[ Upstream commit e64285ff41 ]
Since '1 << rocker_port->pport' may be undefined for port >= 32,
cast the left operand to 'unsigned long long' like it's done in
'rocker_port_set_enable()' above. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20241114151946.519047-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 078e0d596f ]
qca8k_phy_eth_command() is used to probe the child MDIO bus while the
parent MDIO is locked. This causes lockdep splat, reporting a possible
deadlock. It is not an actually deadlock, because different locks are
used. By making use of mutex_lock_nested() we can avoid this false
positive.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241110175955.3053664-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857282b819 ]
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.
The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.
Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fa4f049dc ]
This patch fixes incorrect code alignment.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aacd14844 ]
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba9 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem.
Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com>
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd50c4125c ]
Cell-index value is obtained from Device Tree and then used to calculate
the index for accessing arrays port_mfl[], mac_mfl[] and intr_mng[].
In case of broken DT due to any error cell-index can contain any value
and it is possible to go beyond the array boundaries which can lead
at least to memory corruption.
Validate cell-index value obtained from Device Tree.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20241028065824.15452-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d10f1a4e44 ]
Currently reset state configuration of split header works fine for
non-tagged packets and we see no corruption in payload of any size
We need additional programming sequence with reset configuration to
handle VLAN tagged packets to avoid corruption in payload for packets
of size greater than 256 bytes.
Without this change ping application complains about corruption
in payload when the size of the VLAN packet exceeds 256 bytes.
With this change tagged and non-tagged packets of any size works fine
and there is no corruption seen.
Current configuration which has the issue for VLAN packet
----------------------------------------------------------
Split happens at the position at Layer 3 header
|MAC-DA|MAC-SA|Vlan Tag|Ether type|IP header|IP data|Rest of the payload|
2 bytes ^
|
With the fix we are making sure that the split happens now at
Layer 2 which is end of ethernet header and start of IP payload
Ip traffic split
-----------------
Bits which take care of this are SPLM and SPLOFST
SPLM = Split mode is set to Layer 2
SPLOFST = These bits indicate the value of offset from the beginning
of Length/Type field at which header split should take place when the
appropriate SPLM is selected. Reset value is 2bytes.
Un-tagged data (without VLAN)
|MAC-DA|MAC-SA|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Tagged data (with VLAN)
|MAC-DA|MAC-SA|VLAN Tag|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Non-IP traffic split such AV packet
------------------------------------
Bits which take care of this are
SAVE = Split AV Enable
SAVO = Split AV Offset, similar to SPLOFST but this is for AVTP
packets.
|Preamble|MAC-DA|MAC-SA|VLAN tag|Ether type|IEEE 1722 payload|CRC|
2bytes ^
|
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016234313.3992214-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ced9bb90 ]
Arcadyan made routers with this PCI ID containing an AR2417.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240930180716.139894-3-rosenp@gmail.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da04740124 ]
This is in two devices made by Gigaset, SX762 and SX763.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240930180716.139894-2-rosenp@gmail.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fe45fada ]
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c: In function 'fs_mii_bitbang_init':
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:126:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
126 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-2-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020bfdc4ed ]
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c: In function 'mpc52xx_fec_mdio_probe':
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c:97:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
97 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-1-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87e26448db ]
Vendor drivers r8125/r8126 indicate that this quirk isn't needed
any longer for RTL8126A. Mimic this in r8169.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d1317187-aa81-4a69-b831-678436e4de62@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630d5d8f2b ]
The return value of ieee80211_probereq_get() might be NULL, so check it
before using to avoid NULL pointer access.
Addresses-Coverity-ID: 1529805 ("Dereference null return value")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 30447a1bc0 upstream.
Commit b8e0ddd36c ("can: mcp251xfd: tef: prepare to workaround
broken TEF FIFO tail index erratum") introduced
mcp251xfd_get_tef_len() to get the number of unhandled transmit events
from the Transmit Event FIFO (TEF).
As the TEF has no head index, the driver uses the TX-FIFO's tail index
instead, assuming that send frames are completed.
When calculating the number of unhandled TEF events, that commit
didn't take mcp2518fd erratum DS80000789E 6. into account. According
to that erratum, the FIFOCI bits of a FIFOSTA register, here the
TX-FIFO tail index might be corrupted.
However here it seems the bit indicating that the TX-FIFO is
empty (MCP251XFD_REG_FIFOSTA_TFERFFIF) is not correct while the
TX-FIFO tail index is.
Assume that the TX-FIFO is indeed empty if:
- Chip's head and tail index are equal (len == 0).
- The TX-FIFO is less than half full.
(The TX-FIFO empty case has already been checked at the
beginning of this function.)
- No free buffers in the TX ring.
If the TX-FIFO is assumed to be empty, assume that the TEF is full and
return the number of elements in the TX-FIFO (which equals the number
of TEF elements).
If these assumptions are false, the driver might read to many objects
from the TEF. mcp251xfd_handle_tefif_one() checks the sequence numbers
and will refuse to process old events.
Reported-by: Renjaya Raga Zenta <renjaya.zenta@formulatrix.com>
Closes: https://patch.msgid.link/CAJ7t6HgaeQ3a_OtfszezU=zB-FqiZXqrnATJ3UujNoQJJf7GgA@mail.gmail.com
Fixes: b8e0ddd36c ("can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum")
Tested-by: Renjaya Raga Zenta <renjaya.zenta@formulatrix.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241126-mcp251xfd-fix-length-calculation-v2-1-c2ed516ed6ba@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee1dfbdd8b upstream.
In commit 6e86a1543c ("can: dev: provide optional GPIO based
termination support") GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the
GPIO. This leads to the following warning, if the systems uses a
sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c
| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the
use of sleeping GPIOs.
Cc: Nicolai Buchwitz <nb@tipi-net.de>
Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: stable@vger.kernel.org
Reported-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Tested-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Fixes: 6e86a1543c ("can: dev: provide optional GPIO based termination support")
Link: https://patch.msgid.link/20241121-dev-fix-can_set_termination-v1-1-41fa6e29216d@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5085f861b4 ]
Previously a workaround was added to avoid syndrome 0xcdb051. It is
triggered when offload a rule with tunnel encapsulation, and
forwarding to another table, but not matching on the internal port in
firmware steering mode. The original workaround skips internal tunnel
port logic, which is not correct as not all cases are considered. As
an example, if vlan is configured on the uplink port, traffic can't
pass because vlan header is not added with this workaround. Besides,
there is no such issue for software steering. So, this patch removes
that, and returns error directly if trying to offload such rule for
firmware steering.
Fixes: 06b4eac9c4 ("net/mlx5e: Don't offload internal port if filter device is out device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Tested-by: Frode Nordahl <frode.nordahl@canonical.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 217bbf156f ]
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Fixes: 07ff135958 ("mlxsw: Introduce flex key elements for Spectrum-4")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/35e72c97bdd3bc414fb8e4d747e5fb5d26c29658.1733237440.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec2a32145 ]
'struct mlxsw_afk_element_inst' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security.
Update a few functions and struct mlxsw_afk_block accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4278 4032 0 8310 2076 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_flex_keys.o
After:
=====
text data bss dec hex filename
7934 352 0 8286 205e drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_flex_keys.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8ccfc7bfb2365dcee5b03c81ebe061a927d6da2e.1727541677.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 217bbf156f ("mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cad6431b86 ]
For 12 key blocks in the A-TCAM, rules are split into two records, which
constitute two lookups. The two records are linked using a
"large entry key ID".
Due to a Spectrum-4 hardware issue, KVD entries that correspond to key
blocks 0 to 5 of 12 key blocks A-TCAM entries will be placed in the same
KVD pipe if they only differ in their "large entry key ID", as it is
ignored. This results in a reduced scale. To reduce the probability of this
issue, we can place key blocks with high entropy in blocks 0 to 5. The idea
is to place blocks that are changed often in blocks 0 to 5, for
example, key blocks that match on IPv4 addresses or the LSBs of IPv6
addresses. Such placement will reduce the probability of these blocks to be
same.
Mark several blocks with 'high_entropy' flag, so later we will take into
account this flag and place them in blocks 0 to 5.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 217bbf156f ("mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92953e7aab ]
Two ACL regions that are configured by the driver during initialization are
the ones used for IPv4 and IPv6 multicast forwarding. Entries residing
in these two regions match on the {SIP, DIP, VRID} key elements.
Currently for IPv6 region, 9 key blocks are used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 4 for DIP - 'ipv4_0', 'ipv6_{0,1,2/2b}'
* 1 for VRID - 'ipv4_4b'
This can be improved by reducing the amount key blocks needed for
the IPv6 region to 8. It is possible to use key blocks that mix subsets of
the VRID element with subsets of the DIP element.
The following key blocks can be used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 1 for subset of DIP - 'ipv4_0'
* 3 for the rest of DIP and subsets of VRID - 'ipv6_{0,1,2/2b}'
To make this happen, add VRID sub-elements as part of existing keys -
'ipv6_{0,1,2/2b}'. Note that one of the sub-elements is called
VRID_ROUTER_MSB and does not contain bit numbers like the rest, as for
Spectrum < 4 this element represents bits 8-10 and for Spectrum-4 it
represents bits 8-11.
Breaking VRID into 3 sub-elements makes the driver use one less block in
IPv6 region for multicast forwarding. The sub-elements can be filled in
blocks that are used for destination IP.
The algorithm in the driver that chooses which key blocks will be used is
lazy and not the optimal one. It searches the block that contains the most
elements that are required, chooses it, removes the elements that appear
in the chosen block and starts again searching the block that contains the
most elements.
When key block 'ipv4_4' is defined, the algorithm might choose it, as it
contains 2 sub-elements of VRID, then 8 blocks must be chosen for SIP and
DIP and we get 9 blocks to match on {SIP, DIP, VRID}. That is why we had to
remove key block 'ipv4_4' in a previous patch and use key block that
contains one field for VRID.
This improvement was tested and indeed 8 blocks are used instead of 9.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 217bbf156f ("mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6caabdf3e ]
The previous patch replaced the key block 'ipv4_4' with 'ipv4_5'. The
corresponding block for Spectrum-4 is 'ipv4_4b'. To be consistent, replace
key block 'ipv4_4b' with 'ipv4_5b'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 217bbf156f ("mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2f3e10ac4 ]
Currently virtual router ID element is broken to two sub-elements -
'VIRT_ROUTER_LSB' and 'VIRT_ROUTER_MSB'. It was broken as this field is
broken in 'ipv4_4' flex key which is used for IPv4 in Spectrum < 4.
For Spectrum-4, we use 'ipv4_4b' flex key which contains one field for
virtual router, this key is not supported in older ASICs.
Add 'ipv4_5' flex key which is supported in all ASICs and contains one
field for virtual router. Then there is no reason to use 'VIRT_ROUTER_LSB'
and 'VIRT_ROUTER_MSB', remove them and add one element 'VIRT_ROUTER' for
this field.
The motivation is to get rid of 'ipv4_4' flex key, as it might be chosen
for IPv6 multicast forwarding region. This will not allow the improvement
in a following patch. See more details in the cover letter and in a
following patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 217bbf156f ("mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0566f83d20 ]
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a ("igb: Fix DCA errors and do not use context index for 82576")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15915b43a7 ]
The ixgbe PF driver logs an info message when a VF attempts to negotiate an
API version which it does not support:
VF 0 requested invalid api version 6
The ixgbevf driver attempts to load with mailbox API v1.5, which is
required for best compatibility with other hosts such as the ESX VMWare PF.
The Linux PF only supports API v1.4, and does not currently have support
for the v1.5 API.
The logged message can confuse users, as the v1.5 API is valid, but just
happens to not currently be supported by the Linux PF.
Downgrade the info message to a debug message, and fix the language to
use 'unsupported' instead of 'invalid' to improve message clarity.
Long term, we should investigate whether the improvements in the v1.5 API
make sense for the Linux PF, and if so implement them properly. This may
require yet another API version to resolve issues with negotiating IPSEC
offload support.
Fixes: 339f289641 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reported-by: Yifei Liu <yifei.l.liu@oracle.com>
Link: https://lore.kernel.org/intel-wired-lan/20240301235837.3741422-1-yifei.l.liu@oracle.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0725312ad ]
Commit 339f289641 ("ixgbevf: Add support for new mailbox communication
between PF and VF") added support for v1.5 of the PF to VF mailbox
communication API. This commit mistakenly enabled IPSEC offload for API
v1.5.
No implementation of the v1.5 API has support for IPSEC offload. This
offload is only supported by the Linux PF as mailbox API v1.4. In fact, the
v1.5 API is not implemented in any Linux PF.
Attempting to enable IPSEC offload on a PF which supports v1.5 API will not
work. Only the Linux upstream ixgbe and ixgbevf support IPSEC offload, and
only as part of the v1.4 API.
Fix the ixgbevf Linux driver to stop attempting IPSEC offload when
the mailbox API does not support it.
The existing API design choice makes it difficult to support future API
versions, as other non-Linux hosts do not implement IPSEC offload. If we
add support for v1.5 to the Linux PF, then we lose support for IPSEC
offload.
A full solution likely requires a new mailbox API with a proper negotiation
to check that IPSEC is actually supported by the host.
Fixes: 339f289641 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a0ea70da5 ]
Commit 43645ce03e ("qed: Populate nvm image attribute shadow.")
added support for populating flash image attributes, notably
"num_images". However, some cards were not able to return this
information. In such cases, the driver would return EINVAL, causing the
driver to exit.
Add check to return EOPNOTSUPP instead of EINVAL when the card is not
able to return these information. The caller function already handles
EOPNOTSUPP without error.
Fixes: 43645ce03e ("qed: Populate nvm image attribute shadow.")
Co-developed-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Florian Forestier <florian@forestier.re>
Signed-off-by: Louis Leseur <louis.leseur@gmail.com>
Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2420b8c81 ]
Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure
MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()
to configure preemptible TCs. However, only PF is able to configure
preemptible TCs. Because only PF has related registers, while VF does not
have these registers. So for VF, its hw->port pointer is NULL. Therefore,
VF will access an invalid pointer when accessing a non-existent register,
which will cause a crash issue. The simplified log is as follows.
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
In addition, some PFs also do not support configuring preemptible TCs,
such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs,
but we should prevent these PFs from accessing these unimplemented
registers.
Fixes: 827145392a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b916540c ]
The f81604_handle_can_bus_errors() function only incremented the receive
error counter and never the transmit error counter, even if the ECC_DIR
flag reported that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
ECC_DIR flag.
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-13-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72a7e2e74b ]
The ems_usb_rx_err() function only incremented the receive error counter
and never the transmit error counter, even if the ECC_DIR flag reported
that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
ECC_DIR flag.
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-12-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 595a81988a ]
The sun4i_can_err() function only incremented the receive error counter
and never the transmit error counter, even if the STA_ERR_DIR flag
reported that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
STA_ERR_DIR flag.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-11-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c4ef3af4b ]
The sja1000_err() function only incremented the receive error counter
and never the transmit error counter, even if the ECC_DIR flag reported
that an error had occurred during transmission.
Increment the receive/transmit error counter based on the value of the
ECC_DIR flag.
Fixes: 429da1cc84 ("can: Driver for the SJA1000 CAN controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-10-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e46459316 ]
The hi3110_can_ist() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission.
The fix the issue by incrementing the appropriate counter based on the
type of error.
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb03d568bb ]
The ifi_canfd_handle_lec_err() function was incorrectly incrementing only
the receive error counter, even in cases of bit or acknowledgment errors
that occur during transmission.
Fix the issue by incrementing the appropriate counter based on the
type of error.
Fixes: 5bbd655a8b ("can: ifi: Add more detailed error reporting")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241122221650.633981-8-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 988d4222bf ]
The m_can_handle_lec_err() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission.
Fix the issue by incrementing the appropriate counter based on the
type of error.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad86d377e ]
The commit a22bd630cf ("can: hi311x: do not report txerr and rxerr
during bus-off") removed the reporting of rxerr and txerr even in case
of correct operation (i. e. not bus-off).
The error count information added to the CAN frame after netif_rx() is
a potential use after free, since there is no guarantee that the skb
is in the same state. It might be freed or reused.
Fix the issue by postponing the netif_rx() call in case of txerr and
rxerr reporting.
Fixes: a22bd630cf ("can: hi311x: do not report txerr and rxerr during bus-off")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee6bf3677a ]
Call the function can_change_state() if the allocation of the skb
fails, as it handles the cf parameter when it is null.
Additionally, this ensures that the statistics related to state error
counters (i. e. warning, passive, and bus-off) are updated.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 889b2ae913 ]
There is an approach made to implement gs_usb firmware/driver based on
Zephyr RTOS. It was found that USB stack of Zephyr RTOS overwrites USB
EP addresses, if they have different last 4 bytes in absence of other
endpoints.
For example in case of gs_usb candlelight firmware EP-IN is 0x81 and
EP-OUT 0x02. If there are no additional USB endpoints, Zephyr RTOS will
overwrite EP-OUT to 0x01. More information can be found in the
discussion with Zephyr RTOS USB stack maintainer here:
https://github.com/zephyrproject-rtos/zephyr/issues/67812
There are already two different gs_usb FW driver implementations based
on Zephyr RTOS:
1. https://github.com/CANnectivity/cannectivity
(by: https://github.com/henrikbrixandersen)
2. https://github.com/zephyrproject-rtos/zephyr/compare/main...KozhinovAlexander:zephyr:gs_usb
(by: https://github.com/KozhinovAlexander)
At the moment both Zephyr RTOS implementations use dummy USB endpoint,
to overcome described USB stack behavior from Zephyr itself. Since
Zephyr RTOS is intended to be used on microcontrollers with very
constrained amount of resources (ROM, RAM) and additional endpoint
requires memory, it is more convenient to update the gs_usb driver in
the Linux kernel.
To fix this problem, update the gs_usb driver from using hard coded
endpoint numbers to evaluate the endpoint descriptors and use the
endpoints provided there.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
Link: https://patch.msgid.link/20241018212450.31746-1-ak.alexander.kozhinov@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69e2326a21 ]
Add support for the Xylanta SAINT3 product family.
Cc: Andy Jackson <andy@xylanta.com>
Cc: Ken Aitchison <ken@xylanta.com>
Tested-by: Andy Jackson <andy@xylanta.com>
Link: https://lore.kernel.org/all/20240625140353.769373-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 889b2ae913 ("can: gs_usb: add usb endpoint address detection at driver probe step")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e19a3b590 upstream.
The fixed patch introduced an additional condition to enter the scope
where the 'root' device_node is released (!settings->board_type,
currently 'err'), which avoid decrementing the refcount with a call to
of_node_put() if that second condition is not satisfied.
Move the call to of_node_put() to the point where 'root' is no longer
required to avoid leaking the resource if err is not zero.
Cc: stable@vger.kernel.org
Fixes: 7682de8b33 ("wifi: brcmfmac: of: Fetch Apple properties")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1304446f67 upstream.
If there is an error during some initialization related to firmware,
the function ath12k_dp_cc_cleanup is called to release resources.
However this is released again when the device is unbinded (ath12k_pci),
and we get:
BUG: kernel NULL pointer dereference, address: 0000000000000020
at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k]
Call Trace:
ath12k_dp_cc_cleanup
ath12k_dp_free
ath12k_core_deinit
ath12k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set to NULL the released structure in
ath12k_dp_cc_cleanup at the end.
cc: stable@vger.kernel.org
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://patch.msgid.link/20241017181004.199589-2-jtornosm@redhat.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c1b544563 upstream.
Syzkaller reported a hung task with uevent_show() on stack trace. That
specific issue was addressed by another commit [0], but even with that
fix applied (for example, running v6.12-rc5) we face another type of hung
task that comes from the same reproducer [1]. By investigating that, we
could narrow it to the following path:
(a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
dummy_hcd infrastructure.
(b) During the probe of rtl8192cu, the driver ends-up performing an efuse
read procedure (which is related to EEPROM load IIUC), and here lies the
issue: the function read_efuse() calls read_efuse_byte() many times, as
loop iterations depending on the efuse size (in our example, 512 in total).
This procedure for reading efuse bytes relies in a loop that performs an
I/O read up to *10k* times in case of failures. We measured the time of
the loop inside read_efuse_byte() alone, and in this reproducer (which
involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
consequence, we have the driver stuck in its probe routine for big time,
exposing a stack trace like below if we attempt to reboot the system, for
example:
task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
__schedule+0xe22/0xeb6
schedule_timeout+0xe7/0x132
__wait_for_common+0xb5/0x12e
usb_start_wait_urb+0xc5/0x1ef
? usb_alloc_urb+0x95/0xa4
usb_control_msg+0xff/0x184
_usbctrl_vendorreq_sync+0xa0/0x161
_usb_read_sync+0xb3/0xc5
read_efuse_byte+0x13c/0x146
read_efuse+0x351/0x5f0
efuse_read_all_map+0x42/0x52
rtl_efuse_shadow_map_update+0x60/0xef
rtl_get_hwinfo+0x5d/0x1c2
rtl92cu_read_eeprom_info+0x10a/0x8d5
? rtl92c_read_chip_version+0x14f/0x17e
rtl_usb_probe+0x323/0x851
usb_probe_interface+0x278/0x34b
really_probe+0x202/0x4a4
__driver_probe_device+0x166/0x1b2
driver_probe_device+0x2f/0xd8
[...]
We propose hereby to drastically reduce the attempts of doing the I/O
reads in case of failures, restricted to USB devices (given that
they're inherently slower than PCIe ones). By retrying up to 10 times
(instead of 10000), we got reponsiveness in the reproducer, while seems
reasonable to believe that there's no sane USB device implementation in
the field requiring this amount of retries at every I/O read in order
to properly work. Based on that assumption, it'd be good to have it
backported to stable but maybe not since driver implementation (the 10k
number comes from day 0), perhaps up to 6.x series makes sense.
[0] Commit 15fffc6a56 ("driver core: Fix uevent_show() vs driver detach race")
[1] A note about that: this syzkaller report presents multiple reproducers
that differs by the type of emulated USB device. For this specific case,
check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000.
Cc: stable@vger.kernel.org # v6.1+
Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca68ce0d9f upstream.
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath12k_pci),
and we get:
WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80
Call Trace:
free_large_kmalloc
ath12k_dp_free
ath12k_core_deinit
ath12k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free.
cc: stable@vger.kernel.org
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://patch.msgid.link/20241017181004.199589-3-jtornosm@redhat.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3661c05c54 ]
If we go through the PCI shutdown or suspend path, we shutdown the
NIC but PTP remains registered. If the kernel continues to run for
a little bit, the periodic PTP .do_aux_work() function may be called
and it will read the PHC from the BAR register. Since the device
has already been disabled, it will cause a PCIe completion timeout.
Fix it by calling bnxt_ptp_clear() in the PCI shutdown/suspend
handlers. bnxt_ptp_clear() will unregister from PTP and
.do_aux_work() will be canceled.
In bnxt_resume(), we need to re-initialize PTP.
Fixes: a521c8a01d ("bnxt_en: Move bnxt_ptp_init() from bnxt_open() back to bnxt_init_one()")
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e9614cd95 ]
Instead of passing the 2nd parameter phc_cfg to bnxt_ptp_init().
Store it in bp->ptp_cfg so that the caller doesn't need to know what
the value should be.
In the next patch, we'll need to call bnxt_ptp_init() in bnxt_resume()
and this will make it easier.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 3661c05c54 ("bnxt_en: Unregister PTP during PCI shutdown and suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5311598f7f ]
After successful PCIe AER recovery, FW will reset all resource
reservations. If it is IF_UP, the driver will call bnxt_open() and
all resources will be reserved again. It it is IF_DOWN, we should
call bnxt_reserve_rings() so that we can reserve resources including
RoCE resources to allow RoCE to resume after AER. Without this
patch, RoCE fails to resume in this IF_DOWN scenario.
Later, if it becomes IF_UP, bnxt_open() will see that resources have
been reserved and will not reserve again.
Fixes: fb1e6e562b ("bnxt_en: Fix AER recovery.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 762ca6eed0 ]
During initialization, the AF driver resets all blocks. The RPM (MAC)
block and NIX block operate on a credit-based model. When the NIX block
resets during active traffic flow, it doesn't release credits to the RPM
block. This causes the RPM FIFO to overflow, leading to receive traffic
struck.
To address this issue, the patch introduces the following changes:
1. Stop receiving traffic at the MAC level during AF driver
initialization.
2. Perform an X2P reset (prevents RXFIFO of all LMACS from pushing data)
3. Reset the NIX block.
4. Clear the X2P reset and re-enable receiving traffic.
Fixes: 54d557815e ("octeontx2-af: Reset all RVU blocks")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
