Add tests for cleanup after a batched RTM_NEWACTION request fails.
Replace an existing gact action bound to a filter, then fail a later
entry by requesting goto chain without a classifier context.
Check that the bound action's reference count returns to its original
value. Also cover a successfully initialized new action between the
bound action and the failing entry, verifying that its reserved index
can be reused. Repeat the bound action in another batch to check that
each temporary reference to the same action is released.
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260909070336.32979-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks.
Fixes: 55334a5db5 ("net_sched: act: refuse to remove bound action outside")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260909070336.32979-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3db7d7d583 ("drm/ttm: fix swapped-out resources never leaving
their bulk_move range") landed in drm-misc-fixes with its one-line
change applied to the wrong "if": the "if (ret)" after
ttm_resource_try_charge() in ttm_bo_alloc_at_place() became
"if (ret > 0)", while the "if (!ret)" after ttm_tt_swapout() in
ttm_bo_swapout_cb() that the patch targeted was left untouched.
ttm_resource_try_charge() returns 0 or a negative error code, so with
"ret > 0" a failed dmem cgroup charge no longer fails the allocation.
Restore that check and apply the intended change: ttm_tt_swapout()
returns the number of pages swapped out on success, so the bulk_move
removal must run for ret > 0.
Fixes: 3db7d7d583 ("drm/ttm: fix swapped-out resources never leaving their bulk_move range")
Cc: stable@vger.kernel.org # v7.1+
Signed-off-by: Vadim Nikitushkin <bub4z0r@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260910143451.65853-1-bub4z0r@gmail.com
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-09-08 (idpf, ice)
For idpf:
Myeonghun Pak adds calls to disable DIM work and PTM to allow for proper
cleanup.
Josh adds check, and adjustment, for VLAN headers when processing RSC
packets.
For ice:
Jake adds call to xa_destroy for xarray sched_node_ids; also moving it
from port_info struct to ice_hw to simplify its lifecycle management.
Jakub Kicinski stores trace event data as scalars instead of
dereferencing pointers in TP_printk(), preventing use-after-free issues
during event printing and eliminating double-dereference warnings.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
eth: ice: don't dereference pointers from TP_printk()
ice: add missing xa_destroy for sched_node_ids
idpf: account for VLAN header when parsing RSC packet header
idpf: disable PTM on probe failure and on remove
idpf: disable DIM work before freeing q_vectors
====================
Link: https://patch.msgid.link/20260908214502.528440-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RME HDSPe AIO PCI express audio card has a new PCI vendor ID (1d18)
while keeping the same device ID (3fc6). The card seems working fine by
just adding the new ID.
While we're at it, use the standard macro to cleann up the existing PCI
ID entry, too.
Reported-by: AtmanActive <alsa.atmanactive.3dfqt@slmail.me>
Closes: https://lore.kernel.org/178674392532.7.10140952469564861620.1550442282@slmail.me
Tested-by: AtmanActive <alsa.atmanactive.3dfqt@slmail.me>
Link: https://patch.msgid.link/20260910144204.973359-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ESP and AH cases in get_ipv6_ext_hdrs() used IPPROTO_FRAGMENT instead
of OFPIEH12_FRAG when checking for out-of-order extension headers, causing
the fragment header to not be recognised as a valid predecessor.
The original code used IPPROTO_FRAGMENT (44) as a bitmask constant where
OFPIEH12_FRAG (1 << 4 = 16) was intended. IPPROTO_FRAGMENT encodes bits
2, 3 and 5 (OFPIEH12_AUTH | OFPIEH12_DEST | OFPIEH12_ROUTER), but not
bit 4 (OFPIEH12_FRAG). This caused incorrect OFPIEH12_UNSEQ verdicts in
both the ESP and AH arms: the ESP arm failed to whitelist OFPIEH12_FRAG,
while the AH arm accidentally whitelisted OFPIEH12_AUTH.
With the fix, a packet with two AH headers now also gets OFPIEH12_UNSEQ
in addition to OFPIEH12_UNREP, matching the ESP arm which already sets
UNSEQ on a repeat, which is the intended behavior.
Fixes: 28a3f06017 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/1b1582eb07550d71f3cbe210e5cb31eeb8d0ad86.1788876917.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8d
("ipmr: remove hard code cache_resolve_queue_len limit").
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/050b58f7fc6b45da0fb12768ebb62d18fa46133d.1788784801.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dp83td510_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
so far and passes it on, and phy_probe() returns it. A device tree marking
a DP83TD510 LED as 'active-high', which leds/common.yaml allows and
ethernet-phy.yaml references for led@N nodes, thus leaves the mdio device
unbound, so phy_attach_direct() falls back to the genphy driver, which
cannot drive this 10BASE-T1L single-mode PHY, so the interface has no
usable link.
The callback initializes polarity to DP83TD510E_LED_POLARITY(index), which
is the active-high setting, so the request is already satisfied and only
the case label is missing.
Cc: stable@vger.kernel.org
Fixes: 5b281fe7e3 ("net: phy: dp83td510: introduce LED framework support")
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260908105959.70453-3-donggeunyoo.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gem_ptp_init() registers the PTP clock before initializing
bp->tsu_clk_lock and the TSU hardware. Since ptp_clock_register()
publishes the PTP character device, userspace may invoke PTP callbacks
before the lock and hardware are ready.
In addition, gem_ptp_init() is called from both the interface open and
resume paths. Reinitializing tsu_clk_lock there can reset the lock while
timestamp processing is using it.
This race is theoretical and has not been observed in practice.
Initialize tsu_clk_lock once during probe and initialize the TSU before
registering the PTP clock.
Fixes: ab91f0a9b5 ("net: macb: Add hardware PTP support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20260904030439.3994047-1-runyu.xiao@seu.edu.cn/
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260908103924.607033-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hsr_portdev_setup() skips promiscuous mode on non-master ports when
hsr->fwd_offloaded is set. fwd_offloaded is derived only from the ring
slaves' NETIF_F_HW_HSR_FWD bit, so this also skips it for the interlink
port, which never gets forwarding offload. Without promiscuous mode,
the interlink NIC drops unicast frames addressed to hsr_dev's MAC
(e.g. SAN traffic to the RedBox), breaking RedBox whenever the ring is
HW-offloaded.
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260908090856.2876114-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race.
Fixes: 8d2ca1d7b5 ("ipv6: avoid high order memory allocations for /proc/net/ipv6_route")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/89699735763f6c297584d7c2ff106239cc1e8ce0.1788837093.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS context descriptor.
For a highly fragmented TSO skb the check can therefore pass even when the
ring has too few free slots. stmmac_tso_allocator() then writes past the
available descriptors, overwriting descriptors still owned by the DMA
engine, corrupting the TX ring.
Add stmmac_tso_get_num_desc() to compute the exact number of descriptors
needed for the header, the linear payload and each fragment, plus the MSS
context descriptor when required, and use it in the availability check.
Fixes: f748be531d ("stmmac: support new GMAC4")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260907-stmmac-fix-tso-nfrags-check-v1-1-328459906cdb@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes.
Fixes: 7875e18e09 ("RDS: Message parsing")
Signed-off-by: Greg Marsden <greg.marsden@oracle.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/apxJjxvStibPI0AS@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length.
Fixes: 754209850d ("RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Link: https://patch.msgid.link/20260908085520.1746329-1-Jeremy.Jean@oss.cyber.gouv.fr
Assisted-by: Codex:gpt-6
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check the wakeup condition after adding the task to the waitqueue and
updating the task state to avoid missing a racing modem status update or
disconnect.
Store the old icount on entry and do not update it in the completion
handler to avoid missing events or reporting spurious ones (due to modem
status changes before TIOCMIWAIT was called).
Fixes: 5a6a62bdb9 ("cdc-acm: add TIOCMIWAIT")
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260907095130.130636-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cd321x_update_work() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero.
Fixes: 82432bbfb9 ("usb: typec: tipd: Handle mode transitions for CD321x")
Cc: stable <stable@kernel.org> # 6.18+
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260906131942.83153-3-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tps6598x_connect() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero.
Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable <stable@kernel.org> # 5.15+
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260906131942.83153-2-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "truinst" sysfs attribute. An emulated/malicious USB device
(VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes
of stale kernel heap memory (kmalloc-64) to unprivileged userspace,
once per sysfs read, indefinitely. On kernels built without
init_on_alloc this leaks recently freed heap contents.
Only accept the transfer when the full structure was received.
sierra_ms_init() already retries failed queries, so well-behaved
devices are unaffected.
Fixes: 32fe5e3934 ("USB Storage Sierra: TRU-Install feature update")
Cc: stable <stable@kernel.org>
Signed-off-by: Syed Labeeq Sajid Bukhari <syedlabeeq@gmail.com>
Assisted-by: Kimi:K2 [Kimi Code CLI]
Link: https://patch.msgid.link/20260910140343.49371-1-syedlabeeq@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reset the port if the tcpm fails to start the FAST_ROLE_SWAP AMS by
initiating error recovery on it.
This helps in cases where some cables (incorrectly) signal an FRS to
an FRS capable port during disconnection. The TCPC autonomously starts
sourcing VBUS on detecting the FRS signal. However, the VBUS sourcing is
left on when the FAST_ROLE_SWAP AMS fails to start (as tcpm_sink_tx_ok
is 0 as CC is open due to the cable disconnect). This is because the
code sets the state to INVALID_STATE without resetting the port state.
Log snippet before changes:
[ 101.401960] AMS FAST_ROLE_SWAP start
[ 101.401971] Sink TX No Go
[ 101.401982] sourcing vbus
[ 101.401987] VBUS on
[ 101.402159] VBUS on
[ 109.257809] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_READY, polarity 1, disconnected]
[ 111.267442] VBUS on
After changes:
[ 70.541211] AMS FAST_ROLE_SWAP start
[ 70.541220] Sink TX No Go
[ 70.541228] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[ 70.541362] VBUS on
[ 70.541365] sourcing vbus
[ 70.541367] VBUS on
[ 70.541374] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[ 70.541410] disable vbus discharge ret:0
[ 70.543028] Setting usb_comm capable false
[ 70.544009] Setting voltage/current limit 0 mV 0 mA
[ 70.544034] polarity 0
[ 70.544239] Requesting mux state 0, usb-role 0, orientation 0
[ 70.555550] cc:=0
[ 70.555595] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[ 70.555697] VBUS off
[ 70.555702] VBUS VSAFE0V
[ 70.555762] CC1: 5 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 70.587794] VBUS off
[ 70.587799] VBUS VSAFE0V
[ 70.655672] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 70.655682] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev3 NONE_AMS]
[ 70.655686] Start toggling
[ 70.656274] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
Fixes: 0908c5aca3 ("usb: typec: tcpm: AMS and Collision Avoidance")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260903-frs-error-handling-v1-1-ad0fee541847@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the
wakeup timer. dwc2_hcd_free() currently deletes the timer only after
freeing host-owned state, and timer_delete() does not synchronize a
callback or prevent it from being queued again.
Stop and shut down the timer in dwc2_hcd_release(), before the HCD
resources are freed. This covers both the HCD initialization error path
and normal HCD removal.
Fixes: 7359d482eb ("staging: HCD files for the DWC2 driver")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:GPT-5
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260904065323.4047026-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc3_ti_probe() takes a runtime PM reference with pm_runtime_get_noresume()
before creating the dwc3 core child device, and releases it with
pm_runtime_put_autosuspend() once probe has succeeded. The err_pm_disable
error path only disables runtime PM, so the reference taken a few lines
earlier is never dropped.
The usage counter lives in struct device and is not reset when the driver
is unbound, so the leaked reference outlives the failed probe. If the
device is probed again, through a manual rebind or a module reload, the
counter starts at one instead of zero and the pm_runtime_put_autosuspend()
on the success path can no longer bring it back down. The wrapper then
stays runtime resumed for good and autosuspend never kicks in.
Drop the reference before disabling runtime PM, matching the ordering
already used in dwc3_ti_remove().
Fixes: e8784c0aec ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260902-dwc3-am62-rpm-fix-v1-1-7a2807e33307@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cvmx_usb_schedule() enables the SOF interrupt whenever any pipe has
next_tx_frame in the future, and leaves it enabled until the transfer
is due. An interrupt endpoint keeps such a deadline pending
permanently, so a single attached hub (status pipe polled every 256ms)
costs an interrupt on every SOF - 8000/s in high-speed mode, forever.
On a 300MHz CN5020 that is measurably ~20% of one core spent counting
frames.
The frame counter is resynchronized from HFNUM at the top of every
poll, so the driver does not actually need to see every SOF to know
when a deadline arrives. Sleep on an hrtimer when the nearest deadline
is more than a few frames away (one high-speed frame is 125us) and
keep SOF interrupts only for deadlines that are imminent - or far
enough away to risk the 16383-frame HFNUM wrap, where the interrupt
path still tracks the counter extension.
Measured on a CN5020 board with one 4-port hub attached and idle:
8200 -> 4 USB interrupts/s, with no change in enumeration or transfer
behavior.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Link: https://patch.msgid.link/20260901193100.1352110-3-orgads@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the USBN clock/PHY setup did not actually bring the core up (wrong
board reference-clock configuration, for instance), every USBC CSR
reads as all-ones and initialization marches on programming garbage,
ending in timeouts or a wedge deep in the FIFO flush.
Read GHWCFG3 - a hardwired configuration register that can be neither
0 nor all-ones on a live core - right before core initialization, and
give up cleanly if the core is not answering.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Link: https://patch.msgid.link/20260901193100.1352110-2-orgads@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cvmx_wait_tx_rx() computes its 100us deadline from
(u64)octeon_get_clock_rate - the address of the function, not its
return value; the parentheses have been missing since the
CVMX_WAIT_FOR_FIELD32 macro became a function. The cast makes it
compile silently, and the resulting deadline is effectively infinite.
On a healthy controller the flush bit clears on the first read and
nothing is noticed. On a controller whose PHY did not come up (for
example when the reference-clock configuration is wrong for the board),
txfflsh/rxfflsh never clear and probe spins forever in __delay() -
observed as a hard hang with a soft-lockup splat on a CN5020 board,
where the board watchdog then resets the system with no console output.
Call the function, restoring the 100us timeout the code always
intended.
Fixes: 3e195a80e0 ("Staging: octeon-usb: Replaces CVMX_WAIT_FOR_FIELD32 macro with a function")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Link: https://patch.msgid.link/20260901193100.1352110-1-orgads@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for.
Reported-by: Mathieu Fluhr <mathieu.fluhr@gmail.com>
Link: https://lore.kernel.org/all/CAPyJwA_D9qw0T72f8zwM1yKjP+To=maVANbcdsWM7yRmbBxYvw@mail.gmail.com/
Cc: stable <stable@kernel.org>
Fixes: 8f5b7e2bec ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs")
Signed-off-by: Lovekesh Solanki <lovekeshsolanki00@gmail.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260903112903.542719-1-lovekeshsolanki00@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When probe fails after the chip was already in APP mode (booted from
EEPROM), the err_reset_controller path unconditionally calls
tps->data->reset(), which for tps25750 sends the GAID 4CC command.
GAID transitions the chip from APP back to PTCH, causing a second
probe attempt that sees PTCH mode and tries to load the firmware from
/lib/firmware, instead of reading the EEPROM as it should.
The err_reset_controller path can be triggered by -EPROBE_DEFER from
the probe sequence. GAID should only be sent when the controller
actually loaded firmware at probe time.
The abnormal behavior was seen on a tps25751d that has an EEPROM
connected to it.
Fixes: d49f908220 ("usb: typec: tipd: add init and reset functions to tipd_data")
Cc: stable <stable@kernel.org>
Signed-off-by: Marian Rotariu <marian.c.rotariu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260806085302.1307606-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path.
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260904202640.3900685-1-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a274465cc3 ("net: phy: support 'active-high' property for PHY
LEDs") added PHY_LED_ACTIVE_HIGH and made of_phy_led() set the matching
bit in the modes mask when a LED node carries the 'active-high'
property. dp83867 was not part of that series.
dp83867_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
so far and passes it on, and phy_probe() fails. A device tree marking a
DP83867 LED as 'active-high', which leds/common.yaml allows and
ethernet-phy.yaml references for led@N nodes, thus stops the PHY from
probing.
Active high is what the function programs when no polarity mode is
requested at all, so the initial value of polarity already satisfies the
request and only the case label is missing.
The same series updated mxl-gpy in commit eb89c79c1b ("net: phy:
mxl-gpy: correctly describe LED polarity") and aquantia in
commit 9d55e68b19 ("net: phy: aquantia: correctly describe LED
polarity override").
Fixes: a274465cc3 ("net: phy: support 'active-high' property for PHY LEDs")
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Link: https://patch.msgid.link/20260903022839.4006614-1-donggeunyoo.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rvu_dbg_rvu_pf_cgx_map_display() locates each RVU PF PCI device via
pci_get_domain_bus_and_slot() when printing the PF-to-CGX map. It
assumed PF0 always sits on PCI bus 1 and derived other PF bus numbers
as pf + 1, but the AF device can be enumerated on a different bus.
Use rvu->pdev->bus->number as the base bus instead, so each PF lookup
uses pf + start on systems where RVU functions are on contiguous buses
but do not start at bus 1.
Fixes: e2fb373038 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260904085114.3385530-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__xfs_healthmon_insert() asserts that hm->lock is held
(lockdep_assert_held), but xfs_ioc_health_monitor() called it right
after allocating hm, before ever taking the lock, triggering a
lockdep warning.
Take hm->lock around the call.
Fixes: b3a289a2a9 ("xfs: create event queuing, formatting, and discovery infrastructure")
Reported-by: syzbot+ccdf3469f5f653bff7ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ccdf3469f5f653bff7ac
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_iomap_set_anon_write does not set IOMAP_F_INTEGRITY based on
bdev_has_integrity_csum(), so file system PI generation is silently
skipped for zoned writes on integrity-enabled devices, and left to
the block layer PI generation.
Fixes: 6bbb4d96f7 ("xfs: support T10 protection information")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
[hch: ported to the recently introduced xfs_iomap_set_anon_write()]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When xlog_force_lsn sets log_flushed, it has just called xlog_force_iclog
through xlog_force_and_check_iclog, which sets XLOG_ICL_NEED_FLUSH before
writing out the head iclog. This means that we already flushed the log,
data, and (with the recent fix) RT devices before writing out the iclog
start record and no extra cache flushed is required.
This optimizes the external log case, and fixes a performance regression
due to double RT dev flushes with "xfs: also flush the RT device cache in
xlog_write_iclog".
The explicit flush of the data that the device resides on when no iclog
was written out is still required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
As soon as we get an error from cache flushing or log forcing, there
is no point in continuing as the data integrity is already impacted.
Return the error instead of continuing to do more work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The cache flush before writing the CIL start record no only needs to
ensure any metadata covered by the overwritten part of the log is on
stable storage, but also that any data pointed to by metadata logged
is on stable storage, as otherwise log recovery could created allocated
blocks that point to stale data. Fortunately the code already
handles this right for the data device, but it also needs to flush
the RT device for this to work for data on the RT device.
Also update the comments to explicitly mention this case.
This omission goes back to the first days of cache control in XFS.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill
can fail, but we don't check the result of xagb_bitmap_walk, so we
silently drop the error and proceed with inconsistent incore data.
That shouldn't be allowed.
Cc: stable@vger.kernel.org # v6.6
Fixes: 014ad53732 ("xfs: use per-AG bitmaps to reap unused AG metadata blocks during repair")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM complains that we can't undo an attempt at fixing the AGFL if
anything goes wrong during the rewrite, so take a snapshot of the whole
buffer so that we can restore it. Move the xrep_agfl_update_agf call so
that we only update the AGF if the AGFL update is 100% successful.
While we're at it, fix leaking the used_extents bitmap if the disunion
operation fails.
Cc: stable@vger.kernel.org # v4.19
Fixes: 0e93d3f43e ("xfs: repair the AGFL")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Remove this useless code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a new counter so that we can track the number of runtime failures
encountered during scrubs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM also notices that I forgot to expose the "clean bill of health"
scrub stats. Fix that.
Cc: stable@vger.kernel.org # v6.9
Fixes: a1f3e0cca4 ("xfs: update health status if we get a clean bill of health")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM complains about concurrency problems in the scrub stats code
because xchk_stats_format doesn't synchronize in any way with updates.
These stats are only reported through debugfs so I don't think it really
matters, but I guess I exist to make bots happy now.
Note: We snapshot the entire stats object with a spinlock so that we
don't have to worry about users seeing slightly weird numbers (e.g.
invocations has incremented but none of the outcomes have been yet) if
we race with xchk_stats_merge_one. This isn't a hot path.
Cc: stable@vger.kernel.org # v6.6
Fixes: d7a74cad8f ("xfs: track usage statistics of online fsck")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean.
Fixes: b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure")
Cc: stable@vger.kernel.org # v7.1+
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5387
Link: https://lore.kernel.org/dri-devel/CAHYiNPa6aVacJoLOje-qZ1GyYx-9p0tN4NuP8D_eSL+UJeevXw@mail.gmail.com/
Signed-off-by: Vadim Nikitushkin <bub4z0r@gmail.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260909205028.13799-1-bub4z0r@gmail.com
The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was
registered before that state was initialized, while teardown released the
buffer before free_irq() synchronized the handler.
Initialize the EQ without arming it, register the IRQ, and then arm it.
Reverse the resource order during teardown by freeing the IRQ before
destroying the EQ.
Fixes: 2a152512a1 ("RDMA/efa: CQ notifications")
Link: https://patch.msgid.link/20260907-use-after-free-of-admin-queue-struct-v1-2-dd9d9267fbf4@nvidia.com
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The management IRQ handler accesses both the admin completion queue and the
async event queue. The driver registered the IRQ before constructing these
queues and destroyed them before freeing the IRQ, so the handler's lifetime
was not contained by the resources it accesses.
Initialize the queues with interrupts masked, request the IRQ, and then
switch to interrupt mode. On removal, reset the device and free the IRQ
before destroying the queues. Also reset the device before destroying the
queues if IRQ registration fails, because the device already has their DMA
addresses.
Fixes: b7f5e880f3 ("RDMA/efa: Add the efa module")
Link: https://patch.msgid.link/20260907-use-after-free-of-admin-queue-struct-v1-1-dd9d9267fbf4@nvidia.com
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Using the DMA in cyclic mode modifies the hardware buffer descriptor
chain in xilinx_dma_prep_dma_cyclic so that the last descriptor used by
the cyclic transfer points back to the first descriptor, but it never
restores the original descriptor ring. This breaks using non-cyclic mode
after cyclic mode with an error like:
xilinx-vdma 86000000.dma: Channel 00000000354d5c8d has errors 100, cdr 6de40000 tdr 6de40400
The only way to get out of this error state is to rebuild the hardware
buffer descriptor ring by releasing and re-acquiring the channel.
Fix using non-cyclic mode after cyclic mode by always restoring the
original buffer descriptor ring in the same manner as it is set up by
xilinx_dma_alloc_chan_resources().
Fixes: 23059408b6 ("dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario")
Signed-off-by: Alex Bereza <alex@bereza.email>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20260817-fix-hw-buf-desc-after-cyclic-mode-v1-1-1fe47e701d6c@bereza.email
Link: https://patch.msgid.link/20260818-fix-hw-buf-desc-after-cyclic-mode-v2-1-530ff44c6a81@bereza.email
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MT7530 internal GE PHY advertises EEE by hardware default, but its
EEE support is defective: with EEE advertised, some link partners fail
to establish a stable link. On a 2-pair (4-wire) cable where both ends
advertise gigabit, 1000BASE-T training cannot succeed, and instead of
falling back to 100 Mbps the port loops, so no link or DHCP lease is
ever obtained. MediaTek confirms the hardware is the root cause (Landen
Chao, 2021): "EEE of the 10-year-old MT7530 internal gephy has many IOT
problems, so it is recommended to disable its EEE."
mtk_gephy_config_init() used to clear the EEE advertisement early, but
commit af3b4b0e59 ("net: phy: mediatek-ge: do not disable EEE
advertisement") removed that on the rationale that the DSA subdriver
already performs an early disable. That holds for MT7531, whose
mt7531_setup() clears MDIO_AN_EEE_ADV on each switch PHY, but not for
the MT7530 PHY: neither the MT7621 integrated switch nor the dedicated
MT7530 IC ever had such a loop, so removing it left those boards
without any working early EEE disable and the link flapping came back.
Since the broken hardware is the PHY, fix it in the PHY driver so it
covers all users of this PHY, integrated in a switch or standalone:
- clear MDIO_AN_EEE_ADV in probe(), as early as possible, before
anything can negotiate EEE with the link partner;
- clear it again in config_init() and call phy_disable_eee() there.
config_init() is what phy_init_hw() replays after a PHY reset, when
the register is back at its EEE-advertising hardware default, and
it runs after of_set_phy_eee_broken() in phy_probe(), so the
eee_disabled_modes mask survives and neither phylib nor userspace
can re-enable EEE. dp83867 disables broken EEE from config_init()
the same way.
Auto-negotiation then falls back to a stable 100 Mbps link instead of
looping at gigabit. Tested on ASUS RT-AX53U (MT7621): with a 2-pair
cable on the WAN port, a single clean 100 Mbps link comes up and a
DHCP lease is obtained, where the unpatched driver loops.
Fixes: af3b4b0e59 ("net: phy: mediatek-ge: do not disable EEE advertisement")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladislav Karmanov <vladislav.karmanov.dev@gmail.com>
Link: https://patch.msgid.link/20260908145213.3976508-1-vladislav.karmanov.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Devmem tcp tx doesn't work without zero-copy, however it's not currently
enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked()
will try the copy path and try to copy data from an iovec which consists
of offsets into the dma-buf and would normally fail. Moreover,
d9c56501c7 ("net: tcp: block mixing readable and unreadable frags")
relies on that and assumes that the devmem binding is present IFF we're
using the zero-copy path, which can be used to mix net-iov and pages in
a single skb, and break invariants. Let's reject devmem tx without
zero-copy.
Note, the parameter check the patch is modifying is too loose, we can
create an io_uring request with dmabuf_id and all ZC flags, but which
won't have the binding. We replace it with stricter validation.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Fixes: d9c56501c7 ("net: tcp: block mixing readable and unreadable frags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/fdc2478d8f21268d7078556409887d8e6ba0ad32.1788529053.git.asml.silence@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For legacy 32-bit Tegra devices, the warning in the
tegra_pmc_enter_suspend_mode() function is being triggered because the
early_pmc->rate variable is never configured and hence, always 0. This
issue started occurring after updating the PMC driver to create the PMC
context dynamically which causes the 'rate' to be set in the new dynamic
context, but missed updating the rate in the early PMC context.
Fix this by initialising the early_pmc->rate variable for 32-bit Tegra
devices when the rate for the PMC context is initialised.
Fixes: 4d61f03426 ("soc/tegra: pmc: Create PMC context dynamically")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[treding@nvidia.com: move assignment to existing #ifdef block]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The pmic_glink client is released by the devres cleanup, which runs
after pmic_glink_ucsi_remove() has returned, so its notification
callbacks can queue work until then. Work that runs after
ucsi_unregister() has been called touches freed state: it dereferences
the connector array that ucsi_unregister() freed, or registers and
unregisters the instance a second time.
Disable both work items with disable_work_sync() before unregistering,
and unregister only if the instance is still registered.
This issue was found by an in-house static analysis tool.
Fixes: 62b5412b1f ("usb: typec: ucsi: add PMIC Glink UCSI driver")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Link: https://lore.kernel.org/r/20260227190430.889-1-nathan.c.rebello@gmail.com
Co-developed-by: Song Li <songl@zju.edu.cn>
Signed-off-by: Song Li <songl@zju.edu.cn>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260908060216.616045-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated.
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20260817-dmaengine-pxa-v1-1-850c215c1196@pengutronix.de
Link: https://patch.msgid.link/20260817-dmaengine-pxa-v2-1-f42ab0569a48@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
