linux/drivers/phy
Jonas Karlman f309ac8a4d phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write
[ Upstream commit 19a1d46bd6 ]

inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.

Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.

Fixes: 53706a1168 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
History 2023-09-13 09:42:58 +02:00
..
allwinner phy: sun4i-usb: Add support for the H616 USB PHY 2023-01-04 11:28:56 +01:00
amlogic phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value 2023-06-09 10:33:58 +02:00
broadcom phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional() 2023-05-01 08:26:27 +09:00
cadence phy: cadence-torrent: Remove unused regmap field from state struct 2022-07-08 10:40:43 +05:30
freescale phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() 2022-10-03 10:34:46 +02:00
hisilicon phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe() 2023-08-03 10:23:59 +02:00
ingenic phy: ingenic: Fix a typo in ingenic_usb_phy_probe() 2021-03-30 23:35:17 +05:30
intel phy: intel: Use dev_err_probe() to simplify code 2022-09-24 12:34:56 +05:30
lantiq phy: lantiq: rcu-usb2: wait after clock enable 2021-01-13 19:29:03 +05:30
marvell phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on 2022-12-31 13:32:46 +01:00
mediatek phy: phy-mtk-dp: Fix an error code in probe() 2023-08-03 10:23:56 +02:00
microchip phy-for-6.1 2022-10-07 16:03:01 -07:00
motorola treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2) 2022-06-10 14:51:35 +02:00
mscc treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
qualcomm phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code 2023-09-13 09:42:20 +02:00
ralink phy: ralink: mt7621-pci: add sentinel to quirks table 2022-11-05 13:01:25 +05:30
renesas phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2L 2021-08-06 18:12:30 +05:30
rockchip phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write 2023-09-13 09:42:58 +02:00
samsung pci-v5.20-changes 2022-08-04 19:30:35 -07:00
socionext phy: uniphier-usb3ss: fix unintended writing zeros to PHY register 2021-12-24 10:06:38 +05:30
st phy: st: miphy28lp: use _poll_timeout functions for waits 2023-05-24 17:32:41 +01:00
sunplus phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() 2023-02-01 08:34:09 +01:00
tegra phy: tegra: xusb: check return value of devm_kzalloc() 2023-07-19 16:21:58 +02:00
ti phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select() 2023-05-11 23:03:37 +09:00
xilinx phy: xilinx: zynqmp: Fix bus width setting for SGMII 2022-01-27 10:55:26 +05:30
Kconfig phy: usb: Add USB2.0 phy driver for Sunplus SP7021 2022-09-02 21:01:24 +05:30
Makefile phy: usb: Add USB2.0 phy driver for Sunplus SP7021 2022-09-02 21:01:24 +05:30
phy-can-transceiver.c phy: phy-can-transceiver: Skip warning if no "max-bitrate" 2023-02-01 08:34:25 +01:00
phy-core-mipi-dphy.c phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure}) 2022-02-25 14:14:06 +05:30
phy-core.c phy: core: Warn when phy_power_on is called before phy_init 2022-04-20 14:45:15 +05:30
phy-lgm-usb.c phy: Add USB3 PHY support for Intel LGM SoC 2020-09-11 17:12:49 +05:30
phy-lpc18xx-usb-otg.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
phy-pistachio-usb.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 2019-06-05 17:37:15 +02:00
phy-xgene.c phy: phy-xgene.c: Fix alignment of comment 2021-05-31 14:08:55 +05:30