mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-16 22:39:48 +00:00
No description
- C 96.9%
- Assembly 0.9%
- Rust 0.6%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
c7613530d1
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated firmware paths to the device specific firmware for modem and WiFi, to allow these to be pushed to linux-next. The Longcheer L8150 gains extcon support and the interrupt configuration for the accelerometer and magnetometer are corrected. MSM8998 gained descriptions for the multimedia clock controller and iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is updated to access the CRC corrected value space, the white LED (for backlight) found in PMI8998 is described and GCC gains references to the missing XO and sleep_clk reference clocks. On top of this initial support for the Fxtec Pro1 QX1000 is added and then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium, with USB, touchscreen, SDHCI, Bluetooth and vibrator supported. The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was added, with support for frame buffer, GPU, audio, video encoder/decoder and touchscreen. The USB controller and PHY found in IPA6018 is described to provide USB support. IPQ8074 gains a description of the SPMI controller. The highlight on SC7180 is the introduction of the just released "Homestar" device. CPU power coefficients are corrected based on measurements, IMEM is described to ensure that remoteproc relocation information is carried to post mortem debug tools and a few smaller fixes are introduced. The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones, modem, CPU topology and updated memory map. On SDM845 the "Limits hardware" is described and increases the throttling temperature of the hardware from ~70C to 95C, with up to 30% improvement in benchmarks as result. Relying on hardware throttling and thermal pressure, the CPU cooling devices are dropped. The power for the second WiFi channel is properly described for the Lenovo Yoga C630, to ensure they are both powered. reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660. Initial support for the Snapdragon 690 (aka SM6350) is introduced, with support for clocks, regulators, pinctrl, storage, thermal sensors, USB, SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is introduced. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFmFhUbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FJe8P/080MWq7pknxqFT46bSN FbrK7Hd/TVly3Lx+aWmhyyAIl2qcsD0oEs8bB61j9bCTD4RWfRNSLNMv4/QNWeni LqXaJZJzoCxMq+F9h1NAZcDoZrUb3/yz5EZDh/3kRU4bJ+TNQSmRxRA30Elv7FEr TQuqWdSYe1laWS/j687lQ099TaHo7k06pR0JSiRK5QSeGYp/L65xc1ys/D7SthZA cK21++sKo26W3r1rmIuSPUWONF+LYiT04dTk8vO+X7RfzW8C7onuqN/cWhe+nb+h JMxnvup7h542Wh/6TpgNAGa2ikxXEZHP1NA6WVhcp6CdGRjE+2CYHCzX11IJA09Y 26GsLu6Vtd7BN/kxdxs99h45PuZlt1WurnTUCUHqlCXqZx9mSRtSZpnJAMdGCiOS qmWkAukFTqde48TzvhjdW9OejVPzUGsWthtFYoImM3Sywg7nlRPw6HAZQNAlcVU4 RwwLV4lDEMxofliXb15hjxpA4hzhyPebQ6JQmrl/e29RKj/TPwpx/C5N1XacJjX4 2QYq25dzEUaZNK2XiO5BL99jl9zGUdDRDGpPzey2/XaVBF0cgcDNf65jqtBrk/Yp +WPcv2Q+EGcgCYJE2JalFyk6YhkLV/Qj7Fo04BKP9OF6p+EKyMq66hM9WXIkjvuK QCt16FsrcTip5Whzcuqbt/lT =nWS9 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvLHYACgkQmmx57+YA GNnnWQ//XBbJhCfn2m3OG5+vhtuMf3+PqkBph4/UUpHhMn7nM/UDfVvnkFo8NPYS wy3QaUsJ1jncdHiVxypjF4w6+c5sAi4jU3Mz48vJwyDt0UA6zg7Odb9h4vzt6PCI v7eqdSPe5JHrrxmIcTsyhqV5s/3ozWvnq3gy5kabtdYffMz/IsccNF9LhXaOAiHh weCHPR2IGNpiaKSRx92Se+zHLw0Whzmx27k8+t6kg4MkiiZQQxbu2vNx1KVYEhMY sOkHdiEqjd8hRCMXXn7KOTnkJYQwCjLWeMcBSo9LDGy0dmxIol/2v378b5vWiYRh 43zBqL9w7nu+lZkW+Qur8319Squ+WsKz0sDCvMZ2k5IZLnKWGeMuUpU40Bdsf8iD yQ/YyCcBehgWJ0X0uXDuL5az31YNUHuzA0qvc9TNhaRBEG7R95ZbSs7QIDnGGeW2 5FdA4UhpT4p1SvhJ+a2ev3GJtgmuw3+kPwXGY+CIEFbNLSY+mpLaH5sxjrSUxyJg wyEPQSuFwFD4FzlXUZ8Ccpn2eVnjJe9zxWv+5Wm2ne0ORM1Zcm6L0wvxAroSl1H3 WB5ACCoPSQhdpQ7G/Sie5dbzYO9owZ6o3BSgGXGubT/QJuCvFvqtMehKjv/ZjTk9 vY6Y9U6ULHK514Dku/TMWJuZv0tLhNMXyfEPCu7JPk9797fAWAE= =fbG2 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 dts updates for v5.16 MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated firmware paths to the device specific firmware for modem and WiFi, to allow these to be pushed to linux-next. The Longcheer L8150 gains extcon support and the interrupt configuration for the accelerometer and magnetometer are corrected. MSM8998 gained descriptions for the multimedia clock controller and iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is updated to access the CRC corrected value space, the white LED (for backlight) found in PMI8998 is described and GCC gains references to the missing XO and sleep_clk reference clocks. On top of this initial support for the Fxtec Pro1 QX1000 is added and then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium, with USB, touchscreen, SDHCI, Bluetooth and vibrator supported. The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was added, with support for frame buffer, GPU, audio, video encoder/decoder and touchscreen. The USB controller and PHY found in IPA6018 is described to provide USB support. IPQ8074 gains a description of the SPMI controller. The highlight on SC7180 is the introduction of the just released "Homestar" device. CPU power coefficients are corrected based on measurements, IMEM is described to ensure that remoteproc relocation information is carried to post mortem debug tools and a few smaller fixes are introduced. The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones, modem, CPU topology and updated memory map. On SDM845 the "Limits hardware" is described and increases the throttling temperature of the hardware from ~70C to 95C, with up to 30% improvement in benchmarks as result. Relying on hardware throttling and thermal pressure, the CPU cooling devices are dropped. The power for the second WiFi channel is properly described for the Lenovo Yoga C630, to ensure they are both powered. reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660. Initial support for the Snapdragon 690 (aka SM6350) is introduced, with support for clocks, regulators, pinctrl, storage, thermal sensors, USB, SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is introduced. * tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits) arm64: dts: qcom: sdm630-nile: Correct regulator label name arm64: dts: qcom: sm6125: Improve indentation of multiline properties arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000 arm64: dts: qcom: sc7280: Update Q6V5 MSS node arm64: dts: qcom: sc7280: Add Q6V5 MSS node arm64: dts: qcom: sc7280: Add nodes to boot modem arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes arm64: dts: qcom: sc7280: Update reserved memory map arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000 arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts arm64: dts: qcom: sc7180: Add IMEM and pil info regions arm64: dts: qcom: pm6150l: Add missing include arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1 ... Link: https://lore.kernel.org/r/20211012231155.1036519-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.