linux/include/uapi/linux/io_uring.h

946 lines
24 KiB

Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
2022-06-18 10:00:50 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 11:57:40 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: add option to skip CQE posting Emitting a CQE is expensive from the kernel perspective. Often, it's also not convenient for the userspace, spends some cycles on processing and just complicates the logic. A similar problems goes for linked requests, where we post an CQE for each request in the link. Introduce a new flags, IOSQE_CQE_SKIP_SUCCESS, trying to help with it. When set and a request completed successfully, it won't generate a CQE. When fails, it produces an CQE, but all following linked requests will be CQE-less, regardless whether they have IOSQE_CQE_SKIP_SUCCESS or not. The notion of "fail" is the same as for link failing-cancellation, where it's opcode dependent, and _usually_ result >= 0 is a success, but not always. Linked timeouts are a bit special. When the requests it's linked to was not attempted to be executed, e.g. failing linked requests, it follows the description above. Otherwise, whether a linked timeout will post a completion or not solely depends on IOSQE_CQE_SKIP_SUCCESS of that linked timeout request. Linked timeout never "fail" during execution, so for them it's unconditional. It's expected for users to not really care about the result of it but rely solely on the result of the master request. Another reason for such a treatment is that it's racy, and the timeout callback may be running awhile the master request posts its completion. use case 1: If one doesn't care about results of some requests, e.g. normal timeouts, just set IOSQE_CQE_SKIP_SUCCESS. Error result will still be posted and need to be handled. use case 2: Set IOSQE_CQE_SKIP_SUCCESS for all requests of a link but the last, and it'll post a completion only for the last one if everything goes right, otherwise there will be one only one CQE for the first failed request. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0220fbe06f7cf99e6fc71b4297bb1cb6c0e89c2c.1636559119.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-10 15:49:32 +00:00
io_uring: add option to skip CQE posting Emitting a CQE is expensive from the kernel perspective. Often, it's also not convenient for the userspace, spends some cycles on processing and just complicates the logic. A similar problems goes for linked requests, where we post an CQE for each request in the link. Introduce a new flags, IOSQE_CQE_SKIP_SUCCESS, trying to help with it. When set and a request completed successfully, it won't generate a CQE. When fails, it produces an CQE, but all following linked requests will be CQE-less, regardless whether they have IOSQE_CQE_SKIP_SUCCESS or not. The notion of "fail" is the same as for link failing-cancellation, where it's opcode dependent, and _usually_ result >= 0 is a success, but not always. Linked timeouts are a bit special. When the requests it's linked to was not attempted to be executed, e.g. failing linked requests, it follows the description above. Otherwise, whether a linked timeout will post a completion or not solely depends on IOSQE_CQE_SKIP_SUCCESS of that linked timeout request. Linked timeout never "fail" during execution, so for them it's unconditional. It's expected for users to not really care about the result of it but rely solely on the result of the master request. Another reason for such a treatment is that it's racy, and the timeout callback may be running awhile the master request posts its completion. use case 1: If one doesn't care about results of some requests, e.g. normal timeouts, just set IOSQE_CQE_SKIP_SUCCESS. Error result will still be posted and need to be handled. use case 2: Set IOSQE_CQE_SKIP_SUCCESS for all requests of a link but the last, and it'll post a completion only for the last one if everything goes right, otherwise there will be one only one CQE for the first failed request. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0220fbe06f7cf99e6fc71b4297bb1cb6c0e89c2c.1636559119.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-10 15:49:32 +00:00
io_uring: add IORING_SETUP_DEFER_TASKRUN Allow deferring async tasks until the user calls io_uring_enter(2) with the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at io_uring_setup time. This functionality requires that the later io_uring_enter will be called from the same submission task, and therefore restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also set. Being able to hand pick when tasks are run prevents the problem where there is current work to be done, however task work runs anyway. For example, a common workload would obtain a batch of CQEs, and process each one. Interrupting this to additional taskwork would add latency but not gain anything. If instead task work is deferred to just before more CQEs are obtained then no additional latency is added. The way this is implemented is by trying to keep task work local to a io_ring_ctx, rather than to the submission task. This is required, as the application will want to wake up only a single io_ring_ctx at a time to process work, and so the lists of work have to be kept separate. This has some other benefits like not having to check the task continually in handle_tw_list (and potentially unlocking/locking those), and reducing locks in the submit & process completions path. There are networking cases where using this option can reduce request latency by 50%. For example a contrived example using [1] where the client sends 2k data and receives the same data back while doing some system calls (to trigger task work) shows this reduction. The reason ends up being that if sending responses is delayed by processing task work, then the client side sits idle. Whereas reordering the sends first means that the client runs it's workload in parallel with the local task work. [1]: Using https://github.com/DylanZA/netbench/tree/defer_run Client: ./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000" Server: ./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100" Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-30 05:50:10 -07:00
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 11:57:40 -06:00
2023-06-12 19:04:32 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: allow events and user_data update of running poll requests This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are masked into sqe->len. If set, the POLL_ADD will have the following behavior: - sqe->addr must contain the the user_data of the poll request that needs to be modified. This field is otherwise invalid for a POLL_ADD command. - If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the new mask for the existing poll request. There are no checks for whether these are identical or not, if a matching poll request is found, then it is re-armed with the new mask. - If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new user_data for the existing poll request. A POLL_ADD with any of these flags set may complete with any of the following results: 1) 0, which means that we successfully found the existing poll request specified, and performed the re-arm procedure. Any error from that re-arm will be exposed as a completion event for that original poll request, not for the update request. 2) -ENOENT, if no existing poll request was found with the given user_data. 3) -EALREADY, if the existing poll request was already in the process of being removed/canceled/completing. 4) -EACCES, if an attempt was made to modify an internal poll request (eg not one originally issued ass IORING_OP_POLL_ADD). The usual -EINVAL cases apply as well, if any invalid fields are set in the sqe for this command type. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-17 08:37:41 -06:00
io_uring: allow events and user_data update of running poll requests This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are masked into sqe->len. If set, the POLL_ADD will have the following behavior: - sqe->addr must contain the the user_data of the poll request that needs to be modified. This field is otherwise invalid for a POLL_ADD command. - If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the new mask for the existing poll request. There are no checks for whether these are identical or not, if a matching poll request is found, then it is re-armed with the new mask. - If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new user_data for the existing poll request. A POLL_ADD with any of these flags set may complete with any of the following results: 1) 0, which means that we successfully found the existing poll request specified, and performed the re-arm procedure. Any error from that re-arm will be exposed as a completion event for that original poll request, not for the update request. 2) -ENOENT, if no existing poll request was found with the given user_data. 3) -EALREADY, if the existing poll request was already in the process of being removed/canceled/completing. 4) -EACCES, if an attempt was made to modify an internal poll request (eg not one originally issued ass IORING_OP_POLL_ADD). The usual -EINVAL cases apply as well, if any invalid fields are set in the sqe for this command type. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-17 08:37:41 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring/kbuf: add support for incremental buffer consumption By default, any recv/read operation that uses provided buffers will consume at least 1 buffer fully (and maybe more, in case of bundles). This adds support for incremental consumption, meaning that an application may add large buffers, and each read/recv will just consume the part of the buffer that it needs. For example, let's say an application registers 1MB buffers in a provided buffer ring, for streaming receives. If it gets a short recv, then the full 1MB buffer will be consumed and passed back to the application. With incremental consumption, only the part that was actually used is consumed, and the buffer remains the current one. This means that both the application and the kernel needs to keep track of what the current receive point is. Each recv will still pass back a buffer ID and the size consumed, the only difference is that before the next receive would always be the next buffer in the ring. Now the same buffer ID may return multiple receives, each at an offset into that buffer from where the previous receive left off. Example: Application registers a provided buffer ring, and adds two 32K buffers to the ring. Buffer1 address: 0x1000000 (buffer ID 0) Buffer2 address: 0x2000000 (buffer ID 1) A recv completion is received with the following values: cqe->res 0x1000 (4k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) and the application now knows that 4096b of data is available at 0x1000000, the start of that buffer, and that more data from this buffer will be coming. Now the next receive comes in: cqe->res 0x2010 (8k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) which tells the application that 8k is available where the last completion left off, at 0x1001000. Next completion is: cqe->res 0x5000 (20k bytes received) cqe->flags 0x1 (CQE_F_BUFFER set, buffer ID 0) and the application now knows that 20k of data is available at 0x1003000, which is where the previous receive ended. CQE_F_BUF_MORE isn't set, as no more data is available in this buffer ID. The next completion is then: cqe->res 0x1000 (4k bytes received) cqe->flags 0x10001 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 1) which tells the application that buffer ID 1 is now the current one, hence there's 4k of valid data at 0x2000000. 0x2001000 will be the next receive point for this buffer ID. When a buffer will be reused by future CQE completions, IORING_CQE_BUF_MORE will be set in cqe->flags. This tells the application that the kernel isn't done with the buffer yet, and that it should expect more completions for this buffer ID. Will only be set by provided buffer rings setup with IOU_PBUF_RING INC, as that's the only type of buffer that will see multiple consecutive completions for the same buffer ID. For any other provided buffer type, any completion that passes back a buffer to the application is final. Once a buffer has been fully consumed, the buffer ring head is incremented and the next receive will indicate the next buffer ID in the CQE cflags. On the send side, the application can manage how much data is sent from an existing buffer by setting sqe->len to the desired send length. An application can request incremental consumption by setting IOU_PBUF_RING_INC in the provided buffer ring registration. Outside of that, any provided buffer ring setup and buffer additions is done like before, no changes there. The only change is in how an application may see multiple completions for the same buffer ID, hence needing to know where the next receive will happen. Note that like existing provided buffer rings, this should not be used with IOSQE_ASYNC, as both really require the ring to remain locked over the duration of the buffer selection and the operation completion. It will consume a buffer otherwise regardless of the size of the IO done. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-09 11:20:45 -06:00
io_uring/kbuf: add support for incremental buffer consumption By default, any recv/read operation that uses provided buffers will consume at least 1 buffer fully (and maybe more, in case of bundles). This adds support for incremental consumption, meaning that an application may add large buffers, and each read/recv will just consume the part of the buffer that it needs. For example, let's say an application registers 1MB buffers in a provided buffer ring, for streaming receives. If it gets a short recv, then the full 1MB buffer will be consumed and passed back to the application. With incremental consumption, only the part that was actually used is consumed, and the buffer remains the current one. This means that both the application and the kernel needs to keep track of what the current receive point is. Each recv will still pass back a buffer ID and the size consumed, the only difference is that before the next receive would always be the next buffer in the ring. Now the same buffer ID may return multiple receives, each at an offset into that buffer from where the previous receive left off. Example: Application registers a provided buffer ring, and adds two 32K buffers to the ring. Buffer1 address: 0x1000000 (buffer ID 0) Buffer2 address: 0x2000000 (buffer ID 1) A recv completion is received with the following values: cqe->res 0x1000 (4k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) and the application now knows that 4096b of data is available at 0x1000000, the start of that buffer, and that more data from this buffer will be coming. Now the next receive comes in: cqe->res 0x2010 (8k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) which tells the application that 8k is available where the last completion left off, at 0x1001000. Next completion is: cqe->res 0x5000 (20k bytes received) cqe->flags 0x1 (CQE_F_BUFFER set, buffer ID 0) and the application now knows that 20k of data is available at 0x1003000, which is where the previous receive ended. CQE_F_BUF_MORE isn't set, as no more data is available in this buffer ID. The next completion is then: cqe->res 0x1000 (4k bytes received) cqe->flags 0x10001 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 1) which tells the application that buffer ID 1 is now the current one, hence there's 4k of valid data at 0x2000000. 0x2001000 will be the next receive point for this buffer ID. When a buffer will be reused by future CQE completions, IORING_CQE_BUF_MORE will be set in cqe->flags. This tells the application that the kernel isn't done with the buffer yet, and that it should expect more completions for this buffer ID. Will only be set by provided buffer rings setup with IOU_PBUF_RING INC, as that's the only type of buffer that will see multiple consecutive completions for the same buffer ID. For any other provided buffer type, any completion that passes back a buffer to the application is final. Once a buffer has been fully consumed, the buffer ring head is incremented and the next receive will indicate the next buffer ID in the CQE cflags. On the send side, the application can manage how much data is sent from an existing buffer by setting sqe->len to the desired send length. An application can request incremental consumption by setting IOU_PBUF_RING_INC in the provided buffer ring registration. Outside of that, any provided buffer ring setup and buffer additions is done like before, no changes there. The only change is in how an application may see multiple completions for the same buffer ID, hence needing to know where the next receive will happen. Note that like existing provided buffer rings, this should not be used with IOSQE_ASYNC, as both really require the ring to remain locked over the duration of the buffer selection and the operation completion. It will consume a buffer otherwise regardless of the size of the IO done. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-09 11:20:45 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: export cq overflow status to userspace For those applications which are not willing to use io_uring_enter() to reap and handle cqes, they may completely rely on liburing's io_uring_peek_cqe(), but if cq ring has overflowed, currently because io_uring_peek_cqe() is not aware of this overflow, it won't enter kernel to flush cqes, below test program can reveal this bug: static void test_cq_overflow(struct io_uring *ring) { struct io_uring_cqe *cqe; struct io_uring_sqe *sqe; int issued = 0; int ret = 0; do { sqe = io_uring_get_sqe(ring); if (!sqe) { fprintf(stderr, "get sqe failed\n"); break;; } ret = io_uring_submit(ring); if (ret <= 0) { if (ret != -EBUSY) fprintf(stderr, "sqe submit failed: %d\n", ret); break; } issued++; } while (ret > 0); assert(ret == -EBUSY); printf("issued requests: %d\n", issued); while (issued) { ret = io_uring_peek_cqe(ring, &cqe); if (ret) { if (ret != -EAGAIN) { fprintf(stderr, "peek completion failed: %s\n", strerror(ret)); break; } printf("left requets: %d\n", issued); continue; } io_uring_cqe_seen(ring, cqe); issued--; printf("left requets: %d\n", issued); } } int main(int argc, char *argv[]) { int ret; struct io_uring ring; ret = io_uring_queue_init(16, &ring, 0); if (ret) { fprintf(stderr, "ring setup failed: %d\n", ret); return 1; } test_cq_overflow(&ring); return 0; } To fix this issue, export cq overflow status to userspace by adding new IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 09:15:29 +08:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: add support for registering ring file descriptors Lots of workloads use multiple threads, in which case the file table is shared between them. This makes getting and putting the ring file descriptor for each io_uring_enter(2) system call more expensive, as it involves an atomic get and put for each call. Similarly to how we allow registering normal file descriptors to avoid this overhead, add support for an io_uring_register(2) API that allows to register the ring fds themselves: 1) IORING_REGISTER_RING_FDS - takes an array of io_uring_rsrc_update structs, and registers them with the task. 2) IORING_UNREGISTER_RING_FDS - takes an array of io_uring_src_update structs, and unregisters them. When a ring fd is registered, it is internally represented by an offset. This offset is returned to the application, and the application then uses this offset and sets IORING_ENTER_REGISTERED_RING for the io_uring_enter(2) system call. This works just like using a registered file descriptor, rather than a real one, in an SQE, where IOSQE_FIXED_FILE gets set to tell io_uring that we're using an internal offset/descriptor rather than a real file descriptor. In initial testing, this provides a nice bump in performance for threaded applications in real world cases where the batch count (eg number of requests submitted per io_uring_enter(2) invocation) is low. In a microbenchmark, submitting NOP requests, we see the following increases in performance: Requests per syscall Baseline Registered Increase ---------------------------------------------------------------- 1 ~7030K ~8080K +15% 2 ~13120K ~14800K +13% 4 ~22740K ~25300K +11% Co-developed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-04 08:22:22 -07:00
io_uring: add support for fixed wait regions Generally applications have 1 or a few waits of waiting, yet they pass in a struct io_uring_getevents_arg every time. This needs to get copied and, in turn, the timeout value needs to get copied. Rather than do this for every invocation, allow the application to register a fixed set of wait regions that can simply be indexed when asking the kernel to wait on events. At ring setup time, the application can register a number of these wait regions and initialize region/index 0 upfront: struct io_uring_reg_wait *reg; reg = io_uring_setup_reg_wait(ring, nr_regions, &ret); /* set timeout and mark as set, sigmask/sigmask_sz as needed */ reg->ts.tv_sec = 0; reg->ts.tv_nsec = 100000; reg->flags = IORING_REG_WAIT_TS; where nr_regions >= 1 && nr_regions <= PAGE_SIZE / sizeof(*reg). The above initializes index 0, but 63 other regions can be initialized, if needed. Now, instead of doing: struct __kernel_timespec timeout = { .tv_nsec = 100000, }; io_uring_submit_and_wait_timeout(ring, &cqe, nr, &t, NULL); to wait for events for each submit_and_wait, or just wait, operation, it can just reference the above region at offset 0 and do: io_uring_submit_and_wait_reg(ring, &cqe, nr, 0); to achieve the same goal of waiting 100usec without needing to copy both struct io_uring_getevents_arg (24b) and struct __kernel_timeout (16b) for each invocation. Struct io_uring_reg_wait looks as follows: struct io_uring_reg_wait { struct __kernel_timespec ts; __u32 min_wait_usec; __u32 flags; __u64 sigmask; __u32 sigmask_sz; __u32 pad[3]; __u64 pad2[2]; }; embedding the timeout itself in the region, rather than passing it as a pointer as well. Note that the signal mask is still passed as a pointer, both for compatability reasons, but also because there doesn't seem to be a lot of high frequency waits scenarios that involve setting and resetting the signal mask for each wait. The application is free to modify any region before a wait call, or it can use keep multiple regions with different settings to avoid needing to modify the same one for wait calls. Up to a page size of regions is mapped by default, allowing PAGE_SIZE / 64 available regions for use. The registered region must fit within a page. On a 4kb page size system, that allows for 64 wait regions if a full page is used, as the size of struct io_uring_reg_wait is 64b. The region registered must be aligned to io_uring_reg_wait in size. It's valid to register less than 64 entries. In network performance testing with zero-copy, this reduced the time spent waiting on the TX side from 3.12% to 0.3% and the RX side from 4.4% to 0.3%. Wait regions are fixed for the lifetime of the ring - once registered, they are persistent until the ring is torn down. The regions support minimum wait timeout as well as the regular waits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-22 13:47:00 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
io_uring: add option to skip CQE posting Emitting a CQE is expensive from the kernel perspective. Often, it's also not convenient for the userspace, spends some cycles on processing and just complicates the logic. A similar problems goes for linked requests, where we post an CQE for each request in the link. Introduce a new flags, IOSQE_CQE_SKIP_SUCCESS, trying to help with it. When set and a request completed successfully, it won't generate a CQE. When fails, it produces an CQE, but all following linked requests will be CQE-less, regardless whether they have IOSQE_CQE_SKIP_SUCCESS or not. The notion of "fail" is the same as for link failing-cancellation, where it's opcode dependent, and _usually_ result >= 0 is a success, but not always. Linked timeouts are a bit special. When the requests it's linked to was not attempted to be executed, e.g. failing linked requests, it follows the description above. Otherwise, whether a linked timeout will post a completion or not solely depends on IOSQE_CQE_SKIP_SUCCESS of that linked timeout request. Linked timeout never "fail" during execution, so for them it's unconditional. It's expected for users to not really care about the result of it but rely solely on the result of the master request. Another reason for such a treatment is that it's racy, and the timeout callback may be running awhile the master request posts its completion. use case 1: If one doesn't care about results of some requests, e.g. normal timeouts, just set IOSQE_CQE_SKIP_SUCCESS. Error result will still be posted and need to be handled. use case 2: Set IOSQE_CQE_SKIP_SUCCESS for all requests of a link but the last, and it'll post a completion only for the last one if everything goes right, otherwise there will be one only one CQE for the first failed request. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0220fbe06f7cf99e6fc71b4297bb1cb6c0e89c2c.1636559119.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-10 15:49:32 +00:00
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
io_uring: add support for registering ring file descriptors Lots of workloads use multiple threads, in which case the file table is shared between them. This makes getting and putting the ring file descriptor for each io_uring_enter(2) system call more expensive, as it involves an atomic get and put for each call. Similarly to how we allow registering normal file descriptors to avoid this overhead, add support for an io_uring_register(2) API that allows to register the ring fds themselves: 1) IORING_REGISTER_RING_FDS - takes an array of io_uring_rsrc_update structs, and registers them with the task. 2) IORING_UNREGISTER_RING_FDS - takes an array of io_uring_src_update structs, and unregisters them. When a ring fd is registered, it is internally represented by an offset. This offset is returned to the application, and the application then uses this offset and sets IORING_ENTER_REGISTERED_RING for the io_uring_enter(2) system call. This works just like using a registered file descriptor, rather than a real one, in an SQE, where IOSQE_FIXED_FILE gets set to tell io_uring that we're using an internal offset/descriptor rather than a real file descriptor. In initial testing, this provides a nice bump in performance for threaded applications in real world cases where the batch count (eg number of requests submitted per io_uring_enter(2) invocation) is low. In a microbenchmark, submitting NOP requests, we see the following increases in performance: Requests per syscall Baseline Registered Increase ---------------------------------------------------------------- 1 ~7030K ~8080K +15% 2 ~13120K ~14800K +13% 4 ~22740K ~25300K +11% Co-developed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-04 08:22:22 -07:00
io_uring: add support for ring mapped supplied buffers Provided buffers allow an application to supply io_uring with buffers that can then be grabbed for a read/receive request, when the data source is ready to deliver data. The existing scheme relies on using IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use in real world applications. It's pretty efficient if the application is able to supply back batches of provided buffers when they have been consumed and the application is ready to recycle them, but if fragmentation occurs in the buffer space, it can become difficult to supply enough buffers at the time. This hurts efficiency. Add a register op, IORING_REGISTER_PBUF_RING, which allows an application to setup a shared queue for each buffer group of provided buffers. The application can then supply buffers simply by adding them to this ring, and the kernel can consume then just as easily. The ring shares the head with the application, the tail remains private in the kernel. Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the ring, they must use the mapped ring. Mapped provided buffer rings can co-exist with normal provided buffers, just not within the same group ID. To gauge overhead of the existing scheme and evaluate the mapped ring approach, a simple NOP benchmark was written. It uses a ring of 128 entries, and submits/completes 32 at the time. 'Replenish' is how many buffers are provided back at the time after they have been consumed: Test Replenish NOPs/sec ================================================================ No provided buffers NA ~30M Provided buffers 32 ~16M Provided buffers 1 ~10M Ring buffers 32 ~27M Ring buffers 1 ~27M The ring mapped buffers perform almost as well as not using provided buffers at all, and they don't care if you provided 1 or more back at the same time. This means application can just replenish as they go, rather than need to batch and compact, further reducing overhead in the application. The NOP benchmark above doesn't need to do any compaction, so that overhead isn't even reflected in the above test. Co-developed-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30 14:38:53 -06:00
2022-06-18 10:00:50 -06:00
io_uring/register: add IORING_REGISTER_RESIZE_RINGS Once a ring has been created, the size of the CQ and SQ rings are fixed. Usually this isn't a problem on the SQ ring side, as it merely controls the available number of requests that can be submitted in a single system call, and there's rarely a need to change that. For the CQ ring, it's a different story. For most efficient use of io_uring, it's important that the CQ ring never overflows. This means that applications must size it for the worst case scenario, which can be wasteful. Add IORING_REGISTER_RESIZE_RINGS, which allows an application to resize the existing rings. It takes a struct io_uring_params argument, the same one which is used to setup the ring initially, and resizes rings according to the sizes given. Certain properties are always inherited from the original ring setup, like SQE128/CQE32 and other setup options. The implementation only allows flag associated with how the CQ ring is sized and clamped. Existing unconsumed SQE and CQE entries are copied as part of the process. If either the SQ or CQ resized destination ring cannot hold the entries already present in the source rings, then the operation is failed with -EOVERFLOW. Any register op holds ->uring_lock, which prevents new submissions, and the internal mapping holds the completion lock as well across moving CQ ring state. To prevent races between mmap and ring resizing, add a mutex that's solely used to serialize ring resize and mmap. mmap_sem can't be used here, as as fork'ed process may be doing mmaps on the ring as well. The ctx->resize_lock is held across mmap operations, and the resize will grab it before swapping out the already mapped new data. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-21 13:34:10 -06:00
io_uring: add support for pre-mapped user IO buffers If we have fixed user buffers, we can map them into the kernel when we setup the io_uring. That avoids the need to do get_user_pages() for each and every IO. To utilize this feature, the application must call io_uring_register() after having setup an io_uring instance, passing in IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to an iovec array, and the nr_args should contain how many iovecs the application wishes to map. If successful, these buffers are now mapped into the kernel, eligible for IO. To use these fixed buffers, the application must use the IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len must point to somewhere inside the indexed buffer. The application may register buffers throughout the lifetime of the io_uring instance. It can call io_uring_register() with IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of buffers, and then register a new set. The application need not unregister buffers explicitly before shutting down the io_uring instance. It's perfectly valid to setup a larger buffer, and then sometimes only use parts of it for an IO. As long as the range is within the originally mapped region, it will work just fine. For now, buffers must not be file backed. If file backed buffers are passed in, the registration will fail with -1/EOPNOTSUPP. This restriction may be relaxed in the future. RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat arbitrary 1G per buffer size is also imposed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
io_uring: add support for ring mapped supplied buffers Provided buffers allow an application to supply io_uring with buffers that can then be grabbed for a read/receive request, when the data source is ready to deliver data. The existing scheme relies on using IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use in real world applications. It's pretty efficient if the application is able to supply back batches of provided buffers when they have been consumed and the application is ready to recycle them, but if fragmentation occurs in the buffer space, it can become difficult to supply enough buffers at the time. This hurts efficiency. Add a register op, IORING_REGISTER_PBUF_RING, which allows an application to setup a shared queue for each buffer group of provided buffers. The application can then supply buffers simply by adding them to this ring, and the kernel can consume then just as easily. The ring shares the head with the application, the tail remains private in the kernel. Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the ring, they must use the mapped ring. Mapped provided buffer rings can co-exist with normal provided buffers, just not within the same group ID. To gauge overhead of the existing scheme and evaluate the mapped ring approach, a simple NOP benchmark was written. It uses a ring of 128 entries, and submits/completes 32 at the time. 'Replenish' is how many buffers are provided back at the time after they have been consumed: Test Replenish NOPs/sec ================================================================ No provided buffers NA ~30M Provided buffers 32 ~16M Provided buffers 1 ~10M Ring buffers 32 ~27M Ring buffers 1 ~27M The ring mapped buffers perform almost as well as not using provided buffers at all, and they don't care if you provided 1 or more back at the same time. This means application can just replenish as they go, rather than need to batch and compact, further reducing overhead in the application. The NOP benchmark above doesn't need to do any compaction, so that overhead isn't even reflected in the above test. Co-developed-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30 14:38:53 -06:00
io_uring: add support for ring mapped supplied buffers Provided buffers allow an application to supply io_uring with buffers that can then be grabbed for a read/receive request, when the data source is ready to deliver data. The existing scheme relies on using IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use in real world applications. It's pretty efficient if the application is able to supply back batches of provided buffers when they have been consumed and the application is ready to recycle them, but if fragmentation occurs in the buffer space, it can become difficult to supply enough buffers at the time. This hurts efficiency. Add a register op, IORING_REGISTER_PBUF_RING, which allows an application to setup a shared queue for each buffer group of provided buffers. The application can then supply buffers simply by adding them to this ring, and the kernel can consume then just as easily. The ring shares the head with the application, the tail remains private in the kernel. Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the ring, they must use the mapped ring. Mapped provided buffer rings can co-exist with normal provided buffers, just not within the same group ID. To gauge overhead of the existing scheme and evaluate the mapped ring approach, a simple NOP benchmark was written. It uses a ring of 128 entries, and submits/completes 32 at the time. 'Replenish' is how many buffers are provided back at the time after they have been consumed: Test Replenish NOPs/sec ================================================================ No provided buffers NA ~30M Provided buffers 32 ~16M Provided buffers 1 ~10M Ring buffers 32 ~27M Ring buffers 1 ~27M The ring mapped buffers perform almost as well as not using provided buffers at all, and they don't care if you provided 1 or more back at the same time. This means application can just replenish as they go, rather than need to batch and compact, further reducing overhead in the application. The NOP benchmark above doesn't need to do any compaction, so that overhead isn't even reflected in the above test. Co-developed-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30 14:38:53 -06:00
io_uring/kbuf: add support for incremental buffer consumption By default, any recv/read operation that uses provided buffers will consume at least 1 buffer fully (and maybe more, in case of bundles). This adds support for incremental consumption, meaning that an application may add large buffers, and each read/recv will just consume the part of the buffer that it needs. For example, let's say an application registers 1MB buffers in a provided buffer ring, for streaming receives. If it gets a short recv, then the full 1MB buffer will be consumed and passed back to the application. With incremental consumption, only the part that was actually used is consumed, and the buffer remains the current one. This means that both the application and the kernel needs to keep track of what the current receive point is. Each recv will still pass back a buffer ID and the size consumed, the only difference is that before the next receive would always be the next buffer in the ring. Now the same buffer ID may return multiple receives, each at an offset into that buffer from where the previous receive left off. Example: Application registers a provided buffer ring, and adds two 32K buffers to the ring. Buffer1 address: 0x1000000 (buffer ID 0) Buffer2 address: 0x2000000 (buffer ID 1) A recv completion is received with the following values: cqe->res 0x1000 (4k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) and the application now knows that 4096b of data is available at 0x1000000, the start of that buffer, and that more data from this buffer will be coming. Now the next receive comes in: cqe->res 0x2010 (8k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) which tells the application that 8k is available where the last completion left off, at 0x1001000. Next completion is: cqe->res 0x5000 (20k bytes received) cqe->flags 0x1 (CQE_F_BUFFER set, buffer ID 0) and the application now knows that 20k of data is available at 0x1003000, which is where the previous receive ended. CQE_F_BUF_MORE isn't set, as no more data is available in this buffer ID. The next completion is then: cqe->res 0x1000 (4k bytes received) cqe->flags 0x10001 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 1) which tells the application that buffer ID 1 is now the current one, hence there's 4k of valid data at 0x2000000. 0x2001000 will be the next receive point for this buffer ID. When a buffer will be reused by future CQE completions, IORING_CQE_BUF_MORE will be set in cqe->flags. This tells the application that the kernel isn't done with the buffer yet, and that it should expect more completions for this buffer ID. Will only be set by provided buffer rings setup with IOU_PBUF_RING INC, as that's the only type of buffer that will see multiple consecutive completions for the same buffer ID. For any other provided buffer type, any completion that passes back a buffer to the application is final. Once a buffer has been fully consumed, the buffer ring head is incremented and the next receive will indicate the next buffer ID in the CQE cflags. On the send side, the application can manage how much data is sent from an existing buffer by setting sqe->len to the desired send length. An application can request incremental consumption by setting IOU_PBUF_RING_INC in the provided buffer ring registration. Outside of that, any provided buffer ring setup and buffer additions is done like before, no changes there. The only change is in how an application may see multiple completions for the same buffer ID, hence needing to know where the next receive will happen. Note that like existing provided buffer rings, this should not be used with IOSQE_ASYNC, as both really require the ring to remain locked over the duration of the buffer selection and the operation completion. It will consume a buffer otherwise regardless of the size of the IO done. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-09 11:20:45 -06:00
io_uring/kbuf: add support for incremental buffer consumption By default, any recv/read operation that uses provided buffers will consume at least 1 buffer fully (and maybe more, in case of bundles). This adds support for incremental consumption, meaning that an application may add large buffers, and each read/recv will just consume the part of the buffer that it needs. For example, let's say an application registers 1MB buffers in a provided buffer ring, for streaming receives. If it gets a short recv, then the full 1MB buffer will be consumed and passed back to the application. With incremental consumption, only the part that was actually used is consumed, and the buffer remains the current one. This means that both the application and the kernel needs to keep track of what the current receive point is. Each recv will still pass back a buffer ID and the size consumed, the only difference is that before the next receive would always be the next buffer in the ring. Now the same buffer ID may return multiple receives, each at an offset into that buffer from where the previous receive left off. Example: Application registers a provided buffer ring, and adds two 32K buffers to the ring. Buffer1 address: 0x1000000 (buffer ID 0) Buffer2 address: 0x2000000 (buffer ID 1) A recv completion is received with the following values: cqe->res 0x1000 (4k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) and the application now knows that 4096b of data is available at 0x1000000, the start of that buffer, and that more data from this buffer will be coming. Now the next receive comes in: cqe->res 0x2010 (8k bytes received) cqe->flags 0x11 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 0) which tells the application that 8k is available where the last completion left off, at 0x1001000. Next completion is: cqe->res 0x5000 (20k bytes received) cqe->flags 0x1 (CQE_F_BUFFER set, buffer ID 0) and the application now knows that 20k of data is available at 0x1003000, which is where the previous receive ended. CQE_F_BUF_MORE isn't set, as no more data is available in this buffer ID. The next completion is then: cqe->res 0x1000 (4k bytes received) cqe->flags 0x10001 (CQE_F_BUFFER|CQE_F_BUF_MORE set, buffer ID 1) which tells the application that buffer ID 1 is now the current one, hence there's 4k of valid data at 0x2000000. 0x2001000 will be the next receive point for this buffer ID. When a buffer will be reused by future CQE completions, IORING_CQE_BUF_MORE will be set in cqe->flags. This tells the application that the kernel isn't done with the buffer yet, and that it should expect more completions for this buffer ID. Will only be set by provided buffer rings setup with IOU_PBUF_RING INC, as that's the only type of buffer that will see multiple consecutive completions for the same buffer ID. For any other provided buffer type, any completion that passes back a buffer to the application is final. Once a buffer has been fully consumed, the buffer ring head is incremented and the next receive will indicate the next buffer ID in the CQE cflags. On the send side, the application can manage how much data is sent from an existing buffer by setting sqe->len to the desired send length. An application can request incremental consumption by setting IOU_PBUF_RING_INC in the provided buffer ring registration. Outside of that, any provided buffer ring setup and buffer additions is done like before, no changes there. The only change is in how an application may see multiple completions for the same buffer ID, hence needing to know where the next receive will happen. Note that like existing provided buffer rings, this should not be used with IOSQE_ASYNC, as both really require the ring to remain locked over the duration of the buffer selection and the operation completion. It will consume a buffer otherwise regardless of the size of the IO done. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-09 11:20:45 -06:00
io_uring: add support for ring mapped supplied buffers Provided buffers allow an application to supply io_uring with buffers that can then be grabbed for a read/receive request, when the data source is ready to deliver data. The existing scheme relies on using IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use in real world applications. It's pretty efficient if the application is able to supply back batches of provided buffers when they have been consumed and the application is ready to recycle them, but if fragmentation occurs in the buffer space, it can become difficult to supply enough buffers at the time. This hurts efficiency. Add a register op, IORING_REGISTER_PBUF_RING, which allows an application to setup a shared queue for each buffer group of provided buffers. The application can then supply buffers simply by adding them to this ring, and the kernel can consume then just as easily. The ring shares the head with the application, the tail remains private in the kernel. Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the ring, they must use the mapped ring. Mapped provided buffer rings can co-exist with normal provided buffers, just not within the same group ID. To gauge overhead of the existing scheme and evaluate the mapped ring approach, a simple NOP benchmark was written. It uses a ring of 128 entries, and submits/completes 32 at the time. 'Replenish' is how many buffers are provided back at the time after they have been consumed: Test Replenish NOPs/sec ================================================================ No provided buffers NA ~30M Provided buffers 32 ~16M Provided buffers 1 ~10M Ring buffers 32 ~27M Ring buffers 1 ~27M The ring mapped buffers perform almost as well as not using provided buffers at all, and they don't care if you provided 1 or more back at the same time. This means application can just replenish as they go, rather than need to batch and compact, further reducing overhead in the application. The NOP benchmark above doesn't need to do any compaction, so that overhead isn't even reflected in the above test. Co-developed-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30 14:38:53 -06:00
io_uring: add support for ring mapped supplied buffers Provided buffers allow an application to supply io_uring with buffers that can then be grabbed for a read/receive request, when the data source is ready to deliver data. The existing scheme relies on using IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use in real world applications. It's pretty efficient if the application is able to supply back batches of provided buffers when they have been consumed and the application is ready to recycle them, but if fragmentation occurs in the buffer space, it can become difficult to supply enough buffers at the time. This hurts efficiency. Add a register op, IORING_REGISTER_PBUF_RING, which allows an application to setup a shared queue for each buffer group of provided buffers. The application can then supply buffers simply by adding them to this ring, and the kernel can consume then just as easily. The ring shares the head with the application, the tail remains private in the kernel. Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the ring, they must use the mapped ring. Mapped provided buffer rings can co-exist with normal provided buffers, just not within the same group ID. To gauge overhead of the existing scheme and evaluate the mapped ring approach, a simple NOP benchmark was written. It uses a ring of 128 entries, and submits/completes 32 at the time. 'Replenish' is how many buffers are provided back at the time after they have been consumed: Test Replenish NOPs/sec ================================================================ No provided buffers NA ~30M Provided buffers 32 ~16M Provided buffers 1 ~10M Ring buffers 32 ~27M Ring buffers 1 ~27M The ring mapped buffers perform almost as well as not using provided buffers at all, and they don't care if you provided 1 or more back at the same time. This means application can just replenish as they go, rather than need to batch and compact, further reducing overhead in the application. The NOP benchmark above doesn't need to do any compaction, so that overhead isn't even reflected in the above test. Co-developed-by: Dylan Yudaken <dylany@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30 14:38:53 -06:00
io_uring: add support for fixed wait regions Generally applications have 1 or a few waits of waiting, yet they pass in a struct io_uring_getevents_arg every time. This needs to get copied and, in turn, the timeout value needs to get copied. Rather than do this for every invocation, allow the application to register a fixed set of wait regions that can simply be indexed when asking the kernel to wait on events. At ring setup time, the application can register a number of these wait regions and initialize region/index 0 upfront: struct io_uring_reg_wait *reg; reg = io_uring_setup_reg_wait(ring, nr_regions, &ret); /* set timeout and mark as set, sigmask/sigmask_sz as needed */ reg->ts.tv_sec = 0; reg->ts.tv_nsec = 100000; reg->flags = IORING_REG_WAIT_TS; where nr_regions >= 1 && nr_regions <= PAGE_SIZE / sizeof(*reg). The above initializes index 0, but 63 other regions can be initialized, if needed. Now, instead of doing: struct __kernel_timespec timeout = { .tv_nsec = 100000, }; io_uring_submit_and_wait_timeout(ring, &cqe, nr, &t, NULL); to wait for events for each submit_and_wait, or just wait, operation, it can just reference the above region at offset 0 and do: io_uring_submit_and_wait_reg(ring, &cqe, nr, 0); to achieve the same goal of waiting 100usec without needing to copy both struct io_uring_getevents_arg (24b) and struct __kernel_timeout (16b) for each invocation. Struct io_uring_reg_wait looks as follows: struct io_uring_reg_wait { struct __kernel_timespec ts; __u32 min_wait_usec; __u32 flags; __u64 sigmask; __u32 sigmask_sz; __u32 pad[3]; __u64 pad2[2]; }; embedding the timeout itself in the region, rather than passing it as a pointer as well. Note that the signal mask is still passed as a pointer, both for compatability reasons, but also because there doesn't seem to be a lot of high frequency waits scenarios that involve setting and resetting the signal mask for each wait. The application is free to modify any region before a wait call, or it can use keep multiple regions with different settings to avoid needing to modify the same one for wait calls. Up to a page size of regions is mapped by default, allowing PAGE_SIZE / 64 available regions for use. The registered region must fit within a page. On a 4kb page size system, that allows for 64 wait regions if a full page is used, as the size of struct io_uring_reg_wait is 64b. The region registered must be aligned to io_uring_reg_wait in size. It's valid to register less than 64 entries. In network performance testing with zero-copy, this reduced the time spent waiting on the TX side from 3.12% to 0.3% and the RX side from 4.4% to 0.3%. Wait regions are fixed for the lifetime of the ring - once registered, they are persistent until the ring is torn down. The regions support minimum wait timeout as well as the regular waits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-22 13:47:00 -06:00
2022-06-18 10:00:50 -06:00
2022-06-18 10:00:50 -06:00
Add io_uring IO interface The submission queue (SQ) and completion queue (CQ) rings are shared between the application and the kernel. This eliminates the need to copy data back and forth to submit and complete IO. IO submissions use the io_uring_sqe data structure, and completions are generated in the form of io_uring_cqe data structures. The SQ ring is an index into the io_uring_sqe array, which makes it possible to submit a batch of IOs without them being contiguous in the ring. The CQ ring is always contiguous, as completion events are inherently unordered, and hence any io_uring_cqe entry can point back to an arbitrary submission. Two new system calls are added for this: io_uring_setup(entries, params) Sets up an io_uring instance for doing async IO. On success, returns a file descriptor that the application can mmap to gain access to the SQ ring, CQ ring, and io_uring_sqes. io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize) Initiates IO against the rings mapped to this fd, or waits for them to complete, or both. The behavior is controlled by the parameters passed in. If 'to_submit' is non-zero, then we'll try and submit new IO. If IORING_ENTER_GETEVENTS is set, the kernel will wait for 'min_complete' events, if they aren't already available. It's valid to set IORING_ENTER_GETEVENTS and 'min_complete' == 0 at the same time, this allows the kernel to return already completed events without waiting for them. This is useful only for polling, as for IRQ driven IO, the application can just check the CQ ring without entering the kernel. With this setup, it's possible to do async IO with a single system call. Future developments will enable polled IO with this interface, and polled submission as well. The latter will enable an application to do IO without doing ANY system calls at all. For IRQ driven IO, an application only needs to enter the kernel for completions if it wants to wait for them to occur. Each io_uring is backed by a workqueue, to support buffered async IO as well. We will only punt to an async context if the command would need to wait for IO on the device side. Any data that can be accessed directly in the page cache is done inline. This avoids the slowness issue of usual threadpools, since cached data is accessed as quickly as a sync interface. Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00