..
accel
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
2017-08-16 13:43:20 -07:00
adc
iio: adc: ti-ads1015: add 10% to conversion wait time
2017-12-09 22:01:49 +01:00
amplifiers
spi: Updates for v4.4
2015-11-05 13:15:12 -08:00
buffer
iio: add resource managed triggered buffer init helpers
2016-09-04 15:42:46 +01:00
chemical
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
2016-10-23 22:18:27 +01:00
common
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
2017-08-30 10:21:53 +02:00
dac
iio: dac: ad7303: fix channel description
2017-05-25 15:44:37 +02:00
dummy
iio: dummy: events: Add missing break
2017-10-27 10:38:06 +02:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
iio: bmg160: reset chip when probing
2017-04-12 12:41:11 +02:00
health
iio: health: max30100: fixed parenthesis around FIFO count check
2017-02-09 08:08:30 +01:00
humidity
iio: dht11: Use usleep_range instead of msleep for start signal
2017-02-09 08:08:30 +01:00
imu
iio: imu: adis16480: Fix acceleration scale factor for adis16480
2017-08-30 10:21:53 +02:00
light
iio: light: fix improper return value
2017-11-30 08:39:13 +00:00
magnetometer
iio: magnetometer: mag3110: claim direct mode during raw writes
2017-11-15 15:53:14 +01:00
orientation
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
2016-11-05 17:47:47 +00:00
potentiometer
iio: potentiometer: Fix typo in Kconfig
2016-07-03 12:40:01 +01:00
pressure
iio: pressure: ms5611: claim direct mode during oversampling changes
2017-11-15 15:53:14 +01:00
proximity
iio: proximity: sx9500: claim direct mode during raw proximity reads
2017-11-15 15:53:14 +01:00
temperature
iio: maxim_thermocouple: detect invalid storage size in read()
2016-11-13 10:08:32 +01:00
trigger
iio: trigger: free trigger resource correctly
2017-11-15 15:53:14 +01:00
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
iio_core_trigger.h
iio: fix semicolon in io_core_trigger.h
2013-08-03 18:40:32 +01:00
industrialio-buffer.c
iio: ensure ret is initialized to zero before entering do loop
2016-09-05 21:00:14 +01:00
industrialio-configfs.c
iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
2015-12-05 16:25:30 +00:00
industrialio-core.c
iio: core: Return error for failed read_reg
2017-10-12 11:51:18 +02:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
iio: core: fix ptr_ret.cocci warnings
2016-01-20 17:09:18 -08:00
industrialio-trigger.c
iio: trigger: helpers to determine own trigger
2016-09-10 16:49:14 +01:00
industrialio-triggered-event.c
iio: Support triggered events
2015-08-27 20:47:09 +01:00
inkern.c
iio: core: Add devm_ APIs for iio_channel_{get,release}_all
2016-04-19 19:58:15 +01:00
Kconfig
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
Makefile
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00