According to the cdns3 datasheet, the EPRST (Endpoint Reset) command
causes the DMA engine to reposition its internal pointer to the next
Transfer Descriptor (TD) if it was already processing one.
This issue is consistently observed during the ADB identification
process on macOS hosts, where the host issues a Clear_Halt. Although
commit 4bf2dd6513 ("usb: cdns3: gadget: toggle cycle bit before reset
endpoint") attempted to avoid DMA advance by toggling the cycle bit,
trace logs show that on certain hosts like macOS, the DMA pointer
(EP_TRADDR) still shifts after EPRST:
cdns3_ctrl_req: Clear Endpoint Feature(Halt ep1out)
cdns3_doorbell_epx: ep1out, ep_trbaddr f9c04030 <-- Should be f9c04000
cdns3_gadget_giveback: ep1out: req: ... length: 16384/16384
As shown above, the DMA pointer jumped to the next TD, causing
the controller to skip the initial TRBs of the request. This leads to
data misalignment and ADB protocol hangs on macOS.
Fix this by manually restoring the EP_TRADDR register to the starting
physical address of the current request after the EPRST operation is
complete.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260513160012.2547894-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
c8778ff817