mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
5f40cba7d4
On shutdown the connection manager tears down the router tree without signalling connected devices. A Thunderbolt 3 device directly connected to a USB4 host never receives a disconnect indication and during shutdown this can cause polling the dead link for up to 60 seconds. On some platforms this behavior leads to a warm reset instead of a shutdown due to this timeout. Fix this by asserting PORT_CS_19.DPR on each connected downstream port before tearing down the router tree. This drives SBTX low (USB4 spec section 6.9), causing the device to detect SBRX low and transition to Uninitialized Unplugged state immediately. Always do this on system shutdown/reboot by forcing host_reset in the PCI ->shutdown callback. On plain driver unload only do it when the host router was actually reset on load (host_reset=1), since in that case the tunnels are not preserved across reload anyway; with host_reset=0 the tunnels are kept alive across unload/reload so the links are left intact. Restrict the reset to Thunderbolt 3 devices. Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Co-developed-by: Sanath S <Sanath.S@amd.com> Signed-off-by: Sanath S <Sanath.S@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
4044 lines
95 KiB
4044 lines
95 KiB