linux/drivers/gpu/drm/amd/amdgpu/amdgpu.h

1623 lines
51 KiB

dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
2019-06-20 10:18:50 -05:00
drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2) The old mechanism used a per-submission limit that didn't take previous submissions within the same time frame into account. It also filled VRAM slowly when VRAM usage dropped due to a big eviction or buffer deallocation. This new method establishes a configurable MBps limit that is obeyed when VRAM usage is very high. When VRAM usage is not very high, it gives the driver the freedom to fill it quickly. The result is more consistent performance. It can't keep the BO move rate low if lots of evictions are happening due to VRAM fragmentation, or if a big buffer is being migrated. The amdgpu.moverate parameter can be used to set a non-default limit. Measurements can be done to find out which amdgpu.moverate setting gives the best results. Mainly APUs and cards with small VRAM will benefit from this. For F1 2015, anything with 2 GB VRAM or less will benefit. Some benchmark results - F1 2015 (Tonga 2GB): Limit MinFPS AvgFPS Old code: 14 32.6 128 MB/s: 28 41 64 MB/s: 15.5 43 32 MB/s: 28.7 43.4 8 MB/s: 27.8 44.4 8 MB/s: 21.9 42.8 (different run) Random drops in Min FPS can still occur (due to fragmented VRAM?), but the average FPS is much better. 8 MB/s is probably a good limit for this game & the current VRAM management. The random FPS drops are still to be tackled. v2: use a spinlock Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-17 23:49:27 +02:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2) The old mechanism used a per-submission limit that didn't take previous submissions within the same time frame into account. It also filled VRAM slowly when VRAM usage dropped due to a big eviction or buffer deallocation. This new method establishes a configurable MBps limit that is obeyed when VRAM usage is very high. When VRAM usage is not very high, it gives the driver the freedom to fill it quickly. The result is more consistent performance. It can't keep the BO move rate low if lots of evictions are happening due to VRAM fragmentation, or if a big buffer is being migrated. The amdgpu.moverate parameter can be used to set a non-default limit. Measurements can be done to find out which amdgpu.moverate setting gives the best results. Mainly APUs and cards with small VRAM will benefit from this. For F1 2015, anything with 2 GB VRAM or less will benefit. Some benchmark results - F1 2015 (Tonga 2GB): Limit MinFPS AvgFPS Old code: 14 32.6 128 MB/s: 28 41 64 MB/s: 15.5 43 32 MB/s: 28.7 43.4 8 MB/s: 27.8 44.4 8 MB/s: 21.9 42.8 (different run) Random drops in Min FPS can still occur (due to fragmented VRAM?), but the average FPS is much better. 8 MB/s is probably a good limit for this game & the current VRAM management. The random FPS drops are still to be tackled. v2: use a spinlock Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-17 23:49:27 +02:00
drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2) The old mechanism used a per-submission limit that didn't take previous submissions within the same time frame into account. It also filled VRAM slowly when VRAM usage dropped due to a big eviction or buffer deallocation. This new method establishes a configurable MBps limit that is obeyed when VRAM usage is very high. When VRAM usage is not very high, it gives the driver the freedom to fill it quickly. The result is more consistent performance. It can't keep the BO move rate low if lots of evictions are happening due to VRAM fragmentation, or if a big buffer is being migrated. The amdgpu.moverate parameter can be used to set a non-default limit. Measurements can be done to find out which amdgpu.moverate setting gives the best results. Mainly APUs and cards with small VRAM will benefit from this. For F1 2015, anything with 2 GB VRAM or less will benefit. Some benchmark results - F1 2015 (Tonga 2GB): Limit MinFPS AvgFPS Old code: 14 32.6 128 MB/s: 28 41 64 MB/s: 15.5 43 32 MB/s: 28.7 43.4 8 MB/s: 27.8 44.4 8 MB/s: 21.9 42.8 (different run) Random drops in Min FPS can still occur (due to fragmented VRAM?), but the average FPS is much better. 8 MB/s is probably a good limit for this game & the current VRAM management. The random FPS drops are still to be tackled. v2: use a spinlock Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-17 23:49:27 +02:00
drm/amdgpu: not remove sysfs if not create sysfs When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-29 16:05:55 +08:00
2022-03-30 15:31:00 -04:00
drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmIWLSEACgkQ/lWMcqZw E8OP7hAAjix94EX5fhFa7OAdqUbFtsiKhK/4zNtV9FWpFiEsDBz+dlbfDQWIx5an FIiiiQtSfWjpDv6pcMhoNf80w+dDbc/Cuauz6nNGO7Pkaerh2D/EPG74FD7f7nE3 EIScVs1heYtzM9usKrFKupNYgIdgZxmeovClWuE0OTjLOes2PGvvxXK6iJqNqJMX VlDO5SR7GRqsDUDV6vmwl63uKL77xJXAahAXIx+BQ/1xrtEhlu6NwsgHIsmPmMSN YluX34zc1xD/6/uUqvEdp7u46/5/He1c5Q/ia1WV3wRxsO/eMZ+axXqCZP3XGZdt rMdGNtj1MWKkudYiowStWkCVSG/0fXJCFIAhvRmeZy+YqPdVlqZ2W7g4H1l9iJoo UVfT9cHrKoxHsukvIEckC5Ov9v1yr39Bd4wUuqaUTUSxY8VID5vjY63TsXl9Zke1 SluTFe9qybbnRNz/hYRvwIS1eT8HvUauAfAhypGTLI5DYHTD7PawcfMJkNzCtJm4 Ta4SC3rTpkpN+7oc8SoNgqRHQ8U9KL5oksP0wVa8vwHsMptSd3X4pUljc6TcfjLv GEo41D5AuJz3HRVcn9yqPbLoPE2FFB7bfwIMH77yNnoos4Izy/LGhKpN0YdImmI5 W5XVFB0jltGSIhkzLe1mFpLrdJwdUTSUVeCK4H5PhZZQEHLkVtg= =HuwD -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-25 05:30:17 +10:00