PCIe controller 2 has interrupts 0-4 mapping to GIC SPI 138-142. The
mapping for interrupt 1 was incorrectly set to 138 due to a copy-paste
error. Fix it to 139.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260725215722.9323-1-rosenp@gmail.com
Fixes: 3b3e35b279 ("ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL 2.0+ / MIT")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The largest addition here is the revived support for the ZTE ZX
SoC platform, though this mostly documentation.
The other changes are code cleanups that deal with continued
conversion of the GPIO library away from GPIO numbers to
descriptors and a few minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=QOYC
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC code updates from Arnd Bergmann:
"The largest addition here is the revived support for the ZTE ZX SoC
platform, though this mostly documentation.
The other changes are code cleanups that deal with continued
conversion of the GPIO library away from GPIO numbers to descriptors
and a few minor bugfixes"
* tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Axiado reviewer and Maintainers
ARM: remove the last few uses of do_bad_IRQ()
ARM: imx31: Fix IIM mapping leak in revision check
ARM: imx3: Fix CCM node reference leak
ARM: orion5x: update board check in mss2_pci_init() to use the DT
arm: mvebu_v5_defconfig: remove stale MACH_LINKSTATION_LSCHL reference
ARM: mvebu: simplify of_node_put calls
ARM: mvebu: drop unnecessary NULL check
arm: boot: ep93xx: don't rely on machine_is_*() for removed board files
ARM: zte: clean up zx297520v3 doc. warnings
arm64: Kconfig: drop unneeded dependency on OF_GPIO for ARCH_MVEBU
firmware: imx: sm-misc: Make scmi_imx_misc_ctrl_nb variable static
ARM: zte: Add zx297520v3 platform support
ARM: pxa: pxa27x: attach software node to its target GPIO controller
ARM: pxa: pxa25x: attach software node to its target GPIO controller
ARM: pxa: spitz: attach software nodes to their target GPIO controllers
ARM: pxa: statify platform device definitions in spitz board file
ARM: omap2: simplify allocation for omap_device
ARM: select legacy gpiolib interfaces where used
ARM: s3c: use gpio lookup table for LEDs
There are fewer devicetree updates this time that the last few ones, with
five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This brings
back the ZX family of chips that was removed in 2021 after support
for the original zx296702 and zx296718 chips was never completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N (R8A77965)
automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs,
which has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there
are 39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on
an ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A
SoCs from Variscite, Toradex and SolidRun, plus a number of
overlays for combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to
new overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V
SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving hardware
support for the existing boards across vendors (NXP, Qualcomm, Renesas,
Rockchips, Mediatek, ...), a much smaller number of cleanups and warning
fixes have made it in this time.
-----BEGIN PGP SIGNATURE-----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=EhYX
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver [Ethan Nelson-Moore]
- Hercules mdacon console driver [Ethan Nelson-Moore]
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers [Abdun Nihaal]
- many conversions to use strscpy() [David Laight]
- Use named initializers in drivers [Uwe Kleine-König]
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode [Lu Yao]
- modedb: fix a possible UAF in fb_find_mode() [Tuo Li]
- modedb: Fix entry for 1920x1080-60 mode [Steffen Persvold]
- arm: Export acorndata_8x8 font symbol for bootloader [Helge Deller]
- omap2: fix use-after-free in omapfb_mmap [Hongling Zeng]
Cleanups:
- pxa168fb: use devm_ioremap_resource() [AlbertoArostegui]
- provice helpers for fb_set_var() and fb_blank() and fbcon updates [Thomas Zimmermann]
- fbcon: Use correct type for vc_resize() return value [Jiacheng Yu]
- chipsfb: add missing MODULE_DESCRIPTION() macro [Rahman Mahmutović]
- sunxvr2500: replace printk with device-aware logging functions [Rahman Mahmutović]
- sm712: Fix operator precedence in big_swap macro [Li RongQing]
- imxfb: Use of_device_get_match_data() [Rosen Penev]
- atmel_lcdfb: Use of_device_get_match_data() [Rosen Penev]
Documentation fixes:
- grvga: Fix CLUT register address offset in comment [Eduardo Silva]
- omap/dss: Fix stale modedb.c path [Costa Shulyupin]
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment [Ethan Nelson-Moore]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCajAoegAKCRD3ErUQojoP
X9kQAQC7h8nMZ+VZWjmGY3C8UMooNOXSMXv2oAA7IvMwvs5MtQD7BejDK7UQMjyd
xod+t1k6XYzX1j8CDwa7k0qeQaLfvgc=
=Q7dE
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
for 7.2, please pull the following:
- Rosen moves the Meraki MX6X pinctrl configuration to the PWM node
where it belongs, also fixes the USB3 GPIO for the R6300v2 and
EA6500v2 routers
- Jinseok fixes a gpio label for the bcm2711 systems (Raspberry Pi 4)
-----BEGIN PGP SIGNATURE-----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=+Xv1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iAvC
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-7.2/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 7.2, please pull the following:
- Rosen moves the Meraki MX6X pinctrl configuration to the PWM node
where it belongs, also fixes the USB3 GPIO for the R6300v2 and
EA6500v2 routers
- Jinseok fixes a gpio label for the bcm2711 systems (Raspberry Pi 4)
* tag 'arm-soc/for-7.2/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Fix typo in gpio-line-names
ARM: dts: BCM5301X: EA6500v2: fix USB3
ARM: dts: BCM5301X: R6300v2: fix USB3
ARM: dts: NSP: Move MX6X pinctrl config to PWM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The text display code used in the Risc PC kernel image decompression
code uses arch/arm/boot/compressed/font.c, which includes
lib/fonts/font_acorn_8x8.c, which further includes <linux/font.h>.
Since commit 97df896024 ("lib/fonts: Provide helpers for calculating
glyph pitch and size") <linux/font.h> contains inline functions that
require __do_div64, which is not linked into the ARM kernel
decompressor. This makes Risc PC zImages fail to build.
Resolve this issue by defining the BOOTLOADER symbol and use it to avoid
a static declaration of the acorndata_8x8 symbol. That way it can be
referenced by the arm bootloader, and other static math functions and
symbols (like __do_div64) stay static and don't get unneccesary included
in the ARM kernel bootloader decompressor object file.
Fixes: 97df896024 ("lib/fonts: Provide helpers for calculating glyph pitch and size")
Reported-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
MIPI CSI-2 is supported on the A83T with a dedicated controller that
covers both the protocol and D-PHY. It is connected to the only CSI
receiver with a fwnode graph link. Note that the CSI receiver supports
both this MIPI CSI-2 source and a parallel source.
An empty port with a label for the MIPI CSI-2 sensor input is also
defined for convenience.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260518153339.619947-8-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
New platforms:
- Rainiera6 (Meta)
- SanMiguel (Meta)
Updated platforms:
- Anacapa: SGPIO line names and interrupt configuration
- Clemente: Remove TMP421 nodes
- Kommando: Enable networking via MAC2/MDIO2
- SanMiguel: Line names and interrupt configuration
AST2600 SoC updates:
- Describe PWM/Tach
- Describe I3C controllers
- Reorganise I2C nodes
Other notes:
91b9aed738 ("ARM: dts: aspeed-g6: Add nodes for i3c controllers") currently
causes a new warning:
... /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
The patch necessary to address it has an R-b tag from Kryzsztof[2] but as best
I can tell is yet to be applied to the MFD tree. I've left the change in for now
as the warning will resolve once the binding patch is applied.
Lastly, as part of improving support for the Kommando card Anirudh has also
addressed[1] the persistent pain we've had with the phy-mode property for the
AST2600 MACs. Thanks to Andrew Lunn for being on the case for a while now, and
for those who tested Anirudh's patch.
[1]: https://lore.kernel.org/all/20260525-asus-kommando-v3-0-e6a0ca1b4a3e@gmail.com/
[2]: https://lore.kernel.org/all/20260425-poised-accomplished-hyena-d2c1a0@quoll/
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCah+R1RwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmREgA/jRNiutECMQIXr4y3K33
+c4oHhcUvdGb+xgGCsI6aQ/zAQCrmJet9FHLCcNOnklh1Ob+jpl4U+nMow1lzUn/
2COBCA==
=eDXl
-----END PGP SIGNATURE-----
Merge tag 'aspeed-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
aspeed: First batch of ARM devicetree changes for v7.2
New platforms:
- Rainiera6 (Meta)
- SanMiguel (Meta)
Updated platforms:
- Anacapa: SGPIO line names and interrupt configuration
- Clemente: Remove TMP421 nodes
- Kommando: Enable networking via MAC2/MDIO2
- SanMiguel: Line names and interrupt configuration
AST2600 SoC updates:
- Describe PWM/Tach
- Describe I3C controllers
- Reorganise I2C nodes
Other notes:
91b9aed738 ("ARM: dts: aspeed-g6: Add nodes for i3c controllers") currently
causes a new warning:
... /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
The patch necessary to address it has an R-b tag from Kryzsztof[2] but as best
I can tell is yet to be applied to the MFD tree. I've left the change in for now
as the warning will resolve once the binding patch is applied.
Lastly, as part of improving support for the Kommando card Anirudh has also
addressed[1] the persistent pain we've had with the phy-mode property for the
AST2600 MACs. Thanks to Andrew Lunn for being on the case for a while now, and
for those who tested Anirudh's patch.
[1]: https://lore.kernel.org/all/20260525-asus-kommando-v3-0-e6a0ca1b4a3e@gmail.com/
[2]: https://lore.kernel.org/all/20260425-poised-accomplished-hyena-d2c1a0@quoll/
* tag 'aspeed-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: sanmiguel: Fix the CPU_CHIPTHROT linename
ARM: dts: aspeed: sanmiguel: Add IOEXP interrupt pin settings
ARM: dts: aspeed: clemente: Remove IOB NIC TMP421 nodes
ARM: dts: aspeed: Enable networking for Asus Kommando IPMI Card
ARM: dts: aspeed: rainiera6: Add Meta Rainiera6 BMC
dt-bindings: arm: aspeed: Add Meta Rainiera6 board
ARM: dts: aspeed: anacapa: Correct SGPIO names for monitoring
ARM: dts: aspeed: Add Meta SanMiguel BMC
dt-bindings: arm: aspeed: add Meta SanMiguel BMC
ARM: dts: aspeed: g6: Add PWM/Tach controller node
ARM: dts: aspeed: yosemite5: Add MP5998 power monitor
ARM: dts: aspeed: anacapa: Add interrupt properties for PDB PCA9555
ARM: dts: aspeed: msx4: enable BMC networking via MAC0
ARM: dts: aspeed: anacapa: Add JTAG CPLD TRST pin to SGPIO map
ARM: dts: aspeed-g6: Add nodes for i3c controllers
ARM: dts: aspeed-g6: move i2c controllers directly into apb node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This adds support for the ARMv7 Timer node in the MT6589 SoC
and performs a couple of dtbs_check fixes in MT7623 and in
MT8135 devicetrees.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCahVw0xsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeOfgAQDkoxPtOpgCxE15pQJBSQO1wyYAREDX
k2uMGtcFptK8jAD/awEIME5N3++HtSN+IEFsJwkj7vcdo/H+ZNVBgUyuDwk=
=UxIz
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts32-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 DeviceTree updates
This adds support for the ARMv7 Timer node in the MT6589 SoC
and performs a couple of dtbs_check fixes in MT7623 and in
MT8135 devicetrees.
* tag 'mtk-dts32-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm: dts: mediatek: mt8135: fix pinctrl node name
arm: dts: mediatek: mt7623: fix pinctrl controller node name
arm: dts: mediatek: mt7623: fix pinctrl child node names
arm: dts: mediatek: mt6589: Add Arm Generic Timer node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
-----BEGIN PGP SIGNATURE-----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=fuTI
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v7.2
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
* tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: arria10: Increase JFFS2 rootfs partition size
dt-bindings: altera: add compatible for agilex5 socdk debug daughter card
arm64: dts: socfpga: agilex5: Fix phy-mode to rgmii as HW provides clock delay
arm64: dts: socfpga: agilex5: update data-width for dmac
arm64: dts: socfpga: agilex3: set alias for i3c controller
arm64: dts: socfpga: agilex5: set alias for i3c controllers
ARM: dts: socfpga: remove the reg property in the pmu
arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
dt-bindings: arm: altera: document the Agilex7-M devkit
Signed-off-by: Linus Walleij <linusw@kernel.org>
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
-----BEGIN PGP SIGNATURE-----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=yQew
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v7.2-rc1
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
* tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf600t: Invert accelerometer calibration matrix
ARM: tegra: tf600t: Drop backlight regulator
ARM: tegra: tf600t: Configure panel
ARM: tegra: transformers: Add connector node for common trees
ARM: tegra: transformer: Add support for front camera
ARM: tegra: grouper: Add support for front camera
ARM: tegra: p880: Lower CPU thermal limit
ARM: tegra: lg-x3: Set PMIC's RTC address
ARM: tegra: lg-x3: Complete video device graph
ARM: tegra: Configure Tegra114 power domains
ARM: tegra: Add DC interconnections for Tegra114
ARM: tegra: Add EMC OPP and ICC properties to Tegra114 EMC and ACTMON device-tree nodes
ARM: tegra: Add #{address,size}-cells to Chromium-based /firmware
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Add two new devices: the Verbatim Gigabit NAS and the
Raidsonic IB-4210-B, including ACKed binding updates.
- Fix up boot device for the SQ201.
- Use the right LED trigger for disk activity.
- Add the SSP/SPI block to the SoC.
- Fix up the RUT1xx device tree.
-----BEGIN PGP SIGNATURE-----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=RQ6n
-----END PGP SIGNATURE-----
Merge tag 'gemini-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini device tree updates:
- Add two new devices: the Verbatim Gigabit NAS and the
Raidsonic IB-4210-B, including ACKed binding updates.
- Fix up boot device for the SQ201.
- Use the right LED trigger for disk activity.
- Add the SSP/SPI block to the SoC.
- Fix up the RUT1xx device tree.
* tag 'gemini-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Correct the RUT1xx
ARM: dts: Add a Raidsonic IB-4210-B DTS
ARM: dts: Add a Verbatim Gigabit NAS DTS
dt-bindings: arm: Add two missing Gemini devices
dt-bindings: vendor-prefixes: Add Verbatim Corporation
ARM: dts: gemini: Add SSP/SPI block
ARM: dts: gemini: Tag disk led for disk-activity
ARM: dts: gemini: iTian SQ201 need to boot from mtdblock3
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the bootph-all property to ULP watchdog nodes for i.MX7ULP, ensuring
the watchdog is available during all boot phases.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Following the previous set of fixes, this addresses another significant
number of small issues found in firmware drivers (tee, optee, qcomtee,
qcom ice, exynos acpm) drivers through various tools. This is about
error handling, resource leaks, concurrency and a use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller,
the i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing
mostly minor configuration mistakes
-----BEGIN PGP SIGNATURE-----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=uqVQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
TQMa7 has board-information located in EEPROM at offset 0x20.
Add necessary nodes and properties for nvmem cell.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add OV5645 camera device node and enable relevant components in the
video capture data path, so output stream can be captured, and the
camera itself can be controlled over I2C bus.
This is roughly based on descriptions found in downstream kernel tree [1],
adapted to match upstream bindings.
Link: ce8fd74abf/arch/arm/boot/dts/imx7d-pico.dtsi (L874) [1]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Replace the vendor-specific PHY compatible string with the generic
ethernet-phy-ieee802.3-c22 compatible.
The marvell,88E1510 compatible is listed in whitelist_phys[] and is
never matched against a PHY driver. PHY devices are expected to use
the generic ethernet-phy-ieee802.3-c22 compatible unless a specific
MDIO driver match is required.
The 88E1510 is compatible with Clause 22 PHY devices, so use the
generic compatible string instead.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dtb: /soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@0: failed to match any schema with compatible: ['marvell,88E1510']
Known other user (uboot) did not use marvell,88E1510.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The edt,edt-ft5x06 compatible is not referenced in
drivers/input/touchscreen/edt-ft5x06.c and is not documented.
There is no publicly available datasheet or binding information that
distinguishes edt-ft5206/ft5306/ft5406 variants and the driver treats these
FT5x06-family controllers with the same configuration model. So switch to
the lowest common and documented baseline compatible edt,edt-ft5206.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: /soc/bus@60000000/i2c@63fc8000/touchscreen@38: failed to match any schema with compatible: ['edt,edt-ft5x06']
ABI impact consideration:
Not affect Linux kernel. The I2C subsystem uses a legacy fallback mechanism
where it strips the vendor prefix from the compatible string to derive the
client name, resulting in edt-ft5x06
{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
After this, the driver was actively binding to these devices based on the
compatible string.
Known user (U-Boot) does not parse or use edt,edt-ft* touchscreen
compatibles.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove the undocumented and unused compatible karo,imx6qdl-tx6-sgtl5000 and
retain only the generic simple-audio-card sound configuration.
The karo,imx6qdl-tx6-sgtl5000 compatible is not documented and is not
referenced by any in-kernel driver. The audio setup is already fully
described using simple-audio-card, which is the standard and supported
binding for this hardware configuration.
No known users (such as uboot) rely on karo,imx6qdl-tx6-sgtl5000.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dtb: /sound: failed to match any schema with compatible: ['karo,imx6qdl-tx6-sgtl5000', 'simple-audio-card']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add bus-type (MEDIA_BUS_TYPE_PARALLEL) for ov5642/ov5640. i.MX53 and
i.MX6UL only supports parallel csi interface. Fix below CHECK_DTBS
warnings:
arm/boot/dts/nxp/imx/imx53-smd.dtb: ov5642@3c (ovti,ov5642): port:endpoint: 'bus-type' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove redundant bus-width property according to video-mux.yaml to fix
below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ipu1_csi0_mux (video-mux): port@4:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/video-mux.yaml
The bus-width already set at remote endpoint (camera).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add required power-supply and vdd-supply properties to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: panel (edt,etm0700g0dh6): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add '#phy-cells' for usb-nop-xceiv to fix below check_dtbs warnings:
usbphy-2 (usb-nop-xceiv): '#phy-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add dvdd and avdd supply and regulators for panel sii,43wvf1g to fix below
check_dtbs warnings:
panel (sii,43wvf1g): 'dvdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add required proprety ti,deskew for ti,tfp410, which have not defined
default value in yaml. 0 is default value according to
drivers/gpu/drm/bridge/ti-tfp410.c.
Fix below check_dtbs warning:
dvi-encoder (ti,tfp410): 'ti,deskew' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The Technologic Systems TS-4800 watchdog node was previously named 'wdt',
which violates the core watchdog.yaml schema expecting generic node names.
Rename the node to 'watchdog' to fix the following dtbs_check warning:
'wdt' does not match '^(pmic|timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This update includes:
- a fix for the GMAC DT node on SAM9X7 SoC to properly describe the
available clocks
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCahxHEwAKCRCejrg/N2X7
/aZcAP9W2CfnPGFuBHoT4DR3NLDcqgt0p6hni2RpV3P+ELK1NgEAqIYlIyf0RXbV
j4TU9cbq6Z7iXb2hsMjF1gebKj1V6QU=
=Z26Y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xRm6
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v7.1
This update includes:
- a fix for the GMAC DT node on SAM9X7 SoC to properly describe the
available clocks
* tag 'at91-fixes-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IMU calibration matrix used in the device tree is inverted when testing on
the device which results in wrong screen orientation. Invert it to match
the matrix dumped from the device.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drop dedicated backlight regulator since the GPIO used in it is actually
SFIO controlling backlight and setting it as GPIO causes backlight to
freeze at maximum level.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All ASUS Transformers have micro-HDMI connector directly available. After
Tegra HDMI got bridge/connector support, we should use connector framework
for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add front camera video path. Aptina MI1040 camera is used on all supported
ASUS Transformers, but only TF201 and TF700T will work since on
TF300T/TG/TL front camera is linked through an additional ISP.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Lower the CPU thermal limit for the LG P880, since its chassis has less
thermal dissipation capability than the P895.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
LG X3 devices have the PMIC's RTC module located at a non-standard
address. Set the correct address.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add front and rear camera nodes and interlink them with Tegra CSI and VI.
Adjust camera PMIC voltages to better fit requirements and fix the focuser
node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Code in misc-ep93xx.h relies on machine_is_*() macros for several
boards that no longer have legacy board files. They were removed in
commit e5ef574dda ("ARM: ep93xx: delete all boardfiles"). This
prevents the removal of machine IDs no longer used by the kernel from
mach-types. To resolve this issue, create local copies of these macros.
(The checks themselves are still valid because the IDs are still passed
in by the bootloader on these machines.) Also take the opportunity to
remove three repeated checks for the same ID.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <asv@kernel.org>
