The PM660 PMIC is very often paired with the PM660L option on
SDM630/663/660 (and SDA variants) boards.
The PM660 has 11 "660" LDOs (2 NMOS, 9 PMOS) and 7 HT LDOs (4 NMOS,
3 PMOS) and a quirk: the L4 regulator is unaccessible or does not
exist on the PMIC.
The PM660L has 8 "660" LDOs (1 NMOS, 7 PMOS) and 2 HT NMOS LDOs.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-4-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the support for some regulator types that are
missing in this driver, such as the ht nmos-ldo, ht-lv nmos-ldo
and new gen n/pmos-ldo, all belonging to the FTSMPS426 register
layout.
This is done in preparation for adding support for the PM660 and
PM660L PMICs.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-3-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulator drivers may be defining very long names: this is the
case with the qcom_smd and qcom_spmi regulators, where we need to
parse the regulator parents from DT.
For clarity, this is an example:
{ "l13a", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo,
"vdd_l8_l9_l10_l11_l12_l13_l14" },
pm660-regulators {
...
vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>
...
};
Now, with a 32 characters limit, the function is trying to parse,
exactly, "vdd_l8_l9_l10_l11_l12_l13_l14-s" (32 chars) instead of
the right one, which is 37 chars long in this specific case.
... And this is not only the case with PM660/PM660L, but also with
PMA8084, PM8916, PM8950 and others that are not implemented yet.
The length of 64 chars was chosen based on the longest parsed property
name that I could find, which is in PM8916, and would be 53 characters
long.
At that point, rounding that to 64 looked like being the best idea.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-2-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add vendor suffix to all proprietary properties.
2. Fix typo.
3. Change lsw to normal property, not pattern property.
4. Due to item 1, modify source code for property parsing.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1601460480-4259-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Three simple patches to aid in debugging regulators.
Michał Mirosław (3):
regulator: print state at boot
regulator: print symbolic errors in kernel messages
regulator: resolve supply after creating regulator
drivers/regulator/core.c | 124 ++++++++++++++++++++++-----------------
1 file changed, 69 insertions(+), 55 deletions(-)
--
2.20.1
When creating a new regulator its supply cannot create the sysfs link
because the device is not yet published. Remove early supply resolving
since it will be done later anyway. This makes the following error
disappear and the symlinks get created instead.
DCDC_REG1: supplied by VSYS
VSYS: could not add device link regulator.3 err -2
Note: It doesn't fix the problem for bypassed regulators, though.
Fixes: 45389c4752 ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was using subsys_initcall() because in old times deferred
probe was not supported everywhere and specific ordering was needed.
Since probe deferral works fine and specific ordering is discouraged
(hides dependencies between drivers and couples their boot order), the
driver can be converted to regular module_platform_driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200921203616.19623-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
tested to increase build coverage. This allows to build them on
configurations without I2C (as I2C is required by dependency - parent
MFD driver).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200920214107.6299-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ROHM BD9576MUF and BD9573MUF PMICs.
These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.
Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.
This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:
- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.
This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.
---
Matti Vaittinen (6):
dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
mfd: Support ROHM BD9576MUF and BD9573MUF
wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
regulator: Support ROHM BD9576MUF and BD9573MUF
MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers
.../bindings/mfd/rohm,bd9576-pmic.yaml | 129 +++++++
.../regulator/rohm,bd9576-regulator.yaml | 33 ++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd9576.c | 130 +++++++
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd9576-regulator.c | 337 ++++++++++++++++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd9576_wdt.c | 295 +++++++++++++++
include/linux/mfd/rohm-bd957x.h | 61 ++++
include/linux/mfd/rohm-generic.h | 2 +
14 files changed, 1028 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
create mode 100644 drivers/mfd/rohm-bd9576.c
create mode 100644 drivers/regulator/bd9576-regulator.c
create mode 100644 drivers/watchdog/bd9576_wdt.c
create mode 100644 include/linux/mfd/rohm-bd957x.h
base-commit: f4d51dffc6
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
The only usage of ti_abb_reg_ops is to assign its address to the ops
field in the regulator_desc struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200913084114.8851-6-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usages of these is to assign their address to the ops field in
the regulator_desc struct, which is a const pointer. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200913084114.8851-5-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of stw481x_vmmc_ops is to assign its address to the ops
field in the regulator_desc struct which is a const pointer.
The only usage of vmmc_regulator is to pass its address to
of_get_regulator_init_data() and devm_regulator_register(), both which
take const pointers.
Make both of them const to allow the compiler to put them in read-only
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200913084114.8851-4-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of fixed_voltage_ops and fixed_voltage_clkenabled_ops is
to assign their address the ops field in the regulator_desc struct,
which is a const pointer. Make them const to allow the compiler to put
them in read-only memory.
make them const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200913084114.8851-3-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of dummy_initdata is to assign its address to the
init_data field of the regulator_config struct and the only usage
dummy_ops is to assign its address to the ops field in the
regulator_desc struct, both which are const pointers. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200913084114.8851-2-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warnings:
drivers/regulator/bd718x7-regulator.c:576:28: warning: symbol 'bd71847_swcontrol_ops' was not declared. Should it be static?
drivers/regulator/bd718x7-regulator.c:585:28: warning: symbol 'bd71847_hwcontrol_ops' was not declared. Should it be static?
drivers/regulator/bd718x7-regulator.c:902:28: warning: symbol 'bd71837_swcontrol_ops' was not declared. Should it be static?
drivers/regulator/bd718x7-regulator.c:913:28: warning: symbol 'bd71837_hwcontrol_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20200910034240.37268-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This removes regulator_lock/unlock() calls around
regulator_notifier_call_chain() as they are redundant - drivers
already have to guarantee regulator_dev's existence during the call.
This should make reasoing about the lock easier, as this was the only
use outside regulator core code.
The only client that needed recursive locking from the notifier chain
was drivers/usb/host/ohci-da8xx.c, which responds to over-current
notification by calling regulator_disable().
Michał Mirosław (3):
regulator: don't require mutex for regulator_notifier_call_chain()
regulator: remove locking around regulator_notifier_call_chain()
regulator: unexport regulator_lock/unlock()
drivers/regulator/core.c | 11 +++--------
drivers/regulator/da9055-regulator.c | 2 --
drivers/regulator/da9062-regulator.c | 2 --
drivers/regulator/da9063-regulator.c | 2 --
drivers/regulator/da9210-regulator.c | 4 ----
drivers/regulator/da9211-regulator.c | 4 ----
drivers/regulator/lp8755.c | 6 ------
drivers/regulator/ltc3589.c | 10 ++--------
drivers/regulator/ltc3676.c | 10 ++--------
drivers/regulator/pv88060-regulator.c | 10 ++--------
drivers/regulator/pv88080-regulator.c | 10 ++--------
drivers/regulator/pv88090-regulator.c | 10 ++--------
drivers/regulator/slg51000-regulator.c | 4 ----
drivers/regulator/stpmic1_regulator.c | 4 ----
drivers/regulator/wm831x-dcdc.c | 4 ----
drivers/regulator/wm831x-isink.c | 2 --
drivers/regulator/wm831x-ldo.c | 2 --
drivers/regulator/wm8350-regulator.c | 2 --
include/linux/regulator/driver.h | 3 ---
19 files changed, 13 insertions(+), 89 deletions(-)
--
2.20.1
In the case of an unrecognised mini-card the Lochnagar will not
initialise the VDDCORE voltage register leading to a value outside of the
current range. Add an additional range to cover these values, initially
this wasn't done since they are duplicates of the existing minimum
value.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200904122506.28017-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regulator_notifier_call_chain() doesn't need rdev lock and rdev's
existence is assumed in the code anyway. Remove the locks from drivers.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/42393f66dcc4d80dcd9797be45216b4035aa96cb.1597032945.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 3801b86aa4 ("regulator: Refactor supply implementation
to work as regular consumers") we no longer cascade notifications
and so notifier head's built-in rwsem is enough to protect the
notifier chain. Remove the requirement to fix one case where
rdev->mutex might be forced to be taken recursively.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/5a0da9017c69a4dbc3f9b50f44476fce80a73387.1597032945.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Including:
- Three Intel VT-d fixes to fix address handling on 32bit, fix a
NULL pointer dereference bug and serialize a hardware register
access as required by the VT-d spec.
- Two patches for AMD IOMMU to force AMD GPUs into translation mode
when memory encryption is active and disallow using IOMMUv2
functionality. This makes the AMDGPU driver working when
memory encryption is active.
- Two more fixes for AMD IOMMU to fix updating the Interrupt
Remapping Table Entries.
- MAINTAINERS file update for the Qualcom IOMMU driver.
-----BEGIN PGP SIGNATURE-----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=2uqs
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- three Intel VT-d fixes to fix address handling on 32bit, fix a NULL
pointer dereference bug and serialize a hardware register access as
required by the VT-d spec.
- two patches for AMD IOMMU to force AMD GPUs into translation mode
when memory encryption is active and disallow using IOMMUv2
functionality. This makes the AMDGPU driver work when memory
encryption is active.
- two more fixes for AMD IOMMU to fix updating the Interrupt Remapping
Table Entries.
- MAINTAINERS file update for the Qualcom IOMMU driver.
* tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Handle 36bit addressing for x86-32
iommu/amd: Do not use IOMMUv2 functionality when SME is active
iommu/amd: Do not force direct mapping when SME is active
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
iommu/amd: Restore IRTE.RemapEn bit after programming IRTE
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()
iommu/vt-d: Serialize IOMMU GCMD register modifications
MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX1Rn1wAKCRCAXGG7T9hj
vlEjAQC/KGC3wYw5TweWcY48xVzgvued3JLAQ6pcDlOe6osd6AEAzZcZKgL948cx
oY0T98dxb/U+lUhbIzhpBr/30g8JbAQ=
=Xcxp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
-----BEGIN PGP SIGNATURE-----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=w1IL
-----END PGP SIGNATURE-----
mergetag object 4e4bb89446
type commit
tag clang-format-for-linus-v5.9-rc4
tagger Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 1599306139 +0200
The usual trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
-----BEGIN PGP SIGNATURE-----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=Lcl0
-----END PGP SIGNATURE-----
mergetag object e5fc436f06
type commit
tag compiler-attributes-for-linus-v5.9-rc4
tagger Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 1599306822 +0200
Two trivial changes and a fix for sparse:
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van Oostenryck)
- Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting __has_attribute (Luc Van Oostenryck)
-----BEGIN PGP SIGNATURE-----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=RrSY
-----END PGP SIGNATURE-----
Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux
Pull misc fixes from Miguel Ojeda:
"A trivial patch for auxdisplay:
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
The usual clang-format trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
And Luc requested me to pick a sparse fix on my queue, so here it goes
along with other two trivial Compiler Attributes ones (also from Luc).
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
Oostenryck)
- Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting
__has_attribute (Luc Van Oostenryck)"
* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
auxdisplay: Replace HTTP links with HTTPS ones
* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
sparse: use static inline for __chk_{user,io}_ptr()
Compiler Attributes: fix comment concerning GCC 4.6
Compiler Attributes: remove comment about sparse not supporting __has_attribute
- Fix reference counting of operating performance points (OPP)
tables (Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related
to switching operation modes and handling CPU offline and
online and system-wide suspend/resume with hardware-managed
P-states (HWP) enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez).
-----BEGIN PGP SIGNATURE-----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=gsKc
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
Specifics:
- Fix reference counting of operating performance points (OPP) tables
(Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
-----BEGIN PGP SIGNATURE-----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=8fvz
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
resulting from an incorrect ADC conversion are too high and fire an
emergency shutdown (Tony Lindgren)
- Don't suppress negative temp for qcom spmi as they are valid and
userspace needs them (Veera Vegivada)
- Fix use-after-free in thermal_zone_device_unregister reported by
Kasan (Dmitry Osipenko)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl9SDqQACgkQqDIjiipP
6E9/qwf/WybOihgjeQUv3a9f4k6SeJphoDZRNATJtyU1e+fgJXUxjFqma6t4CYJv
uphZ1SppY9rnx1nWzhANSQjKun5KLwIskcNTCaGN4adRJ1cNdY63PdSX9BTJr9+H
w5H0AGWMErAOdmCPCro4pnZ3l3FPKXcoNvqDAjF1kZ97v5tMGzdInflOJl1ztUZA
scAnY7j0TyNsoRy2TV0oxQtSN9cDhgph1zJF1RcVzlU1uD897Htet1RF/PrHDvBW
NYVcWDTfiWmvf9Zewy2+cfApK9QGqBRhnwt4Z8PlTUcqrOgqAiNnOAnov+Topg/y
XNQzWwXFUip6bk5pTXPF8gSI0glkJg==
=LDGk
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix bogus thermal shutdowns for omap4430 where bogus values resulting
from an incorrect ADC conversion are too high and fire an emergency
shutdown (Tony Lindgren)
- Don't suppress negative temp for qcom spmi as they are valid and
userspace needs them (Veera Vegivada)
- Fix use-after-free in thermal_zone_device_unregister reported by
Kasan (Dmitry Osipenko)
* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Fix use-after-free in thermal_zone_device_unregister()
thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers: Off fixes in:
- idxd
- at_hdmac
- pl330
- dw-edma
- jz478
-----BEGIN PGP SIGNATURE-----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=DUvT
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of core fixes and odd driver fixes for dmaengine subsystem:
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"
* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
dmaengine: dw-edma: Fix scatter-gather address calculation
dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
dmaengine: idxd: reset states after device disable or reset
dmaengine: acpi: Put the CSRT table after using it
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes
-----BEGIN PGP SIGNATURE-----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=eBDY
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
* pm-cpufreq:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit 17839856fd ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa76 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4 ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Beware that the address size for x86-32 may exceed unsigned long.
[ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14
[ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int'
If we don't handle the wide addresses, the pages are mismapped and the
device read/writes go astray, detected as DMAR faults and leading to
device failure. The behaviour changed (from working to broken) in commit
fa954e6831 ("iommu/vt-d: Delegate the dma domain to upper layer"), but
the error looks older.
Fixes: fa954e6831 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: James Sewart <jamessewart@arista.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When memory encryption is active the device is likely not in a direct
mapped domain. Forbid using IOMMUv2 functionality for now until finer
grained checks for this have been implemented.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do not force devices supporting IOMMUv2 to be direct mapped when memory
encryption is active. This might cause them to be unusable because their
DMA mask does not include the encryption bit.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The BD718(37/47/50) regulator enable states can be controlled
either by SW or by PMIC internal state machine. The bd718x7
driver has not supported leaving the regulators under HW state
machine control (except for cases where this is required to
avoid boot-up problems due to critical regulators being turned
OFF at reset when SNVS used as reset state).
On some systems this is undesirable as there now are setups where
mixture of SW and HW state machine controlled regulators is needed.
Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators
then to be disabled (by PMIC state machine) while other regulators
should stay enabled (regardless of HW state => SW control required).
Add support for a new device-tree property
"rohm,no-regulator-enable-control" which can be used to leave
regulator(s) under HW state machine control.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/6ebba33dd08f2dcc9f1137bbff4d2dc905278a5a.1599029335.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ
============ ===========
irte.RemapEn=0
...
change IRTE IRQ from device ==> IO_PAGE_FAULT !!
...
irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e25 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the RemapEn (valid) bit is accidentally cleared when
programming IRTE w/ guestMode=0. It should be restored to
the prior state.
Fixes: b9fc6b56f4 ("iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).
Fixes: 55cdf0a283 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21 ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
