linux/fs/gfs2/lops.c

846 lines
20 KiB

[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 14:50:20 -05:00
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 09:53:19 +01:00
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 09:53:19 +01:00
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 09:53:19 +01:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 11:50:51 +00:00