linux/net/mac80211/main.c

1799 lines
51 KiB

mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:56:21 -07:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 01:29:23 -04:00
wifi: cfg80211/mac80211: Add support to get radio index Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-15 13:53:09 +05:30
wifi: cfg80211/mac80211: Add support to get radio index Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-15 13:53:09 +05:30
wifi: cfg80211/mac80211: Add support to get radio index Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-15 13:53:09 +05:30
wifi: cfg80211/mac80211: Add support to get radio index Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-15 13:53:09 +05:30
mac80211: fix a race between restart and CSA flows We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-31 11:31:06 +03:00
mac80211: fix a race between restart and CSA flows We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-31 11:31:06 +03:00
mac80211: fix a race between restart and CSA flows We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-31 11:31:06 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 13:43:26 +03:00
mac80211: fix aggregation for hardware with ampdu queues Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-12 00:51:53 +01:00
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-18 22:06:09 -08:00
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-18 22:06:09 -08:00
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-18 22:06:09 -08:00
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: Add airtime accounting and scheduling to TXQs This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 17:02:08 -08:00
mac80211: Fix a rwlock bad magic bug read_lock(&tpt_trig->trig.leddev_list_lock) is accessed via the path ieee80211_open (->) ieee80211_do_open (->) ieee80211_mod_tpt_led_trig (->) ieee80211_start_tpt_led_trig (->) tpt_trig_timer before initializing it. the intilization of this read/write lock happens via the path ieee80211_led_init (->) led_trigger_register, but we are doing 'ieee80211_led_init' after 'ieeee80211_if_add' where we register netdev_ops. so we access leddev_list_lock before initializing it and causes the following bug in chrome laptops with AR928X cards with the following script while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done BUG: rwlock bad magic on CPU#1, wpa_supplicant/358, f5b9eccc Pid: 358, comm: wpa_supplicant Not tainted 3.0.13 #1 Call Trace: [<8137b9df>] rwlock_bug+0x3d/0x47 [<81179830>] do_raw_read_lock+0x19/0x29 [<8137f063>] _raw_read_lock+0xd/0xf [<f9081957>] tpt_trig_timer+0xc3/0x145 [mac80211] [<f9081f3a>] ieee80211_mod_tpt_led_trig+0x152/0x174 [mac80211] [<f9076a3f>] ieee80211_do_open+0x11e/0x42e [mac80211] [<f9075390>] ? ieee80211_check_concurrent_iface+0x26/0x13c [mac80211] [<f9076d97>] ieee80211_open+0x48/0x4c [mac80211] [<812dbed8>] __dev_open+0x82/0xab [<812dc0c9>] __dev_change_flags+0x9c/0x113 [<812dc1ae>] dev_change_flags+0x18/0x44 [<8132144f>] devinet_ioctl+0x243/0x51a [<81321ba9>] inet_ioctl+0x93/0xac [<812cc951>] sock_ioctl+0x1c6/0x1ea [<812cc78b>] ? might_fault+0x20/0x20 [<810b1ebb>] do_vfs_ioctl+0x46e/0x4a2 [<810a6ebb>] ? fget_light+0x2f/0x70 [<812ce549>] ? sys_recvmsg+0x3e/0x48 [<810b1f35>] sys_ioctl+0x46/0x69 [<8137fa77>] sysenter_do_call+0x12/0x2 Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Abhijit Pradhan <abhijit@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09 19:59:43 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30
mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-07 15:40:55 +05:30