mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-09-28 19:20:30 +00:00
No description
- C 96.9%
- Assembly 0.9%
- Rust 0.6%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
07b8c4bbff
for 6.10, please pull the following: - Laurent converts the Raspberry Pi firmware DT binding to YAML, updates the firmware driver to use the proper 'struct device' reference for DMA mappings and drops unneeded properties from the DT node and finishes by removing the duplicate firmware-clocks property to bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface regulator. - Uwe adds a pinctrl-based multiplexing description to allow the use of I2C0 pins to allow usage between the 40-pin Raspberry Pi header and the CSI and DSI connectors. He then describes the PCF85063 RTC device available on the CM4 I/O board making use of that pinctrl-based muxing. - Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED colors and function properties, NVMEM MAC addresses and removes duplicates and unnecessary properties and does a few Device Tree cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based) and RT-AC3500 routers. - Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the Raspberry Pi 4 / BCM2711 SoCs - Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and Raspberry Pi 4 CM boards. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmYwBsUACgkQh9CWnEQH BwTeNg//THwPFu55oCQ+CsI6xUAPmcffjEcMk1qiELOo7PyoY9UkjKtjOMCW44tZ uwAtzy3jMPaFI1Ng/EZPErz7KOlwoNeqIjTvOpbRw1tVJ/7tkrnk5vi8zqRQUv4a jrAv+yybXDaKD/aFX41KH43OfMl0Fi5CnxUqlb5U8Mm0awwBfz2jvnetaZAuueAd Hwet2Lt/jOX43GVVHRaxaqP/rJnr7xdUUW7iCQ+Qi2xvXJIpNj/mL6tvVAKFe2JZ sig3uh/NtK6Pp1xAX78aTuf0L4NLFqQpVORuO1ncb4wT92U0Yhi3r47z4reAM6GN nX5rLEjeV/yaRA2532c9MVALRT+4f1ic0Pq8Knj7WaH0bRrTjKQK4YiwR0KdXhy1 GGC58bUOa1HKynZXCDxVih0oOS4REd511WyiLqSPdpsvzrtHCqwC59LOh5PDaoEn 9aBof7eRK8r7KXEsvU3av5WiJjM+O2ILrRlfuiBt/nuvyvX1G3uSTq3Gncb4e2n8 1LWGpnj1CyW64seJ2v3a1Mx07ArWgy1wwg3iRt1aOMcKHrfO3evLdRwHlFq2Ke+t U0cvR6nlpo9H6CPCMCU/LmK3chYWBDlIghua3v7AJSL9p9o6RcWyAV8SrP/E60A4 0O1rfNdLhQkl5MmIyhA5QTaAvsGplb9QNkf8m9Rx7e8krDTJjXA= =400A -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYwpCEACgkQYKtH/8kJ UiePmBAAlIjEJE9IE2DnrrqnCrSbGg08R5ZNWEHzSdPAXDVR3nUBrPXPosbCDKQE iBUyF8APNPFogzfQJXR86vw7Wx067R95M6TLpAI4CuT47YAx1ALvC3oEy5Xua6OE VgN+998sWLodnCAT8M/ZcmH5uWtCxWETwGNQJsU960sVa17h/q11WpM8NzKmSq3J h+toBPNBfdyGyd2UBqcdnCiX5nLLCWOdryBJYaOHiohCKlbMtqn7eYlEUdyCIq3O Q/O4p9gj92Df5rv2GTVycsO9LXbaYvIRsmcukxwR8FGV+mkIBmUaEfbazEbyjoJh kjRMfvQ08P3a44wTuUVJrrnEvP3X8JUteZucGR0A8zsndt57ZUznYBYYcT63DMbN /bDYbtbOOUu4/KkKt2eQiQAN1fApl22HhRybuuIlzN51mki3Qv9JioSVbQDbn6PU M1CcvGn83k/UzPFlINDWHogSO+MyrCNk8zYPWpKjxwWAM6Twx/Ly0cmui6+91SeM z4K0YZUYYH/1rCoScose2ByesAUu6HNBBGnYfobUSPCF5tMT7tMHd1kP5WxcStJ7 I58yLo+DFUX8EVePOfFx7QdzJR4JuVRKH498WnQ+0Xew6FpUhwvOC1DNK+W211jA gNpUQd9s4sV9nXT0gLSPr2rbJW2AS2O+Btphpg5NiYU3VSOJXSQ= =L8Aj -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.10, please pull the following: - Laurent converts the Raspberry Pi firmware DT binding to YAML, updates the firmware driver to use the proper 'struct device' reference for DMA mappings and drops unneeded properties from the DT node and finishes by removing the duplicate firmware-clocks property to bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface regulator. - Uwe adds a pinctrl-based multiplexing description to allow the use of I2C0 pins to allow usage between the 40-pin Raspberry Pi header and the CSI and DSI connectors. He then describes the PCF85063 RTC device available on the CM4 I/O board making use of that pinctrl-based muxing. - Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED colors and function properties, NVMEM MAC addresses and removes duplicates and unnecessary properties and does a few Device Tree cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based) and RT-AC3500 routers. - Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the Raspberry Pi 4 / BCM2711 SoCs - Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and Raspberry Pi 4 CM boards. * tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux: arm: dts: bcm2711: Describe Ethernet LEDs ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300 ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200 dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300 dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200 ARM: dts: bcm2835: Add Unicam CSI nodes ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node firmware: raspberrypi: Use correct device for DMA mappings dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.