* New drivers for the following chips
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
* New chip support added to existing drivers
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX B850-E
GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
* New functionality
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks,
and use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input support
as well as voltage domain IDs
mcp9982: Add support for reporting external diode faults
* Miscellaneous bug fixes, changes and improvements
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition between
device removal and sysfs access, upgrade log level from warn to err for
platform device creation failure, initialize EC before registering hwmon
device, drop global driver data and use per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema
-----BEGIN PGP SIGNATURE-----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=mDMd
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify indention and usage of commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/65b77bcd452752c36d866069cc5790b26d2bf8dc.1778688803.git.u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some systems require fans to enter in a defined safe state during system
shutdown or reboot handoff.
Add support for the optional Device Tree property "fan-shutdown-percent"
to configure the shutdown PWM duty cycle per fan output.
If the property is present for a fan channel, the driver converts the
configured percentage value to the corresponding PWM duty cycle and
applies it during driver shutdown.
If the property is not present, the fan state remains unchanged.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-4-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The fan channel index is used to access per-channel data structures.
Validate the index against the number of available channels
before use to prevent out-of-bounds access if an invalid
value is provided.
The thermal registration path currently uses a sequential child index,
which may not match the validated channel from DT. Use the DT "reg"
property when registering cooling devices to ensure consistent
channel handling
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-2-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
To clarify that the function operates on child nodes, rename:
devm_thermal_of_cooling_device_register()
|
v
devm_thermal_of_child_cooling_device_register()
Used the command:
find . -type f -name '*.[ch]' -exec \
sed -i 's/devm_thermal_of_cooling_device_register/\
devm_thermal_of_child_cooling_device_register/g' {} \;
Did not used clang-format-diff because it does not indent correctly
and checkpatch complained. Manually reindented to make checkpatch
happy
This prepares for upcoming support of cooling devices identified by
an ID rather than device tree child nodes.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-18-daniel.lezcano@oss.qualcomm.com
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In emc2305_of_parse_pwm_child, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_738BA80BBF28F3440301EEE6F9E470165105@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The for_each_child_of_node() macro automatically manages device node
reference counts during normal iteration. However, when breaking out
of the loop early with return, the current iteration's node is not
automatically released, leading to a reference count leak.
Fix this by adding of_node_put(child) before returning from the loop
when emc2305_set_single_tz() fails.
This issue could lead to memory leaks over multiple probe cycles.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_5CDC08544C901D5ECA270573D5AEE3117108@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
./drivers/hwmon/emc2305.c:597:4-15: ERROR: probable double put
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_CD373F952BE48697C949E39CB5EB77841D06@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Prevent the PWM value from being set to minimum when thermal zone
temperature exceeds any trip point during driver probe. Otherwise, the
PWM fan speed will remains at minimum speed and not respond to
temperature changes.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20250603113125.3175103-5-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add three new attributes to the driver data structures to support
configuration of PWM frequency, PWM polarity and PWM output config.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20250603113125.3175103-2-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Prepare the emc2305 driver to use configuration from Device Tree nodes.
Switch to devm_thermal_of_cooling_device_register to simplify the
cleanup procedure, allowing the removal of emc2305_unset_tz and
emc2305_remove, which are no longer needed.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250321143308.4008623-4-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list both
to be set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if the driver
doesn't implement detect().
Class-based probing is a legacy mechanism, in addition apparently
nobody ever noticed that class-based probing has been non-functional
in both drivers from the very beginning. So drop the fragments of
class-based probing support.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de
[groeck: Added missing change in pmbus/acbel-fsg032.c]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix kernel-doc warnings:
drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device;
on line 62 - I thought it was a doc line
drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client;
on line 89 - I thought it was a doc line
and drop ';' at end of each struct member line.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20230113064540.20179-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'emc2305_cdev_data', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem, and the driver author hopes
that if the state set by 'hwmon' is lower than the value set by 'thermal',
the driver will just save it without actually setting the pwm. Currently,
the 'last_thermal_state' also be updated by 'hwmon', which will cause the
cooling state to never be set to a lower value. This patch fixes that.
Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-2-nanpuyue@gmail.com
Fixes: 0d8400c5a2 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
[groeck: renamed emc2305_set_cur_state_shim -> __emc2305_set_cur_state]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The definitions of 'EMC2305_REG_PRODUCT_ID' and 'EMC2305_REG_DEVICE' are
both '0xfd', they actually return the same value, but the values returned
by emc2301/2/3/5 are different, so probe emc2301/2/3 will fail, This patch
fixes that.
Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-1-nanpuyue@gmail.com
Fixes: 0d8400c5a2 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.
This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,
/*
* When there are no more users of probe(),
* rename probe_new to probe.
*/
if (driver->probe_new)
status = driver->probe_new(client);
else if (driver->probe)
status = driver->probe(client,
i2c_match_id(driver->id_table, client));
else
status = -EINVAL;
Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).
This change was done using the following Coccinelle script, and fixed
up for whitespace changes:
@ rule1 @
identifier fn;
identifier client, id;
@@
- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}
@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@
struct i2c_driver driver = {
- .probe
+ .probe_new
=
(
fn
|
- &fn
+ fn
)
,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20221011143309.3141267-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* New drivers
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
* Removed drivers
- Drop obsolete asus_wmi_ec_sensors driver
* Cleanups, affecting various drivers
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
* Other notable cleanup and improvements
- Support for additional USB devide ID and support for reporting
of rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device revision
* Various other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=8u0w
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
Removed drivers:
- Drop obsolete asus_wmi_ec_sensors driver
Cleanups, affecting various drivers:
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
Other notable cleanup and improvements:
- Support for additional USB devide ID and support for reporting of
rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next
driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device
revision
And various other minor fixes and cleanups"
* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
Static analyzers report:
drivers/hwmon/emc2305.c:194 emc2305_set_cur_state()
warn: impossible condition '(val > 255) => (0-255 > 255)'
'val' is u8 and thus can never be larger than 255. In theory
the operation calculating 'val' could result in a value larger
than 255, but this won't happen because its parameter has already
been range checked and it is guaranteed that the result never exceeds
255. Remove the unnecessary value check.
Cc: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.
Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based
PWM Fan Speed Controller.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com
[groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>