[ Upstream commit d7b95ad7a8 ]
The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.
Set the minimum and maximum value to match the mode value.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3735228bbe ]
HTS must be more then width, so the 1080 value clearly is wrong,
this is then corrected with some weird math dividing clocks in
to_pixels_per_line() which results in the hts getting multiplied by 2,
resulting in 2160.
Instead just directly set hts to the correct value of 2160 and
drop to_pixels_per_line().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09b4195021 ]
Error code is assigned to 'stat', return 'stat' rather than '-1'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c8ddce2f ]
mutext_lock should not be called in condition of wait_event, otherwise,
when CONFIG_DEBUG_ATOMIC_SLEEP is enabled, we may meet the following
warning:
do not call blocking ops when !TASK_RUNNING; state=2
WARNING: CPU: 5 PID: 741 at kernel/sched/core.c:9859
__might_sleep+0x80/0xa4
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc :
__might_sleep+0x80/0xa4 lr : __might_sleep+0x80/0xa4 sp : ffffffc0123738a0
x29: ffffffc0123738a0 x28: ffffffc009194c48 x27: ffffffc00bbc1050
x26: ffffff8814b282f0 x25: ffffff8814b280d0 x24: ffffff8814b28080
x23: 0000000000000001 x22: 0000000000000032 x21: ffffffc00bbc1000
x20: 000000000000011b x19: ffffffc009324670 x18: 00000000fffffffd
x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
x14: 00058b5b8b9aa1f1 x13: ffffffc00903cda0 x12: 00000000d744fcc9
x11: 000000000000001c x10: 00000000000009a0 x9 : ffffffc0090201f4
x8 : ffffff8828245000 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 00000000410fd080 x4 : 0000000000000002 x3 : ffffff8815aab4c8
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8828244600
Call trace:
__might_sleep+0x80/0xa4
mutex_lock+0x2c/0x80
sync_session_response+0x110/0x310
vpu_session_send_cmd+0x18c/0x244
vpu_session_start+0x38/0x70
vdec_start_session+0x1b4/0x3e0
vpu_vb2_start_streaming+0xa0/0x1c4
vb2_start_streaming+0x74/0x160
vb2_core_qbuf+0x488/0x650
vb2_qbuf+0x9c/0x100
v4l2_m2m_qbuf+0x7c/0x224
v4l2_m2m_ioctl_qbuf+0x20/0x2c
v4l_qbuf+0x50/0x6c
__video_do_ioctl+0x174/0x3f0
video_usercopy+0x210/0x7cc
video_ioctl2+0x20/0x30
v4l2_ioctl+0x48/0x6c
we need to refine check_is_responsed() to remove the mutext_lock, each
cmd has a monotonically increasing id, and cmds are executed
sequentially, so we can check the id of the last reponsed cmd, then
determine whether a command has been responded or not.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
CC: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efa28efd9c ]
Supported media bus codes on the resizer sink pad are identical to the
ISP source pad. The .enum_mbus_code() handler thus delegates the
enumeration to the ISP's operation. This is problematic for two
reasons:
- Format enumeration on the ISP source pad is dependent on the format
configured on the ISP sink pad for the same subdev state (TRY or
ACTIVE), while format enumeration on the resizer sink pad should
return all formats supported by the resizer subdev, regardless of the
ISP configuration.
- Delegating the operation involves creating a fake v4l2_subdev_state on
the stack to pass to the ISP .enum_mbus_code() handler. This gets in
the way of evolution of both the ISP enumeration handler and, more
generally, the V4L2 subdev state infrastructure.
Fix those two issues by implementing format enumeration manually for the
resizer.
Link: https://lore.kernel.org/r/20231126020948.2700-1-laurent.pinchart@ideasonboard.com
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 870565f063 ]
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0753874617 ]
Store the IRQ lines used by the driver for easy access. These are needed
in future patches which fix IRQ race issues.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-3-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eb7910e1b ]
The IRQ handler rkisp1_isr() calls sub-handlers, all of which returns an
irqreturn_t value, but rkisp1_isr() ignores those values and always
returns IRQ_HANDLED.
Fix this by collecting the return values, and returning IRQ_HANDLED or
IRQ_NONE as appropriate.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-2-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d2a31fe4 ]
In all known platforms the ISP has dedicated IRQ lines, but for some
reason the driver uses IRQF_SHARED.
Supporting IRQF_SHARED properly requires handling interrupts even when
our device is disabled, and the driver does not handle this. To avoid
adding such code, and to be sure the driver won't accidentally be used
in a platform with shared interrupts, let's drop the IRQF_SHARED flag.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-1-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6180056b0e ]
The device does not implement the power line frequency control
correctly. It is a UVC 1.5 device, but implements the control as a UVC
1.1 device.
Add the corresponding control mapping override.
Bus 003 Device 002: ID 2b7e:b752 SunplusIT Inc HD Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x2b7e
idProduct 0xb752
bcdDevice 0.04
iManufacturer 1 SunplusIT Inc
iProduct 2 HD Camera
iSerial 3 01.00.00
bNumConfigurations 1
Cc: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dba3e70191 ]
The device does not implement the control properly.
Fixes v4l2-compliance error:
info: checking control 'Power Line Frequency' (0x00980918)
fail: v4l2-test-controls.cpp(552): could not set valid menu item 3
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7dc39260 ]
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3695e86d2 ]
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60fc87a695 ]
The conversion to CCI also converted the multi-byte register access to
big-endian. Correct the register definition by using the correct
little-endian ones.
Fixes: af73323b97 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed the Fixes: tag.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92e7a013f ]
Some sensors, e.g. Sony IMX290, are using little-endian registers. Add
support for those by encoding the endianness into Bit 20 of the register
address.
Fixes: af73323b97 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd93cc245d ]
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d92e7a013f ("media: v4l2-cci: Add support for little-endian encoded registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 206c857dd1 upstream.
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38e1857933 upstream.
In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.
Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.
Fixes: da4ede4b7f ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b33cb0cbe2 upstream.
Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.
Thanks to Jacopo Mondi for pointing the issue.
Fixes: 6c01e6f3f2 ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 608ca5a60e upstream.
For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.
Cc: stable@kernel.org
Fixes: 7938f42181 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a78052db upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
It also sets the runtime PM status to active as the sensor was turned
on by i2c-core.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b0454cfd8 upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: 7ee8505468 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e242e9c144 upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63f ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efa5fe19c0 upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7d ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31e97d7c9a upstream.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02d4e62ae2 ]
With clang-16, building without COMMON_CLK triggers a range check on
udelay() because of a constant division-by-zero calculation:
ld.lld: error: undefined symbol: __bad_udelay
>>> referenced by mt9m114.c
>>> drivers/media/i2c/mt9m114.o:(mt9m114_power_on) in archive vmlinux.a
In this configuration, the driver already fails to probe, before
this function gets called, so it's enough to suppress the assertion.
Do this by using fsleep(), which turns long delays into sleep() calls
in place of the link failure.
This is probably a good idea regardless to avoid overly long dynamic
udelay() calls on a slow clock.
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 24d756e914 ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2f885e2f ]
If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.
Fixes: e6089feca4 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb387fcb5c ]
The driver always enables the clocks at probe() and disables them only
at remove(). It is not clear why the driver does this, as it supports
runtime PM, and enables and disables the clocks in the runtime resume
and suspend callbacks. Also, in the case runtime PM is not available,
the driver calls the resume and suspend callbacks manually from probe()
and remove().
Drop the unnecessary clock enable, thus enabling the clocks only when
actually needed.
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-2-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b86 ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5705b0e0eb ]
The driver always calls mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in remove(). This causes multiple WARNs from the
kernel, as the clocks get disabled too many times.
Fix the remove() to call mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in a way that reverses what is done in probe().
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-1-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b86 ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 350ab13e13 ]
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f1faa154a ]
The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.
When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.
So add this back, but this time in the bttv driver rather than in the
vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d3c8990e2 ]
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf44455 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de6ee94aa ]
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f033c87fda ]
Starting with commit f6038de293 ("arm64: dts: imx8qm: Fix VPU core
alias name") the alias for VPU cores uses dashes instead of underscores.
Adjust the alias stem accordingly. Fixes the errors:
amphion-vpu-core 2d040000.vpu-core: can't get vpu core id
amphion-vpu-core 2d050000.vpu-core: can't get vpu core id
Fixes: f6038de293 ("arm64: dts: imx8qm: Fix VPU core alias name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c0d9e12b1 ]
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 340ce50f75 ("media: hantro: Enable HOLD_CAPTURE_BUF for H.264")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3907f6ef8e ]
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 0c078e310b ("media: visl: add virtual stateless decoder driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8212c5c87 ]
This patch reverts commit c677d7ae83
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.
Fix it by removing the cancel_delayed_work_sync function.
Fixes: c677d7ae83 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ded85b0c0e ]
Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack.
Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/
Fixes: e5be15c638 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver fails to build when HAVE_CLK and COMMON_CLK are disabled:
x86_64-linux-ld: vmlinux.o: in function `mgb4_remove':
mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop'
x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister'
Add a Kconfig dependency to enforce a clean build.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH
memory layout is different as the FPGA requires bigger FW images.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The VSP1 driver uses the subdev .s_stream() operation to stop WPF
instances, without a corresponding call to start them. The V4L2 subdev
core started warning about unbalanced .s_stream() calls in commit
009905ec50 ("media: v4l2-subdev: Document and enforce .s_stream()
requirements"), causing a regression with this driver.
Fix the problem by replacing the .s_stream() operation with an explicit
function call for WPF instances. This allows sharing an additional data
structure between RPF and WPF instances.
Fixes: 009905ec50 ("media: v4l2-subdev: Document and enforce .s_stream() requirements")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-media/2221395-6a9b-9527-d697-e76aebc6af@linux-m68k.org/
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----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=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
The Nuvoton NPCM Video Capture/Differentiation Engine (VCD) and Encoding
Compression Engine (ECE) are only present on Nuvoton NPCM SoCs. Hence
add a dependency on ARCH_NPCM, to prevent asking the user about these
drivers when configuring a kernel without Nuvoton NPCM Architecture
support.
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The firmware path for some of the resources is still the old format. This
fixes the path to address the firmware correctly using the new .mbn
format.
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
