linux/drivers/i2c
Andreas Kemnade b202afc54e i2c: omap: fix IRQ storms
commit 285df995f9 upstream.

On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.

Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes

[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.

Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.

To still avoid the i2cdetect trouble which is the reason for
commit c770657bd2 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.

By changing this, the hardirq handler is not needed anymore to filter
stuff.

The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.

Fixes: c770657bd2 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
History 2025-03-28 21:59:54 +01:00
..
algos i2c: algo: bit: allow getsda to be NULL 2023-01-23 23:15:49 +01:00
busses i2c: omap: fix IRQ storms 2025-03-28 21:59:54 +01:00
muxes i2c: mux: demux-pinctrl: check initial mux selection, too 2025-01-23 17:21:12 +01:00
i2c-atr.c i2c: atr: Fix client detach 2025-01-23 17:21:15 +01:00
i2c-boardinfo.c i2c: Remove support for dangling device properties 2021-04-10 21:43:02 +02:00
i2c-core-acpi.c i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz 2025-02-17 09:40:08 +01:00
i2c-core-base.c i2c: core: Lock address during client device instantiation 2024-10-10 11:58:01 +02:00
i2c-core-of.c Char/Misc drivers for 6.4-rc1 2023-04-27 12:07:50 -07:00
i2c-core-slave.c i2c: add tracepoints for I2C slave events 2022-03-20 00:11:05 +01:00
i2c-core-smbus.c i2c: smbus: Check for parent device before dereference 2022-02-19 12:37:20 +01:00
i2c-core.h i2c: core: Fix atomic xfer check for non-preempt config 2024-01-10 17:17:00 +01:00
i2c-dev.c i2c: dev: copy userspace array safely 2023-11-28 17:19:47 +00:00
i2c-mux.c i2c: mux: Avoid potential false error message in i2c_mux_add_adapter 2023-09-25 08:22:02 +02:00
i2c-slave-eeprom.c i2c: Convert drivers to new .probe() callback 2023-03-09 21:59:30 +01:00
i2c-slave-testunit.c i2c: testunit: avoid re-issued work after read message 2024-07-18 13:21:26 +02:00
i2c-smbus.c i2c: smbus: Send alert notifications to all devices if source not found 2024-08-14 13:58:51 +02:00
i2c-stub.c i2c: stub: remove definition of DEBUG 2021-01-17 13:00:10 +01:00
Kconfig i2c: Make I2C_ATR invisible 2023-09-13 10:56:00 +02:00
Makefile media: i2c: add I2C Address Translator (ATR) support 2023-07-14 13:11:44 +02:00