rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on the allocation-failure fallback where
a path shares rds_wq, the work items simply serialize).
Nor is the blocking wait itself new: rds_tcp_reset_callbacks() has
waited on RDS_IN_XMIT from the krdsd work item since
commit 335b48d980 ("RDS: TCP: Add/use rds_tcp_reset_callbacks to
reset tcp socket safely"); this patch stretches its worst case from
a sender's batch to the teardown's drain. The alternative to parking
is the accept path racing the teardown, which is what these patches
close; making the teardown itself non-blocking is a separate item.
One observable side effect: the SENDING flag reported by rds-info has
always mirrored RDS_IN_XMIT, so it now also covers the window where
teardown owns the bit.
The comments that describe the old sample-based handshake or name
rds_send_xmit() as the only other holder of these bits - in
rds_send_xmit(), above rds_conn_path_reset(), in rds_ib_recv_refill()
and in rds_tcp_reset_callbacks() - are updated to match.
For anyone backporting this patch standalone: it depends on
"net/rds: clear cp_flags bits individually in rds_conn_path_reset()"
and "net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()"
earlier in this series. Without the former, the blanket cp_flags
clear in rds_conn_path_reset() would drop both held bits in the middle
of the teardown; without the latter, rds_tcp_reset_callbacks() would
still sample t_sock without owning RDS_IN_XMIT. "net/rds: use
clear_bit_unlock() in release_refill()" is needed for the refill
side's release to pair with the acquire added here, and the follow-up
"net/rds: don't let rds_conn_shutdown() consume a concurrent drop"
completes the teardown-state handling for the waiter this patch
parks; a backport should carry all four.
Fixes: 0f4b1c7e89 ("rds: fix rds_send_xmit() serialization")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
[achender: reimplement for net-next shutdown path: acquire the existing
RDS_IN_XMIT/RDS_RECV_REFILL bit locks in rds_conn_shutdown() and release
after teardown; update comments and commit message]
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier.
Fixes: 1422f28826 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The to_be_dropped list is declared once at the top of rds_send_xmit()
but the function can loop via "goto restart" after each batch. The
code currently relies on rds_send_remove_from_sock() having emptied
the list entry by entry (via list_del_init()) at the end of the
previous batch; nothing in rds_send_xmit() itself guarantees the list
head is empty when a new batch starts.
Re-initialize the list on every restart, and warn once if it is ever
found non-empty there: entries left on the list at that point would
keep their message reference, their RDS_MSG_ON_SOCK accounting and
their pending RDS_RDMA_DROPPED notification, so a silent re-init
would orphan them. This is hardening: no user-visible bug is known
in the current code.
This mirrors Oracle UEK commit "net/rds: rds_send_xmit should
INIT_LIST_HEAD(&to_be_dropped) on restart".
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
[achender: port to net-next (keep the existing LIST_HEAD declaration and
add only the restart re-init); warn if the restart invariant is
violated; update commit message]
Assisted-by: Claude-Code:claude-fable-5
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260809005103.82371-2-achender@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When rds_send_xmit() picks the next message off cp_send_queue it takes
its own reference with rds_message_addref(). If the message then hits
the never-retransmit check (RDS_MSG_FLUSH, or an RDMA op that was
already retransmitted), it is moved to the local to_be_dropped list and
that reference is dropped after the batch.
However, if RDS_MSG_ON_CONN has already been cleared, the message is
not added to to_be_dropped and the reference taken above is never
dropped: cp_xmit_rm has not been set at this point, so the loop simply
abandons rm and the rds_message (and everything it pins: pages, MRs,
notifiers) leaks after an RDMA error.
The only other places that clear RDS_MSG_ON_CONN are
rds_send_path_drop_acked() and rds_send_drop_to(), and both can run
while rds_send_xmit() has dropped cp_lock between moving the message
to cp_retrans and re-taking the lock in the never-retransmit check:
rds_send_path_drop_acked() can ack away a message that already sat on
cp_retrans - the RDS_MSG_RETRANSMITTED case above - and
rds_send_drop_to() runs on socket close. Both unlink the message
under cp_lock and put their own reference, leaving the xmit-path
reference stranded.
Drop the reference directly in that case.
This mirrors Oracle UEK commit "net/rds: fix rds_message memleak in
rds_send_xmit".
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
[achender: port to net-next; update commit message, checkpatch nits]
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260730041629.3512480-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use krealloc_array() for growing the RDS iovector array. This makes the
array allocation overflow-safe and derives the element size from the
array pointer.
Reviewed-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Weimin Xiong <xiongwm2026@163.com>
Link: https://patch.msgid.link/20260717022537.331863-1-xiongwm2026@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_rm_size() handles RDS_CMSG_RDMA_ARGS after only CMSG_OK() and then
calls rds_rdma_extra_size(), which reads args->local_vec_addr and
args->nr_local without first checking that cmsg_len covers struct
rds_rdma_args. The other two RDS_CMSG_RDMA_ARGS consumers already guard
this: rds_rdma_bytes() in rds_sendmsg() and rds_cmsg_rdma_args() in
rds_cmsg_send() both reject cmsg_len < CMSG_LEN(sizeof(struct
rds_rdma_args)). Add the same check to rds_rm_size() so all three RDMA
args passes are consistent.
This is a consistency and hardening change with no behavioral effect for
well-formed senders and no reachable bug today: rds_rdma_bytes() runs
before rds_rm_size() in rds_sendmsg() and already rejects a short
RDS_CMSG_RDMA_ARGS, so the size pass is not reached with an undersized
cmsg. But rds_rm_size() reads the args independently of that earlier
pass, and nothing in rds_rm_size() itself records or enforces the
precondition, so a reader or a future refactor of the size pass cannot
tell the cmsg has already been length-checked. Applying the same
cmsg_len guard in all three RDS_CMSG_RDMA_ARGS consumers keeps that
invariant local to each and robust to reordering.
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260617023146.2780077-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function rds_send_reset() was subsumed by rds_send_path_reset()
by commit d769ef81d5 ("RDS: Update rds_conn_shutdown to work with
rds_conn_path"). Update the comment accordingly.
Signed-off-by: kexinsun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260224020720.1174-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with
connection teardown") modifies rds_sendmsg to avoid enqueueing work
while a tear down is in progress. However, it also changed the return
value of rds_sendmsg to that of rds_send_xmit instead of the
payload_len. This means the user may incorrectly receive errno values
when it should have simply received a payload of 0 while the peer
attempts a reconnections. So this patch corrects the teardown handling
code to only use the out error path in that case, thus restoring the
original payload_len return value.
Fixes: 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with connection teardown")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260213035409.1963391-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though a peer may have already received a
non-zero value for "RDS_EXTHDR_NPATHS" from a node in the past,
the current peer may not.
Therefore it is important to initiate another rds_send_ping()
after a re-connect to any peer:
It is unknown at that time if we're still talking to the same
instance of RDS kernel modules on the other side.
Otherwise, the peer may just operate on a single lane
("c_npaths == 0"), not knowing that more lanes are available.
However, if "c_with_sport_idx" is supported,
we also need to check that the connection we accepted on lane#0
meets the proper source port modulo requirement, as we fan out:
Since the exchange of "RDS_EXTHDR_NPATHS" and "RDS_EXTHDR_SPORT_IDX"
is asynchronous, initially we have no choice but to accept an incoming
connection (via "accept") in the first slot ("cp_index == 0")
for backwards compatibility.
But that very connection may have come from a different lane
with "cp_index != 0", since the peer thought that we already understood
and handled "c_with_sport_idx" properly, as indicated by a previous
exchange before a module was reloaded.
In short:
If a module gets reloaded, we recover from that, but do *not*
allow a downgrade to support fewer lanes.
Downgrades would require us to merge messages from separate lanes,
which is rather tricky with the current RDS design.
Each lane has its own sequence number space and all messages
would need to be re-sequenced as we merge, all while
handling "RDS_FLAG_RETRANSMITTED" and "cp_retrans" properly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of just blocking the sender until "c_npaths" is known
(it gets updated upon the receipt of a MPRDS PONG message),
simply use the first lane (cp_index#0).
But just using the first lane isn't enough.
As soon as we enqueue messages on a different lane, we'd run the risk
of out-of-order delivery of RDS messages.
Earlier messages enqueued on "cp_index == 0" could be delivered later
than more recent messages enqueued on "cp_index > 0", mostly because of
possible head of line blocking issues causing the first lane to be
slower.
To avoid that, we simply take a snapshot of "cp_next_tx_seq" at the
time we're about to fan-out to more lanes.
Then we delay the transmission of messages enqueued on other lanes
with "cp_index > 0" until cp_index#0 caught up with the delivery of
new messages (from "cp_send_queue") as well as in-flight
messages (from "cp_retrans") that haven't been acknowledged yet
by the receiver.
We also add a new counter "mprds_catchup_tx0_retries" to keep track
of how many times "rds_send_xmit" had to suspend activities,
because it was waiting for the first lane to catch up.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon "sendmsg", RDS/TCP selects a backend connection based
on a hash calculated from the source-port ("RDS_MPATH_HASH").
However, "rds_tcp_accept_one" accepts connections
in the order they arrive, which is non-deterministic.
Therefore the mapping of the sender's "cp->cp_index"
to that of the receiver changes if the backend
connections are dropped and reconnected.
However, connection state that's preserved across reconnects
(e.g. "cp_next_rx_seq") relies on that sender<->receiver
mapping to never change.
So we make sure that client and server of the TCP connection
have the exact same "cp->cp_index" across reconnects by
encoding "cp->cp_index" in the lower three bits of the
client's TCP source port.
A new extension "RDS_EXTHDR_SPORT_IDX" is introduced,
that allows the server to tell the difference between
clients that do the "cp->cp_index" encoding, and
legacy clients that pick source ports randomly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new extension header type RDSV3_EXTHDR_RDMA_BYTES for
an RDMA initiator to exchange rdma byte counts to its target.
Currently, RDMA operations cannot precisely account how many bytes a
peer just transferred via RDMA, which limits per-connection statistics
and future policy (e.g., monitoring or rate/cgroup accounting of RDMA
traffic).
In this patch we expand rds_message_add_extension to accept multiple
extensions, and add new flag to RDS header: RDS_FLAG_EXTHDR_EXTENSION,
along with a new extension to RDS header: rds_ext_header_rdma_bytes.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a per connection workqueue which can be initialized
and used independently of the globally shared rds_wq.
This patch is the first in a series that aims to address tcp ack
timeouts during the tcp socket shutdown sequence.
This initial refactoring lays the ground work needed to alleviate
queue congestion during heavy reads and writes. The independently
managed queues will allow shutdowns and reconnects respond more quickly
before the peer(s) timeout waiting for the proper acks.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-2-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Per the RDS 3.1 spec [1], RDS extension headers EXTHDR_NPATHS and
EXTHDR_GEN_NUM are be16 and be32 values respectively, exchanged during
normal operations over-the-wire (RDS Ping/Pong). This contrasts their
declarations as host endian unsigned ints.
Fix the annotations across occurrences. Flagged by Sparse.
[1] https://oss.oracle.com/projects/rds/dist/documentation/rds-3.1-spec.html
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-5-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling as flagged by codespell.
With these changes in place codespell only flags false positives
in net/rds.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250619-rds-minor-v1-2-86d2ee3a98b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).
Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.
Fixes: 0f4b1c7e89 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eac ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr().
Fixes: 584a8279a4 ("RDS: RDMA: return appropriate error on rdma map failures")
Reported-and-tested-by: syzbot+d4faee732755bba9838e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable total_payload_len is being used to accumulate payload lengths
however it is never read or used afterwards. It is redundant and can
be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/cold/could/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-By: Devesh Sharma <devesh.s.sharma@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
This reverts commit 0c85a7e874.
The games with 'rm' are on (two separate instances) of a local variable,
and make no difference.
Quoting Aditya Pakki:
"I was the author of the patch and it was the cause of the giant UMN
revert.
The patch is garbage and I was unaware of the steps involved in
retracting it. I *believed* the maintainers would pull it, given it
was already under Greg's list. The patch does not introduce any bugs
but is pointless and is stupid. I accept my incompetence and for not
requesting a revert earlier."
Link: https://lwn.net/Articles/854319/
Requested-by: Aditya Pakki <pakki001@umn.edu>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
is freed and later under spinlock, causing potential use-after-free.
Set the free pointer to NULL to avoid undefined behavior.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "beween" to "between" in net/rds/send.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In testing with mprds enabled, Oracle Cluster nodes after reboot were
not able to communicate with others nodes and so failed to rejoin
the cluster. Peers with lower IP address initiated connection but the
node could not respond as it choose a different path and could not
initiate a connection as it had a higher IP address.
With this patch, when a node sends out a packet and the selected path
is down, all other paths are also checked and any down paths are
re-connected.
Reviewed-by: Ka-cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:
net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
358 | return ERR_PTR(ret);
Use a typical ERR_PTR return instead.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IN_MULTICAST's primary intent is as a uapi macro.
Elsewhere in the kernel we use ipv4_is_multicast consistently.
This patch unifies linux's multicast checks to use that function
rather than this macro.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Original commit from 2011 updated to include a change by
Yuval Shaia <yuval.shaia@oracle.com>
that adds a new statistic counter "send_stuck_rm"
to capture the messages looping exessively
in the send path.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS composite message(rdma + control) user notification needs to be
triggered once the full message is delivered and such a fix was
added as part of commit 941f8d55f6 ("RDS: RDMA: Fix the composite
message user notification"). But rds_send_remove_from_sock is missing
data part notify check and hence at times the user don't get
notification which isn't desirable.
One way is to fix the rds_send_remove_from_sock to check of that case
but considering the ordering complexity with completion handler and
rdma + control messages are always dispatched back to back in same send
context, just delaying the signaled completion on rmda work request also
gets the desired behaviour. i.e Notifying application only after
RDMA + control message send completes. So patch updates the earlier
fix with this approach. The delay signaling completions of rdma op
till the control message send completes fix was done by Venkat
Venkatsubra in downstream kernel.
Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
For RDMA transports, RDS TOS is an extension of IB QoS(Annex A13)
to provide clients the ability to segregate traffic flows for
different type of data. RDMA CM abstract it for ULPs using
rdma_set_service_type(). Internally, each traffic flow is
represented by a connection with all of its independent resources
like that of a normal connection, and is differentiated by
service type. In other words, there can be multiple qp connections
between an IP pair and each supports a unique service type.
The feature has been added from RDSv4.1 onwards and supports
rolling upgrades. RDMA connection metadata also carries the tos
information to set up SL on end to end context. The original
code was developed by Bang Nguyen in downstream kernel back in
2.6.32 kernel days and it has evolved over period of time.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
RDS Service type (TOS) is user-defined and needs to be configured
via RDS IOCTL interface. It must be set before initiating any
traffic and once set the TOS can not be changed. All out-going
traffic from the socket will be associated with its TOS.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer
Fixes: ea010070d0 ("net/rds: fix warn in rds_message_alloc_sgs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
per comment from Leon in rdma mailing list
https://lkml.org/lkml/2018/10/31/312 :
Please don't forget to remove user triggered WARN_ON.
https://lwn.net/Articles/769365/
"Greg Kroah-Hartman raised the problem of core kernel API code that will
use WARN_ON_ONCE() to complain about bad usage; that will not generate
the desired result if WARN_ON_ONCE() is configured to crash the machine.
He was told that the code should just call pr_warn() instead, and that
the called function should return an error in such situations. It was
generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be
triggered from user space need to be fixed."
in addition harden rds_sendmsg to detect and overcome issues with
invalid sg count and fail the sendmsg.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_send_mprds_hash(), if the calculated hash value is non-zero and
the MPRDS connections are not yet up, it will wait. But it should not
wait if the send is non-blocking. In this case, it should just use the
base c_path for sending the message.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the IPv6 dependency from RDS.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, code at label *out* is unreachable. Fix this by updating
variable *ret* with -EINVAL, so the jump to *out* can be properly
executed instead of directly returning from function.
Addresses-Coverity-ID: 1472059 ("Structurally dead code")
Fixes: 1e2b44e78e ("rds: Enable RDS IPv6 support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the
listener is now an IPv6 endpoint which accepts both IPv4 and IPv6
connection requests. RDS/RDMA/IB uses a private data (struct
rds_ib_connect_private) exchange between endpoints at RDS connection
establishment time to support RDMA. This private data exchange uses a
32 bit integer to represent an IP address. This needs to be changed in
order to support IPv6. A new private data struct
rds6_ib_connect_private is introduced to handle this. To ensure
backward compatibility, an IPv6 capable RDS stack uses another RDMA
listener port (RDS_CM_PORT) to accept IPv6 connection. And it
continues to use the original RDS_PORT for IPv4 RDS connections. When
it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to
send the connection set up request.
v5: Fixed syntax problem (David Miller).
v4: Changed port history comments in rds.h (Sowmini Varadhan).
v3: Added support to set up IPv4 connection using mapped address
(David Miller).
Added support to set up connection between link local and non-link
addresses.
Various review comments from Santosh Shilimkar and Sowmini Varadhan.
v2: Fixed bound and peer address scope mismatched issue.
Added back rds_connect() IPv6 changes.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the internal representation of an IP address to use
struct in6_addr. IPv4 address is stored as an IPv4 mapped address.
All the functions which take an IP address as argument are also
changed to use struct in6_addr. But RDS socket layer is not modified
such that it still does not accept IPv6 address from an application.
And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to
send a message. Suppose the RDS connection is not yet up. In
rds_send_mprds_hash(), it does
if (conn->c_npaths == 0)
wait_event_interruptible(conn->c_hs_waitq,
(conn->c_npaths != 0));
If it is interrupted before the connection is set up,
rds_send_mprds_hash() will return a non-zero hash value. Hence
rds_sendmsg() will use a non-zero c_path to send the message. But if
the RDS connection ends up to be non-MP capable, the message will be
lost as only the zero c_path can be used.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been
specified, the rm->data.op_mmp_znotifier allocation will be skipped.
In this case, it is invalid ot pass down a cmsghdr with
RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this
case.
Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465362 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and,
if the SO_ZEROCOPY socket option has been set on the PF_RDS socket,
application pages sent down with rds_sendmsg() are pinned.
The pinning uses the accounting infrastructure added by
Commit a91dbff551 ("sock: ulimit on MSG_ZEROCOPY pages")
The payload bytes in the message may not be modified for the
duration that the message has been pinned. A multi-threaded
application using this infrastructure may thus need to be notified
about send-completion so that it can free/reuse the buffers
passed to rds_sendmsg(). Notification of send-completion will
identify each message-buffer by a cookie that the application
must specify as ancillary data to rds_sendmsg().
The ancillary data in this case has cmsg_level == SOL_RDS
and cmsg_type == RDS_CMSG_ZCOPY_COOKIE.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing model holds a reference from the rds_sock to the
rds_message, but the rds_message does not itself hold a sock_put()
on the rds_sock. Instead the m_rs field in the rds_message is
assigned when the message is queued on the sock, and nulled when
the message is dequeued from the sock.
We want to be able to notify userspace when the rds_message
is actually freed (from rds_message_purge(), after the refcounts
to the rds_message go to 0). At the time that rds_message_purge()
is called, the message is no longer on the rds_sock retransmit
queue. Thus the explicit reference for the m_rs is needed to
send a notification that will signal to userspace that
it is now safe to free/reuse any pages that may have
been pinned down for zerocopy.
This patch manages the m_rs assignment in the rds_message with
the necessary refcount book-keeping.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An rds_connection can get added during netns deletion between lines 528
and 529 of
506 static void rds_tcp_kill_sock(struct net *net)
:
/* code to pull out all the rds_connections that should be destroyed */
:
528 spin_unlock_irq(&rds_tcp_conn_lock);
529 list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node)
530 rds_conn_destroy(tc->t_cpath->cp_conn);
Such an rds_connection would miss out the rds_conn_destroy()
loop (that cancels all pending work) and (if it was scheduled
after netns deletion) could trigger the use-after-free.
A similar race-window exists for the module unload path
in rds_tcp_exit -> rds_tcp_destroy_conns
Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled
by checking check_net() before enqueuing new work or adding new
connections.
Concurrency with module-unload is handled by maintaining a module
specific flag that is set at the start of the module exit function,
and must be checked before enqueuing new work or adding new connections.
This commit refactors existing RDS_DESTROY_PENDING checks added by
commit 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with
connection teardown") and consolidates all the concurrency checks
listed above into the function rds_destroy_pending().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
