No description
  • C 96.8%
  • Assembly 0.9%
  • Rust 0.7%
  • Shell 0.6%
  • Python 0.5%
  • Other 0.3%
Find a file
Eric Dumazet a51d233ccd bnxt_en: fix DMA mapping length for padded small packets
Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412
NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces:

  DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000
        [fault reason 0x06] PTE Read access is not set
  bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001
  ...
  NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out

The fault address (0xfc499000) is on an exact 4KB page boundary,
pointing to a DMA read buffer overrun.

In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes),
such as 42-byte untagged ARP frames, are padded:

    if (length < BNXT_MIN_PKT_SIZE) {
        pad = BNXT_MIN_PKT_SIZE - length;
        if (skb_pad(skb, pad))
            goto tx_kick_pending;
        length = BNXT_MIN_PKT_SIZE;
    }

    mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
    ...
    dma_unmap_len_set(tx_buf, len, len);

However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes)
and is left unadjusted after padding. Consequently, dma_map_single() and
dma_unmap_len_set() map and track only 42 bytes.

Later, the hardware TX buffer descriptor is programmed with the padded length:

    txbd->tx_bd_len_flags_type =
        cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags |
                    TX_BD_FLAGS_PACKET_END);

The NIC DMA engine is thus instructed to read 52 bytes from a region where
only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB
page (within 'pad' bytes of the next page), the hardware DMA read overruns
into the unmapped adjacent page, triggering an IOMMU fault.

This issue was exposed after commit 447cbe95eb ("vlan: fix skb_under_panic
and races when toggling HW VLAN offload") because reserving extra VLAN
headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data
offsets and potentially causing small frames to land right against page
boundaries.

Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in
bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled,
because padding might linearize the skb.
This ensures skb->len and skb_headlen(skb) reflect the padded size so
that dma_map_single() maps the full buffer and the descriptor length is
consistent. This also removes the temporary 'pad' variable and masking logic.

The padding is done after the SW USO branch, otherwise
bnxt_sw_udp_gso_xmit() would account the padding as UDP payload
and send it in extra segments.

Note that SW USO segments are still not padded: with IPv4, a segment
carrying less than 10 bytes of UDP payload (small gso_size, or a short
last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE.
This is a separate issue, left for a followup patch.

Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Cc: stable@vger.kernel.org
Reported-by: Stefan Fleischmann <sfle@kth.se>
Closes: https://lore.kernel.org/netdev/20261004122616.56714cbd@nargothrond/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20261007051747.455273-1-edumazet@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
History 2026-10-07 17:53:31 -07:00
arch
block
certs
crypto
Documentation
drivers
fs
include
init
io_uring
ipc
kernel
lib
LICENSES
mm
net
rust
samples
scripts
security
sound
tools
usr
virt
.clang-format
.clippy.toml
.cocciconfig
.editorconfig
.get_maintainer.ignore
.gitattributes
.gitignore
.mailmap
.pylintrc
.rustfmt.toml
COPYING
CREDITS
Kbuild
Kconfig
MAINTAINERS
Makefile
README

Linux kernel
============

The Linux kernel is the core of any Linux operating system. It manages hardware,
system resources, and provides the fundamental services for all other software.

Quick Start
-----------

* Report a bug: See Documentation/admin-guide/reporting-issues.rst
* Get the latest kernel: https://kernel.org
* Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst
* Join the community: https://lore.kernel.org/

Essential Documentation
-----------------------

All users should be familiar with:

* Building requirements: Documentation/process/changes.rst
* Code of Conduct: Documentation/process/code-of-conduct.rst
* License: See COPYING

Documentation can be built with make htmldocs or viewed online at:
https://www.kernel.org/doc/html/latest/


Who Are You?
============

Find your role below:

* New Kernel Developer: Getting started with kernel development
* Academic Researcher: Studying kernel internals and architecture
* Security Expert: Hardening and vulnerability analysis
* Backport/Maintenance Engineer: Maintaining stable kernels
* System Administrator: Configuring and troubleshooting
* Maintainer: Leading subsystems and reviewing patches
* Hardware Vendor: Writing drivers for new hardware
* Distribution Maintainer: Packaging kernels for distros
* AI Coding Assistant: LLMs and AI-powered development tools


For Specific Users
==================

New Kernel Developer
--------------------

Welcome! Start your kernel development journey here:

* Getting Started: Documentation/process/development-process.rst
* Your First Patch: Documentation/process/submitting-patches.rst
* Coding Style: Documentation/process/coding-style.rst
* Build System: Documentation/kbuild/index.rst
* Development Tools: Documentation/dev-tools/index.rst
* Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst
* Core APIs: Documentation/core-api/index.rst

Academic Researcher
-------------------

Explore the kernel's architecture and internals:

* Researcher Guidelines: Documentation/process/researcher-guidelines.rst
* Memory Management: Documentation/mm/index.rst
* Scheduler: Documentation/scheduler/index.rst
* Networking Stack: Documentation/networking/index.rst
* Filesystems: Documentation/filesystems/index.rst
* RCU (Read-Copy Update): Documentation/RCU/index.rst
* Locking Primitives: Documentation/locking/index.rst
* Power Management: Documentation/power/index.rst

Security Expert
---------------

Security documentation and hardening guides:

* Security Documentation: Documentation/security/index.rst
* LSM Development: Documentation/security/lsm-development.rst
* Self Protection: Documentation/security/self-protection.rst
* Reporting Vulnerabilities: Documentation/process/security-bugs.rst
* CVE Procedures: Documentation/process/cve.rst
* Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst
* Security Features: Documentation/userspace-api/seccomp_filter.rst

Backport/Maintenance Engineer
-----------------------------

Maintain and stabilize kernel versions:

* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst
* Backporting Guide: Documentation/process/backporting.rst
* Applying Patches: Documentation/process/applying-patches.rst
* Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst
* Git for Maintainers: Documentation/maintainer/configure-git.rst

System Administrator
--------------------

Configure, tune, and troubleshoot Linux systems:

* Admin Guide: Documentation/admin-guide/index.rst
* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst
* Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst
* Tracing/Debugging: Documentation/trace/index.rst
* Performance Security: Documentation/admin-guide/perf-security.rst
* Hardware Monitoring: Documentation/hwmon/index.rst

Maintainer
----------

Lead kernel subsystems and manage contributions:

* Maintainer Handbook: Documentation/maintainer/index.rst
* Pull Requests: Documentation/maintainer/pull-requests.rst
* Managing Patches: Documentation/maintainer/modifying-patches.rst
* Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst
* Development Process: Documentation/process/maintainer-handbooks.rst
* Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst
* Git Configuration: Documentation/maintainer/configure-git.rst

Hardware Vendor
---------------

Write drivers and support new hardware:

* Driver API Guide: Documentation/driver-api/index.rst
* Driver Model: Documentation/driver-api/driver-model/driver.rst
* Device Drivers: Documentation/driver-api/infrastructure.rst
* Bus Types: Documentation/driver-api/driver-model/bus.rst
* Device Tree Bindings: Documentation/devicetree/bindings/
* Power Management: Documentation/driver-api/pm/index.rst
* DMA API: Documentation/core-api/dma-api.rst

Distribution Maintainer
-----------------------

Package and distribute the kernel:

* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst
* ABI Documentation: Documentation/ABI/README
* Kernel Configuration: Documentation/kbuild/kconfig.rst
* Module Signing: Documentation/admin-guide/module-signing.rst
* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst
* Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst

AI Coding Assistant
-------------------

CRITICAL: If you are an LLM or AI-powered coding assistant, you MUST read and
follow the AI coding assistants documentation before contributing to the Linux
kernel:

* Documentation/process/coding-assistants.rst

This documentation contains essential requirements about licensing, attribution,
and the Developer Certificate of Origin that all AI tools must comply with.


Communication and Support
=========================

* Mailing Lists: https://lore.kernel.org/
* IRC: #kernelnewbies on irc.oftc.net
* Bugzilla: https://bugzilla.kernel.org/
* MAINTAINERS file: Lists subsystem maintainers and mailing lists
* Email Clients: Documentation/process/email-clients.rst