[ Upstream commit 05ef7055de ]
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa ("netfilter: nft_fib: Fix for rpath check with VRF devices")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc56878ca1 ]
If CONFIG_BRIDGE_NETFILTER is not enabled, which is the case for x86_64
defconfig, then building nf_reject_ipv4.c and nf_reject_ipv6.c with W=1
using gcc-14 results in the following warnings, which are treated as
errors:
net/ipv4/netfilter/nf_reject_ipv4.c: In function 'nf_send_reset':
net/ipv4/netfilter/nf_reject_ipv4.c:243:23: error: variable 'niph' set but not used [-Werror=unused-but-set-variable]
243 | struct iphdr *niph;
| ^~~~
cc1: all warnings being treated as errors
net/ipv6/netfilter/nf_reject_ipv6.c: In function 'nf_send_reset6':
net/ipv6/netfilter/nf_reject_ipv6.c:286:25: error: variable 'ip6h' set but not used [-Werror=unused-but-set-variable]
286 | struct ipv6hdr *ip6h;
| ^~~~
cc1: all warnings being treated as errors
Address this by reducing the scope of these local variables to where
they are used, which is code only compiled when CONFIG_BRIDGE_NETFILTER
enabled.
Compile tested and run through netfilter selftests.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/netfilter-devel/20240906145513.567781-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c2bd38b95 upstream.
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 93c21077bb ]
The rpl sr tunnel code contains calls to dst_cache_*() which are
only present when the dst cache is built.
Select DST_CACHE to build the dst cache, similar to other kconfig
options in the same file.
Compiling the rpl sr tunnel without DST_CACHE will lead to linker
errors.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c84b0aa28 ]
Free the skb before returning from rpl_input when skb_cow_head() fails.
Use a "drop" label and goto instructions.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61e2bbafb0 ]
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5ff7e339 ]
If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.
We must use rcu_read_lock() to prevent a possible UAF.
Fixes: 0c9f227bee ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da273b377a ]
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.
Fixes: 5796015fa9 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3e33fcc3 ]
GRO code checks for matching layer 2 headers to see, if packet belongs
to the same flow and because ip6 tunnel set dev->hard_header_len
this check fails in cases, where it shouldn't. To fix this don't
set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c
does.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1eeb504357 ]
We lost ability to unload ipv6 module a long time ago.
Instead of calling expensive inet_twsk_purge() twice,
we can handle all families in one round.
Also remove an extra line added in my prior patch,
per Kuniyuki Iwashima feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240327192934.6843-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240329153203.345203-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 565d121b69 ("tcp: prevent concurrent execution of tcp_sk_exit_batch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd740b985 ]
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 252442f2ae upstream.
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a46c68debf ]
The current logic only works if the PIO is between two
other ND user options. This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).
side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Patrick Rohr <prohr@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 048c796beb ("ipv6: adjust ndisc_is_useropt() to also return true for PIO")
Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c22921df77 ]
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit abb9a68d2c upstream.
When the source address is selected, the scope must be checked. For
example, if a loopback address is assigned to the vrf device, it must not
be chosen for packets sent outside.
CC: stable@vger.kernel.org
Fixes: afbac6010a ("net: ipv6: Address selection needs to consider L3 domains")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240710081521.3809742-4-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fde6f897f2 ]
These functions have races when they:
1) Write sk->sk_err
2) call sk_error_report(sk)
3) call tcp_done(sk)
As described in prior patches in this series:
An smp_wmb() is missing.
We should call tcp_done() before sk_error_report(sk)
to have consistent tcp_poll() results on SMP hosts.
Use tcp_done_with_error() where we centralized the
correct sequence.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96f887a612 ]
xmit() functions should consume skb or return error codes in error
paths.
When the configuration "CONFIG_INET_ESPINTCP" is not set, the
implementation of the function "esp_output_tail_tcp" violates this rule.
The function frees the skb and returns the error code.
This change removes the kfree_skb from both functions, for both
esp4 and esp6.
WARN_ON is added because esp_output_tail_tcp() should never be called if
CONFIG_INET_ESPINTCP is not set.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf28ff8e4c ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db0090c6eb ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in rpl_input().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14a20e5b4a ]
The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.
A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.
Fix the problem by switching the order of the two operations.
Fixes: 4990509f19 ("[NETNS][IPV6]: Make sysctls route per namespace.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37fe4255a ]
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b98ac1cc ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in seg6_output_core() is not good enough,
because seg6_output_core() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter seg6_output_core()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in seg6_input_core().
Fixes: fa79581ea6 ("ipv6: sr: fix several BUGs when preemption is enabled")
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <dlebrun@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe40483ec ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in ioam6_output() is not good enough,
because ioam6_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter ioam6_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Fixes: 8cb3bf8bff ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 92f1655aa2 upstream.
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48e ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Lee: Stable backport]
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb48727238 upstream.
Problem
=========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
we noticed that the logic of assigning the default value of fc_metirc
changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT,
rt) with a non-zero metric to add a route, then they may fail to delete a
route with passing in a metric value of 0 to the kernel by ioctl(fd,
SIOCDELRT, rt). But iproute can succeed in deleting it.
As a reference, when using iproute tools by netlink to delete routes with
a metric parameter equals 0, like the command as follows:
ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0
the user can still succeed in deleting the route entry with the smallest
metric.
Root Reason
===========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config()
will set a defalut value (1024) to cfg->fc_metric in kernel, and in
ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by
if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric)
continue;
and the condition is true and skip the later procedure (deleting route)
because cfg->fc_metric != rt->fib6_metric. But before that commit,
cfg->fc_metric is still zero there, so the condition is false and it
will do the following procedure (deleting).
Solution
========
In order to keep a consistent behaviour across netlink() and ioctl(), we
should allow to delete a route with a metric value of 0. So we only do
the default setting of fc_metric in route adding.
CC: stable@vger.kernel.org # 5.4+
Fixes: 67f6951347 ("ipv6: Move setting default metric for routes")
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efb9f4f19f ]
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5447f9708d ]
The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.
This issue was introduced in commit af3b5158b8 ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0de3 ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.
The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails.
Fixes: af3b5158b8 ("ipv6: sr: fix BUG due to headroom too small after SRH push")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160e9d2752 ]
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.
This issue exist since commit 46738b1317 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5 ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path.
Fixes: 46738b1317 ("ipv6: sr: add option to control lwtunnel support")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e370a771d ]
Commit 5559cea2d5 ("ipv6: sr: fix possible use-after-free and
null-ptr-deref") changed the register order in seg6_init(). But the
unregister order in seg6_exit() is not updated.
Fixes: 5559cea2d5 ("ipv6: sr: fix possible use-after-free and null-ptr-deref")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3321687e32 ]
Currently, we only call seg6_local_exit() in seg6_init() if
seg6_local_init() failed. But forgot to call it in seg6_exit().
Fixes: d1df6fd8a1 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cd354fe1e ]
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50aee97d15 ]
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bf ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1743852.66(0.0208) 1725933.02(0.0167) 1705203.78(0.0386)
patched 1968727.61(0.0035) 1962283.22(0.0195) 1923853.50(0.0256)
ipv6:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1729020.03(0.0028) 1691704.49(0.0243) 1692251.34(0.0083)
patched 1900422.19(0.0067) 1900968.01(0.0067) 1568532.72(0.1519)
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
mitigations=off ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 3230279.97(0.0066) 3229320.91(0.0060) 2605693.19(0.0697)
patched 3242802.36(0.0073) 3239310.71(0.0035) 2502427.19(0.0882)
Cc: Lorenz Bauer <lmb@isovalent.com>
Fixes: f0ea27e7bf ("udp: re-score reuseport groups when connected sockets are present")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d289ab65b8 ]
disable_ipv6 is read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
v2: do not preload net before rtnl_trylock() in
addrconf_disable_ipv6() (Jiri)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 4db783d68b ("ipv6: prevent NULL dereference in ip6_output()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 004d138364 ]
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 4893b8b3ef ("hsr: Simplify code for announcing HSR nodes timer setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e13d3a9c2 ]
As it was done in commit fc1092f515 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388bae ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbfecab9 ]
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ef31ea5d0 ]
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ff ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
