mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
No description
- C 96.8%
- Assembly 0.9%
- Rust 0.7%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
A couple of core fixes, the rest usual mix of driver issues that surfaced from merge window until now. core - buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned() that the full buffer is zeroed. - trigger: Cancel reenable_work() before freeing the trigger that might be re-enabled. dma-buffer - Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused entry the mapping might walk off the end. adi,ade9000 - Wait for power up before requesting interrupts. - Fix overlap in scan index for current and voltage channels. - Ensure Phase C dip event included in IRQ1 handler. adi,adf4377 - Initialize all of a clk_init_data. adi,adis* - Ensure debugfs reads are finished before unbind. adi,axi-adc - Initialize mutex. adi,admv1013 - Ensure mutex is intialized before notifier that might use it is registered. - Fix wrong channel field used for read_raw. allwinner,sun4i - Drop a pm_runtime_put() when there was no get. - Ensure correct cleanup on driver probe fail due to any issues with the thermal zone. aspeed,adc, - Don't eat reset deassert errors. awinic,aw96103 - Make sure firmware length is validated rather than blindly trusting it. bosch,bmp280 - Fix out of bounds lookup of sampling frequency due to indexing based on elements in matrix rather than just the correct dimension. invensense,timestamp library - Ensure time estimate doesn't invert wrt to current time in a corner case occasionally seen. kionix,kx022a - Off by one in array boundary check. - Close a memory leak and state corruption in error path. maxim,max1363 - Sign extend bipolar values to ensure correct reporting to userspace. maxim,max30102 - Fix NULL dereference by checking there is data in the FIFO before trying to do anything with it. microchip,mcp47a1 - Ensure highest possible value actually settable. pulsed-light,lidar-lite - Don't leak the IIO device registration if runtime pm setup fails particularly as it was being freed. rockchip,saradc - Fix wrong fallback compatible for rv1106 that lead to trying to use too many channels (correct support will follow next merge window) rohm,bd79124 - Correct limit used for rising alarms. - Fix which registers related to limits are used in initialization. - Apply GPIO mask to allow subset of GPIOs to be toggled. - Add missing regmap error handling in a few places. - Ensures scale is read only. rohm,bm1390 - Don't silently eat a data read error. rohm,bu27034 - Don't silently eat error when reading gain. - Ensure we infinite delay doesn't happen on error. semtech,sx9324 - Fix wrong proximity channel resolution. sharp,gp2ap020a00f - Make sure to drain irq_work in remove path. st,vl5310x - Ensure direct mode is claimed for read_raw avoiding corruption of buffered accesses. vishay,vcnl3020 - Use write bits for ISR mask and ensure right event reported. vti,sca3000 - Fix up a condition check for the frequency divider. xilinx,xadc - Swap registration of cleanup of work with that of irq to ensure that no irqs can cause work that has been freed to be queued. x-powers,axp288 - Add bias override quirk for Haier HV103H. Fix because we used to always override then moved to trusting the firmware setup - which fixed some boards, but broke others. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmqjNCIRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FohFeA//apYJFiljUxBhFP1nxlsvOgYVmz2ovOR7 OdG+0smJdWTFM2b8Pu5MA8b/ls48mjyJHCueqe+OP8e7xGhiT0jFObzrJRHomJ72 66XmAE/X3cYC6BPChtU6fn65CnxrHZWhBVzEsO2CxQ8MM5nbhQsl+XjgUG3jCach DcZIdJAstgi8Ao3ju364saj9k9o3DF5IwHW5Y0bIq3H50X67oEOBo5vfIcFUjnYj RZHzvmwBnt9ar5ivKPPrIqv0j0OccRvCzp6X6A1IO8aeHJe2Ow+IOqFGJhxPYydr YHKo5cJZtxYK4Re6eFqATPe7boKuJJIxhU5wimT10pLKA38bBbqQlSoq9P/vvCrW MLCcRE83pHwS0vxjiJWfeZVdkfQmDnNtpBXoiCvk6iucsoXg3rniuzC3RG9iUiMx Xr1DiQ5QRJdQrSRCWqfJpQDnMrAJoXk9dDc1e1LFyKKPjvsI0jZJdfmsCdf8MNHS ssC7XHaLMpqIHYMsASFQLOoO1Bw6khcyxLeAVFxwNWQmVIOnQvbB9Jv7WxmR5nse CuC1NKgpnaKvH/vQYgCNWOP8TVAaLu3iUuLx6Q6zzS8MmnjkvsEn8zeQI31pKtun 6rdG9gC/pA2qsu0Kt0uwMKuGVQNF1qTT4Sf3ZYQhoJ9iYW7liQFytz4ooptjszNM IDv8BGnVT7c= =gbfP -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 7.3 cycle. A couple of core fixes, the rest usual mix of driver issues that surfaced from merge window until now. core - buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned() that the full buffer is zeroed. - trigger: Cancel reenable_work() before freeing the trigger that might be re-enabled. dma-buffer - Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused entry the mapping might walk off the end. adi,ade9000 - Wait for power up before requesting interrupts. - Fix overlap in scan index for current and voltage channels. - Ensure Phase C dip event included in IRQ1 handler. adi,adf4377 - Initialize all of a clk_init_data. adi,adis* - Ensure debugfs reads are finished before unbind. adi,axi-adc - Initialize mutex. adi,admv1013 - Ensure mutex is intialized before notifier that might use it is registered. - Fix wrong channel field used for read_raw. allwinner,sun4i - Drop a pm_runtime_put() when there was no get. - Ensure correct cleanup on driver probe fail due to any issues with the thermal zone. aspeed,adc, - Don't eat reset deassert errors. awinic,aw96103 - Make sure firmware length is validated rather than blindly trusting it. bosch,bmp280 - Fix out of bounds lookup of sampling frequency due to indexing based on elements in matrix rather than just the correct dimension. invensense,timestamp library - Ensure time estimate doesn't invert wrt to current time in a corner case occasionally seen. kionix,kx022a - Off by one in array boundary check. - Close a memory leak and state corruption in error path. maxim,max1363 - Sign extend bipolar values to ensure correct reporting to userspace. maxim,max30102 - Fix NULL dereference by checking there is data in the FIFO before trying to do anything with it. microchip,mcp47a1 - Ensure highest possible value actually settable. pulsed-light,lidar-lite - Don't leak the IIO device registration if runtime pm setup fails particularly as it was being freed. rockchip,saradc - Fix wrong fallback compatible for rv1106 that lead to trying to use too many channels (correct support will follow next merge window) rohm,bd79124 - Correct limit used for rising alarms. - Fix which registers related to limits are used in initialization. - Apply GPIO mask to allow subset of GPIOs to be toggled. - Add missing regmap error handling in a few places. - Ensures scale is read only. rohm,bm1390 - Don't silently eat a data read error. rohm,bu27034 - Don't silently eat error when reading gain. - Ensure we infinite delay doesn't happen on error. semtech,sx9324 - Fix wrong proximity channel resolution. sharp,gp2ap020a00f - Make sure to drain irq_work in remove path. st,vl5310x - Ensure direct mode is claimed for read_raw avoiding corruption of buffered accesses. vishay,vcnl3020 - Use write bits for ISR mask and ensure right event reported. vti,sca3000 - Fix up a condition check for the frequency divider. xilinx,xadc - Swap registration of cleanup of work with that of irq to ensure that no irqs can cause work that has been freed to be queued. x-powers,axp288 - Add bias override quirk for Haier HV103H. Fix because we used to always override then moved to trusting the firmware setup - which fixed some boards, but broke others. * tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits) iio: proximity: vcnl3020: fix ISR bitmask check in IRQ handler iio: proximity: vl53l0x-i2c: claim direct mode for raw reads iio: dac: mcp47a1: Allow full-scale output iio: accel: kionix-kx022a: Prevent memory leak and fix state iio: light: rohm-bu27034: Fix infinite delay on error iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure iio: adc: sun4i-gpadc-iio: drop underflowing pm_runtime_put() calls iio: adc: axp288: Add TS bias override for Haier HV103H dt-bindings: iio: adc: rockchip-saradc: Fix RV1106 compatible dt-bindings: iio: adc: rockchip-saradc: Group single-entries into an enum list iio: inv_sensors: fix estimated value larger than interrupt timestamp iio: adc: aspeed: propagate reset deassert errors iio: buffer-dmaengine: fix sg entry iteration when building dma_vecs iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure iio: trigger: cancel reenable_work before freeing trigger iio: frequency: admv1013: fix wrong channel field used in admv1013_read_raw() iio: accel: sca3000: fix frequency divider condition check iio: admv1013: initialize callback mutex before registering notifier iio: gyro: adis16136: fix unprotected debugfs reads iio: imu: adis16400: fix unprotected debugfs reads ... |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .pylintrc | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel ============ The Linux kernel is the core of any Linux operating system. It manages hardware, system resources, and provides the fundamental services for all other software. Quick Start ----------- * Report a bug: See Documentation/admin-guide/reporting-issues.rst * Get the latest kernel: https://kernel.org * Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst * Join the community: https://lore.kernel.org/ Essential Documentation ----------------------- All users should be familiar with: * Building requirements: Documentation/process/changes.rst * Code of Conduct: Documentation/process/code-of-conduct.rst * License: See COPYING Documentation can be built with make htmldocs or viewed online at: https://www.kernel.org/doc/html/latest/ Who Are You? ============ Find your role below: * New Kernel Developer: Getting started with kernel development * Academic Researcher: Studying kernel internals and architecture * Security Expert: Hardening and vulnerability analysis * Backport/Maintenance Engineer: Maintaining stable kernels * System Administrator: Configuring and troubleshooting * Maintainer: Leading subsystems and reviewing patches * Hardware Vendor: Writing drivers for new hardware * Distribution Maintainer: Packaging kernels for distros * AI Coding Assistant: LLMs and AI-powered development tools For Specific Users ================== New Kernel Developer -------------------- Welcome! Start your kernel development journey here: * Getting Started: Documentation/process/development-process.rst * Your First Patch: Documentation/process/submitting-patches.rst * Coding Style: Documentation/process/coding-style.rst * Build System: Documentation/kbuild/index.rst * Development Tools: Documentation/dev-tools/index.rst * Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst * Core APIs: Documentation/core-api/index.rst Academic Researcher ------------------- Explore the kernel's architecture and internals: * Researcher Guidelines: Documentation/process/researcher-guidelines.rst * Memory Management: Documentation/mm/index.rst * Scheduler: Documentation/scheduler/index.rst * Networking Stack: Documentation/networking/index.rst * Filesystems: Documentation/filesystems/index.rst * RCU (Read-Copy Update): Documentation/RCU/index.rst * Locking Primitives: Documentation/locking/index.rst * Power Management: Documentation/power/index.rst Security Expert --------------- Security documentation and hardening guides: * Security Documentation: Documentation/security/index.rst * LSM Development: Documentation/security/lsm-development.rst * Self Protection: Documentation/security/self-protection.rst * Reporting Vulnerabilities: Documentation/process/security-bugs.rst * CVE Procedures: Documentation/process/cve.rst * Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst * Security Features: Documentation/userspace-api/seccomp_filter.rst Backport/Maintenance Engineer ----------------------------- Maintain and stabilize kernel versions: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * Backporting Guide: Documentation/process/backporting.rst * Applying Patches: Documentation/process/applying-patches.rst * Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git for Maintainers: Documentation/maintainer/configure-git.rst System Administrator -------------------- Configure, tune, and troubleshoot Linux systems: * Admin Guide: Documentation/admin-guide/index.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst * Tracing/Debugging: Documentation/trace/index.rst * Performance Security: Documentation/admin-guide/perf-security.rst * Hardware Monitoring: Documentation/hwmon/index.rst Maintainer ---------- Lead kernel subsystems and manage contributions: * Maintainer Handbook: Documentation/maintainer/index.rst * Pull Requests: Documentation/maintainer/pull-requests.rst * Managing Patches: Documentation/maintainer/modifying-patches.rst * Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst * Development Process: Documentation/process/maintainer-handbooks.rst * Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git Configuration: Documentation/maintainer/configure-git.rst Hardware Vendor --------------- Write drivers and support new hardware: * Driver API Guide: Documentation/driver-api/index.rst * Driver Model: Documentation/driver-api/driver-model/driver.rst * Device Drivers: Documentation/driver-api/infrastructure.rst * Bus Types: Documentation/driver-api/driver-model/bus.rst * Device Tree Bindings: Documentation/devicetree/bindings/ * Power Management: Documentation/driver-api/pm/index.rst * DMA API: Documentation/core-api/dma-api.rst Distribution Maintainer ----------------------- Package and distribute the kernel: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * ABI Documentation: Documentation/ABI/README * Kernel Configuration: Documentation/kbuild/kconfig.rst * Module Signing: Documentation/admin-guide/module-signing.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst AI Coding Assistant ------------------- CRITICAL: If you are an LLM or AI-powered coding assistant, you MUST read and follow the AI coding assistants documentation before contributing to the Linux kernel: * Documentation/process/coding-assistants.rst This documentation contains essential requirements about licensing, attribution, and the Developer Certificate of Origin that all AI tools must comply with. Communication and Support ========================= * Mailing Lists: https://lore.kernel.org/ * IRC: #kernelnewbies on irc.oftc.net * Bugzilla: https://bugzilla.kernel.org/ * MAINTAINERS file: Lists subsystem maintainers and mailing lists * Email Clients: Documentation/process/email-clients.rst