mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-14 05:55:17 +00:00
No description
- C 96.9%
- Assembly 0.9%
- Rust 0.6%
- Shell 0.6%
- Python 0.5%
- Other 0.3%
c8b53b1c6b
please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl+9i0cACgkQh9CWnEQH BwRLLBAApKr8uw8YxinKC2FlktnR+7/j3fOI/wmlfrqfqJRPxng1YIOFfBrvopSi S/0nJZXbSnsqJxnu9YEo5grl/ZTtADuBIpOa2AFvf4JgeIrCW/jkJ1shrh/Flg8U XnSh9VjSPpM4074spdwyQ7BvGAsiEk3Z71Bv8rArM81sHvLprqE61HeO30F4c8Ca UaJef7eypnEw0YOsibmphpmoYIjhA53nzZi1d9sTMZMvoaN4/JRj54i97glMPwmh g7338yVrKdrtf7xg9Q/zFt+yZZ1GeeafbrkEivG6NsXW69WNaDJAFbF+SwcPjNW4 vLXQp9xjz2cKzQHQcoFpGuSmscTmTli1IaEUl3jU8e9GPgpaRyNkvKoZEHnGvT5u 3Hrmi3uXn5IS3oO0PgDYLJXISrD02gEzFmuXx5cfDMM9qDIYS0pXndbgulhjxMQi e4W2yeXP9NpLAVBOdJftDY5+AgH5ddZOJ5c5nRF9C3DENhvBuzqCVgalKM4AYA/z PjlRkjwIVblRHxYJO1S0rTLN51qHwvc/XVaWqVKz4P9zOW1UtbLEZALFVSnv1RFz /VyJMupGB6J2U/6ig+2YyfRoDvopgYtEm7F4i3Xza9pBWj+tpO71ncFMGTUd4omM jOC36Fti336TvqJyR2wJ9JAdf/035QZnikFz89t8PA6pDcCkRWw= =oWAD -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
History
|
|
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.