net: phy: air_en8811h: restore AN8811HB LED GPIO after MCU restart

Browse source

Commit 03b4702fc5 ("net: phy: air_en8811h: move LED GPIO
configuration to config_init") moved the EN8811H LED GPIO setup from
probe to config_init because an MD32 restart clears the output-enable
bits.

AN8811HB follows the same initialization sequence: an8811hb_probe()
enables GPIO3/4/5, and later config_init() calls restart MD32.

Move the AN8811HB GPIO setup to the end of an8811hb_config_init(),
matching the current EN8811H path.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyou Xu <xuziyougm@gmail.com>
Link: https://patch.msgid.link/20260829033844.1975-1-xuziyougm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

...

This commit is contained in:

Ziyou Xu 2026-08-29 11:38:43 +08:00 • committed by Jakub Kicinski

parent 17d7aa6954

commit 3498acda6b

1 changed files with 7 additions and 8 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

15

drivers/net/phy/air_en8811h.c

View file