[ Upstream commit 7af1e0acee ]
With the possibility of multiple wq drivers that can be bound to the wq,
the user config tool accel-config needs a way to know which wq driver to
bind to the wq. Introduce per wq driver_name sysfs attribute where the user
can indicate the driver to be bound to the wq. This allows accel-config to
just bind to the driver using wq->driver_name.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230908201045.4115614-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8dfa57aabf ("dmaengine: idxd: Fix allowing write() from different address spaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd2aad57d ]
The following splat has been observed on a SAMA5D27 platform using
atmel_serial:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74
Hardware name: Atmel SAMA5
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __might_resched+0x38c/0x598
__might_resched from disable_irq+0x1c/0x48
disable_irq from mctrl_gpio_disable_ms+0x74/0xc0
mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4
atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8
atmel_set_termios from uart_change_line_settings+0x15c/0x994
uart_change_line_settings from uart_set_termios+0x2b0/0x668
uart_set_termios from tty_set_termios+0x600/0x8ec
tty_set_termios from ttyport_set_flow_control+0x188/0x1e0
ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]
wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]
hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]
hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]
hci_power_on [bluetooth] from process_one_work+0x998/0x1a38
process_one_work from worker_thread+0x6e0/0xfb4
worker_thread from kthread+0x3d4/0x484
kthread from ret_from_fork+0x14/0x28
This warning is emitted when trying to toggle, at the highest level,
some flow control (with serdev_device_set_flow_control) in a device
driver. At the lowest level, the atmel_serial driver is using
serial_mctrl_gpio lib to enable/disable the corresponding IRQs
accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to
disable_irq (called in mctrl_gpio_disable_ms) being possibly called in
some atomic context (some tty drivers perform modem lines configuration
in regions protected by port lock).
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one
and a blocking one. Replace mctrl_gpio_disable_ms calls with the
relevant version depending on whether the call is protected by some port
lock.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20250217-atomic_sleep_mctrl_serial_gpio-v3-1-59324b313eef@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98fdaeb296 ]
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbcfcb239b ]
Some Alienware laptops that support the SMM interface, may have up to 4
fans.
Tested on an Alienware x15 r1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250304055249.51940-2-kuurtb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit facd226f7e upstream.
When retpoline mitigation is enabled for spectre-v2, enabling
call-depth-tracking and RSB stuffing also mitigates ITS. Add cmdline option
indirect_target_selection=stuff to allow enabling RSB stuffing mitigation.
When retpoline mitigation is not enabled, =stuff option is ignored, and
default mitigation for ITS is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2665281a07 upstream.
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4818881c4 upstream.
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7bc263840b ]
Remove the rq::cpu_capacity_orig field and use arch_scale_cpu_capacity()
instead.
The scheduler uses 3 methods to get access to a CPU's max compute capacity:
- arch_scale_cpu_capacity(cpu) which is the default way to get a CPU's capacity.
- cpu_capacity_orig field which is periodically updated with
arch_scale_cpu_capacity().
- capacity_orig_of(cpu) which encapsulates rq->cpu_capacity_orig.
There is no real need to save the value returned by arch_scale_cpu_capacity()
in struct rq. arch_scale_cpu_capacity() returns:
- either a per_cpu variable.
- or a const value for systems which have only one capacity.
Remove rq::cpu_capacity_orig and use arch_scale_cpu_capacity() everywhere.
No functional changes.
Some performance tests on Arm64:
- small SMP device (hikey): no noticeable changes
- HMP device (RB5): hackbench shows minor improvement (1-2%)
- large smp (thx2): hackbench and tbench shows minor improvement (1%)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20231009103621.374412-2-vincent.guittot@linaro.org
Stable-dep-of: 79443a7e9d ("cpufreq/sched: Explicitly synchronize limits_changed flag handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit beb3c5ad88 ]
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acf4da17de ]
alt-ifname attr is directly placed in requests (as an alternative
to ifname) but in responses its wrapped up in IFLA_PROP_LIST
and only there is may be multi-attr. See rtnl_fill_prop_list().
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1e4e454223 upstream.
Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.
Fixes: 6c781a3513 ("dt-bindings: arm: Add CoreSight TPDM hardware")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d72deaf05a upstream.
Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.
Fixes: a8fbe1442c ("dt-bindings: arm: Adds CoreSight TPDA hardware definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a544a39e0 upstream.
The MIPID02 can use up to 2 data lanes which leads to having a maximum
item number of 3 for the lane-polarities since this also contains the
clock lane.
CC: stable@vger.kernel.org
Fixes: c2741cbe7f ("dt-bindings: media: st,stmipid02: Convert the text bindings to YAML")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f0d2de417 ]
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
[ Apply only documentation changes as commit which causes boot
crash when boot CPU is nohz_full is not backported to stable
kernels - Krishanth ]
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri@sony.com>
[ strip out upstream commit and Fixes: so tools don't get confused that
this commit actually does anything real - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9407bda845 upstream
Applying microcode late can be fatal for the running kernel when the
update changes functionality which is in use already in a non-compatible
way, e.g. by removing a CPUID bit.
There is no way for admins which do not have access to the vendors deep
technical support to decide whether late loading of such a microcode is
safe or not.
Intel has added a new field to the microcode header which tells the
minimal microcode revision which is required to be active in the CPU in
order to be safe.
Provide infrastructure for handling this in the core code and a command
line switch which allows to enforce it.
If the update is considered safe the kernel is not tainted and the annoying
warning message not emitted. If it's enforced and the currently loaded
microcode revision is not safe for late loading then the load is aborted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211724.079611170@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 064737920b upstream.
The hwcaps code that exposes SVE features to userspace only
considers ID_AA64ZFR0_EL1, while this is only valid when
ID_AA64PFR0_EL1.SVE advertises that SVE is actually supported.
The expectations are that when ID_AA64PFR0_EL1.SVE is 0, the
ID_AA64ZFR0_EL1 register is also 0. So far, so good.
Things become a bit more interesting if the HW implements SME.
In this case, a few ID_AA64ZFR0_EL1 fields indicate *SME*
features. And these fields overlap with their SVE interpretations.
But the architecture says that the SME and SVE feature sets must
match, so we're still hunky-dory.
This goes wrong if the HW implements SME, but not SVE. In this
case, we end-up advertising some SVE features to userspace, even
if the HW has none. That's because we never consider whether SVE
is actually implemented. Oh well.
Fix it by restricting all SVE capabilities to ID_AA64PFR0_EL1.SVE
being non-zero. The HWCAPS documentation is amended to reflect the
actually checks performed by the kernel.
Fixes: 06a916feca ("arm64: Expose SVE2 features for userspace")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250107-arm64-2024-dpisa-v5-1-7578da51fc3d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6856edf7ea ]
The sense resistor used for measuring currents is typically some tens of
milli Ohms. It has accidentally been documented to be tens of mega Ohms.
Fix the size of this resistor and a few copy-paste errors while at it.
Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which
can't represent resistors smaller than one Ohm), and introduce a new
'rohm,charger-sense-resistor-micro-ohms' property with appropriate
minimum, maximum and default values instead.
Fixes: 4238dc1e64 ("dt_bindings: mfd: Add ROHM BD71815 PMIC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08242719a8 ]
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the property from the MT6315 regulator binding and its examples.
Fixes: 977fb5b584 ("regulator: document binding for MT6315 regulator")
Fixes: 6d435a94ba ("regulator: mt6315: Enforce regulator-compatible, not name")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241211052427.4178367-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 609bc99a44 ]
The LED color definitions have always been in
include/dt-bindings/leds/common.h in upstream.
Fixes: 5c7f8ffe74 ("dt: bindings: Add multicolor class dt bindings documention")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a3c7ea92e90b77032f2e480d46418b087709286d.1731588129.git.geert+renesas@glider.be
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2b8e93ec0 ]
The term "slot ID" has nothing to do with the SDIO function number
which is specified in the reg property of the subnodes, rephrase
the description to be more accurate.
Fixes: f9b7989859 ("dt-bindings: mmc: Add YAML schemas for the generic MMC options")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241128-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v4-1-11d9f9200a59@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2b46ae022 ]
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b78b470f ]
HiSilicon HIP10/11 platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240731092658.11012-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: c2b46ae022 ("ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ad4ff638 ]
Due to recent changes on the way we're maintaining media, the
location of the main tree was updated.
Change docs accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1aa772be04 upstream.
Add fsl,pps-channel property to select where to connect the PPS signal.
This depends on the internal SoC routing and on the board, for example
on the i.MX8 SoC it can be connected to an external pin (using channel 1)
or to internal eDMA as DMA request (channel 0).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ff4490e2a upstream.
oss.sgi.com is long dead, refer to the current linux-xfs list instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb84dc8f4 ]
Update the documentation to match the behaviour of the code.
pm_runtime_resume_and_get() always returns 0 on success, even if
__pm_runtime_resume() returns 1.
Fixes: 2c412337cf ("PM: runtime: Add documentation for pm_runtime_resume_and_get()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Link: https://patch.msgid.link/20241203143729.478-1-paul.barker.ct@bp.renesas.com
[ rjw: Subject and changelog edits, adjusted new comment formatting ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa046449a ]
The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary
Bus Reset on the bridge leading to the device. These only work if the
device is the only device below the bridge.
Add a sysfs 'reset_subordinate' attribute on bridges that can assert
Secondary Bus Reset regardless of how many devices are below the bridge.
This resets all the devices below a bridge in a single command, including
the locking and config space save/restore that reset methods normally do.
This may be the only way to reset devices that don't support other reset
methods (ACPI, FLR, PM reset, etc).
Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7a0350583 ]
ZRAM_MEMORY_TRACKING enables two features:
- per-entry ac-time tracking
- debugfs interface
The latter one is the reason why memory-tracking depends on DEBUG_FS,
while the former one is used far beyond debugging these days. Namely
ac-time is used for fine grained writeback of idle entries (pages).
Move ac-time tracking under its own config option so that it can be
enabled (along with writeback) on systems without DEBUG_FS.
[senozhatsky@chromium.org: ifdef fixup, per Dmytro]
Link: https://lkml.kernel.org/r/20231117013543.540280-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20231115024223.4133148-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d37da422ed ("zram: clear IDLE flag in mark_idle()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66f759832 ]
Add the missing 'name' parameter to the mount_api documentation for
fs_validate_description().
Fixes: 96cafb9ccb ("fs_parser: remove fs_parameter_description name field")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241125215021.231758-1-rdunlap@infradead.org
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47f3f5a82a ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one and add clock-names to differentiate between parent clocks and
the bus clock.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4649cbd97f ]
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1806c41c ]
While fuzzing an arm64 kernel, Alexander Potapenko reported:
| BUG: KCSAN: data-race in ktime_get_mono_fast_ns / timekeeping_update
|
| write to 0xffffffc082e74248 of 56 bytes by interrupt on cpu 0:
| update_fast_timekeeper kernel/time/timekeeping.c:430 [inline]
| timekeeping_update+0x1d8/0x2d8 kernel/time/timekeeping.c:768
| timekeeping_advance+0x9e8/0xb78 kernel/time/timekeeping.c:2344
| update_wall_time+0x18/0x38 kernel/time/timekeeping.c:2360
| [...]
|
| read to 0xffffffc082e74258 of 8 bytes by task 5260 on cpu 1:
| __ktime_get_fast_ns kernel/time/timekeeping.c:372 [inline]
| ktime_get_mono_fast_ns+0x88/0x174 kernel/time/timekeeping.c:489
| init_srcu_struct_fields+0x40c/0x530 kernel/rcu/srcutree.c:263
| init_srcu_struct+0x14/0x20 kernel/rcu/srcutree.c:311
| [...]
|
| value changed: 0x000002f875d33266 -> 0x000002f877416866
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 UID: 0 PID: 5260 Comm: syz.2.7483 Not tainted 6.12.0-rc3-dirty #78
This is a false positive data race between a seqcount latch writer and a reader
accessing stale data. Since its introduction, KCSAN has never understood the
seqcount_latch interface (due to being unannotated).
Unlike the regular seqlock interface, the seqcount_latch interface for latch
writers never has had a well-defined critical section, making it difficult to
teach tooling where the critical section starts and ends.
Introduce an instrumentable (non-raw) seqcount_latch interface, with
which we can clearly denote writer critical sections. This both helps
readability and tooling like KCSAN to understand when the writer is done
updating all latch copies.
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Reported-by: Alexander Potapenko <glider@google.com>
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-4-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ec62e01a ]
The description of PDU1 format usage mistakenly referred to PDU2 format.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8380dbf1b9 ]
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are
supposedly valid (see link below), which is not the case today as "rx"
alone is not accepted by the current binding.
Let's rework the two interrupt properties to expose all correct
possibilities.
Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17d8adc4cd ]
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a0683be5b ]
Some tests written in bash source other files in a parent directory. For
example, drivers/net/bonding/dev_addr_lists.sh sources
net/forwarding/lib.sh. If a subset of tests is exported and run outside the
source tree (for example by using `make -C tools/testing/selftests gen_tar
TARGETS="drivers/net/bonding"`), these other files must be made available
as well.
Commit ae108c48b5 ("selftests: net: Fix cross-tree inclusion of scripts")
addressed this problem by symlinking and copying the sourced files but this
only works for direct dependencies. Commit 25ae948b44 ("selftests/net:
add lib.sh") changed net/forwarding/lib.sh to source net/lib.sh. As a
result, that latter file must be included as well when the former is
exported. This was not handled and was reverted in commit 2114e83381
("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to
allow reinstating the inclusion of net/lib.sh from net/forwarding/lib.sh,
add a mechanism to list dependent files in a new Makefile variable and
export them. This allows sourcing those files using the same expression
whether tests are run in-tree or exported.
Dependencies are not resolved recursively so transitive dependencies must
be listed in TEST_INCLUDES. For example, if net/forwarding/lib.sh sources
net/lib.sh; the Makefile related to a test that sources
net/forwarding/lib.sh from a parent directory must list:
TEST_INCLUDES := \
../../../net/forwarding/lib.sh \
../../../net/lib.sh
v2:
Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski)
v1 (from RFC):
* changed TEST_INCLUDES to take relative paths, like other TEST_* variables
(Vladimir Oltean)
* preserved common "$(MAKE) OUTPUT=... -C ... target" ordering in Makefile
(Petr Machata)
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
