mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-24 19:10:26 +00:00
No description
- C 96.8%
- Assembly 0.9%
- Rust 0.7%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
6ddc9132bc
Modify i2c frequency from table parameters for NPCM i2c modules. Supported frequencies are: 1. 100KHz 2. 400KHz 3. 1MHz The original equations were tested on a variety of chips and base clocks. Since we added devices that use higher frequencies of the module we saw that there is a mismatch between the equation and the actual results on the bus itself, measured on scope. Meanwhile, the equations were not accurate to begin with. They are an approximation of the ideal value. The ideal value is calculated per frequency of the core module. So instead of using the equations we did an optimization per module frequency, verified on a device. Most of the work was focused on the rise time of the SCL and SDA, which depends on external load of the bus and PU. Different PCB designs, or specifically to this case: the number and type of targets on the bus, impact the required values for the timing registers. Users can recalculate the numbers for each bus and get an even better optimization, but our users chose not to. We manually picked values per frequency that match the entire valid range of targets (from 1 to max number). Then we check against the AMR described in SMB spec and make sure that none of the values is exceeding. This process was led by the chip architect and included a lot of testing. Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Tali Perry <tali.perry1@gmail.com> Link: https://lore.kernel.org/r/20241219090859.18722-4-kfting@nuvoton.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.