- Update MAINTAINERS, CREDITS and ACPI subsystem documentation to
reflect recent changes in the upstream ACPICA project (Rafael
Wysocki)
- Prevent the core ACPI enumeration code from combining device
resources that overlap completely in order to avoid resource
conflicts during platform device registration because there are
drivers that expect such resources to be present (Rafael Wysocki)
- Defer device power initialization during ACPI-based device
enumeration to the point when the given device is known to be present
and functional and all of its dependencies have been met (Peixin Xie)
- Fix bus ID cleanup on device_add() failures during ACPI device object
registration (Hongyan Xu)
- Introduce a new helper function for looking up the primary "physical"
device for a given ACPI device object and update the core ACPI device
enumeration code to use that function (Rafael Wysocki)
- Protect all battery properties with a separated mutex in the ACPI
battery driver to prevent race conditions from occurring and avoid
evaluating the _BST ACPI control method multiple times in parallel
for the same battery device (Rong Zhang)
- Add DMI quirk for the Razer Blade Pro 17 early 2020 lid switch to the
ACPI button driver (Robin Everaars)
- Convert fixed clock rates in the ACPI driver for AMD SoCs (APD) to
use HZ_PER_MHZ and add a clock frequency for the HJMC01 I2C
controller to it (Hongnan Li and Xiangyang Yu)
- Fix a stack buffer overflow in query_capability() in the ACPI
platform firmware runtime update driver (Anirudh Prasad)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmqPL0oSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1RrYH/AgB9tvwsenlB1jp2JxOqZhzuaKezH66
wRAddLVPg4Goc6XV6EUFZZi47PpAbgUPvRFhxBXu8oxY4W9g8Ak3BKxAefcjH2Gh
WhGxAo51Be/4PskO47e29CUf1pWlMD9QeffIxBFqB5uqJ48/E2WDdstsR8tUazKL
6n7APE9udaL/xNAvGvgXEmhrj6hdhMhQfiQISOrcHGtbNd1AIsVrfC4BRi/qCjdv
s385YtkAtY0xgfu3s6HmjtUQxJ0Isse5dhgDCC5cb05pFxItPqmCPgUY8VYCWqml
07EfplwaOBBv9IxAuBTyB9gl7E/WDxg9cVTPy6Hm2TZ9PeIFXK2NvI4=
=Jtbh
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI support updates from Rafael Wysocki:
"These update documentation to reflect recent changes in the upstream
ACPICA project, fix issues in the core ACPI device enumeration code
(one of which has been introduced recently), improve the primary
"physical" device lookup for ACPI device objects in that code, and
update ACPI device drivers:
- Update MAINTAINERS, CREDITS and ACPI subsystem documentation to
reflect recent changes in the upstream ACPICA project (Rafael
Wysocki)
- Prevent the core ACPI enumeration code from combining device
resources that overlap completely in order to avoid resource
conflicts during platform device registration because there are
drivers that expect such resources to be present (Rafael Wysocki)
- Defer device power initialization during ACPI-based device
enumeration to the point when the given device is known to be
present and functional and all of its dependencies have been met
(Peixin Xie)
- Fix bus ID cleanup on device_add() failures during ACPI device
object registration (Hongyan Xu)
- Introduce a new helper function for looking up the primary
"physical" device for a given ACPI device object and update the
core ACPI device enumeration code to use that function (Rafael
Wysocki)
- Protect all battery properties with a separated mutex in the ACPI
battery driver to prevent race conditions from occurring and avoid
evaluating the _BST ACPI control method multiple times in parallel
for the same battery device (Rong Zhang)
- Add DMI quirk for the Razer Blade Pro 17 early 2020 lid switch to
the ACPI button driver (Robin Everaars)
- Convert fixed clock rates in the ACPI driver for AMD SoCs (APD) to
use HZ_PER_MHZ and add a clock frequency for the HJMC01 I2C
controller to it (Hongnan Li and Xiangyang Yu)
- Fix a stack buffer overflow in query_capability() in the ACPI
platform firmware runtime update driver (Anirudh Prasad)"
* tag 'acpi-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Add DMI quirk for Razer Blade Pro 17 early 2020 lid switch
ACPI: scan: Do not combine resources that overlap completely
ACPI: Update upstream ACPICA repository URL in documentation
ACPI: Update MAINTAINERS entry for ACPICA
ACPI: Add Bob Moore to CREDITS
ACPI: pfr_update: fix stack buffer overflow in query_capability()
ACPI: scan: Defer device power initialization
ACPI: APD: Add clock frequency for HJMC01 I2C controller
ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ
ACPI: scan: Use acpi_bus_get_primary_device()
ACPI: platform: Use acpi_bus_get_primary_device()
ACPI: bus: Introduce acpi_bus_get_primary_device()
ACPI: scan: fix bus ID cleanup on device_add() failures
ACPI: battery: Protect all properties with a separated mutex
- container_of:
- Apply typeof_member(), remove the local __mptr variable to eliminate
variable shadowing warnings on nested container_of() calls, and remove
unnecessary parentheses.
- core:
- Add driver name to probe debug print for initcall_debug.
- Avoid repeatedly printing the same 'Fixed dependency cycle' log.
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device().
- Remove statistics group if encryption group creation fails in
transport_add_class_device().
- debugfs:
- Fix lockdown check for mmap_prepare().
- Warn if file creation failed due to uninitialized debugfs.
- device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from DEV_PROP_REF
properties to enable automatic probe ordering. Add kunit-managed fwnode
helpers and test coverage.
- Fix infinite loop in fwnode_for_each_child_node() when the secondary fwnode
has more than one child. Add test cases.
- Fix out-of-bounds access in software_node_get_reference_args() when called
with index -1 (UINT_MAX).
- Refactor to use RAII approach with __free().
- Add Bartosz Golaszewski as software node reviewer.
- firmware loader:
- Fix race where a sysfs fallback request can complete before being queued as
pending, leading to a use-after-free on the next fallback request.
- Reject 0-size built-in firmware and fail the build on empty firmware files
in CONFIG_EXTRA_FIRMWARE.
- kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros and
allow the constification of kobject attributes, enabling them to reside in
read-only memory.
- platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(), and
platform_device_set_of_node_from_dev() helpers that encapsulate firmware
node reference counting for dynamically allocated platform devices. Convert
all in-tree users that manually assigned dev.of_node or dev.fwnode, fixing a
pre-existing refcount bug in powermac. Switch to counting references of all
firmware node types, not only OF nodes.
- Unify the release path for dynamically allocated platform devices by
removing platform_device_release_full(). Amend the fwnode setter API
contract to warn if a primary software node is overwritten. Add KUnit tests
for correct software node removal on device unregistration.
- Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant ForLt types.
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements from
kernel::transmute traits to zerocopy traits.
- Device:
- Add BoundInternal device context and InternalBoundContext trait for bus
abstractions that need internal access to a bound device.
- Make the lifetime on Core and CoreInternal invariant to prevent coercion
to shorter lifetimes.
- Devres:
- Fix race between concurrent revokers where the losing revoker could return
before the winning revoker finished dropping the inner data, causing
use-after-free.
- Ensure revocation is complete before the device finishes unbinding by
making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens 'static back
to the caller's borrow scope. Implement ForLt and CovariantForLt for Bar,
IoMem, and ExclusiveIoMem.
- Driver:
- Switch from index-based to pointer-based device ID info lookup, storing
static references in driver_data. Centralize device ID handling in
device_id.rs, removing the open-coded ACPI/OF matching logic and duplicate
ID table from driver.rs.
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type for the
existing untyped case), create view types representing subregions of a
mapped I/O region, and add io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with a
blanket implementation, preventing implementers from overriding provided
methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access, and
make Coherent implement Io via an I/O view type. Add IoSysMap as sum type
of Mmio and SysMem. Add copying methods (memcpy_{from,to}io()) and
read_val()/write_val() for typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!() for
primitives and copying methods for aggregates; drop the old macros.
Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro, remove
unused rule arguments, and use path fragments for alias destinations.
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers by
removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources.
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning type,
giving drivers explicit control over the allocation lifetime.
IrqVector embeds a resolved IrqRequest, making the conversion
infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX, PCI_IRQ_MSI,
or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline.
- Serdev:
- Add Rust abstractions for the serial device bus, including serdev::Driver
trait, serdev::Device wrapping struct serdev_device, and serdev::Adapter
implementing RegistrationOps. Includes a sample driver. Markus Probst
takes over as serdev maintainer for both C and Rust code.
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an unsafe
CovariantForLt subtrait guaranteeing covariance, enabling invariant types
(e.g. those containing Mutex<&'bound T>) to participate in the ForLt
abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef.
- misc:
- Avoid iattr allocation in kernfs listxattr by using kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark internal property
data as private for kernel-doc, and add property.h/fwnode.h to driver-api
infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaoSPugAKCRBFlHeO1qrK
LlBrAP958EaYZVyfAsqq0EyHv86ahXKWoDDvkwbRUZA5CfV9tAD/bMWVtPLRYaaq
eNEZT7p5w3Haezh61H3c5zpuwFNMTA0=
=VRIa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2843318.mvXUDI8C0e@rafael.j.wysocki
With device ID info now including pointers instead of indices, the
open-coded ACPI/OF matching is no longer needed and can be replaced with
`device_get_match_data`.
With the removal of open-coded matching, the exposed functions and helpers
are also removed; this effectively reverts most of commit 2690d07158
("rust: ACPI: fix missing match data for PRP0001").
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260629-id_info-v2-9-56fccbe9c5ef@garyguo.net
[ Consider the serdev code merged in the meantime. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The platform firmware on some platforms sets OSC_CAPABILITIES_MASK_ERROR
in _OSC error bits even though it actually acknowledges all of the
requested features which after commit e5322888e6 ("ACPI: bus: Rework
the handling of \_SB._OSC platform features") causes the kernel to
complain unnecessarily.
Avoid the confusing complaints by explicitly checking for that case
in acpi_osc_handshake().
Fixes: e5322888e6 ("ACPI: bus: Rework the handling of \_SB._OSC platform features")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Saverio Miroddi <saverio.pub2@gmail.com>
[ rjw: Fixed a typo in the new comment ]
Link: https://patch.msgid.link/6315683.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that struct acpi_driver has no more users, eliminate it along with
all of the code related to it.
Also remove the file added by commit b8c8a8ea18 ("ACPI: Documentation:
driver-api: Disapprove of using ACPI drivers") because it will not be
necessary any more after eliminating struct acpi_driver from the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/5132944.31r3eYUQgx@rafael.j.wysocki
Highlights:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ACPI:
- provide acpi_bus_find_device_by_name()
alienware-wmi-base:
- Transition to new WMI API
amd: hfi:
- Support for ranking table versions
amd/hsmp:
- Clamp ioctl/send_message indices (Spectre v1)
amd/pmc:
- Add delay_suspend module parameter
- Add PMC driver support for AMD 1Ah M80H SoC
- Check for intermediate wakeup in function
- Delay suspend for some Lenovo Laptops
- Don't log during intermediate wakeups
- Use per-SoC cpu_info struct for SMU mailbox and IP info
apple-gmux:
- Drop unused assignment of pnp_device_id driver data
arm64:
- Add driver for EC found on Qualcomm reference devices
arm64: qcom-hamoa-ec:
- Fix indentation in comment tables
arm64 Use named initializers for struct i2c_device_id:
- arm64 Use named initializers for struct i2c_device_id
asus-armoury:
- add support for FX608JPR
- add support for G614PR
- add support for GA402NJ
- add support for GA403UM
asus-wmi:
- add keystone dongle support
barco-p50-gpio:
- attach software node to its target GPIO device
classmate-laptop:
- Address memory leaks on driver removal
- Convert accel driver to a platform one
- Convert ipml driver to a platform one
- Convert keys driver to a platform one
- Convert tablet driver to a platform one
- Convert v4 accel driver to a platform one
- Pass struct device pointer to helpers
- Register ACPI notify handlers directly
- Rename two helper functions
- Unify probe rollback and remove code
dell-ddv:
- Use new buffer-based WMI API
dell-descriptor:
- Use new buffer-based WMI API
dell-dw5826e:
- Add reset driver for DW5826e
dell-laptop:
- add Inspiron N5110 to touchpad LED quirk table
- fix missing cleanups in init error path
dell-privacy:
- correct CONFIG_DELL_WMI_PRIVACY macro name in comments
- Use new buffer-based WMI API
dell_rbu:
- use strscpy in image_type_write
dell-smbios-wmi:
- Use new buffer-based WMI API
dell-wmi-base:
- Use new buffer-based WMI API
docs:
- fix typo in uniwill-laptop.rst
hp-wmi:
- Add support for Omen 16-ap0xxx (8D26)
- Add support for Omen 16-ap0xxx (8E35)
- Add thermal support for board 8B2F
hwmon:
- (dell-smm) Use new buffer-based WMI API
intel-hid:
- Add HP ProBook x360 440 G1 to button_array_table
- Protect ACPI notify handler against recursion
intel/pmc:
- Add ACPI PWRM telemetry driver for Nova Lake S
- Add Nova Lake support to intel_pmc_core driver
- Add NVL PCI IDs for SSRAM telemetry discovery
- Add PMC SSRAM Kconfig description
- Add support for variable DMU offsets
- Enable Pkgc blocking residency counter
- Enable PkgC LTR blocking counter
- rate-limit LTR scale-factor warning
- Retrieve PMC info only for available PMCs
intel/pmc/ssram:
- Add ACPI discovery scaffolding
- Add PCI platform data
- Make PMT registration optional
- Refactor DEVID/PWRMBASE extraction into helper
- Rename probe and PCI ID table for consistency
- Switch to static array with per-index probe state
intel/pmc:
- Use __free() in pmc_core_punit_pmt_init()
- Use PCI DID for PMC SSRAM device discovery
intel/pmt:
- Add pre/post decode hooks around header parsing
- Cache the telemetry discovery header
intel/pmt/crashlog:
- Split init into pre-decode
intel/pmt:
- Pass discovery index instead of resource
intel/pmt/telemetry:
- Move overlap check to post-decode hook
intel/pmt:
- Unify header fetch and add ACPI source
intel/tpmi:
- convert mutex in mem_write() to guard
- use cleanup helpers in mem_write()
intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- Rename instance_id
intel/vsec:
- allocate res with intel_vsec_dev
- Restore BAR fallback for header walk
ISST:
- Restore SST-PP control to all domains
lenovo-wmi-capdata:
- Add debugfs file for dumping capdata
lenovo-wmi-helpers:
- Add helper for creating per-device debugfs dir
lenovo-wmi-other:
- Add force_load_psy_ext module parameter
- Add GPU tunable attributes
- Add missing CPU tunable attributes
- Add WMI battery charge limiting
- Rename LWMI_OM_FW_ATTR_BASE_PATH
meraki-mx100:
- use real software node references
modpost:
- Handle malformed WMI GUID strings
Move delayed work on system_dfl_wq:
- Move delayed work on system_dfl_wq
msi-ec:
- Add support for MSI Pulse GL66 12th Gen
oxpec:
- add support for OneXPlayer Super X
panasonic-laptop:
- simplify allocation of sinf
pcengines-apuv2:
- reduce indiraction in swnode assignment
pmc_atom:
- Use named initializer for pci_device_id array
sel3350-platform:
- Retain LED state on load and unload
sonypi:
- use strscpy() in sonypi_acpi_probe
surface: SAM:
- Add support for Surface Pro 12in
thinkpad_acpi:
- Add debugfs entry to display HWDD raw
- Remove unneeded goto
tools/power/x86/intel-speed-select:
- Harden daemon pidfile open
uniwill-laptop:
- Add support for battery charge modes
- Enable battery charge modes on supported devices
- Mark EC_ADDR_OEM_4 as volatile
- Rework FN lock/super key suspend handling
use u8 * for raw byte buffers:
- use u8 * for raw byte buffers
wmi:
- Make sysfs attributes const
- Make wmi_bus_class const
x86-android-tablets:
- enable fwnode matching of GPIO chips
- Use named initializers for struct i2c_device_id
x86/platform/olpc: xo15:
- Convert ACPI driver to a platform one
- Drop wakeup source on driver removal
xo15-ebook:
- Convert ACPI driver to a platform one
- Fix formatting of labels
- Fix wakeup source and GPE handling
- Register ACPI notify handler directly
- Use devres-based resource management
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCajl8LgAKCRBZrE9hU+XO
MZ47AP0Z0IoiT8WEcXL4wuTQyR6ruXWClYk82wiroAFEko8Z5AD/WYNWCBXqjZk+
FlJbtleRLA/ADmgT3Mj+biHNTIqyBA0=
=Q3d+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
- deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
- device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
- device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
- driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
- firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
- platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
- sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
- Rust:
- ACPI:
- Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
- Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device
private data beyond the driver's own scope, creating ordering
constraints and forcing the data to outlive all registrations
that access it. Registration data is instead scoped structurally
to the Registration object, making lifecycle ordering enforced
by construction rather than convention.
- Rust-native device driver lifetimes (HRT):
- Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly
in the driver's bus device private data with a lifetime bounded
by the binding scope, so the compiler enforces at build time that
they do not outlive the binding. This removes Devres indirection
from every access site and eliminates try_access() failure paths
in destructors.
Bus driver traits use a Generic Associated Type (GAT)
Data<'bound> to introduce the lifetime on the private data,
rather than parameterizing the Driver trait itself. Auxiliary
registration data, where the lifetime is not introduced by a
trait callback but must be threaded through Registration, uses
the ForLt trait (a type-level abstraction for types generic over
a lifetime).
- Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCai1lNQAKCRBFlHeO1qrK
LjX1AP4kEb6SJdvBFlG/IJcG9vyqA7+Cig8OIlx9vEX7e7GvNwEAxL2HltAlAd5Q
cOIJOlu0uM+j1mn0JyuM9b0WJrxDLAA=
=E5mG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
Add a pointer to the struct acpi_device used for installing the ACPI
notify handler to struct acpi_notify_handler_devres so it need not
be retrieved from the owner device via ACPI_COMPANION() in
devm_acpi_notify_handler_release().
While at it, drop the function name from one of the messages printed
by devm_acpi_install_notify_handler() for consistency and fix up white
space in its kerneldoc comment.
No intentional functional impact.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2841496.mvXUDI8C0e@rafael.j.wysocki
Introduce devm_acpi_install_notify_handler() for installing an ACPI
notify handler managed by devres that will be removed automatically on
driver detach.
It installs the notify handler on the device object in the ACPI
namespace that corresponds to the owner device's ACPI companion, if
present (an error is returned if the owner device doesn't have an ACPI
companion).
Currently, there is no way to manually remove the notify handler
installed by it because none of its users brought on subsequently
will need to do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Kerneldoc comment refinement ]
Link: https://patch.msgid.link/2268031.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Provide a helper allowing to locate an ACPI device by its name.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260504-baytrail-real-swnode-v5-1-c7878b69e383@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Export `acpi_of_match_device` function and use it to match the of device
table against ACPI PRP0001 in Rust.
This fixes id_info being None on ACPI PRP0001 devices.
Using `device_get_match_data` is not possible, because Rust stores an
index in the of device id instead of a data pointer. This was done this
way to provide a convenient and obvious API for drivers, which can be
evaluated in const context without the use of any unstable language
features.
Fixes: 7a718a1f26 ("rust: driver: implement `Adapter`")
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> # ACPI
Link: https://patch.msgid.link/20260427-rust_acpi_prp0001-v6-1-6119b2a66183@posteo.de
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
MFD child devices sharing parent's ACPI Companion fails to probe as
acpi_companion_match() returns incompatible ACPI Companion handle for
binding with the check for pnp.type.backlight added recently. Remove this
pnp.type.backlight check in acpi_companion_match() to fix the automatic
modprobe issue.
Fixes: 7a7a7ed5f8bdb ("ACPI: scan: Register platform devices for backlight device objects")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://patch.msgid.link/20260318034842.1216536-1-pratap.nirujogi@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge updates of drivers handling devices defined in the ACPI
specification and other generic devices with ACPI interfaces for
6.20-rc1/7.0-rc1:
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
* acpi-driver: (25 commits)
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: scan: Clean up after recent changes
ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons
ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM
ACPI: Documentation: driver-api: Disapprove of using ACPI drivers
ACPI: video: Convert the driver to a platform one
ACPI: video: Adjust event notification routine
ACPI: scan: Register platform devices for backlight device objects
ACPI: SBS: Convert the driver to a platform one
ACPI: SMBUS HC: Convert the driver to a platform one
ACPI: EC: Convert the driver to a platform one
ACPI: EC: Register a platform device for ECDT EC
ACPI: HED: Convert the driver to a platform one
ACPI: thermal: Rework system suspend and resume handling
ACPI: thermal: Convert the driver to a platform one
ACPI: thermal: Adjust event notification routine
ACPI: scan: Register platform devices for thermal zones
ACPI: scan: Do not mark button ACPI devices as wakeup-capable
ACPI: scan: Do not bind ACPI drivers to fixed event buttons
ACPI: tiny-power-button: Convert the driver to a platform one
...
Merge ACPI support updates related to _OSC evaluation, the handling of
"system resource" device objects, and ACPI-based device enumeration
for 6.20-rc1/7.0-rc1:
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
* acpi-bus:
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: bus: Align acpi_device_get_match_data() with driver match order
ACPI: scan: Drop outdated comment regarding removed function
ACPI: scan: Use resource_type() for resource type checking
ACPI: bus: Fix typo under sizeof() in acpi_run_osc()
ACPI: bus: Adjust acpi_osc_handshake() parameter list
ACPI: bus: Rework the handling of \_SB._OSC USB4 features
ACPI: bus: Adjust feature mask creation for \_SB._OSC
ACPI: bus: Rework the handling of \_SB._OSC platform features
ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc()
ACPI: bus: Split _OSC error processing out of acpi_run_osc()
ACPI: bus: Split _OSC evaluation out of acpi_run_osc()
ACPI: bus: Rework printing debug messages on _OSC errors
ACPI: bus: Fix handling of _OSC errors in acpi_run_osc()
ACPI: PNP: Drop acpi_nonpnp_device_ids[]
platform/x86/intel/vbtn: Stop creating a platform device
platform/x86/intel/hid: Stop creating a platform device
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
On ARM64 ACPI systems GICv5 IRSes are described in MADT sub-entries.
Add the required plumbing to parse MADT IRS firmware table entries and
probe the IRS components in ACPI.
Augment the irqdomain_ops.translate() for PPI and SPI IRQs in order to
provide support for their ACPI based firmware translation.
Implement an irqchip ACPI based callback to initialize the global GSI
domain upon an MADT IRS detection.
The IRQCHIP_ACPI_DECLARE() entry in the top level GICv5 driver is only used
to trigger the IRS probing (ie the global GSI domain is initialized once on
the first call on multi-IRS systems); IRS probing takes place by calling
acpi_table_parse_madt() in the IRS sub-driver, that probes all IRSes
in sequence.
Add a new ACPI interrupt model so that it can be detected at runtime and
distinguished from previous GIC architecture models.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-4-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI device objects associated with backlight interfaces are special
because they are ACPI companions of PCI devices (GPUs), but the
interfaces exposed by them resemble platform device one.
Currently, the ACPI video driver binds to them with the help of a
special "synthetic" device ID regardless of the pairing with the PCI
devices, but since it is generally better to use platform drivers for
handling such interfaces, the plan is to convert that drviver into a
platform one.
However, for this purpose, platform devices corresponding to the
ACPI backlight device objects need to be registered, so update
acpi_bus_attach() to apply the default ACPI enumeration to them
and modify acpi_create_platform_device() to avoid bailing out early
if a "physical" device is already attached to a backlight ACPI device
object.
In addition, update acpi_companion_match() to return a valid struct
acpi_device pointer if the ACPI companion of the given device is a
backlight ACPI device object, which will facilitate driver matching
for platform devices corresponding to those objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/5081593.31r3eYUQgx@rafael.j.wysocki
During pre-production development, drivers may provide both ACPI and OF
match tables while a formal ACPI HID for the device is not yet
allocated. Such devices are enumerated via PRP0001. In this case,
acpi_device_get_match_data() consults only the driver’s ACPI match table
and returns NULL, even though the device was successfully matched via
PRP0001.
This behavior also risks breaking existing PRP0001 setups if a driver
later gains an ACPI HID, as the presence of an ACPI match table changes
the match-data lookup path.
Make acpi_device_get_match_data() use the same precedence as driver
matching by using __acpi_match_device(). Return match data from the
acpi_id or of_id that was actually matched.
Remove now-unused acpi_of_device_get_match_data().
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260114082306.48119-1-kkartik@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The sizeof(32) in acpi_run_osc() should be sizeof(u32), so fix it.
Fixes: e5322888e6 ("ACPI: bus: Rework the handling of \_SB._OSC platform features")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/2817106.mvXUDI8C0e@rafael.j.wysocki
For the sake of interface cleanliness, it is better to avoid using
ACPICA data types in the parameter lists of helper functions that
don't belong to ACPICA, so adjust the parameter list of recently
introduced acpi_osc_handshake() to take a capabilities buffer pointer
and the size of the buffer (in u32 size units) as parameters directly
instead of a struct acpi_buffer pointer.
This is also somewhat more straightforward on the caller side because
they won't need to create struct acpi_buffer objects themselves to pass
them to the helper function and it guarantees that the size of the
buffer in bytes will always be a multiple of 4 (the size of u32).
Moreover, it addresses a premature cap pointer dereference and
eliminates a sizeof(32) that should have been sizeof(u32) [1].
Fixes: e5322888e6 ("ACPI: bus: Rework the handling of \_SB._OSC platform features")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-acpi/202512242052.W4GhDauV-lkp@intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Fixed typo under sizeof(), used ARRAY_SIZE() in two places ]
Link: https://patch.msgid.link/12833187.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_osc_handshake() introduced previously for implementing the
\_SB._OSC USB4 features control negotiation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/3879947.MHq7AAxBmi@rafael.j.wysocki
The feature mask creation for \_SB._OSC is messy and hard to follow,
so clean it up and make all of the CPPC-related features depend on
CONFIG_ACPI_CPPC_LIB as they will not work if it is not set anyway.
Also make acpi_bus_osc_negotiate_platform_control() print a message
including a bit mask representig the features for which control has
been granted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/4495088.ejJDZkT8p0@rafael.j.wysocki
Both acpi_bus_osc_negotiate_platform_control() and
acpi_bus_osc_negotiate_usb_control() first call acpi_run_osc() to
evaluate _OSC in "query mode", with OSC_QUERY_ENABLE set in the
capabilities buffer, and then use the resultant feature mask as
the input buffer for requesting control of those features by
calling acpi_run_osc() to evaluate _OSC with OSC_QUERY_ENABLE clear.
This involves some code duplication and unnecessary memory
allocations, so introduce a new helper function carrying out an
_OSC handshake along the lines of the above description in a simpler
way and update acpi_bus_osc_negotiate_platform_control() to use it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/1966378.CQOukoFCf9@rafael.j.wysocki
Use ACPI_FREE() for freeing an object coming from acpi_eval_osc()
and rename the "out_free" to "out" because it does not involve
kfree() any more.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/8682086.NyiUUSuA9g@rafael.j.wysocki
Split a function for processing _OSC errors called acpi_osc_error_check()
out of acpi_run_osc() to facilitate subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/6135328.MhkbZ0Pkbq@rafael.j.wysocki
Split a function for evaluating _OSC called acpi_eval_osc() out of
acpi_run_osc() to facilitate subsequent changes and add some more
parameters sanity checks to the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/22963770.EfDdHjke4D@rafael.j.wysocki
Instead of using one function, acpi_print_osc_error(), for printing a
debug message and dumping the _OSC request data in one go, use
acpi_handle_debug() directly for printing messages and a separate
function called acpi_dump_osc_data() for dumping the _OSC request data
before printing one or more of them.
This avoids
* dumping _OSC request data multiple times when there are
multiple error bits set in the return buffer,
* wrapping message lines on terminals with 80 character line width,
* mixing up unrelated messages by printing full lines only,
and generally helps to make the messages easier to parse.
Also, use %pUL for UUID printing instead of printing UUIDs as strings
and include the revision number into the dumped _OSC request data.
This is how the debug printout looks like when the
OSC_REQUEST_ERROR and OSC_INVALID_REVISION_ERROR bits
are set in the return buffer before the change:
ACPI: \_SB_: ACPI: (0811B06E-4A27-44F9-8D60-3CBBC22E7B48): _OSC request failed
ACPI: _OSC request data:
ACPI: 1
ACPI: 2e7eff
ACPI:
ACPI: \_SB_: ACPI: (0811B06E-4A27-44F9-8D60-3CBBC22E7B48): _OSC invalid revision
ACPI: _OSC request data:
ACPI: 1
ACPI: 2e7eff
ACPI:
and this is how it is going to look like afterward:
ACPI: \_SB_: ACPI: _OSC: UUID: 0811B06E-4A27-44F9-8D60-3CBBC22E7B48, rev: 1
ACPI: \_SB_: ACPI: _OSC: capabilities DWORD 0: [00000001]
ACPI: \_SB_: ACPI: _OSC: capabilities DWORD 1: [002e7eff]
ACPI: \_SB_: ACPI: _OSC: request failed
ACPI: \_SB_: ACPI: _OSC: invalid revision
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/10794028.nUPlyArG6x@rafael.j.wysocki
The handling of _OSC errors in acpi_run_osc() is inconsistent and
arguably not compliant with the _OSC definition (cf. Section 6.2.12 of
ACPI 6.6 [1]).
Namely, if OSC_QUERY_ENABLE is not set in the capabilities buffer and
any of the error bits are set in the _OSC return buffer, acpi_run_osc()
returns an error code and the _OSC return buffer is discarded. However,
in that case, depending on what error bits are set, the return buffer
may contain acknowledged bits for features that need to be controlled by
the kernel going forward.
If the OSC_INVALID_UUID_ERROR bit is set, the request could not be
processed at all and so in that particular case discarding the _OSC
return buffer and returning an error is the right thing to do regardless
of whether or not OSC_QUERY_ENABLE is set in the capabilities buffer.
If OSC_QUERY_ENABLE is set in the capabilities buffer and the
OSC_REQUEST_ERROR or OSC_INVALID_REVISION_ERROR bits are set in the
return buffer, acpi_run_osc() may return an error and discard the _OSC
return buffer because in that case the platform configuration does not
change. However, if any of them is set in the return buffer when
OSC_QUERY_ENABLE is not set in the capabilities buffer, the feature
mask in the _OSC return buffer still represents a set of acknowleded
features as per the _OSC definition:
The platform acknowledges the Capabilities Buffer by returning a
buffer of DWORDs of the same length. Set bits indicate acknowledgment
that OSPM may take control of the capability and cleared bits indicate
that the platform either does not support the capability or that OSPM
may not assume control.
which is not conditional on the error bits being clear, so in that case,
discarding the _OSC return buffer is questionable. There is also no
reason to return an error and discard the _OSC return buffer if the
OSC_CAPABILITIES_MASK_ERROR bit is set in it, but printing diagnostic
messages is appropriate when that happens with OSC_QUERY_ENABLE clear
in the capabilities buffer.
Adress this issue by making acpi_run_osc() follow the rules outlined
above.
Moreover, make acpi_run_osc() only take the defined _OSC error bits into
account when checking _OSC errors.
Link: https://uefi.org/specs/ACPI/6.6/06_Device_Configuration.html#osc-operating-system-capabilities [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Corrected typo in the changelog ]
Link: https://patch.msgid.link/3042649.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI sysfs code will fail to initialize if acpi_kobj is NULL,
together with some ACPI drivers.
Follow the other firmware subsystems and bail out if the kobject
cannot be registered.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250518185111.3560-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To avoid arch-specific code in general ACPI initialization flow,
introduce a weak symbol acpi_arch_init().
Currently, arm64 and riscv can utillize this to insert their
arch-specific flow.
In the future, other architectures can also have a chance to define
their own arch-specific ACPI initialization process if necessary.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the IRQ model for RISC-V INTC so that acpi_set_irq_model can use this
for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-8-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new function for RISC-V to do architecture specific initialization
similar to acpi_arm_init(). Some of the ACPI tables are architecture
specific and there is no reason trying to find them on other
architectures. So, add acpi_riscv_init() similar to acpi_arm_init().
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-4-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACPI battery driver can handle the "charge limiting" state
of the battery, so the platform can advertise this state.
Indicate this by setting bit 19 ("Battery Charge Limiting Support")
when evaluating _OSC.
Tested on a Lenovo Ideapad S145-14IWL.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20240620191410.3646-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI device enumeration changes and ACPI data-only tables support
updates for 6.10:
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko).
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko).
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki).
- Rework the handling of the NHLT table to simplify and clarify it and
drop some obsolete pieces (Cezary Rojewski).
* acpi-scan:
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: scan: Introduce typedef:s for struct acpi_hotplug_context members
ACPI: scan: Use standard error checking pattern
ACPI: scan: Move misleading comment to acpi_dma_configure_id()
ACPI: scan: Use list_first_entry_or_null() in acpi_device_hid()
ACPI: bus: Don't use "proxy" headers
ACPI: bus: Make container_of() no-op where it makes sense
* acpi-tables:
ACPI: NHLT: Streamline struct naming
ACPI: NHLT: Drop redundant types
ACPI: NHLT: Introduce API for the table
ACPI: NHLT: Reintroduce types the table consists of
The return value of _STA with the "present" bit unset and the "enabled"
bit set is clearly invalid as per the ACPI specification, Section 6.3.7
"_STA (Device Status)", so make the ACPI device enumeration code
disregard devices with such _STA return values.
Also, because this implies that status.enabled will only be set if
status.present is set too, acpi_device_is_enabled() can be modified
to simply return the value of the former.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status
Link: https://lore.kernel.org/linux-acpi/88179311a503493099028c12ca37d430@huawei.com/
Suggested-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Modules registering driver with acpi_bus_register_driver() often forget to
set .owner field. The field is used by some of other kernel parts for
reference counting (try_module_get()), so it is expected that drivers
will set it.
Solve the problem by moving this task away from the drivers to the core
ACPI bus code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI IRQ mapping code supports parsing of ResourceSource,
but this is not reported thru _OSC.
Fix this by setting bit 13 ("Interrupt ResourceSource support")
when evaluating _OSC.
Fixes: d44fa3d460 ("ACPI: Add support for ResourceSource/IRQ domain mapping")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A device driver for the Generic Event Device (ACPI0013) already
exists for quite some time, but support for it was never reported
thru _OSC.
Fix this by setting bit 11 ("Generic Event Device support") when
evaluating _OSC.
Fixes: 3db80c230d ("ACPI: implement Generic Event Device")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The code responsible for parsing the available p-states should
have no problems handling more than 16 p-states.
Indicate this by setting bit 10 ("Greater Than 16 p-state support")
when evaluating _OSC.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI thermal driver already uses the _TPF ACPI method to retrieve
precise sampling time values, but this is not reported thru _OSC.
Fix this by setting bit 9 ("Fast Thermal Sampling support") when
evaluating _OSC.
Fixes: a2ee7581af ("ACPI: thermal: Add Thermal fast Sampling Period (_TFP) support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the driver core can properly handle constant struct bus_type,
move the acpi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The platform can deny certain tunneling from the OS and it does that by
clearing the control bits it does not want the OS to get and returning
with OSC_CAPABILITIES_MASK_ERROR bit set. Currently we do not handle
this properly so if this happens, for example when the platform denies
PCIe tunneling, we just fail the whole negotiation and revert back to
what the Thunderbolt driver is doing to figure out whether the
controller is running firmware connection manager or not. However, we
should honor what the platform returns.
For this reason run the USB4 _OSC() first with query bit set, and then
use the returned control double word (that may contain some of the bits
cleared by the platform) and run it second time with query bit clear.
While there, remove an extra space from the assignment of the control
double word.
Reported-by: NaamaX Shachar <naamax.shachar@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI bus type driver updates for 6.7-rc1:
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
* acpi-bus:
ACPI: bus: Add context argument to acpi_dev_install_notify_handler()
ACPI: docs: enumeration: Clarify ACPI bus concepts
acpi_agdi_init() in acpi_arm_init() will register a SDEI event, so
it needs the SDEI subsystem to be initialized (which is done in
acpi_ghes_init()) before the AGDI driver probing.
In commit fcea0ccf4f ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()"), the acpi_agdi_init() was
called before acpi_ghes_init() and it causes following failure:
| [ 0.515864] sdei: Failed to create event 1073741825: -5
| [ 0.515866] agdi agdi.0: Failed to register for SDEI event 1073741825
| [ 0.515867] agdi: probe of agdi.0 failed with error -5
| ...
| [ 0.516022] sdei: SDEIv1.0 (0x0) detected in firmware.
Fix it by moving acpi_arm_init() to the place of after
acpi_ghes_init().
Fixes: fcea0ccf4f ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()")
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add void *context arrgument to the list of arguments of
acpi_dev_install_notify_handler() and modify it to pass that argument
as context to acpi_install_notify_handler() instead of its first
argument which is problematic in general (for example, if platform
drivers used it, they would rather get struct platform_device pointers
or pointers to their private data from the context arguments of their
notify handlers).
Make all of the current callers of acpi_dev_install_notify_handler()
take this change into account so as to avoid altering the general
functionality.
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
Change acpi_early_processor_osc() to return a value in case of a
failure and make it static.
Also make it run acpi_processor_osc() for every processor object or
processor device found in the ACPI Namespace (previously, its only purpose
was to work around platform firmware defects on Skylake systems).
Introduce a new function called acpi_early_processor_control_setup() that
will invoke acpi_early_processor_osc() first in order to convey the OS
processor support information to the platform firmware and if that fails,
it will fall back to using _PDC.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits, change function return value to bool,
add missing 'static', change messages ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
