No description
  • C 96.8%
  • Assembly 0.9%
  • Rust 0.7%
  • Shell 0.6%
  • Python 0.5%
  • Other 0.3%
Find a file
Mark Brown 9dee1f9fc5
Merge series "RTL8231 GPIO expander support" from Sander Vanheule <sander@svanheule.net>:
The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
bus device. Currently only the MDIO mode is supported, although SMI mode
support should be fairly straightforward, once an SMI bus driver is available.

Provided features by the RTL8231:
  - Up to 37 GPIOs
    - Configurable drive strength: 8mA or 4mA (currently unsupported)
    - Input debouncing on high GPIOs (currently unsupported)
  - Up to 88 LEDs in multiple scan matrix groups
    - On, off, or one of six toggling intervals
    - "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
    - "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
  - Up to one PWM output (currently unsupported)
    - Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)

Register access is provided through a new MDIO regmap provider. The GPIO
controller uses gpio-regmap, although a patch is required to support a
limitation of the chip.

There remain some log warnings when probing the device, possibly due to the way
I'm using the MFD subsystem. Would it be possible to avoid these?
[    2.602242] rtl8231-pinctrl: Failed to locate of_node [id: -2]
[    2.609380] rtl8231-pinctrl rtl8231-pinctrl.0.auto: no of_node; not parsing pinctrl DT

When no 'leds' sub-node is specified:
[    2.922262] rtl8231-leds: Failed to locate of_node [id: -2]
[    2.967149] rtl8231-leds rtl8231-leds.1.auto: no of_node; not parsing pinctrl DT
[    2.975673] rtl8231-leds rtl8231-leds.1.auto: scan mode missing or invalid
[    2.983531] rtl8231-leds: probe of rtl8231-leds.1.auto failed with error -22

Changes since v1:
  - Reintroduce MDIO regmap, with fixed Kconfig dependencies
  - Add configurable dir/value order for gpio-regmap direction_out call
  - Drop allocations for regmap fields that are used only on init
  - Move some definitions to MFD header
  - Add PM ops to replace driver remove for MFD
  - Change pinctrl driver to (modified) gpio-regmap
  - Change leds driver to use fwnode
Link: https://lore.kernel.org/lkml/cover.1620735871.git.sander@svanheule.net/

Changes since RFC:
  - Dropped MDIO regmap interface. I was unable to resolve the Kconfig
    dependency issue, so have reverted to using regmap_config.reg_read/write.
  - Added pinctrl support
  - Added LED support
  - Changed root device to MFD, with pinctrl and leds child devices. Root
    device is now an mdio_device driver.
Link: https://lore.kernel.org/linux-gpio/cover.1617914861.git.sander@svanheule.net/

Sander Vanheule (7):
  regmap: Add MDIO bus support
  gpio: regmap: Add configurable dir/value order
  dt-bindings: leds: Binding for RTL8231 scan matrix
  dt-bindings: mfd: Binding for RTL8231
  mfd: Add RTL8231 core device
  pinctrl: Add RTL8231 pin control and GPIO support
  leds: Add support for RTL8231 LED scan matrix

 .../bindings/leds/realtek,rtl8231-leds.yaml   | 159 ++++++++
 .../bindings/mfd/realtek,rtl8231.yaml         | 202 ++++++++++
 drivers/base/regmap/Kconfig                   |   6 +-
 drivers/base/regmap/Makefile                  |   1 +
 drivers/base/regmap/regmap-mdio.c             |  57 +++
 drivers/gpio/gpio-regmap.c                    |  20 +-
 drivers/leds/Kconfig                          |  10 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-rtl8231.c                   | 293 ++++++++++++++
 drivers/mfd/Kconfig                           |   9 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rtl8231.c                         | 153 +++++++
 drivers/pinctrl/Kconfig                       |  11 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-rtl8231.c             | 377 ++++++++++++++++++
 include/linux/gpio/regmap.h                   |   3 +
 include/linux/mfd/rtl8231.h                   |  57 +++
 include/linux/regmap.h                        |  36 ++
 18 files changed, 1393 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
 create mode 100644 drivers/base/regmap/regmap-mdio.c
 create mode 100644 drivers/leds/leds-rtl8231.c
 create mode 100644 drivers/mfd/rtl8231.c
 create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c
 create mode 100644 include/linux/mfd/rtl8231.h

base-commit: 6efb943b86

--
2.31.1
History 2021-05-19 17:00:40 +01:00
arch Handle power-gating of AMD IOMMU perf counters properly when they are used. 2021-05-09 13:00:26 -07:00
block block-5.13-2021-05-09 2021-05-09 13:25:14 -07:00
certs Kbuild updates for v5.13 (2nd) 2021-05-08 10:00:11 -07:00
crypto for-5.13/drivers-2021-04-27 2021-04-28 14:39:37 -07:00
Documentation A set of scheduler updates: 2021-05-09 13:14:34 -07:00
drivers Merge series "RTL8231 GPIO expander support" from Sander Vanheule <sander@svanheule.net>: 2021-05-19 17:00:40 +01:00
fs 3 small SMB3 chmultichannel related changesets (also for stable) 2021-05-09 13:19:29 -07:00
include Merge series "RTL8231 GPIO expander support" from Sander Vanheule <sander@svanheule.net>: 2021-05-19 17:00:40 +01:00
init Merge branch 'akpm' (patches from Andrew) 2021-05-07 00:34:51 -07:00
ipc ipc/sem.c: spelling fix 2021-05-07 00:26:34 -07:00
kernel A set of scheduler updates: 2021-05-09 13:14:34 -07:00
lib Kbuild updates for v5.13 (2nd) 2021-05-08 10:00:11 -07:00
LICENSES LICENSES: Add the CC-BY-4.0 license 2020-12-08 10:33:27 -07:00
mm mm: fix typos in comments 2021-05-07 00:26:35 -07:00
net Networking fixes for 5.13-rc1, including fixes from bpf, can 2021-05-08 08:31:46 -07:00
samples Kbuild updates for v5.13 (2nd) 2021-05-08 10:00:11 -07:00
scripts Kbuild updates for v5.13 (2nd) 2021-05-08 10:00:11 -07:00
security Simple code cleanup 2021-05-05 12:08:06 -07:00
sound sound fixes for 5.13-rc1 2021-05-07 11:40:18 -07:00
tools Kbuild updates for v5.13 (2nd) 2021-05-08 10:00:11 -07:00
usr .gitignore: prefix local generated files with a slash 2021-05-02 00:43:35 +09:00
virt KVM: Boost vCPU candidate in user mode which is delivering interrupt 2021-04-21 12:20:03 -04:00
.clang-format cxl for 5.12 2021-02-24 09:38:36 -08:00
.cocciconfig scripts: add Linux .cocciconfig for coccinelle 2016-07-22 12:13:39 +02:00
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap It's been a relatively busy cycle in docsland, though more than usually 2021-04-26 13:22:43 -07:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: move Murali Karicheri to credits 2021-04-29 15:47:30 -07:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS Networking fixes for 5.13-rc1, including fixes from bpf, can 2021-05-08 08:31:46 -07:00
Makefile Linux 5.13-rc1 2021-05-09 14:17:44 -07:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.