mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-08 18:57:22 +00:00
2e04247f7c
- Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC 2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4= =snbx -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. * tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) ftrace: Implement :mod: cache filtering on kernel command line tracing: Adopt __free() and guard() for trace_fprobe.c bpf: Use ftrace_get_symaddr() for kprobe_multi probes ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr Documentation: probes: Update fprobe on function-graph tracer selftests/ftrace: Add a test case for repeating register/unregister fprobe selftests: ftrace: Remove obsolate maxactive syntax check tracing/fprobe: Remove nr_maxactive from fprobe fprobe: Add fprobe_header encoding feature fprobe: Rewrite fprobe on function-graph tracer s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS tracing: Add ftrace_fill_perf_regs() for perf event tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs fprobe: Use ftrace_regs in fprobe exit handler fprobe: Use ftrace_regs in fprobe entry handler fgraph: Pass ftrace_regs to retfunc fgraph: Replace fgraph_ret_regs with ftrace_regs ... |
History
|
|
|---|---|---|
| .. | ||
| acrn | ||
| auxdisplay | ||
| binderfs | ||
| bpf | ||
| cgroup | ||
| configfs | ||
| connector | ||
| coresight | ||
| fanotify | ||
| fprobe | ||
| ftrace | ||
| hid | ||
| hidraw | ||
| hw_breakpoint | ||
| kdb | ||
| kfifo | ||
| kmemleak | ||
| kobject | ||
| kprobes | ||
| landlock | ||
| livepatch | ||
| mei | ||
| nitro_enclaves | ||
| pfsm | ||
| pidfd | ||
| pktgen | ||
| qmi | ||
| rpmsg | ||
| rust | ||
| seccomp | ||
| timers | ||
| trace_events | ||
| trace_printk | ||
| uhid | ||
| user_events | ||
| v4l | ||
| vfio-mdev | ||
| vfs | ||
| watch_queue | ||
| watchdog | ||
| Kconfig | ||
| Makefile | ||