OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs and are private to GPIOLIB anyway so there's
really no reason to select it explicitly.
Link: https://patch.msgid.link/20260506082211.5624-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Remove dev_err() call after dma_alloc_coherent() failure.
checkpatch.pl reports this as an unnecessary out-of-memory message because
failure is already conveyed by returning -ENOMEM, and the current message
does not provide additional useful debugging information.
Signed-off-by: Shyam Sunder Reddy Padira <shyamsunderreddypadira@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The media_pad_is_streaming() helper is explicitly intended to check whether
a pad has been started with media_pipeline_start(). Use it instead of
relying on the implicit assumption that a pad with a pipeline is streaming.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
entity->pads is an array that contains all the pads of an entity.
Calling __media_pipeline_start() or __media_pipeline_stop() on the pads,
implicitly starts the pipeline with the first pad in this array as origin.
Explicitly use the first pad to start the pipeline to make this more
obvious to the reader.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The imx-media driver has a single imx_media_device. Attaching the
media_pipeline to the imx_media_device prevents the execution of multiple
media pipelines on the device. This should be possible as long as the
media_pipelines don't use the same pads or pads that be configured while
the other media pipeline is streaming.
Move the media_pipeline to the imx_media_video_dev to be able to construct
media pipelines per imx capture device.
If different media pipelines in the media device conflict, the validation
will fail. Thus, the pipeline will fail to start and signal an error to
user space.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
cedrus_probe() initializes the media device before registering the video
device, the media controller, and the media device. If any of those later
steps fails, probe returns without calling media_device_cleanup(), so the
media device internals initialized by media_device_init() are left behind.
Add a media-device cleanup label to the probe unwind path and route video
registration failures through it as well.
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Cc: stable@vger.kernel.org
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert manual kmalloc() multiplications to the modern kmalloc_objs()
interface to improve type safety and prevent potential integer
overflows.
Signed-off-by: Pedro Pontes <pontescpedro@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Remove unused code blocks enclosed in #if 0 to clean up the code.
Signed-off-by: Taekyung Oh <ohxorud@ohxorud.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix coding style warnings reported by checkpatch.pl.
Move the comments above the corresponding code lines to align with guideline.
Signed-off-by: Taekyung Oh <ohxorud@ohxorud.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace msleep(5) with fsleep(5000) to avoid sleeping longer than
necessary. msleep() with values less than 20ms may sleep for up to
20ms due to timer granularity. fsleep() selects the appropriate sleep
function automatically.
Signed-off-by: Oskar Ray-Frayssinet <rayfraytech@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
There are memory leaks in
drivers/staging/media/atomisp/pci/atomisp_compat_css20.c.
In atomisp_css_allocate_stat_buffers(), s3a_map is allocated by
ia_css_isp_3a_statistics_map_allocate() and its backing memory is
mapped via hmm_vmap(). When dis_buf allocation fails, the error path
frees s3a_data but does not unmap or free s3a_map. Similarly, when
md_buf allocation fails, neither s3a_map nor dvs_map (and their hmm
vmaps) are freed.
Add the missing hmm_vunmap() and map free calls on both error paths,
matching the cleanup order used in atomisp_css_free_3a_buffer() and
atomisp_css_free_dis_buffer().
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch errors "ERROR: trailing statements should be on next line"
in drivers/staging/media/atomisp/pci/sh_css_params.c.
Signed-off-by: Timo Röhling <roehling@debian.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix inconsistent tab/space usage and bring function definitions
into a single-line format, matching kernel coding style.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Improve readability by using designated initializer for
default_anr_config.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix inconsistent tab/space usage and bring function definitions
into a single-line format, matching kernel coding style.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Move kernel-doc comment for strength field in
ia_css_aa_config from inline to structure-level comment
for better readability and tooling compatibility.
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl warning on useless return on the end of the void
function.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Clean up coding style whitespace issues
in drivers/staging/media/atomisp/pci/hive_isp_css_common/host/gdc.c.
Fixes include:
- removal of unnecessary line breaks
- correcting spacing around operators
- correcting spaces between types and names
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Use string_choices.h helpers instead of hard-coded strings.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace open-coded width * height * sizeof() multiplications with
array3_size() to prevent integer overflow in buffer allocations.
The atomisp driver computes DVS, morphing table, shading table and
statistics buffer sizes using unchecked arithmetic. When dimensions
are attacker-controlled or simply large, the product can silently wrap,
causing kvmalloc() to allocate an undersized buffer.
array3_size() saturates to SIZE_MAX on overflow, so kvmalloc() returns
NULL instead of succeeding with too few bytes.
Signed-off-by: Feng Ning <feng@innora.ai>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace hardcoded function name string with __func__ macro in
dev_dbg call as recommended by kernel coding style.
Signed-off-by: Oskar Ray-Frayssinet <rayfraytech@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Remove unnecessary else clause after return statement as the else
branch is not needed when the if branch always returns.
Signed-off-by: Oskar Ray-Frayssinet <rayfraytech@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace the open-coded multiplication in kmalloc() with kmalloc_array()
to provide overflow protection and improve code readability.
Signed-off-by: Lin YuChen <starpt.official@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Drop unnecessary casts when accessing vma->vm_private_data.
No functional change.
Signed-off-by: Zile Xiong <xiongzile99@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The load_primary_binaries() function is overly complex and has som large
variables on the stack, which can cause warnings depending on CONFIG_FRAME_WARN
setting:
drivers/staging/media/atomisp/pci/sh_css.c: In function 'load_primary_binaries':
drivers/staging/media/atomisp/pci/sh_css.c:5260:1: error: the frame size of 1560 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Half of the stack usage is for the prim_descr[] array, but only one
member of the array is used at any given time.
Reduce the stack usage by turning the array into a single structure.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Remove the 'assert(entry)' call. In the atomisp driver, assert() is a
wrapper around BUG(), which intentionally crashes the entire kernel.
This is dangerous and inappropriate for a simple null pointer check
during stream teardown. Replace it with a safe 'if (!entry) continue;'
check.
Change the early 'return' to a 'continue'. In a destruction
path, it is better to proceed with cleaning up as many resources as
possible rather than aborting early, which would result in memory leaks
for the remaining pipes.
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
To reduce indentation and improve the readability of
ia_css_stream_destroy(), extract the ISP2401-specific cleanup block into
a new static helper function, ia_css_stream_destroy_isp2401().
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The nested loop inside the IS_ISP2401 block incorrectly uses the same
variable 'i' as the outer loop. This shadows the outer loop variable
and causes premature termination or skipped array elements.
Change the inner loop to use a new variable 'j' to prevent this.
Fixes: 113401c673 ("media: atomisp: sh_css: Removed #ifdef ISP2401 to make code generic")
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace open-coded ternary min expressions with umin() in
strscpy() calls, as suggested by Dan Carpenter.
Signed-off-by: Michael Ugrin <mugrinphoto@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
gmin_cfg_get_dsm() iterates over ACPI _DSM package elements as
key/value pairs using obj->package.count - 1 as the loop bound.
If package.count is 0, the subtraction underflows and may lead
to out-of-bounds access.
Use i + 1 < obj->package.count instead.
Signed-off-by: Mohamad El Harake <mohamedharake2006@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The function configure_isp_from_args() contained a duplicate call to
ia_css_output0_configure() using the same output frame index. Remove the
redundant call to simplify the configuration path.
The ia_css_output0_configure() function acts as a configuration setter.
It populates a struct ia_css_output0_configuration from the frame info
and caches it in the binary parameters. Calling it twice with the same
out_frame[0] pointer merely overwrites the exact same state with
identical values. It has no cumulative state, neither does its order
matter relative to ia_css_copy_output_configure().
ia_css_configure_output0() writes into binary->mem_params.params[], a
software-side DMEM parameter buffer in kernel memory. The ISP firmware
receives these parameters later as a batch, not at the time of the call.
Calling a pure memory write twice with the same pointer and same value
simply overwrites the same location with identical data, there is no
hardware interaction that could require repetition.
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The FIXME comment noted that delay_frames can be NULL for certain
pipeline configurations, without knowing why. The reason is that when a
binary does not enable ref_frame, delay frame allocation is
intentionally skipped to save memory, leaving the pointers NULL by
design.
The ISP feature flags in binary->info->sp.enable accurately reflect
which features are active for a given binary. Using enable.ref_frame and
enable.tnr as the predicate for their respective configuration steps
ensures the configuration path stays in sync with what was actually
built into the pipeline
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Merge declaration of const GP_TIMER_BASE split across 2 lines to improve
readability.
Signed-off-by: Anushka Badhe <anushkabadhe@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace usage of uint32_t with u32 to comply with kernel coding
style guidelines.
Reported by checkpatch.pl.
CHECK: Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The struct ia_css_region definition is redundant as struct v4l2_rect
provides the same functionality (left, top, width, height) and is the
standard V4L2 type.
Replace usage of ia_css_region with v4l2_rect in ia_css_dz_config
and remove the definition of ia_css_region from ia_css_types.h.
Also remove historical comments referencing the addition of zoom_region
and include <linux/videodev2.h> to support the v4l2_rect type.
Signed-off-by: Karthikey Kadati <karthikey3608@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl warnings in sh_css_param_shading.c regarding block
comment formatting.
The warning was:
- Block comments use a trailing */ on a separate line
This change also moves text from the first line of block comments to
subsequent lines to adhere to the standard Linux kernel coding style.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Existing comments in mmu_public.h used Doxygen syntax and had
inconsistent formatting.
Convert the function documentation to the standard kernel-doc format to
adhere to the Linux kernel coding style.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The function mmu_get_page_table_base_index() accepts only one argument
mmu_ID_t, the block comment for it shows an erroneous additional
argument base_index[in]. Similarly, mmu_reg_load() only accepts two
arguments, however the block comment explaining it shows an erroneous
argument 'value[in]'.
Remove incorrect documentation lines.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl warnings regarding block comments.
Add missing asterisks to block comments to adhere to the kernel coding
style.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl warnings regarding lines ending with "(" and improper
spacing for indentation.
This change fixes the function signatures for both function prototypes
and static inline function definations in mmu_public.h.
The kernel coding style prefers arguments to start immediately after
the open parenthesis.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The function mmu_reg_store() returns void. The final return
statement is redundant as it is followed by the closing brace.
Remove the redundant return statement to simplify code and adhere to
kernel coding style.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Systems with the atomisp ISP do not have a lot of memory for modern
standards, so these are often under memory pressure and alloc_pages_bulk()
does not try very hard to free pages before returning an amount of pages
which is less then requested. This leads to streaming from the camera
often failing with a "alloc_pages_bulk() failed" error.
vmalloc() also uses alloc_pages_bulk(), but falls back to allocating one
page at a time when that fails.
Do the same in alloc_private_pages() to avoid these errors.
While at it also drop the weird custom GFP flags and just use GFP_KERNEL
and drop the dev_err() as alloc_pages() already complaints loudly if
it fails itself.
Closes: https://github.com/jfwells/linux-asus-t100ta/issues/4
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
atomisp_v4l2_framebuffer_to_css_frame() allocates memory for
temporary variable raw_black_frame, which must be released via
ia_css_frame_free() before the function returns. However, if
sh_css_set_black_frame() fails, the function returns immediately without
performing this cleanup, leading to a memory leak.
Fix this by assigning the return value of sh_css_set_black_frame() to
ret. This ensures that the error code is propagated while allowing the
execution to fall through to the ia_css_frame_free() cleanup call.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is based on the
LLVM framework and is specifically designed to detect memory management
issues. It is currently under active development and not yet publicly
available.
We performed build testing on x86_64 with allyesconfig. Since triggering
this error path in atomisp requires specific Intel Atom ISP hardware and
firmware, we were unable to perform runtime testing and instead verified
the fix according to the code logic.
Fixes: 85b606e02a ("media: atomisp: get rid of a bunch of other wrappers")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Remove redundant 'return;' at the end of void function
ia_css_dvs_statistics_get(). Void functions do not need an explicit
return statement at the end. No other occurrences in this file.
Found with checkpatch.pl --strict.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
