linux/fs/nfsd/state.h

907 lines
29 KiB

NFSD: Implement CB_SEQUENCE referring call lists We have yet to implement a mechanism in NFSD for resolving races between a server's reply and a related callback operation. For example, a CB_OFFLOAD callback can race with the matching COPY response. The client will not recognize the copy state ID in the CB_OFFLOAD callback until the COPY response arrives. Trond adds: > It is also needed for the same kind of race with delegation > recalls, layout recalls, CB_NOTIFY_DEVICEID and would also be > helpful (although not as strongly required) for CB_NOTIFY_LOCK. RFC 8881 Section 20.9.3 describes referring call lists this way: > The csa_referring_call_lists array is the list of COMPOUND > requests, identified by session ID, slot ID, and sequence ID. > These are requests that the client previously sent to the server. > These previous requests created state that some operation(s) in > the same CB_COMPOUND as the csa_referring_call_lists are > identifying. A session ID is included because leased state is tied > to a client ID, and a client ID can have multiple sessions. See > Section 2.10.6.3. Introduce the XDR infrastructure for populating the csa_referring_call_lists argument of CB_SEQUENCE. Subsequent patches will put the referring call list to use. Note that cb_sequence_enc_sz estimates that only zero or one rcl is included in each CB_SEQUENCE, but the new infrastructure can manage any number of referring calls. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-03-01 13:31:49 -05:00
NFSD: Implement CB_SEQUENCE referring call lists We have yet to implement a mechanism in NFSD for resolving races between a server's reply and a related callback operation. For example, a CB_OFFLOAD callback can race with the matching COPY response. The client will not recognize the copy state ID in the CB_OFFLOAD callback until the COPY response arrives. Trond adds: > It is also needed for the same kind of race with delegation > recalls, layout recalls, CB_NOTIFY_DEVICEID and would also be > helpful (although not as strongly required) for CB_NOTIFY_LOCK. RFC 8881 Section 20.9.3 describes referring call lists this way: > The csa_referring_call_lists array is the list of COMPOUND > requests, identified by session ID, slot ID, and sequence ID. > These are requests that the client previously sent to the server. > These previous requests created state that some operation(s) in > the same CB_COMPOUND as the csa_referring_call_lists are > identifying. A session ID is included because leased state is tied > to a client ID, and a client ID can have multiple sessions. See > Section 2.10.6.3. Introduce the XDR infrastructure for populating the csa_referring_call_lists argument of CB_SEQUENCE. Subsequent patches will put the referring call list to use. Note that cb_sequence_enc_sz estimates that only zero or one rcl is included in each CB_SEQUENCE, but the new infrastructure can manage any number of referring calls. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-03-01 13:31:49 -05:00
nfsd: split sc_status out of sc_type sc_type identifies the type of a state - open, lock, deleg, layout - and also the status of a state - closed or revoked. This is a bit untidy and could get worse when "admin-revoked" states are added. So clean it up. With this patch, the type is now all that is stored in sc_type. This is zero when the state is first added to ->cl_stateids (causing it to be ignored), and is then set appropriately once it is fully initialised. It is set under ->cl_lock to ensure atomicity w.r.t lookup. It is now never cleared. sc_type is still a bit-set even though at most one bit is set. This allows lookup functions to be given a bitmap of acceptable types. sc_type is now an unsigned short rather than char. There is no value in restricting to just 8 bits. All the constants now start SC_TYPE_ matching the field in which they are stored. Keeping the existing names and ensuring clear separation from non-type flags would have required something like NFS4_STID_TYPE_CLOSED which is cumbersome. The "NFS4" prefix is redundant was they only appear in NFS4 code, so remove that and change STID to SC to match the field. The status is stored in a separate unsigned short named "sc_status". It has two flags: SC_STATUS_CLOSED and SC_STATUS_REVOKED. CLOSED combines NFS4_CLOSED_STID, NFS4_CLOSED_DELEG_STID, and is used for SC_TYPE_LOCK and SC_TYPE_LAYOUT instead of setting the sc_type to zero. These flags are only ever set, never cleared. For deleg stateids they are set under the global state_lock. For open and lock stateids they are set under ->cl_lock. For layout stateids they are set under ->ls_lock nfs4_unhash_stid() has been removed, and we never set sc_type = 0. This was only used for LOCK and LAYOUT stids and they now use SC_STATUS_CLOSED. Also TRACE_DEFINE_NUM() calls for the various STID #define have been removed because these things are not enums, and so that call is incorrect. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-01-30 12:08:25 +11:00
nfsd: split sc_status out of sc_type sc_type identifies the type of a state - open, lock, deleg, layout - and also the status of a state - closed or revoked. This is a bit untidy and could get worse when "admin-revoked" states are added. So clean it up. With this patch, the type is now all that is stored in sc_type. This is zero when the state is first added to ->cl_stateids (causing it to be ignored), and is then set appropriately once it is fully initialised. It is set under ->cl_lock to ensure atomicity w.r.t lookup. It is now never cleared. sc_type is still a bit-set even though at most one bit is set. This allows lookup functions to be given a bitmap of acceptable types. sc_type is now an unsigned short rather than char. There is no value in restricting to just 8 bits. All the constants now start SC_TYPE_ matching the field in which they are stored. Keeping the existing names and ensuring clear separation from non-type flags would have required something like NFS4_STID_TYPE_CLOSED which is cumbersome. The "NFS4" prefix is redundant was they only appear in NFS4 code, so remove that and change STID to SC to match the field. The status is stored in a separate unsigned short named "sc_status". It has two flags: SC_STATUS_CLOSED and SC_STATUS_REVOKED. CLOSED combines NFS4_CLOSED_STID, NFS4_CLOSED_DELEG_STID, and is used for SC_TYPE_LOCK and SC_TYPE_LAYOUT instead of setting the sc_type to zero. These flags are only ever set, never cleared. For deleg stateids they are set under the global state_lock. For open and lock stateids they are set under ->cl_lock. For layout stateids they are set under ->ls_lock nfs4_unhash_stid() has been removed, and we never set sc_type = 0. This was only used for LOCK and LAYOUT stids and they now use SC_STATUS_CLOSED. Also TRACE_DEFINE_NUM() calls for the various STID #define have been removed because these things are not enums, and so that call is incorrect. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-01-30 12:08:25 +11:00
nfsd: split sc_status out of sc_type sc_type identifies the type of a state - open, lock, deleg, layout - and also the status of a state - closed or revoked. This is a bit untidy and could get worse when "admin-revoked" states are added. So clean it up. With this patch, the type is now all that is stored in sc_type. This is zero when the state is first added to ->cl_stateids (causing it to be ignored), and is then set appropriately once it is fully initialised. It is set under ->cl_lock to ensure atomicity w.r.t lookup. It is now never cleared. sc_type is still a bit-set even though at most one bit is set. This allows lookup functions to be given a bitmap of acceptable types. sc_type is now an unsigned short rather than char. There is no value in restricting to just 8 bits. All the constants now start SC_TYPE_ matching the field in which they are stored. Keeping the existing names and ensuring clear separation from non-type flags would have required something like NFS4_STID_TYPE_CLOSED which is cumbersome. The "NFS4" prefix is redundant was they only appear in NFS4 code, so remove that and change STID to SC to match the field. The status is stored in a separate unsigned short named "sc_status". It has two flags: SC_STATUS_CLOSED and SC_STATUS_REVOKED. CLOSED combines NFS4_CLOSED_STID, NFS4_CLOSED_DELEG_STID, and is used for SC_TYPE_LOCK and SC_TYPE_LAYOUT instead of setting the sc_type to zero. These flags are only ever set, never cleared. For deleg stateids they are set under the global state_lock. For open and lock stateids they are set under ->cl_lock. For layout stateids they are set under ->ls_lock nfs4_unhash_stid() has been removed, and we never set sc_type = 0. This was only used for LOCK and LAYOUT stids and they now use SC_STATUS_CLOSED. Also TRACE_DEFINE_NUM() calls for the various STID #define have been removed because these things are not enums, and so that call is incorrect. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-01-30 12:08:25 +11:00
nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely. Fixes: 2d4a532d385f ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") CC: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-10-18 15:24:58 -04:00
nfsd: split sc_status out of sc_type sc_type identifies the type of a state - open, lock, deleg, layout - and also the status of a state - closed or revoked. This is a bit untidy and could get worse when "admin-revoked" states are added. So clean it up. With this patch, the type is now all that is stored in sc_type. This is zero when the state is first added to ->cl_stateids (causing it to be ignored), and is then set appropriately once it is fully initialised. It is set under ->cl_lock to ensure atomicity w.r.t lookup. It is now never cleared. sc_type is still a bit-set even though at most one bit is set. This allows lookup functions to be given a bitmap of acceptable types. sc_type is now an unsigned short rather than char. There is no value in restricting to just 8 bits. All the constants now start SC_TYPE_ matching the field in which they are stored. Keeping the existing names and ensuring clear separation from non-type flags would have required something like NFS4_STID_TYPE_CLOSED which is cumbersome. The "NFS4" prefix is redundant was they only appear in NFS4 code, so remove that and change STID to SC to match the field. The status is stored in a separate unsigned short named "sc_status". It has two flags: SC_STATUS_CLOSED and SC_STATUS_REVOKED. CLOSED combines NFS4_CLOSED_STID, NFS4_CLOSED_DELEG_STID, and is used for SC_TYPE_LOCK and SC_TYPE_LAYOUT instead of setting the sc_type to zero. These flags are only ever set, never cleared. For deleg stateids they are set under the global state_lock. For open and lock stateids they are set under ->cl_lock. For layout stateids they are set under ->ls_lock nfs4_unhash_stid() has been removed, and we never set sc_type = 0. This was only used for LOCK and LAYOUT stids and they now use SC_STATUS_CLOSED. Also TRACE_DEFINE_NUM() calls for the various STID #define have been removed because these things are not enums, and so that call is incorrect. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-01-30 12:08:25 +11:00
nfsd: add support for freeing unused session-DRC slots Reducing the number of slots in the session slot table requires confirmation from the client. This patch adds reduce_session_slots() which starts the process of getting confirmation, but never calls it. That will come in a later patch. Before we can free a slot we need to confirm that the client won't try to use it again. This involves returning a lower cr_maxrequests in a SEQUENCE reply and then seeing a ca_maxrequests on the same slot which is not larger than we limit we are trying to impose. So for each slot we need to remember that we have sent a reduced cr_maxrequests. To achieve this we introduce a concept of request "generations". Each time we decide to reduce cr_maxrequests we increment the generation number, and record this when we return the lower cr_maxrequests to the client. When a slot with the current generation reports a low ca_maxrequests, we commit to that level and free extra slots. We use an 16 bit generation number (64 seems wasteful) and if it cycles we iterate all slots and reset the generation number to avoid false matches. When we free a slot we store the seqid in the slot pointer so that it can be restored when we reactivate the slot. The RFC can be read as suggesting that the slot number could restart from one after a slot is retired and reactivated, but also suggests that retiring slots is not required. So when we reactive a slot we accept with the next seqid in sequence, or 1. When decoding sa_highest_slotid into maxslots we need to add 1 - this matches how it is encoded for the reply. se_dead is moved in struct nfsd4_session to remove a hole. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-12-12 08:47:08 +11:00
nfsd4: fix cached replies to solo SEQUENCE compounds Currently our handling of 4.1+ requests without "cachethis" set is confusing and not quite correct. Suppose a client sends a compound consisting of only a single SEQUENCE op, and it matches the seqid in a session slot (so it's a retry), but the previous request with that seqid did not have "cachethis" set. The obvious thing to do might be to return NFS4ERR_RETRY_UNCACHED_REP, but the protocol only allows that to be returned on the op following the SEQUENCE, and there is no such op in this case. The protocol permits us to cache replies even if the client didn't ask us to. And it's easy to do so in the case of solo SEQUENCE compounds. So, when we get a solo SEQUENCE, we can either return the previously cached reply or NFSERR_SEQ_FALSE_RETRY if we notice it differs in some way from the original call. Currently, we're returning a corrupt reply in the case a solo SEQUENCE matches a previous compound with more ops. This actually matters because the Linux client recently started doing this as a way to recover from lost replies to idempotent operations in the case the process doing the original reply was killed: in that case it's difficult to keep the original arguments around to do a real retry, and the client no longer cares what the result is anyway, but it would like to make sure that the slot's sequence id has been incremented, and the solo SEQUENCE assures that: if the server never got the original reply, it will increment the sequence id. If it did get the original reply, it won't increment, and nothing else that about the reply really matters much. But we can at least attempt to return valid xdr! Tested-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-10-18 16:17:18 -04:00
nfsd: add support for freeing unused session-DRC slots Reducing the number of slots in the session slot table requires confirmation from the client. This patch adds reduce_session_slots() which starts the process of getting confirmation, but never calls it. That will come in a later patch. Before we can free a slot we need to confirm that the client won't try to use it again. This involves returning a lower cr_maxrequests in a SEQUENCE reply and then seeing a ca_maxrequests on the same slot which is not larger than we limit we are trying to impose. So for each slot we need to remember that we have sent a reduced cr_maxrequests. To achieve this we introduce a concept of request "generations". Each time we decide to reduce cr_maxrequests we increment the generation number, and record this when we return the lower cr_maxrequests to the client. When a slot with the current generation reports a low ca_maxrequests, we commit to that level and free extra slots. We use an 16 bit generation number (64 seems wasteful) and if it cycles we iterate all slots and reset the generation number to avoid false matches. When we free a slot we store the seqid in the slot pointer so that it can be restored when we reactivate the slot. The RFC can be read as suggesting that the slot number could restart from one after a slot is retired and reactivated, but also suggests that retiring slots is not required. So when we reactive a slot we accept with the next seqid in sequence, or 1. When decoding sa_highest_slotid into maxslots we need to add 1 - this matches how it is encoded for the reply. se_dead is moved in struct nfsd4_session to remove a hole. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-12-12 08:47:08 +11:00
nfsd41: Use separate DRC for setclientid Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-23 19:02:16 -04:00
nfsd41: Use separate DRC for setclientid Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-23 19:02:16 -04:00
nfsd41: Use separate DRC for setclientid Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-23 19:02:16 -04:00
nfsd: add support for freeing unused session-DRC slots Reducing the number of slots in the session slot table requires confirmation from the client. This patch adds reduce_session_slots() which starts the process of getting confirmation, but never calls it. That will come in a later patch. Before we can free a slot we need to confirm that the client won't try to use it again. This involves returning a lower cr_maxrequests in a SEQUENCE reply and then seeing a ca_maxrequests on the same slot which is not larger than we limit we are trying to impose. So for each slot we need to remember that we have sent a reduced cr_maxrequests. To achieve this we introduce a concept of request "generations". Each time we decide to reduce cr_maxrequests we increment the generation number, and record this when we return the lower cr_maxrequests to the client. When a slot with the current generation reports a low ca_maxrequests, we commit to that level and free extra slots. We use an 16 bit generation number (64 seems wasteful) and if it cycles we iterate all slots and reset the generation number to avoid false matches. When we free a slot we store the seqid in the slot pointer so that it can be restored when we reactivate the slot. The RFC can be read as suggesting that the slot number could restart from one after a slot is retired and reactivated, but also suggests that retiring slots is not required. So when we reactive a slot we accept with the next seqid in sequence, or 1. When decoding sa_highest_slotid into maxslots we need to add 1 - this matches how it is encoded for the reply. se_dead is moved in struct nfsd4_session to remove a hole. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-12-12 08:47:08 +11:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd41: Use separate DRC for setclientid Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-23 19:02:16 -04:00
nfsd41: exchange_id operation Implement the exchange_id operation confoming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28 Based on the client provided name, hash a client id. If a confirmed one is found, compare the op's creds and verifier. If the creds match and the verifier is different then expire the old client (client re-incarnated), otherwise, if both match, assume it's a replay and ignore it. If an unconfirmed client is found, then copy the new creds and verifer if need update, otherwise assume replay. The client is moved to a confirmed state on create_session. In the nfs41 branch set the exchange_id flags to EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER (pNFS is not supported, Referrals are supported, Migration is not.). Address various scenarios from section 18.35 of the spec: 1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set EXCHGID4_FLAG_CONFIRMED_R as appropriate. 2. Return error codes per 18.35.4 scenarios. 3. Update client records or generate new client ids depending on scenario. Note: 18.35.4 case 3 probably still needs revisiting. The handling seems not quite right. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Andy Adamosn <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use utsname for major_id (and copy to server_scope)] [nfsd41: fix handling of various exchange id scenarios] Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A] [simplify nfsd4_encode_exchange_id error handling] [nfsd41: embed an xdr_netobj in nfsd4_exchange_id] [nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03 08:28:01 +03:00
NFSD: Track SCSI Persistent Registration Fencing per Client with xarray When a client holding pNFS SCSI layouts becomes unresponsive, the server revokes access by preempting the client's SCSI persistent reservation key. A layout recall is issued for each layout the client holds; if the client fails to respond, each recall triggers a fence operation. The first preempt for a given device succeeds and removes the client's key registration. Subsequent preempts for the same device fail because the key is no longer registered. Update the NFS server to handle SCSI persistent registration fencing on a per-client and per-device basis by utilizing an xarray associated with the nfs4_client structure. Each xarray entry is indexed by the dev_t of a block device registered by the client. The entry maintains a flag indicating whether this device has already been fenced for the corresponding client. When the server issues a persistent registration key to a client, it creates a new xarray entry at the dev_t index with the fenced flag initialized to 0. Before performing a fence via nfsd4_scsi_fence_client, the server checks the corresponding entry using the device's dev_t. If the fenced flag is already set, the fence operation is skipped; otherwise, the flag is set to 1 and fencing proceeds. The xarray is destroyed when the nfs4_client is released in __destroy_client. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-01-19 10:41:26 -05:00
NFSD: Track SCSI Persistent Registration Fencing per Client with xarray When a client holding pNFS SCSI layouts becomes unresponsive, the server revokes access by preempting the client's SCSI persistent reservation key. A layout recall is issued for each layout the client holds; if the client fails to respond, each recall triggers a fence operation. The first preempt for a given device succeeds and removes the client's key registration. Subsequent preempts for the same device fail because the key is no longer registered. Update the NFS server to handle SCSI persistent registration fencing on a per-client and per-device basis by utilizing an xarray associated with the nfs4_client structure. Each xarray entry is indexed by the dev_t of a block device registered by the client. The entry maintains a flag indicating whether this device has already been fenced for the corresponding client. When the server issues a persistent registration key to a client, it creates a new xarray entry at the dev_t index with the fenced flag initialized to 0. Before performing a fence via nfsd4_scsi_fence_client, the server checks the corresponding entry using the device's dev_t. If the fenced flag is already set, the fence operation is skipped; otherwise, the flag is set to 1 and fencing proceeds. The xarray is destroyed when the nfs4_client is released in __destroy_client. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-01-19 10:41:26 -05:00
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Nicholas Carlini <npc@anthropic.com> Tested-by: Nicholas Carlini <npc@anthropic.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-02-24 11:33:35 -05:00
nfsd: make deny mode enforcement more efficient and close races in it The current enforcement of deny modes is both inefficient and scattered across several places, which makes it hard to guarantee atomicity. The inefficiency is a problem now, and the lack of atomicity will mean races once the client_mutex is removed. First, we address the inefficiency. We have to track deny modes on a per-stateid basis to ensure that open downgrades are sane, but when the server goes to enforce them it has to walk the entire list of stateids and check against each one. Instead of doing that, maintain a per-nfs4_file deny mode. When a file is opened, we simply set any deny bits in that mode that were specified in the OPEN call. We can then use that unified deny mode to do a simple check to see whether there are any conflicts without needing to walk the entire stateid list. The only time we'll need to walk the entire list of stateids is when a stateid that has a deny mode on it is being released, or one is having its deny mode downgraded. In that case, we must walk the entire list and recalculate the fi_share_deny field. Since deny modes are pretty rare today, this should be very rare under normal workloads. To address the potential for races once the client_mutex is removed, protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to make sure that any deny mode we want to apply won't conflict with existing access. If that's ok, then have nfs4_file_get_access check that new access to the file won't conflict with existing deny modes. If that also passes, then get file access references, set the correct access and deny bits in the stateid, and update the fi_share_deny field. If opening the file or truncating it fails, then unwind the whole mess and return the appropriate error. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-10 14:07:34 -04:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd: implement pNFS operations Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage outstanding layouts and devices. Layout management is very straight forward, with a nfs4_layout_stateid structure that extends nfs4_stid to manage layout stateids as the top-level structure. It is linked into the nfs4_file and nfs4_client structures like the other stateids, and contains a linked list of layouts that hang of the stateid. The actual layout operations are implemented in layout drivers that are not part of this commit, but will be added later. The worst part of this commit is the management of the pNFS device IDs, which suffers from a specification that is not sanely implementable due to the fact that the device-IDs are global and not bound to an export, and have a small enough size so that we can't store the fsid portion of a file handle, and must never be reused. As we still do need perform all export authentication and validation checks on a device ID passed to GETDEVICEINFO we are caught between a rock and a hard place. To work around this issue we add a new hash that maps from a 64-bit integer to a fsid so that we can look up the export to authenticate against it, a 32-bit integer as a generation that we can bump when changing the device, and a currently unused 32-bit integer that could be used in the future to handle more than a single device per export. Entries in this hash table are never deleted as we can't reuse the ids anyway, and would have a severe lifetime problem anyway as Linux export structures are temporary structures that can go away under load. Parts of the XDR data, structures and marshaling/unmarshaling code, as well as many concepts are derived from the old pNFS server implementation from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman, Mike Sager, Ricardo Labiaga and many others. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-05 13:11:59 +02:00
nfsd: split sc_status out of sc_type sc_type identifies the type of a state - open, lock, deleg, layout - and also the status of a state - closed or revoked. This is a bit untidy and could get worse when "admin-revoked" states are added. So clean it up. With this patch, the type is now all that is stored in sc_type. This is zero when the state is first added to ->cl_stateids (causing it to be ignored), and is then set appropriately once it is fully initialised. It is set under ->cl_lock to ensure atomicity w.r.t lookup. It is now never cleared. sc_type is still a bit-set even though at most one bit is set. This allows lookup functions to be given a bitmap of acceptable types. sc_type is now an unsigned short rather than char. There is no value in restricting to just 8 bits. All the constants now start SC_TYPE_ matching the field in which they are stored. Keeping the existing names and ensuring clear separation from non-type flags would have required something like NFS4_STID_TYPE_CLOSED which is cumbersome. The "NFS4" prefix is redundant was they only appear in NFS4 code, so remove that and change STID to SC to match the field. The status is stored in a separate unsigned short named "sc_status". It has two flags: SC_STATUS_CLOSED and SC_STATUS_REVOKED. CLOSED combines NFS4_CLOSED_STID, NFS4_CLOSED_DELEG_STID, and is used for SC_TYPE_LOCK and SC_TYPE_LAYOUT instead of setting the sc_type to zero. These flags are only ever set, never cleared. For deleg stateids they are set under the global state_lock. For open and lock stateids they are set under ->cl_lock. For layout stateids they are set under ->ls_lock nfs4_unhash_stid() has been removed, and we never set sc_type = 0. This was only used for LOCK and LAYOUT stids and they now use SC_STATUS_CLOSED. Also TRACE_DEFINE_NUM() calls for the various STID #define have been removed because these things are not enums, and so that call is incorrect. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-01-30 12:08:25 +11:00
NFSD: Implement CB_SEQUENCE referring call lists We have yet to implement a mechanism in NFSD for resolving races between a server's reply and a related callback operation. For example, a CB_OFFLOAD callback can race with the matching COPY response. The client will not recognize the copy state ID in the CB_OFFLOAD callback until the COPY response arrives. Trond adds: > It is also needed for the same kind of race with delegation > recalls, layout recalls, CB_NOTIFY_DEVICEID and would also be > helpful (although not as strongly required) for CB_NOTIFY_LOCK. RFC 8881 Section 20.9.3 describes referring call lists this way: > The csa_referring_call_lists array is the list of COMPOUND > requests, identified by session ID, slot ID, and sequence ID. > These are requests that the client previously sent to the server. > These previous requests created state that some operation(s) in > the same CB_COMPOUND as the csa_referring_call_lists are > identifying. A session ID is included because leased state is tied > to a client ID, and a client ID can have multiple sessions. See > Section 2.10.6.3. Introduce the XDR infrastructure for populating the csa_referring_call_lists argument of CB_SEQUENCE. Subsequent patches will put the referring call list to use. Note that cb_sequence_enc_sz estimates that only zero or one rcl is included in each CB_SEQUENCE, but the new infrastructure can manage any number of referring calls. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-03-01 13:31:49 -05:00
nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn't require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn't restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free. Reported-by: Li Lingfeng <lilingfeng3@huawei.com> Closes: https://lore.kernel.org/linux-nfs/20250623030015.2353515-1-neil@brown.name/T/#t Fixes: 7f5ef2e900d9 ("nfsd: add a v4_end_grace file to /proc/fs/nfsd") Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neil@brown.name> Tested-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-12-13 13:41:59 -05:00