated incorrectly. Fix the
calculation according to the phydm_rxsc_2_bw() function from the
official drivers.
After:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1
It also works correctly with the AP configured for 20 MHz and 40 MHz.
Tested with RTL8822CE.
Cc: stable@vger.kernel.org
Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af8cd2822 upstream.
Remove VID/PID 0bda:c82c as it was inadvertently added to the device
list in driver rtw8821cu. This VID/PID is for the rtw8822cu device
and it is already in the appropriate place for that device.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/335d7fa1-0ba5-4b86-bba5-f98834ace1f8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f503ae90c7 upstream.
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he
routine adding an sta interface to the mt7996 driver.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240813081242.3991814-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 267efeda8c upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7e ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ccc9e476c upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7e ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04e906839a upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa2e484b3 upstream.
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <stable@vger.kernel.org> # 6.6.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75b3189540 upstream.
Remove the CAN_CTRLMODE_3_SAMPLES announcement for CAN-USB/3-FD devices
because these devices don't support it.
The hardware has a Microchip SAM E70 microcontroller that uses a Bosch
MCAN IP core as CAN FD controller. But this MCAN core doesn't support
triple sampling.
Fixes: 80662d9430 ("can: esd_usb: Add support for esd CAN-USB/3")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240904222740.2985864-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 69197dfc64.
commit 937d46ecc5 ("net: wangxun: add ethtool_ops for
channel number") changed NIC misc irq from most significant
bit to least significant bit, the former condition is not
required to apply this patch, because we only need to set
irq affinity for NIC queue irq vectors.
this patch is required after commit 937d46ecc5 ("net: wangxun:
add ethtool_ops for channel number") was applied, so this is only
relevant to 6.6.y branch.
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b514c47ebf ]
Commit 5fabb01207 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.
When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().
After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.
Fixes: 5fabb01207 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c11a49d58a ]
Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.
That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.
This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.
Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.
Fixes: 295525e29a ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cbfd45fbc ]
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx
Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5109b60ee ]
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Fixes: 6fd9c53f71 ("net: seeq: Convert timers to use timer_setup()")
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a6caa2cfa ]
axienet_free_tx_chain returns the number of DMA descriptors it's
handled. However, axienet_tx_poll treats the return as the number of
packets. When scatter-gather SKBs are enabled, a single packet may use
multiple DMA descriptors, which causes incorrect packet counts. Fix this
by explicitly keepting track of the number of packets processed as
separate from the DMA descriptors.
Budget does not affect the number of Tx completions we can process for
NAPI, so we use the ring size as the limit instead of budget. As we no
longer return the number of descriptors processed to axienet_tx_poll, we
now update tx_bd_ci in axienet_free_tx_chain.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba0da2dc93 ]
As advised by Documentation/networking/napi.rst, masking IRQs after
calling napi_schedule can be racy. Avoid this by only masking/scheduling
if napi_schedule_prep returns true.
Fixes: 9e2bc267e7 ("net: axienet: Use NAPI for TX completion path")
Fixes: cc37610caa ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240913145711.2284295-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c7ac4fe2 ]
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f590 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 799a922599 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c471236b23 ]
Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner
IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore
we need to ensure that the inner IP header is part of the skb's linear
data.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fa29c851 ]
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f778941913 ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c09b50efc ]
After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.
To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801ad2f87b ]
If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e.g. due to CAN bus traffic before initializing the
device, when m_can_start() is called and interrupts are enabled,
m_can_isr() is called immediately, which disables all CAN interrupts
and calls napi_schedule().
Because napi_enable() isn't called until later in m_can_open(), the
call to napi_schedule() never schedules the m_can_poll() callback and
the device is left with interrupts disabled and can't receive any CAN
packets until rebooted.
This can be verified by running "cansend" from another device before
setting the bitrate and calling "ip link set up can0" on the test
device. Adding debug lines to m_can_isr() shows it's called with flags
(IR_EP | IR_EW | IR_CRCE), which calls m_can_disable_all_interrupts()
and napi_schedule(), and then m_can_poll() is never called.
Move the call to napi_enable() above the call to m_can_start() to
enable any initial interrupt flags to be handled by m_can_poll() so
that interrupts are reenabled. Add a call to napi_disable() in the
error handling section of m_can_open(), to handle the case where later
functions return errors.
Also, in m_can_close(), move the call to napi_disable() below the call
to m_can_stop() to ensure all interrupts are handled when bringing
down the device. This race condition is much less likely to occur.
Tested on a Microchip SAMA7G54 MPU. The fix should be applicable to
any SoC with a Bosch M_CAN controller.
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-1-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7c6ae1ef ]
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d197d3780 ]
If TLV includes beacon content, its length might not be 4-byte aligned.
Make sure the length is aligned before sending beacon commands to FW.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 9e461f4a23 ("wifi: mt76: mt7996: fix uninitialized TLV data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9265397caa ]
According to connac3 HW design, the WMM index of AP and STA interface
should be 0 and 3, respectively.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 376200f095 ]
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to
properly stop and resume MAC TX queue. Without this tag, HW needs more time
to resume traffic when switching back to working channel.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f98c3de92b ]
The chainmask is u16 so using hweight8 cannot get correct tx_ant.
Without this patch, the tx_ant of band 2 would be -1 and lead to the
following issue:
BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e]
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a7ee94559 ]
The algo running in fw may take a little longer than 5 milliseconds,
(e.g. measurement on 80MHz while associated). Increase the minimum
time between measurements to 7 milliseconds.
Fixes: 830aa3e7d1 ("iwlwifi: mvm: add support for range request command version 13")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8131dd5281 ]
The 'gl' devices are in the bz family, but they're not,
integrated, so should have their own trans config struct.
Fix that, also necessitating the removal of LTR config,
and while at it remove 0x2727 and 0x272D IDs that were
only used for test chips.
Fixes: c30a2a6478 ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6adae0b081 ]
LNL is the codename for the upcoming Series 2 Core Ultra
processors designed by Intel. AX101, AX201 and AX203 devices
are not shiped on LNL platforms, so don't support them.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240613171043.f24a228dfd96.I989a2d3f1513211bc49ac8143ee4e9e341e1ee67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 8131dd5281 ("wifi: iwlwifi: config: label 'gl' devices as discrete")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c977327d ]
In 'rtw_coex_action_bt_a2dp_pan', 'wl_cpt_test' and 'bt_cpt_test' are
hardcoded to false, so corresponding 'table_case' and 'tdma_case'
assignments are never met.
Also 'rtw_coex_set_rf_para(rtwdev, chip->wl_rf_para_rx[1])' is never
executed. Assuming that CPT was never fully implemented, remove
lookalike leftovers. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 76f631cb40 ("rtw88: coex: update the mechanism for A2DP + PAN")
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809085310.10512-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c70f316368 ]
Reference and PTP clocks rate of the Loongson GMAC devices is 125MHz.
(So is in the GNET devices which support is about to be added.) Set
the respective plat_stmmacenet_data field up in accordance with that
so to have the coalesce command and timestamping work correctly.
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a66de2d0f2 ]
Currently ampdu_factor is wrongly calculated in ath12k_peer_assoc_h_he(), fix it.
This is found during code review.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240710021819.87216-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd98d54db2 ]
struct wmi_pdev_bss_chan_info_event is not similar to the firmware
struct definition, this will cause some random failures.
Fix by matching the struct wmi_pdev_bss_chan_info_event with the
firmware structure definition.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-3-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59529c982f ]
Currently, the firmware returns incorrect pdev_id information in
WMI_PDEV_BSS_CHAN_INFO_EVENTID, leading to incorrect filling of
the pdev's survey information.
To prevent this issue, when requesting BSS channel information
through WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, firmware expects
pdev_id as one of the arguments in this WMI command.
Add pdev_id to the struct wmi_pdev_bss_chan_info_req_cmd and fill it
during ath12k_wmi_pdev_bss_chan_info_request(). This resolves the
issue of sending the correct pdev_id in WMI_PDEV_BSS_CHAN_INFO_EVENTID.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-2-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ffe7f018 ]
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6002b6c05 ]
When the firmware interface layer was refactored it provided various
"get" and "set" functions. For the "get" in some cases a parameter
needed to be passed down to firmware as a key indicating what to
"get" turning the output parameter of the "get" function into an
input parameter as well. To accommodate this the "get" function blindly
copies the parameter which in some places resulted in an uninitialized
warnings from the compiler. These have been fixed by initializing the
input parameter in the past. Recently another batch of similar fixes
were submitted to address clang static checker warnings [1].
Proposing another solution by introducing a "query" variant which is used
when the (input) parameter is needed by firmware. The "get" variant will
only fill the (output) parameter with the result received from firmware
taking care of proper endianess conversion.
[1] https://lore.kernel.org/all/20240702122450.2213833-1-suhui@nfschina.com/
Fixes: 81f5dcb808 ("brcmfmac: refactor firmware interface layer.")
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240727185617.253210-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31343230ab ]
With multi-vendor support the vendor-specific module may need to use
the firmware interface functions so export them using the macro
BRCMF_EXPORT_SYMBOL_GPL() which exports them to driver namespace.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103095704.135651-2-arend.vanspriel@broadcom.com
Stable-dep-of: c6002b6c05 ("wifi: brcmfmac: introducing fwil query functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e735a4c61 ]
In 'rtw_wait_firmware_completion()', always wait for both (regular and
wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()'
has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue
'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually
the wowlan one) is still in progress, causing UAF detected by KASAN.
Fixes: c8e5695eae ("rtw88: load wowlan firmware if wowlan is supported")
Reported-by: syzbot+6c6c08700f9480c41fe3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6c6c08700f9480c41fe3
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240726114657.25396-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7801540f3 upstream.
The mcp251xfd wakes up from Low Power or Sleep Mode when SPI activity
is detected. To avoid this, make sure that the timestamp worker is
stopped before shutting down the chip.
Split the starting of the timestamp worker out of
mcp251xfd_timestamp_init() into the separate function
mcp251xfd_timestamp_start().
Call mcp251xfd_timestamp_init() before mcp251xfd_chip_start(), move
mcp251xfd_timestamp_start() to mcp251xfd_chip_start(). In this way,
mcp251xfd_timestamp_stop() can be called unconditionally by
mcp251xfd_chip_stop().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51b2a72161 upstream.
To fix the coding style, remove the whitespace in front of labels.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac2b81eb8b ]
When changing the interface from CAN-CC to CAN-FD mode the old
coalescing parameters are re-used. This might cause problem, as the
configured parameters are too big for CAN-FD mode.
During testing an invalid TX coalescing configuration has been seen.
The problem should be been fixed in the previous patch, but add a
safeguard here to ensure that the number of TEF coalescing buffers (if
configured) is exactly the half of all TEF buffers.
Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 094513f8a2 ]
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
