mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
No description
- C 96.8%
- Assembly 0.9%
- Rust 0.7%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
78f2d64e48
On the Renesas RZ/G3S SoC, the USB PHY block has an input signal called
PWRRDY. This signal is managed by the system controller and must be
de-asserted after powering on the area where USB PHY resides and asserted
before powering it off.
On power-on/resume the USB PWRRDY signal need to be de-asserted before
enabling clock and switching the module to normal state (through MSTOP
support). The power-on/resume configuration sequence must be:
1/ PWRRDY=0
2/ CLK_ON=1
3/ MSTOP=0
On power-off/suspend the configuration sequence should be:
1/ MSTOP=1
2/ CLK_ON=0
3/ PWRRDY=1
The CLK_ON and MSTOP functionalities are controlled by clock drivers.
The suspend/resume support will be handled by different patches.
After long discussions with the internal HW team, it has been confirmed
that the HW connection b/w USB PHY block, the USB channels, the system
controller, clock, MSTOP, PWRRDY signal is as follows:
┌──────────────────────────────┐
│ │◄── CPG_CLKON_USB.CLK0_ON
│ USB CH0 │
┌──────────────────────────┐ │┌───────────────────────────┐ │◄── CPG_CLKON_USB.CLK2_ON
│ ┌────────┐ ││host controller registers │ │
│ │ │ ││function controller registers│
│ │ PHY0 │◄──┤└───────────────────────────┘ │
│ USB PHY │ │ └────────────▲─────────────────┘
│ └────────┘ │
│ │ CPG_BUS_PERI_COM_MSTOP.MSTOP{6, 5}_ON
│┌──────────────┐ ┌────────┐
││USHPHY control│ │ │
││ registers │ │ PHY1 │ ┌──────────────────────────────┐
│└──────────────┘ │ │◄──┤ USB CH1 │
│ └────────┘ │┌───────────────────────────┐ │◄── CPG_CLKON_USB.CLK1_ON
└─▲───────▲─────────▲──────┘ ││ host controller registers │ │
│ │ │ │└───────────────────────────┘ │
│ │ │ └────────────▲─────────────────┘
│ │ │ │
│ │ │ CPG_BUS_PERI_COM_MSTOP.MSTOP7_ON
│PWRRDY │ │
│ │ CPG_CLK_ON_USB.CLK3_ON
│ │
│ CPG_BUS_PERI_COM_MSTOP.MSTOP4_ON
│
┌────┐
│SYSC│
└────┘
where:
- CPG_CLKON_USB.CLK.CLKX_ON is the register bit controlling the clock X
of different USB blocks, X in {0, 1, 2, 3}
- CPG_BUS_PERI_COM_MSTOP.MSTOPX_ON is the register bit controlling the
MSTOP of different USB blocks, X in {4, 5, 6, 7}
- USB PHY is the USB PHY block exposing 2 ports, port0 and port1, used
by the USB CH0, USB CH1
- SYSC is the system controller block controlling the PWRRDY signal
- USB CHx are individual USB block with host and function capabilities
(USB CH0 have both host and function capabilities, USB CH1 has only
host capabilities)
The USBPHY control registers are controlled though the
reset-rzg2l-usbphy-ctrl driver. The USB PHY ports are controlled by
phy_rcar_gen3_usb2 (drivers/phy/renesas/phy-rcar-gen3-usb2.c file). The
USB PHY ports request resets from the reset-rzg2l-usbphy-ctrl driver.
The connection b/w the system controller and the USB PHY CTRL driver is
implemented through the renesas,sysc-pwrrdy device tree property
proposed in this patch. This property specifies the register offset and the
bitmask required to control the PWRRDY signal.
Since the USB PHY CTRL driver needs to be probed before any other
USB-specific driver on RZ/G3S, control of PWRRDY is passed exclusively
to it. This guarantees the correct configuration sequence between clocks,
MSTOP bits, and the PWRRDY bit on probe/resume and remove/suspend. At the
same time, changes are kept minimal by avoiding modifications to the USB
PHY driver to also handle the PWRRDY itself.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .clippy.toml | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .pylintrc | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.