linux/arch/x86/Kconfig

3184 lines
105 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
kconfig: reference environment variables directly and remove 'option env=' To get access to environment variables, Kconfig needs to define a symbol using "option env=" syntax. It is tedious to add a symbol entry for each environment variable given that we need to define much more such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability in Kconfig. Adding '$' for symbol references is grammatically inconsistent. Looking at the code, the symbols prefixed with 'S' are expanded by: - conf_expand_value() This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list' - sym_expand_string_value() This is used to expand strings in 'source' and 'mainmenu' All of them are fixed values independent of user configuration. So, they can be changed into the direct expansion instead of symbols. This change makes the code much cleaner. The bounce symbols 'SRCARCH', 'ARCH', 'SUBARCH', 'KERNELVERSION' are gone. sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE' should be replaced with an environment variable. ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced without '$' prefix. The new syntax is addicted by Make. The variable reference needs parentheses, like $(FOO), but you can omit them for single-letter variables, like $F. Yet, in Makefiles, people tend to use the parenthetical form for consistency / clarification. At this moment, only the environment variable is supported, but I will extend the concept of 'variable' later on. The variables are expanded in the lexer so we can simplify the token handling on the parser side. For example, the following code works. [Example code] config MY_TOOLCHAIN_LIST string default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)" [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28 18:21:40 +09:00
mseal sysmap: enable x86-64 Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on x86-64, covering the vdso, vvar, vvar_vclock. Production release testing passes on Android and Chrome OS. Link: https://lkml.kernel.org/r/20250305021711.3867874-4-jeffxu@google.com Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Kees Cook <kees@kernel.org> Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org> Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Berg <benjamin@sipsolutions.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Elliot Hughes <enh@google.com> Cc: Florian Faineli <f.fainelli@gmail.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Linus Waleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport <mike.rapoport@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Röttger <sroettger@google.com> Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-05 02:17:07 +00:00
mm/x86: support large pfn mappings Helpers to install and detect special pmd/pud entries. In short, bit 9 on x86 is not used for pmd/pud, so we can directly define them the same as the pte level. One note is that it's also used in _PAGE_BIT_CPA_TEST but that is only used in the debug test, and shouldn't conflict in this case. One note is that pxx_set|clear_flags() for pmd/pud will need to be moved upper so that they can be referenced by the new special bit helpers. There's no change in the code that was moved. Link: https://lkml.kernel.org/r/20240826204353.2228736-18-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-26 16:43:51 -04:00
ACPI: Move ACPI_HOTPLUG_CPU to be disabled on arm64 and riscv Neither arm64 nor riscv support physical hotadd of CPUs that were not present at boot. For arm64 much of the platform description is in static tables which do not have update methods. arm64 does support HOTPLUG_CPU, which is backed by a firmware interface to turn CPUs on and off. acpi_processor_hotadd_init() and acpi_processor_remove() are for adding and removing CPUs that were not present at boot. arm64 systems that do this are not supported as there is currently insufficient information in the platform description. (e.g. did the GICR get removed too?) arm64 currently relies on the MADT enabled flag check in map_gicc_mpidr() to prevent CPUs that were not described as present at boot from being added to the system. Similarly, riscv relies on the same check in map_rintc_hartid(). Both architectures also rely on the weak 'always fails' definitions of acpi_map_cpu() and arch_register_cpu(). Subsequent changes will redefine ACPI_HOTPLUG_CPU as making possible CPUs present. Neither arm64 nor riscv support this. Disable ACPI_HOTPLUG_CPU for arm64 and riscv by removing 'default y' and selecting it on the other three ACPI architectures. This allows the weak definitions of some symbols to be removed. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R31-00Csyt-Jq@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-21 13:44:15 +00:00
cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. Fixes: f337a6a21e2f ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n") Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
2024-04-19 17:05:54 -07:00
mm: drop redundant ARCH_ENABLE_[HUGEPAGE|THP]_MIGRATION ARCH_ENABLE_[HUGEPAGE|THP]_MIGRATION configs have duplicate definitions on platforms that subscribe them. Drop these reduntant definitions and instead just select them appropriately. [akpm@linux-foundation.org: s/x86_64/X86_64/, per Oscar] Link: https://lkml.kernel.org/r/1617259448-22529-5-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-04 18:38:21 -07:00
mm: drop redundant ARCH_ENABLE_[HUGEPAGE|THP]_MIGRATION ARCH_ENABLE_[HUGEPAGE|THP]_MIGRATION configs have duplicate definitions on platforms that subscribe them. Drop these reduntant definitions and instead just select them appropriately. [akpm@linux-foundation.org: s/x86_64/X86_64/, per Oscar] Link: https://lkml.kernel.org/r/1617259448-22529-5-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-04 18:38:21 -07:00
mm: generalize ARCH_HAS_CACHE_LINE_SIZE Patch series "mm: some config cleanups", v2. This series contains config cleanup patches which reduces code duplication across platforms and also improves maintainability. There is no functional change intended with this series. This patch (of 6): ARCH_HAS_CACHE_LINE_SIZE config has duplicate definitions on platforms that subscribe it. Instead, just make it a generic option which can be selected on applicable platforms. This change reduces code duplication and makes it cleaner. Link: https://lkml.kernel.org/r/1617259448-22529-1-git-send-email-anshuman.khandual@arm.com Link: https://lkml.kernel.org/r/1617259448-22529-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-04 18:38:09 -07:00
memregion: Add cpu_cache_invalidate_memregion() interface With CXL security features, and CXL dynamic provisioning, global CPU cache flushing nvdimm requirements are no longer specific to that subsystem, even beyond the scope of security_ops. CXL will need such semantics for features not necessarily limited to persistent memory. The functionality this is enabling is to be able to instantaneously secure erase potentially terabytes of memory at once and the kernel needs to be sure that none of the data from before the erase is still present in the cache. It is also used when unlocking a memory device where speculative reads and firmware accesses could have cached poison from before the device was unlocked. Lastly this facility is used when mapping new devices, or new capacity into an established physical address range. I.e. when the driver switches DeviceA mapping AddressX to DeviceB mapping AddressX then any cached data from DeviceA:AddressX needs to be invalidated. This capability is typically only used once per-boot (for unlock), or once per bare metal provisioning event (secure erase), like when handing off the system to another tenant or decommissioning a device. It may also be used for dynamic CXL region provisioning. Users must first call cpu_cache_has_invalidate_memregion() to know whether this functionality is available on the architecture. On x86 this respects the constraints of when wbinvd() is tolerable. It is already the case that wbinvd() is problematic to allow in VMs due its global performance impact and KVM, for example, has been known to just trap and ignore the call. With confidential computing guest execution of wbinvd() may even trigger an exception. Given guests should not be messing with the bare metal address map via CXL configuration changes cpu_cache_has_invalidate_memregion() returns false in VMs. While this global cache invalidation facility, is exported to modules, since NVDIMM and CXL support can be built as a module, it is not for general use. The intent is that this facility is not available outside of specific "device-memory" use cases. To make that expectation as clear as possible the API is scoped to a new "DEVMEM" module namespace that only the NVDIMM and CXL subsystems are expected to import. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-10-28 11:34:04 -07:00
usercopy: Check valid lifetime via stack depth One of the things that CONFIG_HARDENED_USERCOPY sanity-checks is whether an object that is about to be copied to/from userspace is overlapping the stack at all. If it is, it performs a number of inexpensive bounds checks. One of the finer-grained checks is whether an object crosses stack frames within the stack region. Doing this on x86 with CONFIG_FRAME_POINTER was cheap/easy. Doing it with ORC was deemed too heavy, and was left out (a while ago), leaving the courser whole-stack check. The LKDTM tests USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM try to exercise these cross-frame cases to validate the defense is working. They have been failing ever since ORC was added (which was expected). While Muhammad was investigating various LKDTM failures[1], he asked me for additional details on them, and I realized that when exact stack frame boundary checking is not available (i.e. everything except x86 with FRAME_POINTER), it could check if a stack object is at least "current depth valid", in the sense that any object within the stack region but not between start-of-stack and current_stack_pointer should be considered unavailable (i.e. its lifetime is from a call no longer present on the stack). Introduce ARCH_HAS_CURRENT_STACK_POINTER to track which architectures have actually implemented the common global register alias. Additionally report usercopy bounds checking failures with an offset from current_stack_pointer, which may assist with diagnosing failures. The LKDTM USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM tests (once slightly adjusted in a separate patch) pass again with this fixed. [1] https://github.com/kernelci/kernelci-project/issues/84 Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Kees Cook <keescook@chromium.org> --- v1: https://lore.kernel.org/lkml/20220216201449.2087956-1-keescook@chromium.org v2: https://lore.kernel.org/lkml/20220224060342.1855457-1-keescook@chromium.org v3: https://lore.kernel.org/lkml/20220225173345.3358109-1-keescook@chromium.org v4: - improve commit log (akpm)
2022-02-16 12:05:28 -08:00
mm/debug: add tests validating architecture page table helpers This adds tests which will validate architecture page table helpers and other accessors in their compliance with expected generic MM semantics. This will help various architectures in validating changes to existing page table helpers or addition of new ones. This test covers basic page table entry transformations including but not limited to old, young, dirty, clean, write, write protect etc at various level along with populating intermediate entries with next page table page and validating them. Test page table pages are allocated from system memory with required size and alignments. The mapped pfns at page table levels are derived from a real pfn representing a valid kernel text symbol. This test gets called via late_initcall(). This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected. Any architecture, which is willing to subscribe this test will need to select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64, x86, s390 and powerpc platforms where the test is known to build and run successfully Going forward, other architectures too can subscribe the test after fixing any build or runtime problems with their page table helpers. Folks interested in making sure that a given platform's page table helpers conform to expected generic MM semantics should enable the above config which will just trigger this test during boot. Any non conformity here will be reported as an warning which would need to be fixed. This test will help catch any changes to the agreed upon semantics expected from generic MM and enable platforms to accommodate it thereafter. [anshuman.khandual@arm.com: v17] Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com [anshuman.khandual@arm.com: v18] Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32] Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 16:47:15 -07:00
kgdb: Delay "kgdbwait" to dbg_late_init() by default Using kgdb requires at least some level of architecture-level initialization. If nothing else, it relies on the architecture to pass breakpoints / crashes onto kgdb. On some architectures this all works super early, specifically it starts working at some point in time before Linux parses early_params's. On other architectures it doesn't. A survey of a few platforms: a) x86: Presumably it all works early since "ekgdboc" is documented to work here. b) arm64: Catching crashes works; with a simple patch breakpoints can also be made to work. c) arm: Nothing in kgdb works until paging_init() -> devicemaps_init() -> early_trap_init() Let's be conservative and, by default, process "kgdbwait" (which tells the kernel to drop into the debugger ASAP at boot) a bit later at dbg_late_init() time. If an architecture has tested it and wants to re-enable super early debugging, they can select the ARCH_HAS_EARLY_DEBUG KConfig option. We'll do this for x86 to start. It should be noted that dbg_late_init() is still called quite early in the system. Note that this patch doesn't affect when kgdb runs its init. If kgdb is set to initialize early it will still initialize when parsing early_param's. This patch _only_ inhibits the initial breakpoint from "kgdbwait". This means: * Without any extra patches arm64 platforms will at least catch crashes after kgdb inits. * arm platforms will catch crashes (and could handle a hardcoded kgdb_breakpoint()) any time after early_trap_init() runs, even before dbg_late_init(). Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200507130644.v4.4.I3113aea1b08d8ce36dc3720209392ae8b815201b@changeid Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-05-07 13:08:42 -07:00
include/linux/string.h: add the option of fortified string.h functions This adds support for compiling with a rough equivalent to the glibc _FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer overflow checks for string.h functions when the compiler determines the size of the source or destination buffer at compile-time. Unlike glibc, it covers buffer reads in addition to writes. GNU C __builtin_*_chk intrinsics are avoided because they would force a much more complex implementation. They aren't designed to detect read overflows and offer no real benefit when using an implementation based on inline checks. Inline checks don't add up to much code size and allow full use of the regular string intrinsics while avoiding the need for a bunch of _chk functions and per-arch assembly to avoid wrapper overhead. This detects various overflows at compile-time in various drivers and some non-x86 core kernel code. There will likely be issues caught in regular use at runtime too. Future improvements left out of initial implementation for simplicity, as it's all quite optional and can be done incrementally: * Some of the fortified string functions (strncpy, strcat), don't yet place a limit on reads from the source based on __builtin_object_size of the source buffer. * Extending coverage to more string functions like strlcat. * It should be possible to optionally use __builtin_object_size(x, 1) for some functions (C strings) to detect intra-object overflows (like glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative approach to avoid likely compatibility issues. * The compile-time checks should be made available via a separate config option which can be enabled by default (or always enabled) once enough time has passed to get the issues it catches fixed. Kees said: "This is great to have. While it was out-of-tree code, it would have blocked at least CVE-2016-3858 from being exploitable (improper size argument to strlcpy()). I've sent a number of fixes for out-of-bounds-reads that this detected upstream already" [arnd@arndb.de: x86: fix fortified memcpy] Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de [keescook@chromium.org: avoid panic() in favor of BUG()] Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast [keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help] Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org Signed-off-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 14:36:10 -07:00
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR Until recent versions of GCC and Clang, it was not possible to disable KCOV instrumentation via a function attribute. The relevant function attribute was introduced in 540540d06e9d9 ("kcov: add __no_sanitize_coverage to fix noinstr for all architectures"). x86 was the first architecture to want a working noinstr, and at the time no compiler support for the attribute existed yet. Therefore, commit 0f1441b44e823 ("objtool: Fix noinstr vs KCOV") introduced the ability to NOP __sanitizer_cov_*() calls in .noinstr.text. However, this doesn't work for other architectures like arm64 and s390 that want a working noinstr per ARCH_WANTS_NO_INSTR. At the time of 0f1441b44e823, we didn't yet have ARCH_WANTS_NO_INSTR, but now we can move the Kconfig dependency checks to the generic KCOV option. KCOV will be available if: - architecture does not care about noinstr, OR - we have objtool support (like on x86), OR - GCC is 12.0 or newer, OR - Clang is 13.0 or newer. Link: https://lkml.kernel.org/r/20211201152604.3984495-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19 18:10:31 -08:00
membarrier/x86: Provide core serializing command There are two places where core serialization is needed by membarrier: 1) When returning from the membarrier IPI, 2) After scheduler updates curr to a thread with a different mm, before going back to user-space, since the curr->mm is used by membarrier to check whether it needs to send an IPI to that CPU. x86-32 uses IRET as return from interrupt, and both IRET and SYSEXIT to go back to user-space. The IRET instruction is core serializing, but not SYSEXIT. x86-64 uses IRET as return from interrupt, which takes care of the IPI. However, it can return to user-space through either SYSRETL (compat code), SYSRETQ, or IRET. Given that SYSRET{L,Q} is not core serializing, we rely instead on write_cr3() performed by switch_mm() to provide core serialization after changing the current mm, and deal with the special case of kthread -> uthread (temporarily keeping current mm into active_mm) by adding a sync_core() in that specific case. Use the new sync_core_before_usermode() to guarantee this. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-10-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-29 15:20:18 -05:00
bpf: Restrict bpf_probe_read{, str}() only to archs where they work Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs with overlapping address ranges, we should really take the next step to disable them from BPF use there. To generally fix the situation, we've recently added new helper variants bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str(). For details on them, see 6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user,kernel}_str helpers"). Given bpf_probe_read{,str}() have been around for ~5 years by now, there are plenty of users at least on x86 still relying on them today, so we cannot remove them entirely w/o breaking the BPF tracing ecosystem. However, their use should be restricted to archs with non-overlapping address ranges where they are working in their current form. Therefore, move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and have x86, arm64, arm select it (other archs supporting it can follow-up on it as well). For the remaining archs, they can workaround easily by relying on the feature probe from bpftool which spills out defines that can be used out of BPF C code to implement the drop-in replacement for old/new kernels via: bpftool feature probe macro Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net
2020-05-15 12:11:16 +02:00
mm: introduce ARCH_HAS_PTE_SPECIAL Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:06:08 -07:00
mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Some architectures support the accessed bit in non-leaf PMD entries, e.g., x86 sets the accessed bit in a non-leaf PMD entry when using it as part of linear address translation [1]. Page table walkers that clear the accessed bit may use this capability to reduce their search space. Note that: 1. Although an inline function is preferable, this capability is added as a configuration option for consistency with the existing macros. 2. Due to the little interest in other varieties, this capability was only tested on Intel and AMD CPUs. Thanks to the following developers for their efforts [2][3]. Randy Dunlap <rdunlap@infradead.org> Stephen Rothwell <sfr@canb.auug.org.au> [1]: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3 (June 2021), section 4.8 [2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/ [3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/ Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 01:59:59 -06:00
x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations The pmem driver has a need to transfer data with a persistent memory destination and be able to rely on the fact that the destination writes are not cached. It is sufficient for the writes to be flushed to a cpu-store-buffer (non-temporal / "movnt" in x86 terms), as we expect userspace to call fsync() to ensure data-writes have reached a power-fail-safe zone in the platform. The fsync() triggers a REQ_FUA or REQ_FLUSH to the pmem driver which will turn around and fence previous writes with an "sfence". Implement a __copy_from_user_inatomic_flushcache, memcpy_page_flushcache, and memcpy_flushcache, that guarantee that the destination buffer is not dirty in the cpu cache on completion. The new copy_from_iter_flushcache and sub-routines will be used to replace the "pmem api" (include/linux/pmem.h + arch/x86/include/asm/pmem.h). The availability of copy_from_iter_flushcache() and memcpy_flushcache() are gated by the CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE config symbol, and fallback to copy_from_iter_nocache() and plain memcpy() otherwise. This is meant to satisfy the concern from Linus that if a driver wants to do something beyond the normal nocache semantics it should be something private to that driver [1], and Al's concern that anything uaccess related belongs with the rest of the uaccess code [2]. The first consumer of this interface is a new 'copy_from_iter' dax operation so that pmem can inject cache maintenance operations without imposing this overhead on other dax-capable drivers. [1]: https://lists.01.org/pipermail/linux-nvdimm/2017-January/008364.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2017-April/009942.html Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-29 12:22:50 -07:00
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}() In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-05 20:40:16 -07:00
x86/elf: Add a new FPU buffer layout info to x86 core files Add a new .note section containing type, size, offset and flags of every xfeature that is present. This information will be used by debuggers to understand the XSAVE layout of the machine where the core file has been dumped, and to read XSAVE registers, especially during cross-platform debugging. The XSAVE layouts of modern AMD and Intel CPUs differ, especially since Memory Protection Keys and the AVX-512 features have been inculcated into the AMD CPUs. Since AMD never adopted (and hence never left room in the XSAVE layout for) the Intel MPX feature, tools like GDB had assumed a fixed XSAVE layout matching that of Intel (based on the XCR0 mask). Hence, core dumps from AMD CPUs didn't match the known size for the XCR0 mask. This resulted in GDB and other tools not being able to access the values of the AVX-512 and PKRU registers on AMD CPUs. To solve this, an interim solution has been accepted into GDB, and is already a part of GDB 14, see https://sourceware.org/pipermail/gdb-patches/2023-March/198081.html. But it depends on heuristics based on the total XSAVE register set size and the XCR0 mask to infer the layouts of the various register blocks for core dumps, and hence, is not a foolproof mechanism to determine the layout of the XSAVE area. Therefore, add a new core dump note in order to allow GDB/LLDB and other relevant tools to determine the layout of the XSAVE area of the machine where the corefile was dumped. The new core dump note (which is being proposed as a per-process .note section), NT_X86_XSAVE_LAYOUT (0x205) contains an array of structures. Each structure describes an individual extended feature containing offset, size and flags in this format: struct x86_xfeat_component { u32 type; u32 size; u32 offset; u32 flags; }; and in an independent manner, allowing for future extensions without depending on hw arch specifics like CPUID etc. [ bp: Massage commit message, zap trailing whitespace. ] Co-developed-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Jini Susan George <jinisusan.george@amd.com> Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Vignesh Balasubramanian <vigbalas@amd.com> Link: https://lore.kernel.org/r/20240725161017.112111-2-vigbalas@amd.com
2024-07-25 21:40:18 +05:30
x86/stacktrace: Use common infrastructure Replace the stack_trace_save*() functions with the new arch_stack_walk() interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linux-arch@vger.kernel.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/20190425094803.816485461@linutronix.de
2019-04-25 11:45:22 +02:00
arch, mm: restore dependency of __kernel_map_pages() on DEBUG_PAGEALLOC The design of DEBUG_PAGEALLOC presumes that __kernel_map_pages() must never fail. With this assumption is wouldn't be safe to allow general usage of this function. Moreover, some architectures that implement __kernel_map_pages() have this function guarded by #ifdef DEBUG_PAGEALLOC and some refuse to map/unmap pages when page allocation debugging is disabled at runtime. As all the users of __kernel_map_pages() were converted to use debug_pagealloc_map_pages() it is safe to make it available only when DEBUG_PAGEALLOC is set. Link: https://lkml.kernel.org/r/20201109192128.960-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Len Brown <len.brown@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14 19:10:30 -08:00
kbuild: Add AutoFDO support for Clang build Add the build support for using Clang's AutoFDO. Building the kernel with AutoFDO does not reduce the optimization level from the compiler. AutoFDO uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. Experiments showed that the kernel can improve up to 10% in latency. The support requires a Clang compiler after LLVM 17. This submission is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1, and BRBE on ARM 1 is part of planned future work. Here is an example workflow for AutoFDO kernel: 1) Build the kernel on the host machine with LLVM enabled, for example, $ make menuconfig LLVM=1 Turn on AutoFDO build config: CONFIG_AUTOFDO_CLANG=y With a configuration that has LLVM enabled, use the following command: scripts/config -e AUTOFDO_CLANG After getting the config, build with $ make LLVM=1 2) Install the kernel on the test machine. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 For Zen3: $ cat proc/cpuinfo | grep " brs" For Zen4: $ cat proc/cpuinfo | grep amd_lbr_v2 $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) To generate an AutoFDO profile, two offline tools are available: create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part of the AutoFDO project and can be found on GitHub (https://github.com/google/autofdo), version v0.30.1 or later. The llvm_profgen tool is included in the LLVM compiler itself. It's important to note that the version of llvm_profgen doesn't need to match the version of Clang. It needs to be the LLVM 19 release or later, or from the LLVM trunk. $ llvm-profgen --kernel --binary=<vmlinux> --perfdata=<perf_file> \ -o <profile_file> or $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=extbinary --out=<profile_file> Note that multiple AutoFDO profile files can be merged into one via: $ llvm-profdata merge -o <profile_file> <profile_1> ... <profile_n> 6) Rebuild the kernel using the AutoFDO profile file with the same config as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled): $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Yabin Cui <yabinc@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Tested-by: Peter Jung <ptr1337@cachyos.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-11-02 10:51:08 -07:00
kbuild: Add Propeller configuration for kernel build Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> “<autofdo_profile>” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=propeller --propeller_output_module_name \ --out=<propeller_profile_prefix>_cc_profile.txt \ --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "<propeller_profile_prefix>_cc_profile.txt" and "<propeller_profile_prefix>_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \ CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-11-02 10:51:14 -07:00
bpf, x86, arm64: Enable jit by default when not built as always-on After Spectre 2 fix via 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") most major distros use BPF_JIT_ALWAYS_ON configuration these days which compiles out the BPF interpreter entirely and always enables the JIT. Also given recent fix in e1608f3fa857 ("bpf: Avoid setting bpf insns pages read-only when prog is jited"), we additionally avoid fragmenting the direct map for the BPF insns pages sitting in the general data heap since they are not used during execution. Latter is only needed when run through the interpreter. Since both x86 and arm64 JITs have seen a lot of exposure over the years, are generally most up to date and maintained, there is more downside in !BPF_JIT_ALWAYS_ON configurations to have the interpreter enabled by default rather than the JIT. Add a ARCH_WANT_DEFAULT_BPF_JIT config which archs can use to set the bpf_jit_{enable,kallsyms} to 1. Back in the days the bpf_jit_kallsyms knob was set to 0 by default since major distros still had /proc/kallsyms addresses exposed to unprivileged user space which is not the case anymore. Hence both knobs are set via BPF_JIT_DEFAULT_ON which is set to 'y' in case of BPF_JIT_ALWAYS_ON or ARCH_WANT_DEFAULT_BPF_JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/f78ad24795c2966efcc2ee19025fa3459f622185.1575903816.git.daniel@iogearbox.net
2019-12-09 16:08:03 +01:00
x86/mm: Disable hugetlb page table sharing on 32-bit Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86. Page table sharing requires at least three levels because it involves shared references to PMD tables; 32-bit x86 has either two-level paging (without PAE) or three-level paging (with PAE), but even with three-level paging, having a dedicated PGD entry for hugetlb is only barely possible (because the PGD only has four entries), and it seems unlikely anyone's actually using PMD sharing on 32-bit. Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which has 2-level paging) became particularly problematic after commit 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"), since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and the `pt_share_count` (for PMDs) share the same union storage - and with 2-level paging, PMDs are PGDs. (For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the configuration of page tables such that it is never enabled with 2-level paging.) Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.") Reported-by: Vitaly Chikunov <vt@altlinux.org> Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Vitaly Chikunov <vt@altlinux.org> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com
2025-07-02 10:32:04 +02:00
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 15:37:18 -07:00
x86/mm: Prepare for opt-in based L1D flush in switch_mm() The goal of this is to allow tasks that want to protect sensitive information, against e.g. the recently found snoop assisted data sampling vulnerabilites, to flush their L1D on being switched out. This protects their data from being snooped or leaked via side channels after the task has context switched out. This could also be used to wipe L1D when an untrusted task is switched in, but that's not a really well defined scenario while the opt-in variant is clearly defined. The mechanism is default disabled and can be enabled on the kernel command line. Prepare for the actual prctl based opt-in: 1) Provide the necessary setup functionality similar to the other mitigations and enable the static branch when the command line option is set and the CPU provides support for hardware assisted L1D flushing. Software based L1D flush is not supported because it's CPU model specific and not really well defined. This does not come with a sysfs file like the other mitigations because it is not bound to any specific vulnerability. Support has to be queried via the prctl(2) interface. 2) Add TIF_SPEC_L1D_FLUSH next to L1D_SPEC_IB so the two bits can be mangled into the mm pointer in one go which allows to reuse the existing mechanism in switch_mm() for the conditional IBPB speculation barrier efficiently. 3) Add the L1D flush specific functionality which flushes L1D when the outgoing task opted in. Also check whether the incoming task has requested L1D flush and if so validate that it is not accidentaly running on an SMT sibling as this makes the whole excercise moot because SMT siblings share L1D which opens tons of other attack vectors. If that happens schedule task work which signals the incoming task on return to user/guest with SIGBUS as this is part of the paranoid L1D flush contract. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Balbir Singh <sblbir@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210108121056.21940-1-sblbir@amazon.com
2021-04-26 21:42:30 +02:00
x86: fs: kmsan: disable CONFIG_DCACHE_WORD_ACCESS dentry_string_cmp() calls read_word_at_a_time(), which might read uninitialized bytes to optimize string comparisons. Disabling CONFIG_DCACHE_WORD_ACCESS should prohibit this optimization, as well as (probably) similar ones. Link: https://lkml.kernel.org/r/20220915150417.722975-39-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 17:04:12 +02:00
EDAC changes, v2: * New APM X-Gene SoC EDAC driver (Loc Ho) * AMD error injection module improvements (Aravind Gopalakrishnan) * Altera Arria 10 support (Thor Thayer) * misc fixes and cleanups all over the place -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJViuInAAoJEBLB8Bhh3lVKHT8QAKkHIMreO8obo09haxNJlfdF BaG7SNEDhvcgQ1B76RsjnjkUpsivvUt+mCYMP+BxcAqFrTA33UZCCOK5tEhGb1wr matRdR6+aezqAl2e/0/Ti25bWOkDxcOeazh2TyezuyIXtaJjOq1oZC7OaYGmxPun NlZY+/uY1eiHlewKsK04y8G8J5i4wGoKnuxBvOyELT90+a+fLfAOshAp0D4r0piB Znv0ydsHlu+Wx57slg1DktlsyswmcGS9WfWwwTlELOLulKgN8wEAVYzUB5pJzNbz ehq0J4wYz95juXADC4M4tEjErHVJNl6PbyMqwt0+XUUJ1NSgOj7Q6iqwxDoZX8km oxiLVydQBtoIzF1LojFKAVZDFnrMKHKwK3RaDaUJjTI90+tVzEU8xsBlUf6+EgD2 Ss2RH8Gfuf52RdtwHh9++T1ur5rM9YNCAm31msq06mcOf0bEtmDbhZ+fVC5mjhqB fIb3hxnk0r2BVg+ZCN/boxGS6RzUtYVcCXaBPDMeHcg9BEEds70KCFEcsX7TvJIg 5/SHI+033MylqkX2zrgDQLj7CQk3R0jaotHVbdhLupyOldcM7r5uF+VO84drNWGN GfM2lpyE/swZWnzKuotgYIGR1XvFjtJAVAyNGIvwP+ajjTsqXzEnLSLClY5LWfYd nSSSMpCCqsEmhoWftOix =Id4f -----END PGP SIGNATURE----- Merge tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: - New APM X-Gene SoC EDAC driver (Loc Ho) - AMD error injection module improvements (Aravind Gopalakrishnan) - Altera Arria 10 support (Thor Thayer) - misc fixes and cleanups all over the place * tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (28 commits) EDAC: Update Documentation/edac.txt EDAC: Fix typos in Documentation/edac.txt EDAC, mce_amd_inj: Set MISCV on injection EDAC, mce_amd_inj: Move bit preparations before the injection EDAC, mce_amd_inj: Cleanup and simplify README EDAC, altera: Do not allow suspend when EDAC is enabled EDAC, mce_amd_inj: Make inj_type static arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support EDAC, altera: Add Arria10 EDAC support EDAC, altera: Refactor for Altera CycloneV SoC EDAC, altera: Generalize driver to use DT Memory size EDAC, mce_amd_inj: Add README file EDAC, mce_amd_inj: Add individual permissions field to dfs_node EDAC, mce_amd_inj: Modify flags attribute to use string arguments EDAC, mce_amd_inj: Read out number of MCE banks from the hardware EDAC, mce_amd_inj: Use MCE_INJECT_GET macro for bank node too EDAC, xgene: Fix cpuid abuse EDAC, mpc85xx: Extend error address to 64 bit EDAC, mpc8xxx: Adapt for FSL SoC EDAC, edac_stub: Drop arch-specific include ...
2015-06-24 19:52:06 -07:00
x86: Select HARDIRQS_SW_RESEND on x86 Modern x86 laptops are starting to use GPIO pins as interrupts more and more, e.g. touchpads and touchscreens have almost all moved away from PS/2 and USB to using I2C with a GPIO pin as interrupt. Modern x86 laptops also have almost all moved to using s2idle instead of using the system S3 ACPI power state to suspend. The Intel and AMD pinctrl drivers do not define irq_retrigger handlers for the irqchips they register, this is causing edge triggered interrupts which happen while suspended using s2idle to get lost. One specific example of this is the lid switch on some devices, lid switches used to be handled by the embedded-controller, but now the lid open/closed sensor is sometimes directly connected to a GPIO pin. On most devices the ACPI code for this looks like this: Method (_E00, ...) { Notify (LID0, 0x80) // Status Change } Where _E00 is an ACPI event handler for changes on both edges of the GPIO connected to the lid sensor, this event handler is then combined with an _LID method which directly reads the pin. When the device is resumed by opening the lid, the GPIO interrupt will wake the system, but because the pinctrl irqchip doesn't have an irq_retrigger handler, the Notify will not happen. This is not a problem in the case the _LID method directly reads the GPIO, because the drivers/acpi/button.c code will call _LID on resume anyways. But some devices have an event handler for the GPIO connected to the lid sensor which looks like this: Method (_E00, ...) { if (LID_GPIO == One) LIDS = One else LIDS = Zero Notify (LID0, 0x80) // Status Change } And the _LID method returns the cached LIDS value, since on open we do not re-run the edge-interrupt handler when we re-enable IRQS on resume (because of the missing irq_retrigger handler), _LID now will keep reporting closed, as LIDS was never changed to reflect the open status, this causes userspace to re-resume the laptop again shortly after opening the lid. The Intel GPIO controllers do not allow implementing irq_retrigger without emulating it in software, at which point we are better of just using the generic HARDIRQS_SW_RESEND mechanism rather then re-implementing software emulation for this separately in aprox. 14 different pinctrl drivers. Select HARDIRQS_SW_RESEND to solve the problem of edge-triggered GPIO interrupts not being re-triggered on resume when they were triggered during suspend (s2idle) and/or when they were the cause of the wakeup. This requires 008f1d60fe25 ("x86/apic/vector: Force interupt handler invocation to irq context") c16816acd086 ("genirq: Add protection against unsafe usage of generic_handle_irq()") to protect the APIC based interrupts from being wreckaged by a software resend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200123210242.53367-1-hdegoede@redhat.com
2020-01-23 22:02:42 +01:00
kernel/watchdog: Prevent false positives with turbo modes The hardlockup detector on x86 uses a performance counter based on unhalted CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the performance counter period, so the hrtimer should fire 2-3 times before the performance counter NMI fires. The NMI code checks whether the hrtimer fired since the last invocation. If not, it assumess a hard lockup. The calculation of those periods is based on the nominal CPU frequency. Turbo modes increase the CPU clock frequency and therefore shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x nominal frequency) the perf/NMI period is shorter than the hrtimer period which leads to false positives. A simple fix would be to shorten the hrtimer period, but that comes with the side effect of more frequent hrtimer and softlockup thread wakeups, which is not desired. Implement a low pass filter, which checks the perf/NMI period against kernel time. If the perf/NMI fires before 4/5 of the watchdog period has elapsed then the event is ignored and postponed to the next perf/NMI. That solves the problem and avoids the overhead of shorter hrtimer periods and more frequent softlockup thread wakeups. Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector") Reported-and-tested-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dzickus@redhat.com Cc: prarit@redhat.com Cc: ak@linux.intel.com Cc: babu.moger@oracle.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: acme@redhat.com Cc: stable@vger.kernel.org Cc: atomlin@redhat.com Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
2017-08-15 09:50:13 +02:00
x86/mm/kasan: don't use vmemmap_populate() to initialize shadow The kasan shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for kasan, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 17:36:35 -08:00
x86, kfence: enable KFENCE for x86 Add architecture specific implementation details for KFENCE and enable KFENCE for the x86 architecture. In particular, this implements the required interface in <asm/kfence.h> for setting up the pool and providing helper functions for protecting and unprotecting pages. For x86, we need to ensure that the pool uses 4K pages, which is done using the set_memory_4k() helper function. [elver@google.com: add missing copyright and description header] Link: https://lkml.kernel.org/r/20210118092159.145934-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-3-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25 17:18:57 -08:00
x86: kmsan: enable KMSAN builds for x86 Make KMSAN usable by adding the necessary Kconfig bits. Also declare x86-specific functions checking address validity in arch/x86/include/asm/kmsan.h. Link: https://lkml.kernel.org/r/20220915150417.722975-44-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 17:04:17 +02:00
x86: mm: support ARCH_MMAP_RND_BITS x86: arch_mmap_rnd() uses hard-coded values, 8 for 32-bit and 28 for 64-bit, to generate the random offset for the mmap base address. This value represents a compromise between increased ASLR effectiveness and avoiding address-space fragmentation. Replace it with a Kconfig option, which is sensibly bounded, so that platform developers may choose where to place this compromise. Keep default values as new minimums. Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 15:20:06 -08:00
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 17:17:19 +03:00
arch: enable relative relocations for arm64, power and x86 Patch series "add support for relative references in special sections", v10. This adds support for emitting special sections such as initcall arrays, PCI fixups and tracepoints as relative references rather than absolute references. This reduces the size by 50% on 64-bit architectures, but more importantly, it removes the need for carrying relocation metadata for these sections in relocatable kernels (e.g., for KASLR) that needs to be fixed up at boot time. On arm64, this reduces the vmlinux footprint of such a reference by 8x (8 byte absolute reference + 24 byte RELA entry vs 4 byte relative reference) Patch #3 was sent out before as a single patch. This series supersedes the previous submission. This version makes relative ksymtab entries dependent on the new Kconfig symbol HAVE_ARCH_PREL32_RELOCATIONS rather than trying to infer from kbuild test robot replies for which architectures it should be blacklisted. Patch #1 introduces the new Kconfig symbol HAVE_ARCH_PREL32_RELOCATIONS, and sets it for the main architectures that are expected to benefit the most from this feature, i.e., 64-bit architectures or ones that use runtime relocations. Patch #2 add support for #define'ing __DISABLE_EXPORTS to get rid of ksymtab/kcrctab sections in decompressor and EFI stub objects when rebuilding existing C files to run in a different context. Patches #4 - #6 implement relative references for initcalls, PCI fixups and tracepoints, respectively, all of which produce sections with order ~1000 entries on an arm64 defconfig kernel with tracing enabled. This means we save about 28 KB of vmlinux space for each of these patches. [From the v7 series blurb, which included the jump_label patches as well]: For the arm64 kernel, all patches combined reduce the memory footprint of vmlinux by about 1.3 MB (using a config copied from Ubuntu that has KASLR enabled), of which ~1 MB is the size reduction of the RELA section in .init, and the remaining 300 KB is reduction of .text/.data. This patch (of 6): Before updating certain subsystems to use place relative 32-bit relocations in special sections, to save space and reduce the number of absolute relocations that need to be processed at runtime by relocatable kernels, introduce the Kconfig symbol and define it for some architectures that should be able to support and benefit from it. Link: http://lkml.kernel.org/r/20180704083651.24360-2-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: James Morris <jmorris@namei.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>, Cc: James Morris <james.morris@microsoft.com> Cc: Jessica Yu <jeyu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21 21:56:00 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-04 18:35:36 -07:00
x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y) This allows x86_64 kernels to enable vmapped stacks by setting HAVE_ARCH_VMAP_STACK=y - which enables the CONFIG_VMAP_STACK=y high level Kconfig option. There are a couple of interesting bits: First, x86 lazily faults in top-level paging entries for the vmalloc area. This won't work if we get a page fault while trying to access the stack: the CPU will promote it to a double-fault and we'll die. To avoid this problem, probe the new stack when switching stacks and forcibly populate the pgd entry for the stack when switching mms. Second, once we have guard pages around the stack, we'll want to detect and handle stack overflow. I didn't enable it on x86_32. We'd need to rework the double-fault code a bit and I'm concerned about running out of vmalloc virtual addresses under some workloads. This patch, by itself, will behave somewhat erratically when the stack overflows while RSP is still more than a few tens of bytes above the bottom of the stack. Specifically, we'll get #PF and make it to no_context and them oops without reliably triggering a double-fault, and no_context doesn't know about stack overflows. The next patch will improve that case. Thank you to Nadav and Brian for helping me pay enough attention to the SDM to hopefully get this right. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c88f3e2920b18e6cc621d772a04a62c06869037e.1470907718.git.luto@kernel.org [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11 02:35:23 -07:00
ftrace: Have architectures opt-in for mcount build time sorting First S390 complained that the sorting of the mcount sections at build time caused the kernel to crash on their architecture. Now PowerPC is complaining about it too. And also ARM64 appears to be having issues. It may be necessary to also update the relocation table for the values in the mcount table. Not only do we have to sort the table, but also update the relocations that may be applied to the items in the table. If the system is not relocatable, then it is fine to sort, but if it is, some architectures may have issues (although x86 does not as it shifts all addresses the same). Add a HAVE_BUILDTIME_MCOUNT_SORT that an architecture can set to say it is safe to do the sorting at build time. Also update the config to compile in build time sorting in the sorttable code in scripts/ to depend on CONFIG_BUILDTIME_MCOUNT_SORT. Link: https://lore.kernel.org/all/944D10DA-8200-4BA9-8D0A-3BED9AA99F82@linux.ibm.com/ Link: https://lkml.kernel.org/r/20220127153821.3bc1ac6e@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Yinan Liu <yinan@linux.alibaba.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Tested-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-25 09:19:10 -05:00
x86: enable DMA CMA with swiotlb The DMA Contiguous Memory Allocator support on x86 is disabled when swiotlb config option is enabled. So DMA CMA is always disabled on x86_64 because swiotlb is always enabled. This attempts to support for DMA CMA with enabling swiotlb config option. The contiguous memory allocator on x86 is integrated in the function dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for dma_alloc_coherent(). x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops tries to allocate with dma_generic_alloc_coherent() firstly and then swiotlb_alloc_coherent() is called as a fallback. The main part of supporting DMA CMA with swiotlb is that changing x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for dma_free_coherent() so that it can distinguish memory allocated by dma_generic_alloc_coherent() from one allocated by swiotlb_alloc_coherent() and release it with dma_generic_free_coherent() which can handle contiguous memory. This change requires making is_swiotlb_buffer() global function. This also needs to change .free callback in the dma_map_ops for amd_gart and sta2x11, because these dma_ops are also using dma_generic_alloc_coherent(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:06:50 -07:00
fprobe: Use ftrace_regs in fprobe exit handler Change the fprobe exit handler to use ftrace_regs structure instead of pt_regs. This also introduce HAVE_FTRACE_REGS_HAVING_PT_REGS which means the ftrace_regs is including the pt_regs so that ftrace_regs can provide pt_regs without memory allocation. Fprobe introduces a new dependency with that. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: bpf <bpf@vger.kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Cc: Matt Bobrowski <mattbobrowski@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Yonghong Song <yonghong.song@linux.dev> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Stanislav Fomichev <sdf@fomichev.me> Cc: Hao Luo <haoluo@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/173518995092.391279.6765116450352977627.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-26 14:12:31 +09:00
bpf, x86_32: add eBPF JIT compiler for ia32 The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF only. Classic BPF is supported because of the conversion by BPF core. Almost all instructions from eBPF ISA supported except the following: BPF_ALU64 | BPF_DIV | BPF_K BPF_ALU64 | BPF_DIV | BPF_X BPF_ALU64 | BPF_MOD | BPF_K BPF_ALU64 | BPF_MOD | BPF_X BPF_STX | BPF_XADD | BPF_W BPF_STX | BPF_XADD | BPF_DW It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment. IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others eBPF registers, R0-R10, are simulated through scratch space on stack. The reasons behind the hardware registers allocation policy are: 1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit for general eBPF 64bit register simulation. 2:We need at least 4 registers to simulate most eBPF ISA operations on registers operands instead of on register&memory operands. 3:We need to put BPF_REG_AX on hardware registers, or constant blinding will degrade jit performance heavily. Tested on PC (Intel(R) Core(TM) i5-5200U CPU). Testing results on i5-5200U: 1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed] 2) test_progs: Summary: 83 PASSED, 0 FAILED. 3) test_lpm: OK 4) test_lru_map: OK 5) test_verifier: Summary: 828 PASSED, 0 FAILED. Above tests are all done in following two conditions separately: 1:bpf_jit_enable=1 and bpf_jit_harden=0 2:bpf_jit_enable=1 and bpf_jit_harden=2 Below are some numbers for this jit implementation: Note: I run test_progs in kselftest 100 times continuously for every condition, the numbers are in format: total/times=avg. The numbers that test_bpf reports show almost the same relation. a:jit_enable=0 and jit_harden=0 b:jit_enable=1 and jit_harden=0 test_pkt_access:PASS:ipv4:15622/100=156 test_pkt_access:PASS:ipv4:10674/100=106 test_pkt_access:PASS:ipv6:9130/100=91 test_pkt_access:PASS:ipv6:4855/100=48 test_xdp:PASS:ipv4:240198/100=2401 test_xdp:PASS:ipv4:138912/100=1389 test_xdp:PASS:ipv6:137326/100=1373 test_xdp:PASS:ipv6:68542/100=685 test_l4lb:PASS:ipv4:61100/100=611 test_l4lb:PASS:ipv4:37302/100=373 test_l4lb:PASS:ipv6:101000/100=1010 test_l4lb:PASS:ipv6:55030/100=550 c:jit_enable=1 and jit_harden=2 test_pkt_access:PASS:ipv4:10558/100=105 test_pkt_access:PASS:ipv6:5092/100=50 test_xdp:PASS:ipv4:131902/100=1319 test_xdp:PASS:ipv6:77932/100=779 test_l4lb:PASS:ipv4:38924/100=389 test_l4lb:PASS:ipv6:57520/100=575 The numbers show we get 30%~50% improvement. See Documentation/networking/filter.txt for more information. Changelog: Changes v5-v6: 1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for consistence reason. 2:Clean up non-standard comments, reported by Daniel Borkmann. 3:Fix a memory leak issue, repoted by Daniel Borkmann. Changes v4-v5: 1:Delete is_on_stack, BPF_REG_AX is the only one on real hardware registers, so just check with it. 2:Apply commit 1612a981b766 ("bpf, x64: fix JIT emission for dead code"), suggested by Daniel Borkmann. Changes v3-v4: 1:Fix changelog in commit. I install llvm-6.0, then test_progs willn't report errors. I submit another patch: "bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform" to fix another problem, after that patch, test_verifier willn't report errors too. 2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation. Changes v2-v3: 1:Move BPF_REG_AX to real hardware registers for performance reason. 3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann. 4:Delete partial codes in 1c2a088a6626, suggested by Daniel Borkmann. 5:Some bug fixes and comments improvement. Changes v1-v2: 1:Fix bug in emit_ia32_neg64. 2:Fix bug in emit_ia32_arsh_r64. 3:Delete filename in top level comment, suggested by Thomas Gleixner. 4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner. 5:Rewrite some words in changelog. 6:CodingSytle improvement and a little more comments. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-03 14:10:43 +08:00
exit_thread: remove empty bodies Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:00:16 -07:00
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC Add CONFIG_HAVE_FTRACE_GRAPH_FUNC kconfig in addition to ftrace_graph_func macro check. This is for the other feature (e.g. FPROBE) which requires to access ftrace_regs from fgraph_ops::entryfunc() can avoid compiling if the fgraph can not pass the valid ftrace_regs. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Naveen N Rao <naveen@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173519001472.391279.1174901685282588467.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-26 14:13:34 +09:00
fgraph: Replace fgraph_ret_regs with ftrace_regs Use ftrace_regs instead of fgraph_ret_regs for tracing return value on function_graph tracer because of simplifying the callback interface. The CONFIG_HAVE_FUNCTION_GRAPH_RETVAL is also replaced by CONFIG_HAVE_FUNCTION_GRAPH_FREGS. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173518991508.391279.16635322774382197642.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-26 14:11:55 +09:00
GCC plugin infrastructure This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-24 00:09:38 +02:00
x86: mremap speedup - Enable HAVE_MOVE_PUD HAVE_MOVE_PUD enables remapping pages at the PUD level if both the source and destination addresses are PUD-aligned. With HAVE_MOVE_PUD enabled it can be inferred that there is approximately a 13x improvement in performance on x86. (See data below). ------- Test Results --------- The following results were obtained using a 5.4 kernel, by remapping a PUD-aligned, 1GB sized region to a PUD-aligned destination. The results from 10 iterations of the test are given below: Total mremap times for 1GB data on x86. All times are in nanoseconds. Control HAVE_MOVE_PUD 180394 15089 235728 14056 238931 25741 187330 13838 241742 14187 177925 14778 182758 14728 160872 14418 205813 15107 245722 13998 205721.5 15594 <-- Mean time in nanoseconds A 1GB mremap completion time drops from ~205 microseconds to ~15 microseconds on x86. (~13x speed up). Link: https://lkml.kernel.org/r/20201014005320.2233162-6-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Geffon <bgeffon@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Gavin Shan <gshan@redhat.com> Cc: Hassan Naveed <hnaveed@wavecomp.com> Cc: Jia He <justin.he@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14 19:07:40 -08:00
printk/nmi: generic solution for safe printk in NMI printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:00:33 -07:00
perf: Unified API to record selective sets of arch registers This brings a new API to help the selective dump of registers on event sampling, and its implementation for x86 arch. Added HAVE_PERF_REGS config option to determine if the architecture provides perf registers ABI. The information about desired registers will be passed in u64 mask. It's up to the architecture to map the registers into the mask bits. For the x86 arch implementation, both 32 and 64 bit registers bits are defined within single enum to ensure 64 bit system can provide register dump for compat task if needed in the future. Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> [ Added missing linux/errno.h include ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 15:20:36 +02:00
2012-08-07 15:20:40 +02:00
iommu/sva: invalidate stale IOTLB entries for kernel address space Introduce a new IOMMU interface to flush IOTLB paging cache entries for the CPU kernel address space. This interface is invoked from the x86 architecture code that manages combined user and kernel page tables, specifically before any kernel page table page is freed and reused. This addresses the main issue with vfree() which is a common occurrence and can be triggered by unprivileged users. While this resolves the primary problem, it doesn't address some extremely rare case related to memory unplug of memory that was present as reserved memory at boot, which cannot be triggered by unprivileged users. The discussion can be found at the link below. Enable SVA on x86 architecture since the IOMMU can now receive notification to flush the paging cache before freeing the CPU kernel page table pages. Link: https://lkml.kernel.org/r/20251022082635.2462433-9-baolu.lu@linux.intel.com Link: https://lore.kernel.org/linux-iommu/04983c62-3b1d-40d4-93ae-34ca04b827e5@intel.com/ Co-developed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Jann Horn <jannh@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-10-22 16:26:34 +08:00
mm: percpu: generalize percpu related config Patch series "mm: percpu: Cleanup percpu first chunk function". When supporting page mapping percpu first chunk allocator on arm64, we found there are lots of duplicated codes in percpu embed/page first chunk allocator. This patchset is aimed to cleanup them and should no function change. The currently supported status about 'embed' and 'page' in Archs shows below, embed: NEED_PER_CPU_PAGE_FIRST_CHUNK page: NEED_PER_CPU_EMBED_FIRST_CHUNK embed page ------------------------ arm64 Y Y mips Y N powerpc Y Y riscv Y N sparc Y Y x86 Y Y ------------------------ There are two interfaces about percpu first chunk allocator, extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the pcpu_embed/page_first_chunk(). 1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be provided when archs supported NUMA. 2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too, a generic pcpu_populate_pte() which marked '__weak' is provided, if you need a different function to populate pte on the arch(like x86), please provide its own implementation. [1] https://github.com/kevin78/linux.git percpu-cleanup This patch (of 4): The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/ NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have duplicate definitions on platforms that subscribe it. Move them into mm, drop these redundant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19 18:07:41 -08:00
sched/preempt: Add PREEMPT_DYNAMIC using static keys Where an architecture selects HAVE_STATIC_CALL but not HAVE_STATIC_CALL_INLINE, each static call has an out-of-line trampoline which will either branch to a callee or return to the caller. On such architectures, a number of constraints can conspire to make those trampolines more complicated and potentially less useful than we'd like. For example: * Hardware and software control flow integrity schemes can require the addition of "landing pad" instructions (e.g. `BTI` for arm64), which will also be present at the "real" callee. * Limited branch ranges can require that trampolines generate or load an address into a register and perform an indirect branch (or at least have a slow path that does so). This loses some of the benefits of having a direct branch. * Interaction with SW CFI schemes can be complicated and fragile, e.g. requiring that we can recognise idiomatic codegen and remove indirections understand, at least until clang proves more helpful mechanisms for dealing with this. For PREEMPT_DYNAMIC, we don't need the full power of static calls, as we really only need to enable/disable specific preemption functions. We can achieve the same effect without a number of the pain points above by using static keys to fold early returns into the preemption functions themselves rather than in an out-of-line trampoline, effectively inlining the trampoline into the start of the function. For arm64, this results in good code generation. For example, the dynamic_cond_resched() wrapper looks as follows when enabled. When disabled, the first `B` is replaced with a `NOP`, resulting in an early return. | <dynamic_cond_resched>: | bti c | b <dynamic_cond_resched+0x10> // or `nop` | mov w0, #0x0 | ret | mrs x0, sp_el0 | ldr x0, [x0, #8] | cbnz x0, <dynamic_cond_resched+0x8> | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret ... compared to the regular form of the function: | <__cond_resched>: | bti c | mrs x0, sp_el0 | ldr x1, [x0, #8] | cbz x1, <__cond_resched+0x18> | mov w0, #0x0 | ret | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret Any architecture which implements static keys should be able to use this to implement PREEMPT_DYNAMIC with similar cost to non-inlined static calls. Since this is likely to have greater overhead than (inlined) static calls, PREEMPT_DYNAMIC is only defaulted to enabled when HAVE_PREEMPT_DYNAMIC_CALL is selected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220214165216.2231574-6-mark.rutland@arm.com
2022-02-14 16:52:14 +00:00
x86: Add support for restartable sequences Call the rseq_handle_notify_resume() function on return to userspace if TIF_NOTIFY_RESUME thread flag is set. Perform fixup on the pre-signal frame when a signal is delivered on top of a restartable sequence critical section. Check that system calls are not invoked from within rseq critical sections by invoking rseq_signal() from syscall_return_slowpath(). With CONFIG_DEBUG_RSEQ, such behavior results in termination of the process with SIGSEGV. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180602124408.8430-7-mathieu.desnoyers@efficios.com
2018-06-02 08:43:58 -04:00
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it Implement the validation function which tells the core code whether parallel bringup is possible. The only condition for now is that the kernel does not run in an encrypted guest as these will trap the RDMSR via #VC, which cannot be handled at that point in early startup. There was an earlier variant for AMD-SEV which used the GHBC protocol for retrieving the APIC ID via CPUID, but there is no guarantee that the initial APIC ID in CPUID is the same as the real APIC ID. There is no enforcement from the secure firmware and the hypervisor can assign APIC IDs as it sees fit as long as the ACPI/MADT table is consistent with that assignment. Unfortunately there is no RDMSR GHCB protocol at the moment, so enabling AMD-SEV guests for parallel startup needs some more thought. Intel-TDX provides a secure RDMSR hypercall, but supporting that is outside the scope of this change. Fixup announce_cpu() as e.g. on Hyper-V CPU1 is the secondary sibling of CPU0, which makes the @cpu == 1 logic in announce_cpu() fall apart. [ mikelley: Reported the announce_cpu() fallout Originally-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205257.467571745@linutronix.de
2023-05-12 23:07:56 +02:00
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 17:48:27 +02:00
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it Implement the validation function which tells the core code whether parallel bringup is possible. The only condition for now is that the kernel does not run in an encrypted guest as these will trap the RDMSR via #VC, which cannot be handled at that point in early startup. There was an earlier variant for AMD-SEV which used the GHBC protocol for retrieving the APIC ID via CPUID, but there is no guarantee that the initial APIC ID in CPUID is the same as the real APIC ID. There is no enforcement from the secure firmware and the hypervisor can assign APIC IDs as it sees fit as long as the ACPI/MADT table is consistent with that assignment. Unfortunately there is no RDMSR GHCB protocol at the moment, so enabling AMD-SEV guests for parallel startup needs some more thought. Intel-TDX provides a secure RDMSR hypercall, but supporting that is outside the scope of this change. Fixup announce_cpu() as e.g. on Hyper-V CPU1 is the secondary sibling of CPU0, which makes the @cpu == 1 logic in announce_cpu() fall apart. [ mikelley: Reported the announce_cpu() fallout Originally-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205257.467571745@linutronix.de
2023-05-12 23:07:56 +02:00
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 15:17:36 -07:00
mm: percpu: generalize percpu related config Patch series "mm: percpu: Cleanup percpu first chunk function". When supporting page mapping percpu first chunk allocator on arm64, we found there are lots of duplicated codes in percpu embed/page first chunk allocator. This patchset is aimed to cleanup them and should no function change. The currently supported status about 'embed' and 'page' in Archs shows below, embed: NEED_PER_CPU_PAGE_FIRST_CHUNK page: NEED_PER_CPU_EMBED_FIRST_CHUNK embed page ------------------------ arm64 Y Y mips Y N powerpc Y Y riscv Y N sparc Y Y x86 Y Y ------------------------ There are two interfaces about percpu first chunk allocator, extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the pcpu_embed/page_first_chunk(). 1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be provided when archs supported NUMA. 2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too, a generic pcpu_populate_pte() which marked '__weak' is provided, if you need a different function to populate pte on the arch(like x86), please provide its own implementation. [1] https://github.com/kevin78/linux.git percpu-cleanup This patch (of 4): The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/ NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have duplicate definitions on platforms that subscribe it. Move them into mm, drop these redundant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19 18:07:41 -08:00
mm: introduce numa_memblks Move code dealing with numa_memblks from arch/x86 to mm/ and add Kconfig options to let x86 select it in its Kconfig. This code will be later reused by arch_numa. No functional changes. Link: https://lkml.kernel.org/r/20240807064110.1003856-18-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU] Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Samuel Holland <samuel.holland@sifive.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07 09:41:01 +03:00
arch: make TRACE_IRQFLAGS_NMI_SUPPORT generic On most architectures, IRQ flag tracing is disabled in NMI context, and architectures need to define and select TRACE_IRQFLAGS_NMI_SUPPORT in order to enable this. Commit: 859d069ee1ddd878 ("lockdep: Prepare for NMI IRQ state tracking") Permitted IRQ flag tracing in NMI context, allowing lockdep to work in NMI context where an architecture had suitable entry logic. At the time, most architectures did not have such suitable entry logic, and this broke lockdep on such architectures. Thus, this was partially disabled in commit: ed00495333ccc80f ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs") ... with architectures needing to select TRACE_IRQFLAGS_NMI_SUPPORT to enable IRQ flag tracing in NMI context. Currently TRACE_IRQFLAGS_NMI_SUPPORT is defined under arch/x86/Kconfig.debug. Move it to arch/Kconfig so architectures can select it without having to provide their own definition. Since the regular TRACE_IRQFLAGS_SUPPORT is selected by arch/x86/Kconfig, the select of TRACE_IRQFLAGS_NMI_SUPPORT is moved there too. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220511131733.4074499-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-11 14:17:32 +01:00
x86/process: Add AVX-512 usage elapsed time to /proc/pid/arch_status AVX-512 components usage can result in turbo frequency drop. So it's useful to expose AVX-512 usage elapsed time as a heuristic hint for user space job schedulers to cluster the AVX-512 using tasks together. Examples: $ while [ 1 ]; do cat /proc/tid/arch_status | grep AVX512; sleep 1; done AVX512_elapsed_ms: 4 AVX512_elapsed_ms: 8 AVX512_elapsed_ms: 4 This means that 4 milliseconds have elapsed since the tsks AVX512 usage was detected when the task was scheduled out. $ cat /proc/tid/arch_status | grep AVX512 AVX512_elapsed_ms: -1 '-1' indicates that no AVX512 usage was recorded for this task. The time exposed is not necessarily accurate when the arch_status file is read as the AVX512 usage is only evaluated when a task is scheduled out. Accurate usage information can be obtained with performance counters. [ tglx: Massaged changelog ] Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: peterz@infradead.org Cc: hpa@zytor.com Cc: ak@linux.intel.com Cc: tim.c.chen@linux.intel.com Cc: dave.hansen@intel.com Cc: arjan@linux.intel.com Cc: adobriyan@gmail.com Cc: aubrey.li@intel.com Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux API <linux-api@vger.kernel.org> Link: https://lkml.kernel.org/r/20190606012236.9391-2-aubrey.li@linux.intel.com
2019-06-06 09:22:35 +08:00
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node == Problem == The amount of SGX memory on a system is determined by the BIOS and it varies wildly between systems. It can be as small as dozens of MB's and as large as many GB's on servers. Just like how applications need to know how much regular RAM is available, enclave builders need to know how much SGX memory an enclave can consume. == Solution == Introduce a new sysfs file: /sys/devices/system/node/nodeX/x86/sgx_total_bytes to enumerate the amount of SGX memory available in each NUMA node. This serves the same function for SGX as /proc/meminfo or /sys/devices/system/node/nodeX/meminfo does for normal RAM. 'sgx_total_bytes' is needed today to help drive the SGX selftests. SGX-specific swap code is exercised by creating overcommitted enclaves which are larger than the physical SGX memory on the system. They currently use a CPUID-based approach which can diverge from the actual amount of SGX memory available. 'sgx_total_bytes' ensures that the selftests can work efficiently and do not attempt stupid things like creating a 100,000 MB enclave on a system with 128 MB of SGX memory. == Implementation Details == Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node: == ABI Design Discussion == As opposed to the per-node ABI, a single, global ABI was considered. However, this would prevent enclaves from being able to size themselves so that they fit on a single NUMA node. Essentially, a single value would rule out NUMA optimizations for enclaves. Create a new "x86/" directory inside each "nodeX/" sysfs directory. 'sgx_total_bytes' is expected to be the first of at least a few sgx-specific files to be placed in the new directory. Just scanning /proc/meminfo, these are the no-brainers that we have for RAM, but we need for SGX: MemTotal: xxxx kB // sgx_total_bytes (implemented here) MemFree: yyyy kB // sgx_free_bytes SwapTotal: zzzz kB // sgx_swapped_bytes So, at *least* three. I think we will eventually end up needing something more along the lines of a dozen. A new directory (as opposed to being in the nodeX/ "root") directory avoids cluttering the root with several "sgx_*" files. Place the new file in a new "nodeX/x86/" directory because SGX is highly x86-specific. It is very unlikely that any other architecture (or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/" as opposed to "x86/" was also considered. But, there is a real chance this can get used for other arch-specific purposes. [ dhansen: rewrite changelog ] Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org
2021-11-16 18:21:16 +02:00
bpf: Move bpf_dispatcher function out of ftrace locations The dispatcher function is attached/detached to trampoline by dispatcher update function. At the same time it's available as ftrace attachable function. After discussion [1] the proposed solution is to use compiler attributes to alter bpf_dispatcher_##name##_func function: - remove it from being instrumented with __no_instrument_function__ attribute, so ftrace has no track of it - but still generate 5 nop instructions with patchable_function_entry(5) attribute, which are expected by bpf_arch_text_poke used by dispatcher update function Enabling HAVE_DYNAMIC_FTRACE_NO_PATCHABLE option for x86, so __patchable_function_entries functions are not part of ftrace/mcount locations. Adding attributes to bpf_dispatcher_XXX function on x86_64 so it's kept out of ftrace locations and has 5 byte nop generated at entry. These attributes need to be arch specific as pointed out by Ilya Leoshkevic in here [2]. The dispatcher image is generated only for x86_64 arch, so the code can stay as is for other archs. [1] https://lore.kernel.org/bpf/20220722110811.124515-1-jolsa@kernel.org/ [2] https://lore.kernel.org/bpf/969a14281a7791c334d476825863ee449964dd0c.camel@linux.ibm.com/ Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/bpf/20220903131154.420467-3-jolsa@kernel.org
2022-09-03 15:11:54 +02:00
x86: mm: support ARCH_MMAP_RND_BITS x86: arch_mmap_rnd() uses hard-coded values, 8 for 32-bit and 28 for 64-bit, to generate the random offset for the mmap base address. This value represents a compromise between increased ASLR effectiveness and avoiding address-space fragmentation. Replace it with a Kconfig option, which is sensibly bounded, so that platform developers may choose where to place this compromise. Keep default values as new minimums. Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 15:20:06 -08:00
x86: kasan: kmsan: support CONFIG_GENERIC_CSUM on x86, enable it for KASAN/KMSAN This is needed to allow memory tools like KASAN and KMSAN see the memory accesses from the checksum code. Without CONFIG_GENERIC_CSUM the tools can't see memory accesses originating from handwritten assembly code. For KASAN it's a question of detecting more bugs, for KMSAN using the C implementation also helps avoid false positives originating from seemingly uninitialized checksum values. Link: https://lkml.kernel.org/r/20220915150417.722975-38-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 17:04:11 +02:00
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 14:56:42 +05:30
x86/Kconfig: Enable X86_X2APIC by default and improve help text As many current platforms (most modern Intel CPUs and QEMU) have x2APIC present, enable CONFIG_X86_X2APIC by default as it gives performance and functionality benefits. Additionally, if the BIOS has already switched APIC to x2APIC mode, but CONFIG_X86_X2APIC is disabled, the kernel will panic in arch/x86/kernel/apic/apic.c . Also improve the help text, which was confusing and really did not describe what the feature is about. Help text references and discussion: Both Intel [1] and AMD [3] spell the name as "x2APIC", not "x2apic". "It allows faster access to the local APIC" [2], chapter 2.1, page 15: "More efficient MSR interface to access APIC registers." "x2APIC was introduced in Intel CPUs around 2008": I was unable to find specific information which Intel CPUs support x2APIC. Wikipedia claims it was "introduced with the Nehalem microarchitecture in November 2008", but I was not able to confirm this independently. At least some Nehalem CPUs do not support x2APIC [1]. The documentation [2] is dated June 2008. Linux kernel also introduced x2APIC support in 2008, so the year seems to be right. "and in AMD EPYC CPUs in 2019": [3], page 15: "AMD introduced an x2APIC in our EPYC 7002 Series processors for the first time." "It is also frequently emulated in virtual machines, even when the host CPU does not support it." [1] "If this configuration option is disabled, the kernel will not boot on some platforms that have x2APIC enabled." According to some BIOS documentation [4], the x2APIC may be "disabled", "enabled", or "force enabled" on this system. I think that "enabled" means "made available to the operating system, but not already turned on" and "force enabled" means "already switched to x2APIC mode when the OS boots". Only in the latter mode a kernel without CONFIG_X86_X2APIC will panic in validate_x2apic() in arch/x86/kernel/apic/apic.c . QEMU 4.2.1 and my Intel HP laptop (bought in 2019) use the "enabled" mode and the kernel does not panic. [1] "Re: [Qemu-devel] [Question] why x2apic's set by default without host sup" https://lists.gnu.org/archive/html/qemu-devel/2013-07/msg03527.html [2] Intel® 64 Architecture x2APIC Specification, ( https://www.naic.edu/~phil/software/intel/318148.pdf ) [3] Workload Tuning Guide for AMD EPYC ™ 7002 Series Processor Based Servers Application Note, https://developer.amd.com/wp-content/resources/56745_0.80.pdf [4] UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Gen10, ProLiant Gen10 Plus Servers and HPE Synergy: Enabling or disabling Processor x2APIC Support https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_enable_disable_x2APIC_support.html Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-1-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:43 +01:00
x86/Kconfig: Enable X86_X2APIC by default and improve help text As many current platforms (most modern Intel CPUs and QEMU) have x2APIC present, enable CONFIG_X86_X2APIC by default as it gives performance and functionality benefits. Additionally, if the BIOS has already switched APIC to x2APIC mode, but CONFIG_X86_X2APIC is disabled, the kernel will panic in arch/x86/kernel/apic/apic.c . Also improve the help text, which was confusing and really did not describe what the feature is about. Help text references and discussion: Both Intel [1] and AMD [3] spell the name as "x2APIC", not "x2apic". "It allows faster access to the local APIC" [2], chapter 2.1, page 15: "More efficient MSR interface to access APIC registers." "x2APIC was introduced in Intel CPUs around 2008": I was unable to find specific information which Intel CPUs support x2APIC. Wikipedia claims it was "introduced with the Nehalem microarchitecture in November 2008", but I was not able to confirm this independently. At least some Nehalem CPUs do not support x2APIC [1]. The documentation [2] is dated June 2008. Linux kernel also introduced x2APIC support in 2008, so the year seems to be right. "and in AMD EPYC CPUs in 2019": [3], page 15: "AMD introduced an x2APIC in our EPYC 7002 Series processors for the first time." "It is also frequently emulated in virtual machines, even when the host CPU does not support it." [1] "If this configuration option is disabled, the kernel will not boot on some platforms that have x2APIC enabled." According to some BIOS documentation [4], the x2APIC may be "disabled", "enabled", or "force enabled" on this system. I think that "enabled" means "made available to the operating system, but not already turned on" and "force enabled" means "already switched to x2APIC mode when the OS boots". Only in the latter mode a kernel without CONFIG_X86_X2APIC will panic in validate_x2apic() in arch/x86/kernel/apic/apic.c . QEMU 4.2.1 and my Intel HP laptop (bought in 2019) use the "enabled" mode and the kernel does not panic. [1] "Re: [Qemu-devel] [Question] why x2apic's set by default without host sup" https://lists.gnu.org/archive/html/qemu-devel/2013-07/msg03527.html [2] Intel® 64 Architecture x2APIC Specification, ( https://www.naic.edu/~phil/software/intel/318148.pdf ) [3] Workload Tuning Guide for AMD EPYC ™ 7002 Series Processor Based Servers Application Note, https://developer.amd.com/wp-content/resources/56745_0.80.pdf [4] UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Gen10, ProLiant Gen10 Plus Servers and HPE Synergy: Enabling or disabling Processor x2APIC Support https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_enable_disable_x2APIC_support.html Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-1-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:43 +01:00
x86/Kconfig: Enable X86_X2APIC by default and improve help text As many current platforms (most modern Intel CPUs and QEMU) have x2APIC present, enable CONFIG_X86_X2APIC by default as it gives performance and functionality benefits. Additionally, if the BIOS has already switched APIC to x2APIC mode, but CONFIG_X86_X2APIC is disabled, the kernel will panic in arch/x86/kernel/apic/apic.c . Also improve the help text, which was confusing and really did not describe what the feature is about. Help text references and discussion: Both Intel [1] and AMD [3] spell the name as "x2APIC", not "x2apic". "It allows faster access to the local APIC" [2], chapter 2.1, page 15: "More efficient MSR interface to access APIC registers." "x2APIC was introduced in Intel CPUs around 2008": I was unable to find specific information which Intel CPUs support x2APIC. Wikipedia claims it was "introduced with the Nehalem microarchitecture in November 2008", but I was not able to confirm this independently. At least some Nehalem CPUs do not support x2APIC [1]. The documentation [2] is dated June 2008. Linux kernel also introduced x2APIC support in 2008, so the year seems to be right. "and in AMD EPYC CPUs in 2019": [3], page 15: "AMD introduced an x2APIC in our EPYC 7002 Series processors for the first time." "It is also frequently emulated in virtual machines, even when the host CPU does not support it." [1] "If this configuration option is disabled, the kernel will not boot on some platforms that have x2APIC enabled." According to some BIOS documentation [4], the x2APIC may be "disabled", "enabled", or "force enabled" on this system. I think that "enabled" means "made available to the operating system, but not already turned on" and "force enabled" means "already switched to x2APIC mode when the OS boots". Only in the latter mode a kernel without CONFIG_X86_X2APIC will panic in validate_x2apic() in arch/x86/kernel/apic/apic.c . QEMU 4.2.1 and my Intel HP laptop (bought in 2019) use the "enabled" mode and the kernel does not panic. [1] "Re: [Qemu-devel] [Question] why x2apic's set by default without host sup" https://lists.gnu.org/archive/html/qemu-devel/2013-07/msg03527.html [2] Intel® 64 Architecture x2APIC Specification, ( https://www.naic.edu/~phil/software/intel/318148.pdf ) [3] Workload Tuning Guide for AMD EPYC ™ 7002 Series Processor Based Servers Application Note, https://developer.amd.com/wp-content/resources/56745_0.80.pdf [4] UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Gen10, ProLiant Gen10 Plus Servers and HPE Synergy: Enabling or disabling Processor x2APIC Support https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_enable_disable_x2APIC_support.html Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-1-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:43 +01:00
x86/Kconfig: Enable X86_X2APIC by default and improve help text As many current platforms (most modern Intel CPUs and QEMU) have x2APIC present, enable CONFIG_X86_X2APIC by default as it gives performance and functionality benefits. Additionally, if the BIOS has already switched APIC to x2APIC mode, but CONFIG_X86_X2APIC is disabled, the kernel will panic in arch/x86/kernel/apic/apic.c . Also improve the help text, which was confusing and really did not describe what the feature is about. Help text references and discussion: Both Intel [1] and AMD [3] spell the name as "x2APIC", not "x2apic". "It allows faster access to the local APIC" [2], chapter 2.1, page 15: "More efficient MSR interface to access APIC registers." "x2APIC was introduced in Intel CPUs around 2008": I was unable to find specific information which Intel CPUs support x2APIC. Wikipedia claims it was "introduced with the Nehalem microarchitecture in November 2008", but I was not able to confirm this independently. At least some Nehalem CPUs do not support x2APIC [1]. The documentation [2] is dated June 2008. Linux kernel also introduced x2APIC support in 2008, so the year seems to be right. "and in AMD EPYC CPUs in 2019": [3], page 15: "AMD introduced an x2APIC in our EPYC 7002 Series processors for the first time." "It is also frequently emulated in virtual machines, even when the host CPU does not support it." [1] "If this configuration option is disabled, the kernel will not boot on some platforms that have x2APIC enabled." According to some BIOS documentation [4], the x2APIC may be "disabled", "enabled", or "force enabled" on this system. I think that "enabled" means "made available to the operating system, but not already turned on" and "force enabled" means "already switched to x2APIC mode when the OS boots". Only in the latter mode a kernel without CONFIG_X86_X2APIC will panic in validate_x2apic() in arch/x86/kernel/apic/apic.c . QEMU 4.2.1 and my Intel HP laptop (bought in 2019) use the "enabled" mode and the kernel does not panic. [1] "Re: [Qemu-devel] [Question] why x2apic's set by default without host sup" https://lists.gnu.org/archive/html/qemu-devel/2013-07/msg03527.html [2] Intel® 64 Architecture x2APIC Specification, ( https://www.naic.edu/~phil/software/intel/318148.pdf ) [3] Workload Tuning Guide for AMD EPYC ™ 7002 Series Processor Based Servers Application Note, https://developer.amd.com/wp-content/resources/56745_0.80.pdf [4] UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Gen10, ProLiant Gen10 Plus Servers and HPE Synergy: Enabling or disabling Processor x2APIC Support https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_enable_disable_x2APIC_support.html Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-1-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:43 +01:00
2022-08-16 16:19:42 -07:00
2022-08-16 16:19:42 -07:00
x86/resctrl: Rename the config option INTEL_RDT to RESCTRL The resource control feature is supported by both Intel and AMD. So, rename CONFIG_INTEL_RDT to the vendor-neutral CONFIG_RESCTRL. Now CONFIG_RESCTRL will be used for both Intel and AMD to enable Resource Control support. Update the texts in config and condition accordingly. [ bp: Simplify Kconfig text. ] Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: "Chang S. Bae" <chang.seok.bae@intel.com> Cc: David Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Safonov <dima@arista.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <linux-doc@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pu Wen <puwen@hygon.cn> Cc: <qianyue.zj@alibaba-inc.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Rian Hunter <rian@alum.mit.edu> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: <xiaochen.shen@intel.com> Link: https://lkml.kernel.org/r/20181121202811.4492-9-babu.moger@amd.com
2018-11-21 20:28:39 +00:00
x86/resctrl: Rename the config option INTEL_RDT to RESCTRL The resource control feature is supported by both Intel and AMD. So, rename CONFIG_INTEL_RDT to the vendor-neutral CONFIG_RESCTRL. Now CONFIG_RESCTRL will be used for both Intel and AMD to enable Resource Control support. Update the texts in config and condition accordingly. [ bp: Simplify Kconfig text. ] Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: "Chang S. Bae" <chang.seok.bae@intel.com> Cc: David Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Safonov <dima@arista.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <linux-doc@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pu Wen <puwen@hygon.cn> Cc: <qianyue.zj@alibaba-inc.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Rian Hunter <rian@alum.mit.edu> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: <xiaochen.shen@intel.com> Link: https://lkml.kernel.org/r/20181121202811.4492-9-babu.moger@amd.com
2018-11-21 20:28:39 +00:00
x86/resctrl: Discover hardware telemetry events Each CPU collects data for telemetry events that it sends to the nearest telemetry event aggregator either when the value of MSR_IA32_PQR_ASSOC.RMID changes, or when a two millisecond timer expires. There is a feature type ("energy" or "perf"), GUID, and MMIO region associated with each aggregator. This combination links to an XML description of the set of telemetry events tracked by the aggregator. XML files are published by Intel in a GitHub repository¹. The telemetry event aggregators maintain per-RMID per-event counts of the total seen for all the CPUs. There may be multiple telemetry event aggregators per package. There are separate sets of aggregators for each feature type. Aggregators in a set may have different GUIDs. All aggregators with the same feature type and GUID are symmetric keeping counts for the same set of events for the CPUs that provide data to them. The XML file for each aggregator provides the following information: 0) Feature type of the events ("perf" or "energy") 1) Which telemetry events are tracked by the aggregator. 2) The order in which the event counters appear for each RMID. 3) The value type of each event counter (integer or fixed-point). 4) The number of RMIDs supported. 5) Which additional aggregator status registers are included. 6) The total size of the MMIO region for an aggregator. Introduce struct event_group that condenses the relevant information from an XML file. Hereafter an "event group" refers to a group of events of a particular feature type (event_group::pfname set to "energy" or "perf") with a particular GUID. Use event_group::pfname to determine the feature id needed to obtain the aggregator details. It will later be used in console messages and with the rdt= boot parameter. The INTEL_PMT_TELEMETRY driver enumerates support for telemetry events. This driver provides intel_pmt_get_regions_by_feature() to list all available telemetry event aggregators of a given feature type. The list includes the "guid", the base address in MMIO space for the region where the event counters are exposed, and the package id where the all the CPUs that report to this aggregator are located. Call INTEL_PMT_TELEMETRY's intel_pmt_get_regions_by_feature() for each event group to obtain a private copy of that event group's aggregator data. Duplicate the aggregator data between event groups that have the same feature type but different GUID. Further processing on this private copy will be unique to the event group. ¹https://github.com/intel/Intel-PMT [ bp: Zap text explaining the code, s/guid/GUID/g ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
2026-01-08 09:42:26 -08:00
x86/resctrl: Discover hardware telemetry events Each CPU collects data for telemetry events that it sends to the nearest telemetry event aggregator either when the value of MSR_IA32_PQR_ASSOC.RMID changes, or when a two millisecond timer expires. There is a feature type ("energy" or "perf"), GUID, and MMIO region associated with each aggregator. This combination links to an XML description of the set of telemetry events tracked by the aggregator. XML files are published by Intel in a GitHub repository¹. The telemetry event aggregators maintain per-RMID per-event counts of the total seen for all the CPUs. There may be multiple telemetry event aggregators per package. There are separate sets of aggregators for each feature type. Aggregators in a set may have different GUIDs. All aggregators with the same feature type and GUID are symmetric keeping counts for the same set of events for the CPUs that provide data to them. The XML file for each aggregator provides the following information: 0) Feature type of the events ("perf" or "energy") 1) Which telemetry events are tracked by the aggregator. 2) The order in which the event counters appear for each RMID. 3) The value type of each event counter (integer or fixed-point). 4) The number of RMIDs supported. 5) Which additional aggregator status registers are included. 6) The total size of the MMIO region for an aggregator. Introduce struct event_group that condenses the relevant information from an XML file. Hereafter an "event group" refers to a group of events of a particular feature type (event_group::pfname set to "energy" or "perf") with a particular GUID. Use event_group::pfname to determine the feature id needed to obtain the aggregator details. It will later be used in console messages and with the rdt= boot parameter. The INTEL_PMT_TELEMETRY driver enumerates support for telemetry events. This driver provides intel_pmt_get_regions_by_feature() to list all available telemetry event aggregators of a given feature type. The list includes the "guid", the base address in MMIO space for the region where the event counters are exposed, and the package id where the all the CPUs that report to this aggregator are located. Call INTEL_PMT_TELEMETRY's intel_pmt_get_regions_by_feature() for each event group to obtain a private copy of that event group's aggregator data. Duplicate the aggregator data between event groups that have the same feature type but different GUID. Further processing on this private copy will be unique to the event group. ¹https://github.com/intel/Intel-PMT [ bp: Zap text explaining the code, s/guid/GUID/g ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
2026-01-08 09:42:26 -08:00
mm: introduce CONFIG_ARCH_HAS_LAZY_MMU_MODE Architectures currently opt in for implementing lazy_mmu helpers by defining __HAVE_ARCH_ENTER_LAZY_MMU_MODE. In preparation for introducing a generic lazy_mmu layer that will require storage in task_struct, let's switch to a cleaner approach: instead of defining a macro, select a CONFIG option. This patch introduces CONFIG_ARCH_HAS_LAZY_MMU_MODE and has each arch select it when it implements lazy_mmu helpers. __HAVE_ARCH_ENTER_LAZY_MMU_MODE is removed and <linux/pgtable.h> relies on the new CONFIG instead. On x86, lazy_mmu helpers are only implemented if PARAVIRT_XXL is selected. This creates some complications in arch/x86/boot/, because a few files manually undefine PARAVIRT* options. As a result <asm/paravirt.h> does not define the lazy_mmu helpers, but this breaks the build as <linux/pgtable.h> only defines them if !CONFIG_ARCH_HAS_LAZY_MMU_MODE. There does not seem to be a clean way out of this - let's just undefine that new CONFIG too. Link: https://lkml.kernel.org/r/20251215150323.2218608-7-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Juegren Gross <jgross@suse.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-15 15:03:15 +00:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86/tdx: Fix arch_safe_halt() execution for TDX VMs Direct HLT instruction execution causes #VEs for TDX VMs which is routed to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE handler will enable interrupts before TDCALL is routed to hypervisor leading to missed wakeup events, as current TDX spec doesn't expose interruptibility state information to allow #VE handler to selectively enable interrupts. Commit bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests") prevented the idle routines from executing HLT instruction in STI-shadow. But it missed the paravirt routine which can be reached via this path as an example: kvm_wait() => safe_halt() => raw_safe_halt() => arch_safe_halt() => irq.safe_halt() => pv_native_safe_halt() To reliably handle arch_safe_halt() for TDX VMs, introduce explicit dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt() routines with TDX-safe versions that execute direct TDCALL and needed interrupt flag updates. Executing direct TDCALL brings in additional benefit of avoiding HLT related #VEs altogether. As tested by Ryan Afranji: "Tested with the specjbb2015 benchmark. It has heavy lock contention which leads to many halt calls. TDX VMs suffered a poor score before this patchset. Verified the major performance improvement with this patchset applied." Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests") Signed-off-by: Vishal Annapurve <vannapurve@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Ryan Afranji <afranji@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250228014416.3925664-3-vannapurve@google.com
2025-02-28 01:44:15 +00:00
x86/mm: Make DMA memory shared for TD guest Intel TDX doesn't allow VMM to directly access guest private memory. Any memory that is required for communication with the VMM must be shared explicitly. The same rule applies for any DMA to and from the TDX guest. All DMA pages have to be marked as shared pages. A generic way to achieve this without any changes to device drivers is to use the SWIOTLB framework. The previous patch ("Add support for TDX shared memory") gave TDX guests the _ability_ to make some pages shared, but did not make any pages shared. This actually marks SWIOTLB buffers *as* shared. Start returning true for cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) in TDX guests. This has several implications: - Allows the existing mem_encrypt_init() to be used for TDX which sets SWIOTLB buffers shared (aka. "decrypted"). - Ensures that all DMA is routed via the SWIOTLB mechanism (see pci_swiotlb_detect()) Stop selecting DYNAMIC_PHYSICAL_MASK directly. It will get set indirectly by selecting X86_MEM_ENCRYPT. mem_encrypt_init() is currently under an AMD-specific #ifdef. Move it to a generic area of the header. Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220405232939.73860-28-kirill.shutemov@linux.intel.com
2022-04-06 02:29:36 +03:00
x86/boot: Avoid #VE during boot for TDX platforms There are a few MSRs and control register bits that the kernel normally needs to modify during boot. But, TDX disallows modification of these registers to help provide consistent security guarantees. Fortunately, TDX ensures that these are all in the correct state before the kernel loads, which means the kernel does not need to modify them. The conditions to avoid are: * Any writes to the EFER MSR * Clearing CR4.MCE This theoretically makes the guest boot more fragile. If, for instance, EFER was set up incorrectly and a WRMSR was performed, it will trigger early exception panic or a triple fault, if it's before early exceptions are set up. However, this is likely to trip up the guest BIOS long before control reaches the kernel. In any case, these kinds of problems are unlikely to occur in production environments, and developers have good debug tools to fix them quickly. Change the common boot code to work on TDX and non-TDX systems. This should have no functional effect on non-TDX systems. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com
2022-04-06 02:29:32 +03:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/smp: Drop 32-bit "bigsmp" machine support The x86-32 kernel used to support multiple platforms with more than eight logical CPUs, from the 1999-2003 timeframe: Sequent NUMA-Q, IBM Summit, Unisys ES7000 and HP F8. Support for all except the latter was dropped back in 2014, leaving only the F8 based DL740 and DL760 G2 machines in this catery, with up to eight single-core Socket-603 Xeon-MP processors with hyperthreading. Like the already removed machines, the HP F8 servers at the time cost upwards of $100k in typical configurations, but were quickly obsoleted by their 64-bit Socket-604 cousins and the AMD Opteron. Earlier servers with up to 8 Pentium Pro or Xeon processors remain fully supported as they had no hyperthreading. Similarly, the more common 4-socket Xeon-MP machines with hyperthreading using Intel or ServerWorks chipsets continue to work without this, and all the multi-core Xeon processors also run 64-bit kernels. While the "bigsmp" support can also be used to run on later 64-bit machines (including VM guests), it seems best to discourage that and get any remaining users to update their kernels to 64-bit builds on these. As a side-effect of this, there is also no more need to support NUMA configurations on 32-bit x86, as all true 32-bit NUMA platforms are already gone. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-3-arnd@kernel.org
2025-02-26 22:37:06 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86/Kconfig: Further simplify the NR_CPUS config Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches: - Rename the three CONFIG_NR_CPUS related variables to create a common namespace for them: RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN RANGE_END_CPUS => NR_CPUS_RANGE_END DEF_CONFIG_CPUS => NR_CPUS_DEFAULT - Align them vertically, such as: config NR_CPUS_RANGE_END int depends on X86_64 default 8192 if SMP && ( MAXSMP || CPUMASK_OFFSTACK) default 512 if SMP && (!MAXSMP && !CPUMASK_OFFSTACK) default 1 if !SMP - Update help text, add more comments. Test results: # i386 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # i386 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 # i386 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=64 CONFIG_NR_CPUS_DEFAULT=32 CONFIG_NR_CPUS=32 # x86_64 allnoconfig: CONFIG_NR_CPUS_RANGE_BEGIN=1 CONFIG_NR_CPUS_RANGE_END=1 CONFIG_NR_CPUS_DEFAULT=1 CONFIG_NR_CPUS=1 # x86_64 defconfig: CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=64 # x86_64 allyesconfig: CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-10 12:36:29 +01:00
x86: Enable Intel Turbo Boost Max Technology 3.0 On platforms supporting Intel Turbo Boost Max Technology 3.0, the maximum turbo frequencies of some cores in a CPU package may be higher than for the other cores in the same package. In that case, better performance (and possibly lower energy consumption as well) can be achieved by making the scheduler prefer to run tasks on the CPUs with higher max turbo frequencies. To that end, set up a core priority metric to abstract the core preferences based on the maximum turbo frequency. In that metric, the cores with higher maximum turbo frequencies are higher-priority than the other cores in the same package and that causes the scheduler to favor them when making load-balancing decisions using the asymmertic packing approach. At the same time, the priority of SMT threads with a higher CPU number is reduced so as to avoid scheduling tasks on all of the threads that belong to a favored core before all of the other cores have been given a task to run. The priority metric will be initialized by the P-state driver with the help of the sched_set_itmt_core_prio() function. The P-state driver will also determine whether or not ITMT is supported by the platform and will call sched_set_itmt_support() to indicate that. Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org> Co-developed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: bp@suse.de Link: http://lkml.kernel.org/r/cd401ccdff88f88c8349314febdc25d51f7c48f7.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22 12:23:55 -08:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86/mm: Remove CONFIG_HIGHMEM64G support HIGHMEM64G support was added in linux-2.3.25 to support (then) high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of addressing, NUMA and PCI-X slots started appearing. I have found no evidence of this ever being used in regular dual-socket servers or consumer devices, all the users seem obsolete these days, even by i386 standards: - Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already removed ten years ago. - 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and ServerWorks ServerSet/GrandChampion could theoretically still work with 8GB, but these were exceptionally rare even 20 years ago and would have usually been equipped with than the maximum amount of RAM. - Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but could still work in a Socket 775 mainboard designed for the later Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed 64-bit CPUs. - The rare Xeon LV "Sossaman" came on a few motherboards with registered DDR2 memory support up to 16GB. - In the early days of x86-64 hardware, there was sometimes the need to run a 32-bit kernel to work around bugs in the hardware drivers, or in the syscall emulation for 32-bit userspace. This likely still works but there should never be a need for this any more. PAE mode is still required to get access to the 'NX' bit on Atom 'Pentium M' and 'Core Duo' CPUs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
2025-02-26 22:37:09 +01:00
x86/mm: Remove CONFIG_HIGHMEM64G support HIGHMEM64G support was added in linux-2.3.25 to support (then) high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of addressing, NUMA and PCI-X slots started appearing. I have found no evidence of this ever being used in regular dual-socket servers or consumer devices, all the users seem obsolete these days, even by i386 standards: - Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already removed ten years ago. - 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and ServerWorks ServerSet/GrandChampion could theoretically still work with 8GB, but these were exceptionally rare even 20 years ago and would have usually been equipped with than the maximum amount of RAM. - Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but could still work in a Socket 775 mainboard designed for the later Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed 64-bit CPUs. - The rare Xeon LV "Sossaman" came on a few motherboards with registered DDR2 memory support up to 16GB. - In the early days of x86-64 hardware, there was sometimes the need to run a 32-bit kernel to work around bugs in the hardware drivers, or in the syscall emulation for 32-bit userspace. This likely still works but there should never be a need for this any more. PAE mode is still required to get access to the 'NX' bit on Atom 'Pentium M' and 'Core Duo' CPUs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
2025-02-26 22:37:09 +01:00
x86/mm: Remove CONFIG_HIGHMEM64G support HIGHMEM64G support was added in linux-2.3.25 to support (then) high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of addressing, NUMA and PCI-X slots started appearing. I have found no evidence of this ever being used in regular dual-socket servers or consumer devices, all the users seem obsolete these days, even by i386 standards: - Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already removed ten years ago. - 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and ServerWorks ServerSet/GrandChampion could theoretically still work with 8GB, but these were exceptionally rare even 20 years ago and would have usually been equipped with than the maximum amount of RAM. - Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but could still work in a Socket 775 mainboard designed for the later Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed 64-bit CPUs. - The rare Xeon LV "Sossaman" came on a few motherboards with registered DDR2 memory support up to 16GB. - In the early days of x86-64 hardware, there was sometimes the need to run a 32-bit kernel to work around bugs in the hardware drivers, or in the syscall emulation for 32-bit userspace. This likely still works but there should never be a need for this any more. PAE mode is still required to get access to the 'NX' bit on Atom 'Pentium M' and 'Core Duo' CPUs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
2025-02-26 22:37:09 +01:00
x86/mm: Remove CONFIG_HIGHMEM64G support HIGHMEM64G support was added in linux-2.3.25 to support (then) high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of addressing, NUMA and PCI-X slots started appearing. I have found no evidence of this ever being used in regular dual-socket servers or consumer devices, all the users seem obsolete these days, even by i386 standards: - Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already removed ten years ago. - 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and ServerWorks ServerSet/GrandChampion could theoretically still work with 8GB, but these were exceptionally rare even 20 years ago and would have usually been equipped with than the maximum amount of RAM. - Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but could still work in a Socket 775 mainboard designed for the later Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed 64-bit CPUs. - The rare Xeon LV "Sossaman" came on a few motherboards with registered DDR2 memory support up to 16GB. - In the early days of x86-64 hardware, there was sometimes the need to run a 32-bit kernel to work around bugs in the hardware drivers, or in the syscall emulation for 32-bit userspace. This likely still works but there should never be a need for this any more. PAE mode is still required to get access to the 'NX' bit on Atom 'Pentium M' and 'Core Duo' CPUs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
2025-02-26 22:37:09 +01:00
x86/mm: Remove CONFIG_HIGHMEM64G support HIGHMEM64G support was added in linux-2.3.25 to support (then) high-end Pentium Pro and Pentium III Xeon servers with more than 4GB of addressing, NUMA and PCI-X slots started appearing. I have found no evidence of this ever being used in regular dual-socket servers or consumer devices, all the users seem obsolete these days, even by i386 standards: - Support for NUMA servers (NUMA-Q, IBM x440, unisys) was already removed ten years ago. - 4+ socket non-NUMA servers based on Intel 450GX/450NX, HP F8 and ServerWorks ServerSet/GrandChampion could theoretically still work with 8GB, but these were exceptionally rare even 20 years ago and would have usually been equipped with than the maximum amount of RAM. - Some SKUs of the Celeron D from 2004 had 64-bit mode fused off but could still work in a Socket 775 mainboard designed for the later Core 2 Duo and 8GB. Apparently most BIOSes at the time only allowed 64-bit CPUs. - The rare Xeon LV "Sossaman" came on a few motherboards with registered DDR2 memory support up to 16GB. - In the early days of x86-64 hardware, there was sometimes the need to run a 32-bit kernel to work around bugs in the hardware drivers, or in the syscall emulation for 32-bit userspace. This likely still works but there should never be a need for this any more. PAE mode is still required to get access to the 'NX' bit on Atom 'Pentium M' and 'Core Duo' CPUs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-6-arnd@kernel.org
2025-02-26 22:37:09 +01:00
x86/mm: Simplify enabling direct_gbpages direct_gbpages can be force enabled as an early parameter but not really have taken effect when DEBUG_PAGEALLOC or KMEMCHECK is enabled. You can also enable direct_gbpages right now if you have an x86_64 architecture but your CPU doesn't really have support for this feature. In both cases PG_LEVEL_1G won't actually be enabled but direct_gbpages is used in other areas under the assumptions that PG_LEVEL_1G was set. Fix this by putting together all requirements which make this feature sensible to enable under, and only enable both finally flipping on PG_LEVEL_1G and leaving PG_LEVEL_1G set when this is true. We only enable this feature then to be possible on sensible builds defined by the new ENABLE_DIRECT_GBPAGES. If the CPU has support for it you can either enable this by using the DIRECT_GBPAGES option or using the early kernel parameter. If a platform had support for this you can always force disable it as well. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: JBeulich@suse.com Cc: Jan Beulich <JBeulich@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: julia.lawall@lip6.fr Link: http://lkml.kernel.org/r/1425518654-3403-3-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-04 17:24:12 -08:00
x86/sev: Move common memory encryption code to mem_encrypt.c SEV and TDX both protect guest memory from host accesses. They both use guest physical address bits to communicate to the hardware which pages receive protection or not. SEV and TDX both assume that all I/O (real devices and virtio) must be performed to pages *without* protection. To add this support, AMD SEV code forces force_dma_unencrypted() to decrypt DMA pages when DMA pages were allocated for I/O. It also uses swiotlb_update_mem_attributes() to update decryption bits in SWIOTLB DMA buffers. Since TDX also uses a similar memory sharing design, all the above mentioned changes can be reused. So move force_dma_unencrypted(), SWIOTLB update code and virtio changes out of mem_encrypt_amd.c to mem_encrypt.c. Introduce a new config option X86_MEM_ENCRYPT that can be selected by platforms which use x86 memory encryption features (needed in both AMD SEV and Intel TDX guest platforms). Since the code is moved from mem_encrypt_amd.c, inherit the same make flags. This is preparation for enabling TDX memory encryption support and it has no functional changes. Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20211206135505.75045-4-kirill.shutemov@linux.intel.com
2021-12-06 16:55:05 +03:00
x86/mm: Add Secure Memory Encryption (SME) support Add support for Secure Memory Encryption (SME). This initial support provides a Kconfig entry to build the SME support into the kernel and defines the memory encryption mask that will be used in subsequent patches to mark pages as encrypted. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/a6c34d16caaed3bc3e2d6f0987554275bd291554.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:03 -05:00
x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol Turn ARCH_USE_MEMREMAP_PROT into a generic Kconfig symbol, and fix the dependency expression to reflect that AMD_MEM_ENCRYPT depends on it, instead of the other way around. This will permit ARCH_USE_MEMREMAP_PROT to be selected by other architectures. Note that the encryption related early memremap routines in arch/x86/mm/ioremap.c cannot be built for 32-bit x86 without triggering the following warning: arch/x86//mm/ioremap.c: In function 'early_memremap_encrypted': >> arch/x86/include/asm/pgtable_types.h:193:27: warning: conversion from 'long long unsigned int' to 'long unsigned int' changes value from '9223372036854776163' to '355' [-Woverflow] #define __PAGE_KERNEL_ENC (__PAGE_KERNEL | _PAGE_ENC) ^~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86//mm/ioremap.c:713:46: note: in expansion of macro '__PAGE_KERNEL_ENC' return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_ENC); which essentially means they are 64-bit only anyway. However, we cannot make them dependent on CONFIG_ARCH_HAS_MEM_ENCRYPT, since that is always defined, even for i386 (and changing that results in a slew of build errors) So instead, build those routines only if CONFIG_AMD_MEM_ENCRYPT is defined. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Alexander Graf <agraf@suse.de> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190202094119.13230-9-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-02 10:41:17 +01:00
x86/sev: Move common memory encryption code to mem_encrypt.c SEV and TDX both protect guest memory from host accesses. They both use guest physical address bits to communicate to the hardware which pages receive protection or not. SEV and TDX both assume that all I/O (real devices and virtio) must be performed to pages *without* protection. To add this support, AMD SEV code forces force_dma_unencrypted() to decrypt DMA pages when DMA pages were allocated for I/O. It also uses swiotlb_update_mem_attributes() to update decryption bits in SWIOTLB DMA buffers. Since TDX also uses a similar memory sharing design, all the above mentioned changes can be reused. So move force_dma_unencrypted(), SWIOTLB update code and virtio changes out of mem_encrypt_amd.c to mem_encrypt.c. Introduce a new config option X86_MEM_ENCRYPT that can be selected by platforms which use x86 memory encryption features (needed in both AMD SEV and Intel TDX guest platforms). Since the code is moved from mem_encrypt_amd.c, inherit the same make flags. This is preparation for enabling TDX memory encryption support and it has no functional changes. Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20211206135505.75045-4-kirill.shutemov@linux.intel.com
2021-12-06 16:55:05 +03:00
x86/mm: Add Secure Memory Encryption (SME) support Add support for Secure Memory Encryption (SME). This initial support provides a Kconfig entry to build the SME support into the kernel and defines the memory encryption mask that will be used in subsequent patches to mark pages as encrypted. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/a6c34d16caaed3bc3e2d6f0987554275bd291554.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:03 -05:00
x86/smp: Drop 32-bit "bigsmp" machine support The x86-32 kernel used to support multiple platforms with more than eight logical CPUs, from the 1999-2003 timeframe: Sequent NUMA-Q, IBM Summit, Unisys ES7000 and HP F8. Support for all except the latter was dropped back in 2014, leaving only the F8 based DL740 and DL760 G2 machines in this catery, with up to eight single-core Socket-603 Xeon-MP processors with hyperthreading. Like the already removed machines, the HP F8 servers at the time cost upwards of $100k in typical configurations, but were quickly obsoleted by their 64-bit Socket-604 cousins and the AMD Opteron. Earlier servers with up to 8 Pentium Pro or Xeon processors remain fully supported as they had no hyperthreading. Similarly, the more common 4-socket Xeon-MP machines with hyperthreading using Intel or ServerWorks chipsets continue to work without this, and all the multi-core Xeon processors also run 64-bit kernels. While the "bigsmp" support can also be used to run on later 64-bit machines (including VM guests), it seems best to discourage that and get any remaining users to update their kernels to 64-bit builds on these. As a side-effect of this, there is also no more need to support NUMA configurations on 32-bit x86, as all true 32-bit NUMA platforms are already gone. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250226213714.4040853-3-arnd@kernel.org
2025-02-26 22:37:06 +01:00
mm: percpu: generalize percpu related config Patch series "mm: percpu: Cleanup percpu first chunk function". When supporting page mapping percpu first chunk allocator on arm64, we found there are lots of duplicated codes in percpu embed/page first chunk allocator. This patchset is aimed to cleanup them and should no function change. The currently supported status about 'embed' and 'page' in Archs shows below, embed: NEED_PER_CPU_PAGE_FIRST_CHUNK page: NEED_PER_CPU_EMBED_FIRST_CHUNK embed page ------------------------ arm64 Y Y mips Y N powerpc Y Y riscv Y N sparc Y Y x86 Y Y ------------------------ There are two interfaces about percpu first chunk allocator, extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the pcpu_embed/page_first_chunk(). 1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be provided when archs supported NUMA. 2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too, a generic pcpu_populate_pte() which marked '__weak' is provided, if you need a different function to populate pte on the arch(like x86), please provide its own implementation. [1] https://github.com/kevin78/linux.git percpu-cleanup This patch (of 4): The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/ NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have duplicate definitions on platforms that subscribe it. Move them into mm, drop these redundant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19 18:07:41 -08:00
2013-07-19 11:47:48 -06:00
2013-07-19 11:47:48 -06:00
2013-07-19 11:47:48 -06:00
libnvdimm/e820: Retrieve and populate correct 'target_node' info Use the new phys_to_target_node() and numa_map_to_online_node() helpers to retrieve the correct id for the 'numa_node' ("local" / online initiator node) and 'target_node' (offline target memory node) sysfs attributes. Below is an example from a 4 NUMA node system where all the memory on node2 is pmem / reserved. It should be noted that with the arrival of the ACPI HMAT table and EFI Specific Purpose Memory the kernel will start to see more platforms with reserved / performance differentiated memory in its own NUMA node. Hence all the stakeholders on the Cc for what is ostensibly a libnvdimm local patch. === Before === /* Notice no online memory on node2 at start */ # numactl --hardware available: 3 nodes (0-1,3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 node 0 size: 3958 MB node 0 free: 3708 MB node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 node 1 size: 4027 MB node 1 free: 3871 MB node 3 cpus: node 3 size: 3994 MB node 3 free: 3971 MB node distances: node 0 1 3 0: 10 21 21 1: 21 10 21 3: 21 21 10 /* * Put the pmem namespace into devdax mode so it can be assigned to the * kmem driver */ # ndctl create-namespace -e namespace0.0 -m devdax -f { "dev":"namespace0.0", "mode":"devdax", "map":"dev", "size":"3.94 GiB (4.23 GB)", "uuid":"1650af9b-9ba3-4704-acd6-10178399d9a3", [..] } /* Online Persistent Memory as System RAM */ # daxctl reconfigure-device --mode=system-ram dax0.0 libdaxctl: memblock_in_dev: dax0.0: memory0: Unable to determine phys_index: Success libdaxctl: memblock_in_dev: dax0.0: memory0: Unable to determine phys_index: Success libdaxctl: memblock_in_dev: dax0.0: memory0: Unable to determine phys_index: Success libdaxctl: memblock_in_dev: dax0.0: memory0: Unable to determine phys_index: Success [ { "chardev":"dax0.0", "size":4225761280, "target_node":0, "mode":"system-ram" } ] reconfigured 1 device /* Note that the memory is onlined by default to the wrong node, node0 */ # numactl --hardware available: 3 nodes (0-1,3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 node 0 size: 7926 MB node 0 free: 7655 MB node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 node 1 size: 4027 MB node 1 free: 3871 MB node 3 cpus: node 3 size: 3994 MB node 3 free: 3971 MB node distances: node 0 1 3 0: 10 21 21 1: 21 10 21 3: 21 21 10 === After === /* Notice that the "phys_index" error messages are gone */ # daxctl reconfigure-device --mode=system-ram dax0.0 [ { "chardev":"dax0.0", "size":4225761280, "target_node":2, "mode":"system-ram" } ] reconfigured 1 device /* Notice that node2 is now correctly populated */ # numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 node 0 size: 3958 MB node 0 free: 3793 MB node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 node 1 size: 4027 MB node 1 free: 3851 MB node 2 cpus: node 2 size: 3968 MB node 2 free: 3968 MB node 3 cpus: node 3 size: 3994 MB node 3 free: 3908 MB node distances: node 0 1 2 3 0: 10 21 21 21 1: 21 10 21 21 2: 21 21 10 21 3: 21 21 21 10 Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/158188327614.894464.13122730362187722603.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-16 12:01:16 -08:00
x86: change MTRR_SANITIZER to def_bool y This option has been added in v2.6.26 as a default-disabled feature and went through several revisions since then. The feature fixes a wide range of MTRR setup problems that BIOSes leave us with: slow system, slow Xorg, slow system when adding lots of RAM, etc., so we want to enable it by default for v2.6.28. See: [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs http://bugzilla.kernel.org/show_bug.cgi?id=10508 and the test results in: http://lkml.org/lkml/2008/9/29/273 1. hpa reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC range0: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB hole: 000000013c000000 - 0000000140000000 Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC 2. Dylan Taft reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1 reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c8000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB hole: 00000000c7e00000 - 00000000c8000000 Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC rangeX: 0000000100000000 - 0000000130000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB 3. Gabriel reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M range0: 0000000000000000 - 00000000d0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB hole: 00000000cf600000 - 00000000cf800000 Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC rangeX: 0000000100000000 - 000000012c000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB 4. Mika Fischer reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC rangeX: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 16:29:40 -07:00
x86: change MTRR_SANITIZER to def_bool y This option has been added in v2.6.26 as a default-disabled feature and went through several revisions since then. The feature fixes a wide range of MTRR setup problems that BIOSes leave us with: slow system, slow Xorg, slow system when adding lots of RAM, etc., so we want to enable it by default for v2.6.28. See: [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs http://bugzilla.kernel.org/show_bug.cgi?id=10508 and the test results in: http://lkml.org/lkml/2008/9/29/273 1. hpa reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC range0: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB hole: 000000013c000000 - 0000000140000000 Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC 2. Dylan Taft reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1 reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c8000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB hole: 00000000c7e00000 - 00000000c8000000 Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC rangeX: 0000000100000000 - 0000000130000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB 3. Gabriel reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M range0: 0000000000000000 - 00000000d0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB hole: 00000000cf600000 - 00000000cf800000 Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC rangeX: 0000000100000000 - 000000012c000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB 4. Mika Fischer reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC rangeX: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 16:29:40 -07:00
x86/umip: Enable User-Mode Instruction Prevention at runtime User-Mode Instruction Prevention (UMIP) is enabled by setting/clearing a bit in %cr4. It makes sense to enable UMIP at some point while booting, before user spaces come up. Like SMAP and SMEP, is not critical to have it enabled very early during boot. This is because UMIP is relevant only when there is a user space to be protected from. Given these similarities, UMIP can be enabled along with SMAP and SMEP. At the moment, UMIP is disabled by default at build time. It can be enabled at build time by selecting CONFIG_X86_INTEL_UMIP. If enabled at build time, it can be disabled at run time by adding clearcpuid=514 to the kernel parameters. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-10-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05 18:27:54 -08:00
x86/sgx: Initialize metadata for Enclave Page Cache (EPC) sections Although carved out of normal DRAM, enclave memory is marked in the system memory map as reserved and is not managed by the core mm. There may be several regions spread across the system. Each contiguous region is called an Enclave Page Cache (EPC) section. EPC sections are enumerated via CPUID Enclave pages can only be accessed when they are mapped as part of an enclave, by a hardware thread running inside the enclave. Parse CPUID data, create metadata for EPC pages and populate a simple EPC page allocator. Although much smaller, ‘struct sgx_epc_page’ metadata is the SGX analog of the core mm ‘struct page’. Similar to how the core mm’s page->flags encode zone and NUMA information, embed the EPC section index to the first eight bits of sgx_epc_page->desc. This allows a quick reverse lookup from EPC page to EPC section. Existing client hardware supports only a single section, while upcoming server hardware will support at most eight sections. Thus, eight bits should be enough for long term needs. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Serge Ayoun <serge.ayoun@intel.com> Signed-off-by: Serge Ayoun <serge.ayoun@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-6-jarkko@kernel.org
2020-11-13 00:01:16 +02:00
2022-08-16 16:19:42 -07:00
x86/sgx: Initialize metadata for Enclave Page Cache (EPC) sections Although carved out of normal DRAM, enclave memory is marked in the system memory map as reserved and is not managed by the core mm. There may be several regions spread across the system. Each contiguous region is called an Enclave Page Cache (EPC) section. EPC sections are enumerated via CPUID Enclave pages can only be accessed when they are mapped as part of an enclave, by a hardware thread running inside the enclave. Parse CPUID data, create metadata for EPC pages and populate a simple EPC page allocator. Although much smaller, ‘struct sgx_epc_page’ metadata is the SGX analog of the core mm ‘struct page’. Similar to how the core mm’s page->flags encode zone and NUMA information, embed the EPC section index to the first eight bits of sgx_epc_page->desc. This allows a quick reverse lookup from EPC page to EPC section. Existing client hardware supports only a single section, while upcoming server hardware will support at most eight sections. Thus, eight bits should be enough for long term needs. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Serge Ayoun <serge.ayoun@intel.com> Signed-off-by: Serge Ayoun <serge.ayoun@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-6-jarkko@kernel.org
2020-11-13 00:01:16 +02:00
x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page() Background ========== SGX enclave memory is enumerated by the processor in contiguous physical ranges called Enclave Page Cache (EPC) sections. Currently, there is a free list per section, but allocations simply target the lowest-numbered sections. This is functional, but has no NUMA awareness. Fortunately, EPC sections are covered by entries in the ACPI SRAT table. These entries allow each EPC section to be associated with a NUMA node, just like normal RAM. Solution ======== Implement a NUMA-aware enclave page allocator. Mirror the buddy allocator and maintain a list of enclave pages for each NUMA node. Attempt to allocate enclave memory first from local nodes, then fall back to other nodes. Note that the fallback is not as sophisticated as the buddy allocator and is itself not aware of NUMA distances. When a node's free list is empty, it searches for the next-highest node with enclave pages (and will wrap if necessary). This could be improved in the future. Other ===== NUMA_KEEP_MEMINFO dependency is required for phys_to_target_node(). [ Kai Huang: Do not return NULL from __sgx_alloc_epc_page() because callers do not expect that and that leads to a NULL ptr deref. ] [ dhansen: Fix an uninitialized 'nid' variable in __sgx_alloc_epc_page() as Reported-by: kernel test robot <lkp@intel.com> to avoid any potential allocations from the wrong NUMA node or even premature allocation failures. ] Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/lkml/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com/ Link: https://lkml.kernel.org/r/20210319040602.178558-1-kai.huang@intel.com Link: https://lkml.kernel.org/r/20210318214933.29341-1-dave.hansen@intel.com Link: https://lkml.kernel.org/r/20210317235332.362001-2-jarkko.sakkinen@intel.com
2021-03-18 01:53:31 +02:00
x86/sgx: Add infrastructure to identify SGX EPC pages X86 machine check architecture reports a physical address when there is a memory error. Handling that error requires a method to determine whether the physical address reported is in any of the areas reserved for EPC pages by BIOS. SGX EPC pages do not have Linux "struct page" associated with them. Keep track of the mapping from ranges of EPC pages to the sections that contain them using an xarray. N.B. adds CONFIG_XARRAY_MULTI to the SGX dependecies. So "select" that in arch/x86/Kconfig for X86/SGX. Create a function arch_is_platform_page() that simply reports whether an address is an EPC page for use elsewhere in the kernel. The ACPI error injection code needs this function and is typically built as a module, so export it. Note that arch_is_platform_page() will be slower than other similar "what type is this page" functions that can simply check bits in the "struct page". If there is some future performance critical user of this function it may need to be implemented in a more efficient way. Note also that the current implementation of xarray allocates a few hundred kilobytes for this usage on a system with 4GB of SGX EPC memory configured. This isn't ideal, but worth it for the code simplicity. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/20211026220050.697075-3-tony.luck@intel.com
2021-10-26 15:00:45 -07:00
x86/sgx: Initialize metadata for Enclave Page Cache (EPC) sections Although carved out of normal DRAM, enclave memory is marked in the system memory map as reserved and is not managed by the core mm. There may be several regions spread across the system. Each contiguous region is called an Enclave Page Cache (EPC) section. EPC sections are enumerated via CPUID Enclave pages can only be accessed when they are mapped as part of an enclave, by a hardware thread running inside the enclave. Parse CPUID data, create metadata for EPC pages and populate a simple EPC page allocator. Although much smaller, ‘struct sgx_epc_page’ metadata is the SGX analog of the core mm ‘struct page’. Similar to how the core mm’s page->flags encode zone and NUMA information, embed the EPC section index to the first eight bits of sgx_epc_page->desc. This allows a quick reverse lookup from EPC page to EPC section. Existing client hardware supports only a single section, while upcoming server hardware will support at most eight sections. Thus, eight bits should be enough for long term needs. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Serge Ayoun <serge.ayoun@intel.com> Signed-off-by: Serge Ayoun <serge.ayoun@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Link: https://lkml.kernel.org/r/20201112220135.165028-6-jarkko@kernel.org
2020-11-13 00:01:16 +02:00
x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long. Fixes: 7fad2a432cd3 ("x86/shstk: Check that signal frame is shadow stack mem") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Reviewed-by: Thomas Gleixner <tglx@kernel.org> Cc: stable@vger.kernel.org
2026-04-09 11:43:30 -07:00
x86/virt/tdx: Wire up basic SEAMCALL functions Intel Trust Domain Extensions (TDX) protects guest VMs from malicious host and certain physical attacks. A CPU-attested software module called 'the TDX module' runs inside a new isolated memory range as a trusted hypervisor to manage and run protected VMs. TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This mode runs only the TDX module itself or other code to load the TDX module. The host kernel communicates with SEAM software via a new SEAMCALL instruction. This is conceptually similar to a guest->host hypercall, except it is made from the host to SEAM software instead. The TDX module establishes a new SEAMCALL ABI which allows the host to initialize the module and to manage VMs. The SEAMCALL ABI is very similar to the TDCALL ABI and leverages much TDCALL infrastructure. Wire up basic functions to make SEAMCALLs for the basic support of running TDX guests: __seamcall(), __seamcall_ret(), and __seamcall_saved_ret() for TDH.VP.ENTER. All SEAMCALLs involved in the basic TDX support don't use "callee-saved" registers as input and output, except the TDH.VP.ENTER. To start to support TDX, create a new arch/x86/virt/vmx/tdx/tdx.c for TDX host kernel support. Add a new Kconfig option CONFIG_INTEL_TDX_HOST to opt-in TDX host kernel support (to distinguish with TDX guest kernel support). So far only KVM uses TDX. Make the new config option depend on KVM_INTEL. Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Isaku Yamahata <isaku.yamahata@intel.com> Link: https://lore.kernel.org/all/4db7c3fc085e6af12acc2932294254ddb3d320b3.1692096753.git.kai.huang%40intel.com
2023-08-15 23:02:04 +12:00
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory Start to transit out the "multi-steps" to initialize the TDX module. TDX provides increased levels of memory confidentiality and integrity. This requires special hardware support for features like memory encryption and storage of memory integrity checksums. Not all memory satisfies these requirements. As a result, TDX introduced the concept of a "Convertible Memory Region" (CMR). During boot, the firmware builds a list of all of the memory ranges which can provide the TDX security guarantees. The list of these ranges is available to the kernel by querying the TDX module. CMRs tell the kernel which memory is TDX compatible. The kernel needs to build a list of memory regions (out of CMRs) as "TDX-usable" memory and pass them to the TDX module. Once this is done, those "TDX-usable" memory regions are fixed during module's lifetime. To keep things simple, assume that all TDX-protected memory will come from the page allocator. Make sure all pages in the page allocator *are* TDX-usable memory. As TDX-usable memory is a fixed configuration, take a snapshot of the memory configuration from memblocks at the time of module initialization (memblocks are modified on memory hotplug). This snapshot is used to enable TDX support for *this* memory configuration only. Use a memory hotplug notifier to ensure that no other RAM can be added outside of this configuration. This approach requires all memblock memory regions at the time of module initialization to be TDX convertible memory to work, otherwise module initialization will fail in a later SEAMCALL when passing those regions to the module. This approach works when all boot-time "system RAM" is TDX convertible memory and no non-TDX-convertible memory is hot-added to the core-mm before module initialization. For instance, on the first generation of TDX machines, both CXL memory and NVDIMM are not TDX convertible memory. Using kmem driver to hot-add any CXL memory or NVDIMM to the core-mm before module initialization will result in failure to initialize the module. The SEAMCALL error code will be available in the dmesg to help user to understand the failure. Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/all/20231208170740.53979-7-dave.hansen%40intel.com
2023-12-08 09:07:27 -08:00
x86/virt/tdx: Allocate and set up PAMTs for TDMRs The TDX module uses additional metadata to record things like which guest "owns" a given page of memory. This metadata, referred as Physical Address Metadata Table (PAMT), essentially serves as the 'struct page' for the TDX module. PAMTs are not reserved by hardware up front. They must be allocated by the kernel and then given to the TDX module during module initialization. TDX supports 3 page sizes: 4K, 2M, and 1G. Each "TD Memory Region" (TDMR) has 3 PAMTs to track the 3 supported page sizes. Each PAMT must be a physically contiguous area from a Convertible Memory Region (CMR). However, the PAMTs which track pages in one TDMR do not need to reside within that TDMR but can be anywhere in CMRs. If one PAMT overlaps with any TDMR, the overlapping part must be reported as a reserved area in that particular TDMR. Use alloc_contig_pages() since PAMT must be a physically contiguous area and it may be potentially large (~1/256th of the size of the given TDMR). The downside is alloc_contig_pages() may fail at runtime. One (bad) mitigation is to launch a TDX guest early during system boot to get those PAMTs allocated at early time, but the only way to fix is to add a boot option to allocate or reserve PAMTs during kernel boot. It is imperfect but will be improved on later. TDX only supports a limited number of reserved areas per TDMR to cover both PAMTs and memory holes within the given TDMR. If many PAMTs are allocated within a single TDMR, the reserved areas may not be sufficient to cover all of them. Adopt the following policies when allocating PAMTs for a given TDMR: - Allocate three PAMTs of the TDMR in one contiguous chunk to minimize the total number of reserved areas consumed for PAMTs. - Try to first allocate PAMT from the local node of the TDMR for better NUMA locality. Also dump out how many pages are allocated for PAMTs when the TDX module is initialized successfully. This helps answer the eternal "where did all my memory go?" questions. [ dhansen: merge in error handling cleanup ] Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/all/20231208170740.53979-11-dave.hansen%40intel.com
2023-12-08 09:07:31 -08:00
x86/virt/tdx: Make TDX host depend on X86_MCE A build failure was reported that when INTEL_TDX_HOST is enabled but X86_MCE is not, the tdx_dump_mce_info() function fails to link: ld: vmlinux.o: in function `tdx_dump_mce_info': ...: undefined reference to `mce_is_memory_error' ...: undefined reference to `mce_usable_address' The reason is in such configuration, despite there's no caller of tdx_dump_mce_info() it is still built and there's no implementation for the two "mce_*()" functions. Make INTEL_TDX_HOST depend on X86_MCE to fix. It makes sense to enable MCE support for the TDX host anyway. Because the only way that TDX has to report integrity errors is an MCE, and it is not good to silently ignore such MCE. The TDX spec also suggests the host VMM is expected to implement the MCE handler. Note it also makes sense to make INTEL_TDX_HOST select X86_MCE but this generates "recursive dependency detected!" error in the Kconfig. Closes: https://lore.kernel.org/all/20231212214612.GHZXjUpBFa1IwVMTI7@fat_crate.local/T/ Fixes: 70060463cb2b ("x86/mce: Differentiate real hardware #MCs from TDX erratum ones") Reported-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/all/20231212214612.GHZXjUpBFa1IwVMTI7@fat_crate.local/T/#m1a109c29324b2bbd0b3b1d45c218012cd3a13be6 Link: https://lore.kernel.org/all/20231213222825.286809-1-kai.huang%40intel.com
2023-12-14 11:28:25 +13:00
x86/virt/tdx: Wire up basic SEAMCALL functions Intel Trust Domain Extensions (TDX) protects guest VMs from malicious host and certain physical attacks. A CPU-attested software module called 'the TDX module' runs inside a new isolated memory range as a trusted hypervisor to manage and run protected VMs. TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This mode runs only the TDX module itself or other code to load the TDX module. The host kernel communicates with SEAM software via a new SEAMCALL instruction. This is conceptually similar to a guest->host hypercall, except it is made from the host to SEAM software instead. The TDX module establishes a new SEAMCALL ABI which allows the host to initialize the module and to manage VMs. The SEAMCALL ABI is very similar to the TDCALL ABI and leverages much TDCALL infrastructure. Wire up basic functions to make SEAMCALLs for the basic support of running TDX guests: __seamcall(), __seamcall_ret(), and __seamcall_saved_ret() for TDH.VP.ENTER. All SEAMCALLs involved in the basic TDX support don't use "callee-saved" registers as input and output, except the TDH.VP.ENTER. To start to support TDX, create a new arch/x86/virt/vmx/tdx/tdx.c for TDX host kernel support. Add a new Kconfig option CONFIG_INTEL_TDX_HOST to opt-in TDX host kernel support (to distinguish with TDX guest kernel support). So far only KVM uses TDX. Make the new config option depend on KVM_INTEL. Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Isaku Yamahata <isaku.yamahata@intel.com> Link: https://lore.kernel.org/all/4db7c3fc085e6af12acc2932294254ddb3d320b3.1692096753.git.kai.huang%40intel.com
2023-08-15 23:02:04 +12:00
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
x86/efi: Make the deprecated EFI handover protocol optional The EFI handover protocol permits a bootloader to invoke the kernel as a EFI PE/COFF application, while passing a bootparams struct as a third argument to the entrypoint function call. This has no basis in the UEFI specification, and there are better ways to pass additional data to a UEFI application (UEFI configuration tables, UEFI variables, UEFI protocols) than going around the StartImage() boot service and jumping to a fixed offset in the loaded image, just to call a different function that takes a third parameter. The reason for handling struct bootparams in the bootloader was that the EFI stub could only load initrd images from the EFI system partition, and so passing it via struct bootparams was needed for loaders like GRUB, which pass the initrd in memory, and may load it from anywhere, including from the network. Another motivation was EFI mixed mode, which could not use the initrd loader in the EFI stub at all due to 32/64 bit incompatibilities (which will be fixed shortly [0]), and could not invoke the ordinary PE/COFF entry point either, for the same reasons. Given that loaders such as GRUB already carried the bootparams handling in order to implement non-EFI boot, retaining that code and just passing bootparams to the EFI stub was a reasonable choice (although defining an alternate entrypoint could have been avoided.) However, the GRUB side changes never made it upstream, and are only shipped by some of the distros in their downstream versions. In the meantime, EFI support has been added to other Linux architecture ports, as well as to U-boot and systemd, including arch-agnostic methods for passing initrd images in memory [1], and for doing mixed mode boot [2], none of them requiring anything like the EFI handover protocol. So given that only out-of-tree distro GRUB relies on this, let's permit it to be omitted from the build, in preparation for retiring it completely at a later date. (Note that systemd-boot does have an implementation as well, but only uses it as a fallback for booting images that do not implement the LoadFile2 based initrd loading method, i.e., v5.8 or older) [0] https://lore.kernel.org/all/20220927085842.2860715-1-ardb@kernel.org/ [1] ec93fc371f01 ("efi/libstub: Add support for loading the initrd from a device path") [2] 97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20221122161017.2426828-18-ardb@kernel.org
2022-11-22 17:10:17 +01:00
kexec: fix KEXEC_FILE dependencies The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call"). [arnd@arndb.de: fix riscv build] Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-23 13:01:54 +02:00
kexec: create a new config option CONFIG_KEXEC_FILE for new syscall Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 15:18:46 -07:00
kexec: fix KEXEC_FILE dependencies The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call"). [arnd@arndb.de: fix riscv build] Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-23 13:01:54 +02:00
kexec_file: make use of purgatory optional Patch series "kexec_file, x86, powerpc: refactoring for other architecutres", v2. This is a preparatory patchset for adding kexec_file support on arm64. It was originally included in a arm64 patch set[1], but Philipp is also working on their kexec_file support on s390[2] and some changes are now conflicting. So these common parts were extracted and put into a separate patch set for better integration. What's more, my original patch#4 was split into a few small chunks for easier review after Dave's comment. As such, the resulting code is basically identical with my original, and the only *visible* differences are: - renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup() - change one of types of arguments at prepare_elf64_headers() Those, unfortunately, require a couple of trivial changes on the rest (#1, #6 to #13) of my arm64 kexec_file patch set[1]. Patch #1 allows making a use of purgatory optional, particularly useful for arm64. Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load, verify_sig}() and arch_kimage_file_post_load_cleanup() across architectures. Patches #3-#7 are also intended to generalize parse_elf64_headers(), along with exclude_mem_range(), to be made best re-use of. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html [2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html This patch (of 7): On arm64, crash dump kernel's usable memory is protected by *unmapping* it from kernel virtual space unlike other architectures where the region is just made read-only. It is highly unlikely that the region is accidentally corrupted and this observation rationalizes that digest check code can also be dropped from purgatory. The resulting code is so simple as it doesn't require a bit ugly re-linking/relocation stuff, i.e. arch_kexec_apply_relocations_add(). Please see: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html All that the purgatory does is to shuffle arguments and jump into a new kernel, while we still need to have some space for a hash value (purgatory_sha256_digest) which is never checked against. As such, it doesn't make sense to have trampline code between old kernel and new kernel on arm64. This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and allows related code to be compiled in only if necessary. [takahiro.akashi@linaro.org: fix trivial screwup] Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13 15:35:45 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
x86/Kconfig: enable kexec handover for 64 bits Add ARCH_SUPPORTS_KEXEC_HANDOVER for 64 bits to allow enabling of KEXEC_HANDOVER configuration option. Link: https://lkml.kernel.org/r/20250509074635.3187114-15-changyuanl@google.com Signed-off-by: Alexander Graf <graf@amazon.com> Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Co-developed-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anthony Yznaga <anthony.yznaga@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ashish Kalra <ashish.kalra@amd.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Gowans <jgowans@amazon.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Marc Rutland <mark.rutland@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pratyush Yadav <ptyadav@amazon.de> Cc: Rob Herring <robh@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-09 00:46:32 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
x86/crash: add x86 crash hotplug support When CPU or memory is hot un/plugged, or off/onlined, the crash elfcorehdr, which describes the CPUs and memory in the system, must also be updated. A new elfcorehdr is generated from the available CPUs and memory and replaces the existing elfcorehdr. The segment containing the elfcorehdr is identified at run-time in crash_core:crash_handle_hotplug_event(). No modifications to purgatory (see 'kexec: exclude elfcorehdr from the segment digest') or boot_params (as the elfcorehdr= capture kernel command line parameter pointer remains unchanged and correct) are needed, just elfcorehdr. For kexec_file_load(), the elfcorehdr segment size is based on NR_CPUS and CRASH_MAX_MEMORY_RANGES in order to accommodate a growing number of CPU and memory resources. For kexec_load(), the userspace kexec utility needs to size the elfcorehdr segment in the same/similar manner. To accommodate kexec_load() syscall in the absence of kexec_file_load() syscall support, prepare_elf_headers() and dependents are moved outside of CONFIG_KEXEC_FILE. [eric.devolder@oracle.com: correct unused function build error] Link: https://lkml.kernel.org/r/20230821182644.2143-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-6-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-14 17:44:43 -04:00
kexec jump This patch provides an enhancement to kexec/kdump. It implements the following features: - Backup/restore memory used by the original kernel before/after kexec. - Save/restore CPU state before/after kexec. The features of this patch can be used as a general method to call program in physical mode (paging turning off). This can be used to call BIOS code under Linux. kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 Usage example of calling some physical mode code and return: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_KEXEC=y CONFIG_PM=y CONFIG_KEXEC_JUMP=y 2. Build patched kexec-tool or download the pre-built one. 3. Build some physical mode executable named such as "phy_mode" 4. Boot kernel compiled in step 1. 5. Load physical mode executable with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context --args-none phy_mode 6. Call physical mode executable with following shell command line: /sbin/kexec -e Implementation point: To support jumping without reserving memory. One shadow backup page (source page) is allocated for each page used by kexeced code image (destination page). When do kexec_load, the image of kexeced code is loaded into source pages, and before executing, the destination pages and the source pages are swapped, so the contents of destination pages are backupped. Before jumping to the kexeced code image and after jumping back to the original kernel, the destination pages and the source pages are swapped too. C ABI (calling convention) is used as communication protocol between kernel and called code. A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to indicate that the loaded kernel image is used for jumping back. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 19:45:07 -07:00
kexec: split crashkernel reservation code out from crash_core.c Patch series "Split crash out from kexec and clean up related config items", v3. Motivation: ============= Previously, LKP reported a building error. When investigating, it can't be resolved reasonablly with the present messy kdump config items. https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/ The kdump (crash dumping) related config items could causes confusions: Firstly, CRASH_CORE enables codes including - crashkernel reservation; - elfcorehdr updating; - vmcoreinfo exporting; - crash hotplug handling; Now fadump of powerpc, kcore dynamic debugging and kdump all selects CRASH_CORE, while fadump - fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing global variable 'elfcorehdr_addr'; - kcore only needs vmcoreinfo exporting; - kdump needs all of the current kernel/crash_core.c. So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this mislead people that we enable crash dumping, actual it's not. Secondly, It's not reasonable to allow KEXEC_CORE select CRASH_CORE. Because KEXEC_CORE enables codes which allocate control pages, copy kexec/kdump segments, and prepare for switching. These codes are shared by both kexec reboot and kdump. We could want kexec reboot, but disable kdump. In that case, CRASH_CORE should not be selected. -------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y --------------------- Thirdly, It's not reasonable to allow CRASH_DUMP select KEXEC_CORE. That could make KEXEC_CORE, CRASH_DUMP are enabled independently from KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE code built in doesn't make any sense because no kernel loading or switching will happen to utilize the KEXEC_CORE code. --------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y --------------------- In this case, what is worse, on arch sh and arm, KEXEC relies on MMU, while CRASH_DUMP can still be enabled when !MMU, then compiling error is seen as the lkp test robot reported in above link. ------arch/sh/Kconfig------ config ARCH_SUPPORTS_KEXEC def_bool MMU config ARCH_SUPPORTS_CRASH_DUMP def_bool BROKEN_ON_SMP --------------------------- Changes: =========== 1, split out crash_reserve.c from crash_core.c; 2, split out vmcore_infoc. from crash_core.c; 3, move crash related codes in kexec_core.c into crash_core.c; 4, remove dependency of FA_DUMP on CRASH_DUMP; 5, clean up kdump related config items; 6, wrap up crash codes in crash related ifdefs on all 8 arch-es which support crash dumping, except of ppc; Achievement: =========== With above changes, I can rearrange the config item logic as below (the right item depends on or is selected by the left item): PROC_KCORE -----------> VMCORE_INFO |----------> VMCORE_INFO FA_DUMP----| |----------> CRASH_RESERVE ---->VMCORE_INFO / |---->CRASH_RESERVE KEXEC --| /| |--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE KEXEC_FILE --| \ | \---->CRASH_HOTPLUG KEXEC --| |--> KEXEC_CORE (for kexec reboot only) KEXEC_FILE --| Test ======== On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips, riscv, loongarch, I did below three cases of config item setting and building all passed. Take configs on x86_64 as exampmle here: (1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump items are unset automatically: # Kexec and crash features # CONFIG_KEXEC is not set # CONFIG_KEXEC_FILE is not set # end of Kexec and crash features (2) set CONFIG_KEXEC_FILE and 'make olddefconfig': --------------- # Kexec and crash features CONFIG_CRASH_RESERVE=y CONFIG_VMCORE_INFO=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y CONFIG_CRASH_MAX_MEMORY_RANGES=8192 # end of Kexec and crash features --------------- (3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig': ------------------------ # Kexec and crash features CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y # end of Kexec and crash features ------------------------ Note: For ppc, it needs investigation to make clear how to split out crash code in arch folder. Hope Hari and Pingfan can help have a look, see if it's doable. Now, I make it either have both kexec and crash enabled, or disable both of them altogether. This patch (of 14): Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the relevant codes into separate files: crash_reserve.c, include/linux/crash_reserve.h. And also add config item CRASH_RESERVE to control its enabling of the codes. And update config items which has relationship with crashkernel reservation. And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE when those scopes are only crashkernel reservation related. And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on arm64, x86 and risc-v because those architectures' crash_core.h is only related to crashkernel reservation. [akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin] Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-24 13:12:41 +08:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Add memory hotplug support for KASLR memory randomization Add a new option (CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING) to define the padding used for the physical memory mapping section when KASLR memory is enabled. It ensures there is enough virtual address space when CONFIG_MEMORY_HOTPLUG is used. The default value is 10 terabytes. If CONFIG_MEMORY_HOTPLUG is not used, no space is reserved increasing the entropy available. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-10-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:06 -07:00
x86/mm: Add memory hotplug support for KASLR memory randomization Add a new option (CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING) to define the padding used for the physical memory mapping section when KASLR memory is enabled. It ensures there is enough virtual address space when CONFIG_MEMORY_HOTPLUG is used. The default value is 10 terabytes. If CONFIG_MEMORY_HOTPLUG is not used, no space is reserved increasing the entropy available. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-10-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:06 -07:00
x86/mm: Add memory hotplug support for KASLR memory randomization Add a new option (CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING) to define the padding used for the physical memory mapping section when KASLR memory is enabled. It ensures there is enough virtual address space when CONFIG_MEMORY_HOTPLUG is used. The default value is 10 terabytes. If CONFIG_MEMORY_HOTPLUG is not used, no space is reserved increasing the entropy available. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-10-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:06 -07:00
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88 Calling core::fmt::write() from rust code while FineIBT is enabled results in a kernel panic: [ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132! [ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599 [ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE [ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0 ... [ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20 [ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7 [ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246 [ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88 [ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070 [ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8 [ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000 [ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10 [ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250 This happens because core::fmt::write() calls core::fmt::rt::Argument::fmt(), which currently has CFI disabled: library/core/src/fmt/rt.rs: 171 // FIXME: Transmuting formatter in new and indirectly branching to/calling 172 // it here is an explicit CFI violation. 173 #[allow(inline_no_sanitize)] 174 #[no_sanitize(cfi, kcfi)] 175 #[inline] 176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result { This causes a Control Protection exception, because FineIBT has sealed off the original function's endbr64. This makes rust currently incompatible with FineIBT. Add a Kconfig dependency that prevents FineIBT from getting turned on by default if rust is enabled. [ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1], and thus we relaxed the condition with Rust >= 1.88. When `objtool` lands checking for this with e.g. [2], the plan is to ideally run that in upstream Rust's CI to prevent regressions early [3], since we do not control `core`'s source code. Alice tested the Rust PR backported to an older compiler. Peter would like that Rust provides a stable `core` which can be pulled into the kernel: "Relying on that much out of tree code is 'unfortunate'". - Miguel ] Signed-off-by: Paweł Anikiel <panikiel@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://github.com/rust-lang/rust/pull/139632 [1] Link: https://lore.kernel.org/rust-for-linux/20250410154556.GB9003@noisy.programming.kicks-ass.net/ [2] Link: https://github.com/rust-lang/rust/pull/139632#issuecomment-2801950873 [3] Link: https://lore.kernel.org/r/20250410115420.366349-1-panikiel@google.com Link: https://lore.kernel.org/r/att0-CANiq72kjDM0cKALVy4POEzhfdT4nO7tqz0Pm7xM+3=_0+L1t=A@mail.gmail.com [ Reduced splat. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-04-10 11:54:20 +00:00
x86/ibt: Implement FineIBT-BHI mitigation While WAIT_FOR_ENDBR is specified to be a full speculation stop; it has been shown that some implementations are 'leaky' to such an extend that speculation can escape even the FineIBT preamble. To deal with this, add additional hardening to the FineIBT preamble. Notably, using a new LLVM feature: https://github.com/llvm/llvm-project/commit/e223485c9b38a5579991b8cebb6a200153eee245 which encodes the number of arguments in the kCFI preamble's register. Using this register<->arity mapping, have the FineIBT preamble CALL into a stub clobbering the relevant argument registers in the speculative case. Scott sayeth thusly: Microarchitectural attacks such as Branch History Injection (BHI) and Intra-mode Branch Target Injection (IMBTI) [1] can cause an indirect call to mispredict to an adversary-influenced target within the same hardware domain (e.g., within the kernel). Instructions at the mispredicted target may execute speculatively and potentially expose kernel data (e.g., to a user-mode adversary) through a microarchitectural covert channel such as CPU cache state. CET-IBT [2] is a coarse-grained control-flow integrity (CFI) ISA extension that enforces that each indirect call (or indirect jump) must land on an ENDBR (end branch) instruction, even speculatively*. FineIBT is a software technique that refines CET-IBT by associating each function type with a 32-bit hash and enforcing (at the callee) that the hash of the caller's function pointer type matches the hash of the callee's function type. However, recent research [3] has demonstrated that the conditional branch that enforces FineIBT's hash check can be coerced to mispredict, potentially allowing an adversary to speculatively bypass the hash check: __cfi_foo: ENDBR64 SUB R10d, 0x01234567 JZ foo # Even if the hash check fails and ZF=0, this branch could still mispredict as taken UD2 foo: ... The techniques demonstrated in [3] require the attacker to be able to control the contents of at least one live register at the mispredicted target. Therefore, this patch set introduces a sequence of CMOV instructions at each indirect-callable target that poisons every live register with data that the attacker cannot control whenever the FineIBT hash check fails, thus mitigating any potential attack. The security provided by this scheme has been discussed in detail on an earlier thread [4]. [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html [2] Intel Software Developer's Manual, Volume 1, Chapter 18 [3] https://www.vusec.net/projects/native-bhi/ [4] https://lore.kernel.org/lkml/20240927194925.707462984@infradead.org/ *There are some caveats for certain processors, see [1] for more info Suggested-by: Scott Constable <scott.d.constable@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250224124200.820402212@infradead.org
2025-02-24 13:37:12 +01:00
x86/ibt: Implement FineIBT Implement an alternative CFI scheme that merges both the fine-grained nature of kCFI but also takes full advantage of the coarse grained hardware CFI as provided by IBT. To contrast: kCFI is a pure software CFI scheme and relies on being able to read text -- specifically the instruction *before* the target symbol, and does the hash validation *before* doing the call (otherwise control flow is compromised already). FineIBT is a software and hardware hybrid scheme; by ensuring every branch target starts with a hash validation it is possible to place the hash validation after the branch. This has several advantages: o the (hash) load is avoided; no memop; no RX requirement. o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing the hash validation in the immediate instruction after the branch target there is a minimal speculation window and the whole is a viable defence against SpectreBHB. o Kees feels obliged to mention it is slightly more vulnerable when the attacker can write code. Obviously this patch relies on kCFI, but additionally it also relies on the padding from the call-depth-tracking patches. It uses this padding to place the hash-validation while the call-sites are re-written to modify the indirect target to be 16 bytes in front of the original target, thus hitting this new preamble. Notably, there is no hardware that needs call-depth-tracking (Skylake) and supports IBT (Tigerlake and onwards). Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
2022-10-27 11:28:14 +02:00
x86/ibt: Implement FineIBT Implement an alternative CFI scheme that merges both the fine-grained nature of kCFI but also takes full advantage of the coarse grained hardware CFI as provided by IBT. To contrast: kCFI is a pure software CFI scheme and relies on being able to read text -- specifically the instruction *before* the target symbol, and does the hash validation *before* doing the call (otherwise control flow is compromised already). FineIBT is a software and hardware hybrid scheme; by ensuring every branch target starts with a hash validation it is possible to place the hash validation after the branch. This has several advantages: o the (hash) load is avoided; no memop; no RX requirement. o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing the hash validation in the immediate instruction after the branch target there is a minimal speculation window and the whole is a viable defence against SpectreBHB. o Kees feels obliged to mention it is slightly more vulnerable when the attacker can write code. Obviously this patch relies on kCFI, but additionally it also relies on the padding from the call-depth-tracking patches. It uses this padding to place the hash-validation while the call-sites are re-written to modify the indirect target to be 16 bytes in front of the original target, thus hitting this new preamble. Notably, there is no hardware that needs call-depth-tracking (Skylake) and supports IBT (Tigerlake and onwards). Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
2022-10-27 11:28:14 +02:00
x86/ibt: Implement FineIBT-BHI mitigation While WAIT_FOR_ENDBR is specified to be a full speculation stop; it has been shown that some implementations are 'leaky' to such an extend that speculation can escape even the FineIBT preamble. To deal with this, add additional hardening to the FineIBT preamble. Notably, using a new LLVM feature: https://github.com/llvm/llvm-project/commit/e223485c9b38a5579991b8cebb6a200153eee245 which encodes the number of arguments in the kCFI preamble's register. Using this register<->arity mapping, have the FineIBT preamble CALL into a stub clobbering the relevant argument registers in the speculative case. Scott sayeth thusly: Microarchitectural attacks such as Branch History Injection (BHI) and Intra-mode Branch Target Injection (IMBTI) [1] can cause an indirect call to mispredict to an adversary-influenced target within the same hardware domain (e.g., within the kernel). Instructions at the mispredicted target may execute speculatively and potentially expose kernel data (e.g., to a user-mode adversary) through a microarchitectural covert channel such as CPU cache state. CET-IBT [2] is a coarse-grained control-flow integrity (CFI) ISA extension that enforces that each indirect call (or indirect jump) must land on an ENDBR (end branch) instruction, even speculatively*. FineIBT is a software technique that refines CET-IBT by associating each function type with a 32-bit hash and enforcing (at the callee) that the hash of the caller's function pointer type matches the hash of the callee's function type. However, recent research [3] has demonstrated that the conditional branch that enforces FineIBT's hash check can be coerced to mispredict, potentially allowing an adversary to speculatively bypass the hash check: __cfi_foo: ENDBR64 SUB R10d, 0x01234567 JZ foo # Even if the hash check fails and ZF=0, this branch could still mispredict as taken UD2 foo: ... The techniques demonstrated in [3] require the attacker to be able to control the contents of at least one live register at the mispredicted target. Therefore, this patch set introduces a sequence of CMOV instructions at each indirect-callable target that poisons every live register with data that the attacker cannot control whenever the FineIBT hash check fails, thus mitigating any potential attack. The security provided by this scheme has been discussed in detail on an earlier thread [4]. [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html [2] Intel Software Developer's Manual, Volume 1, Chapter 18 [3] https://www.vusec.net/projects/native-bhi/ [4] https://lore.kernel.org/lkml/20240927194925.707462984@infradead.org/ *There are some caveats for certain processors, see [1] for more info Suggested-by: Scott Constable <scott.d.constable@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250224124200.820402212@infradead.org
2025-02-24 13:37:12 +01:00
x86/ibt: Implement FineIBT Implement an alternative CFI scheme that merges both the fine-grained nature of kCFI but also takes full advantage of the coarse grained hardware CFI as provided by IBT. To contrast: kCFI is a pure software CFI scheme and relies on being able to read text -- specifically the instruction *before* the target symbol, and does the hash validation *before* doing the call (otherwise control flow is compromised already). FineIBT is a software and hardware hybrid scheme; by ensuring every branch target starts with a hash validation it is possible to place the hash validation after the branch. This has several advantages: o the (hash) load is avoided; no memop; no RX requirement. o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing the hash validation in the immediate instruction after the branch target there is a minimal speculation window and the whole is a viable defence against SpectreBHB. o Kees feels obliged to mention it is slightly more vulnerable when the attacker can write code. Obviously this patch relies on kCFI, but additionally it also relies on the padding from the call-depth-tracking patches. It uses this padding to place the hash-validation while the call-sites are re-written to modify the indirect target to be 16 bytes in front of the original target, thus hitting this new preamble. Notably, there is no hardware that needs call-depth-tracking (Skylake) and supports IBT (Tigerlake and onwards). Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
2022-10-27 11:28:14 +02:00
cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. Fixes: f337a6a21e2f ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n") Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
2024-04-19 17:05:54 -07:00
cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. Fixes: f337a6a21e2f ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n") Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
2024-04-19 17:05:54 -07:00
cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. Fixes: f337a6a21e2f ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n") Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
2024-04-19 17:05:54 -07:00
x86/cpu/kvm: SRSO: Fix possible missing IBPB on VM-Exit In [1] the meaning of the synthetic IBPB flags has been redefined for a better separation of concerns: - ENTRY_IBPB -- issue IBPB on entry only - IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only and the Retbleed mitigations have been updated to match this new semantics. Commit [2] was merged shortly before [1], and their interaction was not handled properly. This resulted in IBPB not being triggered on VM-Exit in all SRSO mitigation configs requesting an IBPB there. Specifically, an IBPB on VM-Exit is triggered only when X86_FEATURE_IBPB_ON_VMEXIT is set. However: - X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb", because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence, an IBPB is triggered on entry but the expected IBPB on VM-exit is not. - X86_FEATURE_IBPB_ON_VMEXIT is not set also when "spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is already set. That's because before [1] this was effectively redundant. Hence, e.g. a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly reports the machine still vulnerable to SRSO, despite an IBPB being triggered both on entry and VM-Exit, because of the Retbleed selected mitigation config. - UNTRAIN_RET_VM won't still actually do anything unless CONFIG_MITIGATION_IBPB_ENTRY is set. For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation option similar to the one for 'retbleed=ibpb', thus re-order the code for the RETBLEED_MITIGATION_IBPB option to be less confusing by having all features enabling before the disabling of the not needed ones. For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard, since none of the SRSO compile cruft is required in this configuration. Also, check only that the required microcode is present to effectively enabled the IBPB on VM-Exit. Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY to list also all SRSO config settings enabled by this guard. Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1] Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2] Reported-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Patrick Bellasi <derkling@google.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-02-05 14:04:41 +00:00
mm/memory_hotplug: introduce add_pages There are new users of memory hotplug emerging. Some of them require different subset of arch_add_memory. There are some which only require allocation of struct pages without mapping those pages to the kernel address space. We currently have __add_pages for that purpose. But this is rather lowlevel and not very suitable for the code outside of the memory hotplug. E.g. x86_64 wants to update max_pfn which should be done by the caller. Introduce add_pages() which should care about those details if they are needed. Each architecture should define its implementation and select CONFIG_ARCH_HAS_ADD_PAGES. All others use the currently existing __add_pages. Link: http://lkml.kernel.org/r/20170817000548.32038-7-jglisse@redhat.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 16:11:39 -07:00
mm/memory_hotplug: introduce add_pages There are new users of memory hotplug emerging. Some of them require different subset of arch_add_memory. There are some which only require allocation of struct pages without mapping those pages to the kernel address space. We currently have __add_pages for that purpose. But this is rather lowlevel and not very suitable for the code outside of the memory hotplug. E.g. x86_64 wants to update max_pfn which should be done by the caller. Introduce add_pages() which should care about those details if they are needed. Each architecture should define its implementation and select CONFIG_ARCH_HAS_ADD_PAGES. All others use the currently existing __add_pages. Link: http://lkml.kernel.org/r/20170817000548.32038-7-jglisse@redhat.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 16:11:39 -07:00
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32 I was unable to find a good description of the ServerWorks CNB20LE chipset. However, it was probably exclusively used with the Pentium III processor (this CPU model was used in all references to it that I found where the CPU model was provided: dmesgs in [1] and [2]; [3] page 2; [4]-[7]). As is widely known, the Pentium III processor did not support the 64-bit mode, support for which was introduced by Intel a couple of years later. So it is safe to assume that no systems with the CNB20LE chipset have amd64 and the CONFIG_PCI_CNB20LE_QUIRK may now depend on X86_32. Additionally, I have determined that most computers with the CNB20LE chipset did have ACPI support and this driver was inactive on them. I have submitted a patch to remove this driver, but it was met with resistance [8]. [1] Jim Studt, Re: Problem with ServerWorks CNB20LE and lost interrupts Linux Kernel Mailing List, https://lkml.org/lkml/2002/1/11/111 [2] RedHat Bug 665109 - e100 problems on old Compaq Proliant DL320 https://bugzilla.redhat.com/show_bug.cgi?id=665109 [3] R. Hughes-Jones, S. Dallison, G. Fairey, Performance Measurements on Gigabit Ethernet NICs and Server Quality Motherboards, http://datatag.web.cern.ch/papers/pfldnet2003-rhj.doc [4] "Hardware for Linux", Probe #d6b5151873 of Intel STL2-bd A28808-302 Desktop Computer (STL2) https://linux-hardware.org/?probe=d6b5151873 [5] "Hardware for Linux", Probe #0b5d843f10 of Compaq ProLiant DL380 https://linux-hardware.org/?probe=0b5d843f10 [6] Ubuntu Forums, Dell Poweredge 2400 - Adaptec SCSI Bus AIC-7880 https://ubuntuforums.org/showthread.php?t=1689552 [7] Ira W. Snyder, "BISECTED: 2.6.35 (and -git) fail to boot: APIC problems" https://lkml.org/lkml/2010/8/13/220 [8] Bjorn Helgaas, "Re: [PATCH] x86/pci: drop ServerWorks / Broadcom CNB20LE PCI host bridge driver" https://lore.kernel.org/lkml/20220318165535.GA840063@bhelgaas/T/ Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: David Heideberg <david@ixit.cz> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-6-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:48 +01:00
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32 I was unable to find a good description of the ServerWorks CNB20LE chipset. However, it was probably exclusively used with the Pentium III processor (this CPU model was used in all references to it that I found where the CPU model was provided: dmesgs in [1] and [2]; [3] page 2; [4]-[7]). As is widely known, the Pentium III processor did not support the 64-bit mode, support for which was introduced by Intel a couple of years later. So it is safe to assume that no systems with the CNB20LE chipset have amd64 and the CONFIG_PCI_CNB20LE_QUIRK may now depend on X86_32. Additionally, I have determined that most computers with the CNB20LE chipset did have ACPI support and this driver was inactive on them. I have submitted a patch to remove this driver, but it was met with resistance [8]. [1] Jim Studt, Re: Problem with ServerWorks CNB20LE and lost interrupts Linux Kernel Mailing List, https://lkml.org/lkml/2002/1/11/111 [2] RedHat Bug 665109 - e100 problems on old Compaq Proliant DL320 https://bugzilla.redhat.com/show_bug.cgi?id=665109 [3] R. Hughes-Jones, S. Dallison, G. Fairey, Performance Measurements on Gigabit Ethernet NICs and Server Quality Motherboards, http://datatag.web.cern.ch/papers/pfldnet2003-rhj.doc [4] "Hardware for Linux", Probe #d6b5151873 of Intel STL2-bd A28808-302 Desktop Computer (STL2) https://linux-hardware.org/?probe=d6b5151873 [5] "Hardware for Linux", Probe #0b5d843f10 of Compaq ProLiant DL380 https://linux-hardware.org/?probe=0b5d843f10 [6] Ubuntu Forums, Dell Poweredge 2400 - Adaptec SCSI Bus AIC-7880 https://ubuntuforums.org/showthread.php?t=1689552 [7] Ira W. Snyder, "BISECTED: 2.6.35 (and -git) fail to boot: APIC problems" https://lkml.org/lkml/2010/8/13/220 [8] Bjorn Helgaas, "Re: [PATCH] x86/pci: drop ServerWorks / Broadcom CNB20LE PCI host bridge driver" https://lore.kernel.org/lkml/20220318165535.GA840063@bhelgaas/T/ Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: David Heideberg <david@ixit.cz> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250321-x86_x2apic-v3-6-b0cbaa6fa338@ixit.cz
2025-03-21 21:48:48 +01:00
x86/olpc: Fix inconsistent MFD_CS5535 configuration This Kconfig warning appeared after a fix to the Kconfig validation. The GPIO_CS5535 driver depends on the MFD_CS5535 driver, but the former is selected in places where the latter is not: WARNING: unmet direct dependencies detected for GPIO_CS5535 Depends on [m]: GPIOLIB [=y] && (X86 [=y] || MIPS || COMPILE_TEST [=y]) && MFD_CS5535 [=m] Selected by [y]: - OLPC_XO1_SCI [=y] && X86_32 [=y] && OLPC [=y] && OLPC_XO1_PM [=y] && INPUT [=y]=y The warning does seem appropriate, since the GPIO_CS5535 driver won't work unless MFD_CS5535 is also present. However, there is no link time dependency between the two, so this caused no problems during randconfig testing before. This changes the 'select GPIO_CS5535' to 'depends on GPIO_CS5535' to avoid the issue, at the expense of making it harder to configure the driver (one now has to select the dependencies first). The 'select MFD_CORE' part is completely redundant, since we already depend on MFD_CS5535 here, so I'm removing that as well. Ideally, the private symbols exported by that cs5535 gpio driver would just be converted to gpiolib interfaces so we could expletely avoid this dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kbuild@vger.kernel.org Fixes: f622f8279581 ("kconfig: warn unmet direct dependency of tristate symbols selected by y") Link: http://lkml.kernel.org/r/20180404124539.3817101-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-04 14:44:54 +02:00
A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKcdUsTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYofu/EACJEYM67sgOGX/OPxSI2QrcqIPajI/u EMrNi69jR8XBgFUwnYRLC+eoC7nvYdpTaUHzQklS2xhE8lcZ4PcMejy9nHECe8MI sYA38gXeGamM4pzFQgpsX0Eoq1OX3iH165dCnSgRfGg2Zv6YovmcGk2fkHtA0fXn Sqp5fy33wK2U+ghY5MrJwVQ2SshbDp4p7SJ80iLCfdHvtKzQi02EH4CjrZ/guoJL bjdiWXA+eIDrPXhoPiBkFQ3cG/vHPc/oj2SEAnBV5oC+hdgjFebiz6CNYbFw0QI9 MnJQlvhu/oe66J6sRGfqPABm4yh4omNSbjNjbWr9ahoVPvprH9gJ2EMBx6qOT3pe sG6pluiQAZXBoOpRqR45vws4Ypq5onyv4OwMzEFNZVT9kzr1qrMJtsXIlffM/hHE zgygCV1nqWznUueZKcI6XkXVtawte9wfpujDuZhCgoD/UaIixulW8zpK/0h9iUI5 03u0lXse20h7kEmJYZ+vgQwSci/6i10U1X7+VngIrBAt24gtzigdKd6FLljSPp0y GOc9c79qNdm0Ayofko/m+XtwXw8UJ2Pbtkvku8qmyUR3ffUlBD+qcTPIZ6TZ8aPb w17k64zxEMQRYlMm8uHRg8KVJXuWD8nO3BSzwpwPVyckpsL4CkEcgdij7HMN7dLO +GCpzbvafupD6Q== =vSDr -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
2022-06-05 10:53:41 -07:00