commit 31e97d7c9a upstream.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02d4e62ae2 ]
With clang-16, building without COMMON_CLK triggers a range check on
udelay() because of a constant division-by-zero calculation:
ld.lld: error: undefined symbol: __bad_udelay
>>> referenced by mt9m114.c
>>> drivers/media/i2c/mt9m114.o:(mt9m114_power_on) in archive vmlinux.a
In this configuration, the driver already fails to probe, before
this function gets called, so it's enough to suppress the assertion.
Do this by using fsleep(), which turns long delays into sleep() calls
in place of the link failure.
This is probably a good idea regardless to avoid overly long dynamic
udelay() calls on a slow clock.
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 24d756e914 ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2f885e2f ]
If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.
Fixes: e6089feca4 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb387fcb5c ]
The driver always enables the clocks at probe() and disables them only
at remove(). It is not clear why the driver does this, as it supports
runtime PM, and enables and disables the clocks in the runtime resume
and suspend callbacks. Also, in the case runtime PM is not available,
the driver calls the resume and suspend callbacks manually from probe()
and remove().
Drop the unnecessary clock enable, thus enabling the clocks only when
actually needed.
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-2-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b86 ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5705b0e0eb ]
The driver always calls mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in remove(). This causes multiple WARNs from the
kernel, as the clocks get disabled too many times.
Fix the remove() to call mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in a way that reverses what is done in probe().
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-1-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b86 ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 350ab13e13 ]
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f1faa154a ]
The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.
When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.
So add this back, but this time in the bttv driver rather than in the
vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d3c8990e2 ]
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf44455 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de6ee94aa ]
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f033c87fda ]
Starting with commit f6038de293 ("arm64: dts: imx8qm: Fix VPU core
alias name") the alias for VPU cores uses dashes instead of underscores.
Adjust the alias stem accordingly. Fixes the errors:
amphion-vpu-core 2d040000.vpu-core: can't get vpu core id
amphion-vpu-core 2d050000.vpu-core: can't get vpu core id
Fixes: f6038de293 ("arm64: dts: imx8qm: Fix VPU core alias name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c0d9e12b1 ]
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 340ce50f75 ("media: hantro: Enable HOLD_CAPTURE_BUF for H.264")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3907f6ef8e ]
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 0c078e310b ("media: visl: add virtual stateless decoder driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8212c5c87 ]
This patch reverts commit c677d7ae83
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.
Fix it by removing the cancel_delayed_work_sync function.
Fixes: c677d7ae83 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ded85b0c0e ]
Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack.
Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/
Fixes: e5be15c638 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver fails to build when HAVE_CLK and COMMON_CLK are disabled:
x86_64-linux-ld: vmlinux.o: in function `mgb4_remove':
mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop'
x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister'
Add a Kconfig dependency to enforce a clean build.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH
memory layout is different as the FPGA requires bigger FW images.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The VSP1 driver uses the subdev .s_stream() operation to stop WPF
instances, without a corresponding call to start them. The V4L2 subdev
core started warning about unbalanced .s_stream() calls in commit
009905ec50 ("media: v4l2-subdev: Document and enforce .s_stream()
requirements"), causing a regression with this driver.
Fix the problem by replacing the .s_stream() operation with an explicit
function call for WPF instances. This allows sharing an additional data
structure between RPF and WPF instances.
Fixes: 009905ec50 ("media: v4l2-subdev: Document and enforce .s_stream() requirements")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-media/2221395-6a9b-9527-d697-e76aebc6af@linux-m68k.org/
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----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=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
The Nuvoton NPCM Video Capture/Differentiation Engine (VCD) and Encoding
Compression Engine (ECE) are only present on Nuvoton NPCM SoCs. Hence
add a dependency on ARCH_NPCM, to prevent asking the user about these
drivers when configuring a kernel without Nuvoton NPCM Architecture
support.
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The firmware path for some of the resources is still the old format. This
fixes the path to address the firmware correctly using the new .mbn
format.
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Array `data` in `struct hfi_sfr` is being used as a fake flexible array
at run-time:
drivers/media/platform/qcom/venus/hfi_venus.c:
1033 p = memchr(sfr->data, '\0', sfr->buf_size);
1034 /*
1035 * SFR isn't guaranteed to be NULL terminated since SYS_ERROR indicates
1036 * that Venus is in the process of crashing.
1037 */
1038 if (!p)
1039 sfr->data[sfr->buf_size - 1] = '\0';
1040
1041 dev_err_ratelimited(dev, "SFR message from FW: %s\n", sfr->data);
Fake flexible arrays are deprecated, and should be replaced by
flexible-array members. So, replace one-element array with a
flexible-array member in `struct hfi_sfr`.
While there, also annotate array `data` with __counted_by() to prepare
for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
This results in no differences in binary output.
This issue was found with the help of Coccinelle, and audited and fixed
manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Supported codec bitmask is populated from the payload from venus firmware.
There is a possible case when all the bits in the codec bitmask is set. In
such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized.
Now while filling the caps for encoder, it can lead to access the caps
array beyong 32 index. Hence leading to OOB write.
The fix counts the supported encoder and decoder. If the count is more than
max, then it skips accessing the caps.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The hfi parser, parses the capabilities received from venus firmware and
copies them to core capabilities. Consider below api, for example,
fill_caps - In this api, caps in core structure gets updated with the
number of capabilities received in firmware data payload. If the same api
is called multiple times, there is a possibility of copying beyond the max
allocated size in core caps.
Similar possibilities in fill_raw_fmts and fill_profile_level functions.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Buffer requirement, for different buffer type, comes from video firmware.
While copying these requirements, there is an OOB possibility when the
payload from firmware is more than expected size. Fix the check to avoid
the OOB possibility.
Cc: stable@vger.kernel.org
Fixes: 09c2845e8f ("[media] media: venus: hfi: add Host Firmware Interface (HFI)")
Reviewed-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Read and write pointers are used to track the packet index in the memory
shared between video driver and firmware. There is a possibility of OOB
access if the read or write pointer goes beyond the queue memory size.
Add checks for the read and write pointer to avoid OOB access.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The driver uses MIPI DPHY helper routines from the PHY core. Make sure
we select the relevant config for compilation.
Fixes: a91d06f46b ("media: cadence: csi2rx: Configure DPHY using link freq")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310170258.UzSN4RUB-lkp@intel.com/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
[Sakari Ailus: Also select GENERIC_PHY.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'meson' directory contains two separate drivers, so it should be added
to Makefile compilation hierarchy unconditionally, because otherwise the
meson-ao-cec-g12a won't be compiled if meson-ao-cec is not selected.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 4be5e8648b ("media: move CEC platform drivers to a separate directory")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In order to avoid error pointers from frame_vector_pages(), we could
use IS_ERR() to check the return value to fix this. This checking
operation could make sure that vector contains pages.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix the build warnings that were detected by the linux-media
build scripts tool:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
In function 'mdp_path_config.isra':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
warning: 'ctx' may be used uninitialized [-Wmaybe-uninitialized]
| out = CFG_COMP(MT8195, ctx->param, outputs[0]);
| ~~~^~~~~~~
drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h: note:
in definition of macro 'CFG_COMP'
| (IS_ERR_OR_NULL(comp) ? 0 : _CFG_COMP(plat, comp, mem))
| ^~~~
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
note: 'ctx' was declared here
| struct mdp_comp_ctx *ctx;
|
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After gstreamer rework the dynamic resolution change handling, gstreamer
stop doing capture buffer allocation based on guesses and wait for the
source change event when available. It requires driver always notify
source change event in the initialization, even if the size parsed is
equal to the size set on capture queue. otherwise, the pipeline will be
stalled.
Currently driver may not notify source change event if the parsed format
and size are equal to those previously established, but it may stall the
gstreamer pipeline.
The link of gstreamer patch is
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437
Fixes: b4e1fb8643 ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As Andrzej suggested, use EP5_BUF_SIZE macro to replace the other three
places of 4096 in cx231xx with EP5_BUF_SIZE.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both debugfs_create_dir() and debugfs_create_file() return ERR_PTR
and never return NULL.
As Hans suggested, this patch removes the error checking for both
debugfs_create_dir() and debugfs_create_file() in smsdvb_debugfs_create().
This is because the DebugFS kernel API is developed in a way that the
caller can safely ignore the errors that occur during the creation of
DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating()
which can handle it gracefully. So these checks are unnecessary.
And as Hans pointed out, it's much better to first allocate debug_data
before calling debugfs_create_dir, which need not to clean anything up in
that case.
Fixes: 503efe5cfc ("[media] siano: split debugfs code into a separate file")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Handle invalid encoder vsi in vpu_enc_init to ensure the encoder
vsi is valid for future use.
Fixes: 1972e32431 ("media: mediatek: vcodec: Fix possible invalid memory access for encoder")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
debugfs_create_file() return ERR_PTR and never return NULL.
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Fixes: 52fed10ad7 ("media: aspeed: add debugfs")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Mainlined RK3588 clock driver manage by itself the dependency between
aclk/hclk and their root clocks (aclk_vdpu_root/hclk_vdpu_root).
RK3588 av1 video decoder do not have to take care of it anymore so
remove them from the list and be compliant with yaml bindings description.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In order to avoid error pointers from frame_vector_pages(), we could
use IS_ERR() to check the return value to fix this. This checking
operation could make sure that vector contains pages.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add space between ){]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the cx NULL pointer check is true, then it reports
an error with CX18_ERR, but that uses cx. Replace it with
pr_err.
Reported by smatch:
drivers/media/pci/cx18/cx18-mailbox.c:834 cx18_vapi() error: we previously assumed 'cx' could be null (see line 833)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For consistency use goto instead of return.
This fixes a smatch warning:
drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:2792 mxc_jpeg_probe() warn: missing unwind goto?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of returning an error, goto the mutex unlock at
the end of the function.
Fixes smatch warning:
drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
Locked on : 326,387
Unlocked on: 465,467
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'pd' can be NULL, and in that case it shouldn't be passed to
PTR_ERR. Fixes a smatch warning:
drivers/media/platform/qcom/venus/pm_helpers.c:873 vcodec_domains_get() warn: passing zero to 'PTR_ERR'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
The child device_node pointer was used for two different children.
This confused smatch, causing this warning:
drivers/media/i2c/adp1653.c:444 adp1653_of_init() warn: missing unwind goto?
Use two different pointers, one for each child node, and add separate
goto labels for each node as well. This also improves error logging
since it will now state for which node the property was missing.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hverkuil: fix typo: childs -> children]
