mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-09 18:15:49 +00:00
No description
- C 96.9%
- Assembly 0.9%
- Rust 0.6%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
1d3454fafb
Support for Sony Xperia 1V, on the SM8550 platform, is added. On IPQ8074, UART6 is described and unused gpios from QPIC are removed. Backlight and touchscreen are described on Samsung Grand Prime devices. RGB LED is added to Sony Xperia "Yoshino" devices, on which the volume-up key definition is corrected as well. Light Pulse Generator node is added to PM6150L PMIC, and blocks related to USB Type-C on PM6150 are added. On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of remoteprocs and both USB Type-C and native DisplayPort are enabled. For the related IDP display is enabled, and the PMIC volume and power buttons are described. The inline crypto engine is added for SC7280, and an additional turbo frequency is added to the MDP. USB Type-C port management is introduce for the QRB2210 RB1. WiFi firmware-name qualifier is added to both RB1 and RB2 boards. The LMH node is added for the QCM2290, to configure the thresholds as well as provide thermal pressure input. The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow UHS modes. The unused DCC is disabled on SC7180, and unused PMIC gpio block is disabled on Trogdor. For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with agreed upon firmware structure. The frequency of the I2C bus for touchpad is brought up to mitigate missing events. A number of additional cleanups are introduced. For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad introduced. A PS_HOLD-based restart node is introduced and acts as a fallback if other mechanisms are unavailable to restart the board. QFPROM is described, missing LMH interrupts for thermal pressure are added. The TCSR download mode register is added, to allow configuring if download mode should be entered on a crash. USB Type-C handling is introduce for Fairphone FP3 as well. On SM6350 crypto engine and DisplayPort controllers are introduced. WiFi is enabled on the SM8150 Hardware Development Kit (HDK) USB PD properties are added on Xiaomi Mi Pad 5 Pro devices. Interconnect paths are added for UFS on SM8350, to ensure the bus is voted for when the controller is operating. On SM8550 the DMA coherency properties are corrected for SMMU and a few consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are adjusted. Fastrpc banks are marked non-secure as needed. The GPU description is introduced on SM8650, and enabled on the QRD. A missing reserved-memory node is added, as is a few missing fastrpc compute banks, and the non-secure-domain flag for other banks. On X1 Elite SPMI support is added, together with PMIC definitons. The link properties for DP3 are corrected, and audio-related resets are introduced. SoundWire properties are corrected. Nodes describing the PCIe bridge under the host controller is added for a bunch of platforms. The GPIO carrying orientation information for USB Type-C is added across Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845 HDKs. A few dtbTool-specific compatibles for msm8916 is dropped from the bindings. A number of DeviceTree binding validation issues are corrected. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmYtPN8VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FUUgQALpnVSHS39IDVFOoUb6fEccSu1dI SDMm7kMzr6ZJjE1v8LiFsr/qz+DyXR6I4oQf7LEz6C+BbgDA2+ERnlecVmv/Fwpz i4eO2mpO29hxzr6tu+cLIjK5BJhlAeol/rGfL+PfHRBwfrxSzN3ZQmjAVMgJb7E0 Lb0FTPQ3NDHEiWeQbSN8h+lHc6FcnHG4xf+IJD5a3U/x7fhPJRLU7Wb2yRDSQkLU Qb0Jg1Spsjs13dp3ICE0jcK+WYlzn9KqD2dP0/3cUOwLWb7ic6BV9gEbSPn2ALfK ZWqEyv2jbxfGd//0YN1gesssNaKeZCOE1xXJxu5R3h7qquyeTXlcCj1gyePCMTuz HSqi7WmJufruu8uZEhRj0I7+bT3EWUF1h1vt+d8fubSE2JANKDi4IDQPb2qs5DvA 4aCuuD59F49pkRMkmTOcDzRnYv70IdyHhdSQ0+O233TXnJdE+5hq8s/5jHX4iviD e290Zrvm1sid+oiISh/edrN3DH+tea3TsNtWcrDB7v5MKX7pOOwuGnDSAhAmsWg6 B4Hy+cMVFpZaeOpSgj77MaU+Ri9DDhS5PzRVaCEp0ya+uR/oOOHgSy/SFS0U+Ho/ gmTPMDchIokHxLB+ySU1Sufb9KryZvv4/MokbKwDgag4xjgu/F5gWkHIS0tRSGtW x+FT1ZUKPTeOg0J9 =j685 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYvsikACgkQYKtH/8kJ UidI3A/9G4E77uhMmK+QjmElfWTkS85xmO8l62VzRFvSaqhvCpvtG43BIaqpFGHw T5BwTY7EHY0rezxeSQb7b02R7N1wGl4Jc7wzVyAkL/LH9aOX603qkYFQQP/eHtx4 FKz1mifB0W59t0TbSmLtA+ToNXAhtaf6X8jn1lSQCSb0gmW9EiMMeOacRCohLIY4 yUmvVGd/+oTfVG7Dus7ck/Cq6Nte8MR6wYj8gGObgfjKbB1Q9+p3dXmn/1y+mg7e CWYCt43ebt5Do1VJaVRZ0wbu/B+WQzWpB8mNjKLBMSlU6INdgy35fgED4SNvaNwH Bi+ySu0ZonoOVzowNQ52sEla1jz8UulXz5fWx3tSqvyTqVXVGbQCeG6ZM/W4oNTj cmBFPMzs51yAb/mi8uVVtEBHYg1gyYrqW6JStiswjsoZXxeDFy45CW+GYIljW0zz 04S3ME9aK0DpAGZFS6U+f9BAhF9l/3JSmtA60ej1LxjapcsoHZSkhwjn9pIdcaCr K6LTdRn0Pz55mqgyvnOOltiQrRU/0KMfsRibMfNBG9JUqHuSolrJmIDbRe28yYl7 QCMMFhPI/OAwoFzvzXDx6Q2bcWBQ7ZyW0bG2Cd7Q8u/Bnhsv6wuJjYBczLYSNQJG Xg0oVdEx6Opqcmk7gnNfCJ0MGZAEaZesIX/oUC30c2NSJoo4fpE= =f9Mf -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.10 Support for Sony Xperia 1V, on the SM8550 platform, is added. On IPQ8074, UART6 is described and unused gpios from QPIC are removed. Backlight and touchscreen are described on Samsung Grand Prime devices. RGB LED is added to Sony Xperia "Yoshino" devices, on which the volume-up key definition is corrected as well. Light Pulse Generator node is added to PM6150L PMIC, and blocks related to USB Type-C on PM6150 are added. On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of remoteprocs and both USB Type-C and native DisplayPort are enabled. For the related IDP display is enabled, and the PMIC volume and power buttons are described. The inline crypto engine is added for SC7280, and an additional turbo frequency is added to the MDP. USB Type-C port management is introduce for the QRB2210 RB1. WiFi firmware-name qualifier is added to both RB1 and RB2 boards. The LMH node is added for the QCM2290, to configure the thresholds as well as provide thermal pressure input. The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow UHS modes. The unused DCC is disabled on SC7180, and unused PMIC gpio block is disabled on Trogdor. For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with agreed upon firmware structure. The frequency of the I2C bus for touchpad is brought up to mitigate missing events. A number of additional cleanups are introduced. For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad introduced. A PS_HOLD-based restart node is introduced and acts as a fallback if other mechanisms are unavailable to restart the board. QFPROM is described, missing LMH interrupts for thermal pressure are added. The TCSR download mode register is added, to allow configuring if download mode should be entered on a crash. USB Type-C handling is introduce for Fairphone FP3 as well. On SM6350 crypto engine and DisplayPort controllers are introduced. WiFi is enabled on the SM8150 Hardware Development Kit (HDK) USB PD properties are added on Xiaomi Mi Pad 5 Pro devices. Interconnect paths are added for UFS on SM8350, to ensure the bus is voted for when the controller is operating. On SM8550 the DMA coherency properties are corrected for SMMU and a few consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are adjusted. Fastrpc banks are marked non-secure as needed. The GPU description is introduced on SM8650, and enabled on the QRD. A missing reserved-memory node is added, as is a few missing fastrpc compute banks, and the non-secure-domain flag for other banks. On X1 Elite SPMI support is added, together with PMIC definitons. The link properties for DP3 are corrected, and audio-related resets are introduced. SoundWire properties are corrected. Nodes describing the PCIe bridge under the host controller is added for a bunch of platforms. The GPIO carrying orientation information for USB Type-C is added across Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845 HDKs. A few dtbTool-specific compatibles for msm8916 is dropped from the bindings. A number of DeviceTree binding validation issues are corrected. * tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits) dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn) arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node arm64: dts: qcom: ipq6018: Add PCIe bridge node arm64: dts: qcom: ipq8074: Add PCIe bridge node arm64: dts: qcom: msm8996: Add PCIe bridge node arm64: dts: qcom: sc8180x: Add PCIe bridge node arm64: dts: qcom: qcs404: Add PCIe bridge node arm64: dts: qcom: sc7280: Add PCIe bridge node arm64: dts: qcom: msm8998: Add PCIe bridge node arm64: dts: qcom: sc8280xp: Add PCIe bridge node arm64: dts: qcom: sa8775p: Add PCIe bridge node arm64: dts: qcom: sm8650: Add PCIe bridge node arm64: dts: qcom: sm8550: Add PCIe bridge node arm64: dts: qcom: sm8450: Add PCIe bridge node arm64: dts: qcom: sm8350: Add PCIe bridge node arm64: dts: qcom: sm8150: Add PCIe bridge node arm64: dts: qcom: sdm845: Add PCIe bridge node arm64: dts: qcom: sm8250: Add PCIe bridge node arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on ... Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.