arm64: dts: imx8mp-hummingboard-iiot: add dt overlays for muxable ports

Browse source

The SolidRun i.MX8MP HummingBoard IIoT has a variety of connectors, and
configurable ports:

- 2x RS232
- 2x RS485
- DSI Panel Connector
- LVDS Panel Connector

RS232 and RS485 each share a single UART from the SoC via a mux, which
are configured from the base dts for RS232 by default.

Provide addons for:

1. Reconfigure UART A from RS232 to RS485.
2. Reconfigure UART B from RS232 to RS485.
3. Configure DSI Connector for Winstar WJ70N3TYJHMNG0 Panel.
4. Configure LVDS Connector for Winstar WF70A8SYJHLNGA Panel.

A variation of the base dtb is generated for each addon to ensure that
make dtbs_check covers the resulting dtb, and applying overlay is
tested during build.

It is however expected that bootloader should apply any combination of
addons based on runtime configuration.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

...

This commit is contained in:

Josua Mayer 2026-03-13 14:30:58 +02:00 • committed by Frank Li

parent 8da7bfdcda

commit 514a34d75b

5 changed files with 212 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

12

arch/arm64/boot/dts/freescale/Makefile

View file

67

arch/arm64/boot/dts/freescale/imx8mp-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso

View file

97

arch/arm64/boot/dts/freescale/imx8mp-hummingboard-iiot-panel-lvds-WF70A8SYJHLNGA.dtso

View file

18

arch/arm64/boot/dts/freescale/imx8mp-hummingboard-iiot-rs485-a.dtso

View file

18

arch/arm64/boot/dts/freescale/imx8mp-hummingboard-iiot-rs485-b.dtso

View file