[ Upstream commit 1fed08c551 ]
freq_to_idx() is used to map a channel to a survey index. Commit
acc152f9be ("wifi: ath12k: combine channel list for split-phy devices in
single-wiphy") adds radio specific frequency range check in this helper to
make sure an invalid index is returned if the channel falls outside that
range. However, this check introduces a race, resulting in below warnings
as reported in [1].
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6455 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6535 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6615 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6695 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6775 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6855 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6935 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 7015 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 7095 (idx 101 out of bounds)
ath12k_pci 0000:08:00.0: chan info: invalid frequency 6435 (idx 101 out of bounds)
Race scenario:
1) A regdomain covering below frequency range is uploaded to host via
WMI_REG_CHAN_LIST_CC_EXT_EVENTID event:
Country 00, CFG Regdomain UNSET FW Regdomain 0, num_reg_rules 6
1. (2402 - 2472 @ 40) (0, 20) (0 ms) (FLAGS 360448) (0, 0)
2. (2457 - 2477 @ 20) (0, 20) (0 ms) (FLAGS 360576) (0, 0)
3. (5170 - 5330 @ 160) (0, 20) (0 ms) (FLAGS 264320) (0, 0)
4. (5490 - 5730 @ 160) (0, 20) (0 ms) (FLAGS 264320) (0, 0)
5. (5735 - 5895 @ 160) (0, 20) (0 ms) (FLAGS 264320) (0, 0)
6. (5925 - 7125 @ 320) (0, 24) (0 ms) (FLAGS 2056) (0, 255)
As a result, radio frequency range is updated as [2402, 7125]
ath12k_pci 0000:08:00.0: mac pdev 0 freq limit updated. New range 2402->7125 MHz
If no scan in progress or after scan finished, command
WMI_SCAN_CHAN_LIST_CMDID is sent to firmware notifying that firmware
is allowed to do scan on all channels within that range.
The running path is:
/* redomain uploaded */
1. WMI_REG_CHAN_LIST_CC_EXT_EVENTID
2. ath12k_reg_chan_list_event()
3. ath12k_reg_handle_chan_list()
4. queue_work(..., &ar->regd_update_work)
5. ath12k_regd_update_work()
6. ath12k_regd_update()
/* update radio frequency range */
7. ath12k_mac_update_freq_range()
8. regulatory_set_wiphy_regd()
9. ath12k_reg_notifier()
10. ath12k_reg_update_chan_list()
11. queue_work(..., &ar->regd_channel_update_work)
12. ath12k_regd_update_chan_list_work()
/* wait scan finishes */
13. wait_for_completion_timeout(&ar->scan.completed, ...)
/* command notifying list of valid channels */
14. ath12k_wmi_send_scan_chan_list_cmd()
2) Hardware scan is triggered on all allowed channels.
3) Before scan completed, 11D mechanism detects a new country code
ath12k_pci 0000:08:00.0: wmi 11d new cc GB
With this code sent to firmware, firmware uploads a new regdomain
Country GB, CFG Regdomain ETSI FW Regdomain 2, num_reg_rules 9
1. (2402 - 2482 @ 40) (0, 20) (0 ms) (FLAGS 360448) (0, 0)
2. (5170 - 5250 @ 80) (0, 23) (0 ms) (FLAGS 264192) (0, 0)
3. (5250 - 5330 @ 80) (0, 23) (0 ms) (FLAGS 264216) (0, 0)
4. (5490 - 5590 @ 80) (0, 30) (0 ms) (FLAGS 264208)
5. (5590 - 5650 @ 40) (0, 30) (600000 ms) (FLAGS 264208)
6. (5650 - 5730 @ 80) (0, 30) (0 ms) (FLAGS 264208)
7. (5735 - 5875 @ 80) (0, 14) (0 ms) (FLAGS 264192) (0, 0)
8. (5855 - 5875 @ 20) (0, 14) (0 ms) (FLAGS 264192) (0, 0)
9. (5945 - 6425 @ 320) (0, 24) (0 ms) (FLAGS 2056) (0, 11)
Then radio frequency range is updated as [2402, 6425]
ath12k_pci 0000:08:00.0: mac pdev 0 freq limit updated. New range 2402->6425 MHz
Please note this is a smaller range than the previous one. Later host
runs the same path for the purpose of notifying the new channel list.
However since scan not completed, host just waits there. Meanwhile,
firmware is possibly scanning channels outside the new range. As a
result, WMI_CHAN_INFO_EVENTID events for those channels fail
freq_to_idx() check and triggers warnings above.
Fix this issue by removing radio frequency check in freq_to_idx(). This is
valid because channels being scanned do not synchronize with frequency
range update. Besides, this won't cause any problem, since freq_to_idx()
is only used for survey data. Even out-of-range channels filled in the
survey, they won't get delivered to userspace due to the range check
already there in ath12k_mac_op_get_survey().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: acc152f9be ("wifi: ath12k: combine channel list for split-phy devices in single-wiphy")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220871 # 1
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108-ath12k-fix-freq-to-idx-v1-1-b2458cf7aa0d@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
a57459614a