mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-31 05:15:34 +00:00
cb9b4c3403
across all blinking LEDs and falls back to software blink if different
frequencies are requested.
* trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
* led-core: Fix a race condition where a quick LED_OFF followed by another
brightness set could leave the LED off incorrectly, especially
noticeable after the introduction of the ordered workqueue.
* qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
* qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
* qcom-lpg: Fix PWM value capping to respect the selected resolution for
Hi-Res PWMs.
* qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to prevent
requested duty cycles from exceeding the maximum allowed by the
selected resolution.
* st1202: Add a check for the error code returned by devm_mutex_init().
* pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
* st1202: Ensure hardware initialization (st1202_setup) happens before DT
node processing (st1202_dt_init).
* Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's required
by the driver.
* lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
* pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
* pca955x: Pass driver data pointers instead of the I2C client to helper
functions.
* pca955x: Optimize probe LED selection logic to reduce I2C operations.
* pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
* st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
* st1202: Minor spacing and proofreading edits in comments.
* Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
* mlxcpld: Remove unused include of acpi.h.
* nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
* tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
* qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- pca955x: Add HW blink support, utilizing PWM0. It supports one
frequency across all blinking LEDs and falls back to software blink
if different frequencies are requested.
- trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
- led-core: Fix a race condition where a quick LED_OFF followed by
another brightness set could leave the LED off incorrectly,
especially noticeable after the introduction of the ordered
workqueue.
- qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
for Hi-Res PWMs.
- qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to
prevent requested duty cycles from exceeding the maximum allowed by
the selected resolution.
- st1202: Add a check for the error code returned by devm_mutex_init().
- pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
- st1202: Ensure hardware initialization (st1202_setup) happens before
DT node processing (st1202_dt_init).
- Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's
required by the driver.
- lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
- pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
- pca955x: Pass driver data pointers instead of the I2C client to
helper functions.
- pca955x: Optimize probe LED selection logic to reduce I2C operations.
- pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
- st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
- st1202: Minor spacing and proofreading edits in comments.
- Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
- mlxcpld: Remove unused include of acpi.h.
- nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
- tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
- qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
* tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits)
leds: nic78bx: Tidy up ACPI ID table
leds: mlxcpld: Remove unused ACPI header inclusion
leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs
leds: Rename simple directory to simatic
leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN
leds: leds-st1202: Spacing and proofreading editing
leds: leds-st1202: Initialize hardware before DT node child operations
leds: pwm-multicolor: Add check for fwnode_property_read_u32
leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution
leds: Fix LED_OFF brightness race
Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()"
leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion
dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible
leds: pca955x: Add HW blink support
leds: pca955x: Optimize probe LED selection
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Refactor with helper functions and renaming
dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format
...
|
History
|
|
|---|---|---|
| .. | ||
| blink | ||
| flash | ||
| rgb | ||
| simatic | ||
| trigger | ||
| Kconfig | ||
| led-class-flash.c | ||
| led-class-multicolor.c | ||
| led-class.c | ||
| led-core.c | ||
| led-triggers.c | ||
| leds-88pm860x.c | ||
| leds-acer-a500.c | ||
| leds-adp5520.c | ||
| leds-an30259a.c | ||
| leds-apu.c | ||
| leds-ariel.c | ||
| leds-aw200xx.c | ||
| leds-aw2013.c | ||
| leds-bcm6328.c | ||
| leds-bcm6358.c | ||
| leds-bd2606mvv.c | ||
| leds-bd2802.c | ||
| leds-blinkm.c | ||
| leds-cht-wcove.c | ||
| leds-clevo-mail.c | ||
| leds-cobalt-qube.c | ||
| leds-cobalt-raq.c | ||
| leds-cpcap.c | ||
| leds-cr0014114.c | ||
| leds-cros_ec.c | ||
| leds-da903x.c | ||
| leds-da9052.c | ||
| leds-dac124s085.c | ||
| leds-el15203000.c | ||
| leds-expresswire.c | ||
| leds-gpio-register.c | ||
| leds-gpio.c | ||
| leds-hp6xx.c | ||
| leds-ip30.c | ||
| leds-ipaq-micro.c | ||
| leds-is31fl32xx.c | ||
| leds-is31fl319x.c | ||
| leds-lm355x.c | ||
| leds-lm3530.c | ||
| leds-lm3532.c | ||
| leds-lm3533.c | ||
| leds-lm3642.c | ||
| leds-lm3692x.c | ||
| leds-lm3697.c | ||
| leds-lm36274.c | ||
| leds-locomo.c | ||
| leds-lp50xx.c | ||
| leds-lp55xx-common.c | ||
| leds-lp55xx-common.h | ||
| leds-lp3944.c | ||
| leds-lp3952.c | ||
| leds-lp5521.c | ||
| leds-lp5523.c | ||
| leds-lp5562.c | ||
| leds-lp5569.c | ||
| leds-lp8501.c | ||
| leds-lp8788.c | ||
| leds-lp8860.c | ||
| leds-lp8864.c | ||
| leds-lt3593.c | ||
| leds-max5970.c | ||
| leds-max8997.c | ||
| leds-max77650.c | ||
| leds-max77705.c | ||
| leds-mc13783.c | ||
| leds-menf21bmc.c | ||
| leds-mlxcpld.c | ||
| leds-mlxreg.c | ||
| leds-mt6323.c | ||
| leds-net48xx.c | ||
| leds-netxbig.c | ||
| leds-nic78bx.c | ||
| leds-ns2.c | ||
| leds-ot200.c | ||
| leds-pca955x.c | ||
| leds-pca963x.c | ||
| leds-pca995x.c | ||
| leds-pca9532.c | ||
| leds-pm8058.c | ||
| leds-powernv.c | ||
| leds-pwm.c | ||
| leds-qnap-mcu.c | ||
| leds-rb532.c | ||
| leds-regulator.c | ||
| leds-sc27xx-bltc.c | ||
| leds-spi-byte.c | ||
| leds-ss4200.c | ||
| leds-st1202.c | ||
| leds-sun50i-a100.c | ||
| leds-sunfire.c | ||
| leds-syscon.c | ||
| leds-tca6507.c | ||
| leds-ti-lmu-common.c | ||
| leds-tlc591xx.c | ||
| leds-tps6105x.c | ||
| leds-turris-omnia.c | ||
| leds-upboard.c | ||
| leds-wm831x-status.c | ||
| leds-wm8350.c | ||
| leds-wrap.c | ||
| leds.h | ||
| Makefile | ||
| TODO | ||
| uleds.c | ||