linux/drivers/mmc/core
Jialing Fu 4a0b1afccd mmc: core: fix race condition in mmc_wait_data_done
commit 71f8a4b81d upstream.

The following panic is captured in ker3.14, but the issue still exists
in latest kernel.
---------------------------------------------------------------------
[   20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference
at virtual address 00000578
......
[   20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60
[   20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60
[   20.740134] c0 3136 (Compiler) Call trace:
[   20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60
[   20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54
[   20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34
[   20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220
[   20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264
[   20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158
[   20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4
[   20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0
[   20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac
[   20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c
----------------------------------------------------------------------
Because in SMP, "mrq" has race condition between below two paths:
path1: CPU0: <tasklet context>
  static void mmc_wait_data_done(struct mmc_request *mrq)
  {
     mrq->host->context_info.is_done_rcv = true;
     //
     // If CPU0 has just finished "is_done_rcv = true" in path1, and at
     // this moment, IRQ or ICache line missing happens in CPU0.
     // What happens in CPU1 (path2)?
     //
     // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode:
     // path2 would have chance to break from wait_event_interruptible
     // in mmc_wait_for_data_req_done and continue to run for next
     // mmc_request (mmc_blk_rw_rq_prep).
     //
     // Within mmc_blk_rq_prep, mrq is cleared to 0.
     // If below line still gets host from "mrq" as the result of
     // compiler, the panic happens as we traced.
     wake_up_interruptible(&mrq->host->context_info.wait);
  }

path2: CPU1: <The mmcqd thread runs mmc_queue_thread>
  static int mmc_wait_for_data_req_done(...
  {
     ...
     while (1) {
           wait_event_interruptible(context_info->wait,
                   (context_info->is_done_rcv ||
                    context_info->is_new_req));
     	   static void mmc_blk_rw_rq_prep(...
           {
           ...
           memset(brq, 0, sizeof(struct mmc_blk_request));

This issue happens very coincidentally; however adding mdelay(1) in
mmc_wait_data_done as below could duplicate it easily.

   static void mmc_wait_data_done(struct mmc_request *mrq)
   {
     mrq->host->context_info.is_done_rcv = true;
+    mdelay(1);
     wake_up_interruptible(&mrq->host->context_info.wait);
    }

At runtime, IRQ or ICache line missing may just happen at the same place
of the mdelay(1).

This patch gets the mmc_context_info at the beginning of function, it can
avoid this race condition.

Signed-off-by: Jialing Fu <jlfu@marvell.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 2220eedfd7 ("mmc: fix async request mechanism ....")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
History 2015-09-30 13:20:49 +01:00
..
bus.c mmc: add support for HS400 mode of eMMC5.0 2014-05-12 18:06:06 -04:00
bus.h mmc: rename dev_to_mmc_card() to mmc_dev_to_card() 2010-10-23 21:11:12 +08:00
core.c mmc: core: fix race condition in mmc_wait_data_done 2015-09-30 13:20:49 +01:00
core.h mmc: core: Let mmc_set_signal_voltage take ocr as parameter 2013-10-30 20:26:26 -04:00
debugfs.c mmc: add support for HS400 mode of eMMC5.0 2014-05-12 18:06:06 -04:00
host.c mmc: core: add DT bindings for eMMC HS400 1.8/1.2V 2014-05-12 18:08:10 -04:00
host.h mmc: start removing enable / disable API 2012-03-27 12:20:03 -04:00
Kconfig mmc: core: Use MMC_UNSAFE_RESUME as default behavior 2014-02-13 22:58:15 -05:00
Makefile mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions 2012-07-10 23:04:04 -04:00
mmc.c mmc: add support for HS400 mode of eMMC5.0 2014-05-12 18:06:06 -04:00
mmc_ops.c mmc: core: Fixup busy detection for mmc switch operations 2014-02-23 10:40:38 -05:00
mmc_ops.h mmc: core: Restructure and simplify code for mmc sleep|awake 2013-05-26 14:23:17 -04:00
quirks.c mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling 2014-01-17 22:55:01 -05:00
sd.c mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required 2011-10-31 19:32:06 -04:00
sd_ops.h mmc: add erase, secure erase, trim and secure trim operations 2010-08-12 08:43:30 -07:00
sdio.c mmc: core: sdio: Fix unconditional wake_up_process() on sdio thread 2014-11-14 15:20:06 +00:00
sdio_bus.c mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus 2014-04-22 07:06:40 -04:00
sdio_bus.h mmc: basic SDIO device model 2007-09-23 19:45:31 +02:00
sdio_cis.c mmc: sdio: Change pr_warning to pr_warn_ratelimited 2012-07-22 15:25:48 -04:00
sdio_cis.h sdio: split up common and function CIS parsing 2007-09-23 20:44:22 +02:00
sdio_io.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_irq.c mmc: core: sdio: Fix unconditional wake_up_process() on sdio thread 2014-11-14 15:20:06 +00:00
sdio_ops.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_ops.h sdio: recognize io card without powercycle 2010-03-12 15:52:28 -08:00
slot-gpio.c mmc: don't request CD IRQ until mmc_start_host() 2014-11-14 15:20:07 +00:00