Commit graph

388,417 commits

Author SHA1 Message Date
Stephen Boyd
8cc7f5338e ARM: msm: Migrate to common clock framework
Move the existing clock code in mach-msm to the common clock
framework. We lose our capability to set the rate of and enable a
clock through debugfs. This is ok though because the debugfs
features are mainly used for testing and development of new clock
code.

To maintain compatibility with the original MSM clock code we
make a wrapper for clk_reset() that calls the struct msm_clk
specific reset function. This is necessary for the usb and sdcc
devices on MSM until a better suited API is made available.

Cc: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:08:05 -07:00
Stephen Boyd
421faca0b5 ARM: msm: Make proc_comm clock control into a platform driver
To move closer to the generic struct clock framework move the
proc_comm based clock code to a platform driver. The data
describing the struct clks still live in the devices-$ARCH file,
but the clock initialization is done at driver binding time.

Cc: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:07:53 -07:00
Stephen Boyd
2dfd9c1f77 ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
In the near future we'll be moving clock-pcom to a platform
driver, in which case these two users of clk_get() in mach-msm
need to be updated. Have board-trout-panel.c make the proc_comm
call directly so that we don't have to port this board specific
code to the driver right now and reorder the initcall order of
dma.c so that it initializes after the clock driver probes but
before any drivers use dma APIs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:43 -07:00
Stephen Boyd
42a9ed5dbe ARM: msm: Remove clock-7x30.h include file
This file is not used outside of the two users in the clock-7x30
array. Those two clocks are virtual "source" clocks that don't
really need to exist outside of the clock driver. Let's remove
them from the array, since they're not doing anything anyway, and
then remove the clock-7x30.h include file along with it.

Cc: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:43 -07:00
Stephen Boyd
2f8b6fe4a9 ARM: msm: Remove custom clk_set_{max,min}_rate() API
There are no users of this API anymore so let's just remove it.
If a need arises in the future we can extend the common clock API
to handle it.

Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:43 -07:00
Stephen Boyd
85a7df1f85 ARM: msm: Remove custom clk_set_flags() API
Nobody is using this API upstream and it's just contributing
cruft. Remove it so the MSM clock API is closer to the generic
struct clock API.

Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:42 -07:00
Stephen Boyd
8d21415348 msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
Calling clk_set_min_rate() is no better than just calling
clk_set_rate() because MSM clock code already takes care of
calling the min_rate ops if the clock really needs
clk_set_min_rate() called on it.

Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:42 -07:00
Stephen Boyd
1107b1716b msm: iommu: Convert to clk_prepare/unprepare
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework. We never unprepare the clocks until
driver remove because the clocks are enabled and disabled in irq
context. Finer grained power management is possible in the future
via runtime power management techniques.

Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:42 -07:00
Stephen Boyd
7f371b9825 msm_sdcc: Convert to clk_prepare/unprepare
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.

Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:42 -07:00
Stephen Boyd
b99a8f621f usb: otg: msm: Convert to clk_prepare/unprepare
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:42 -07:00
Stephen Boyd
519b371dcd msm_serial: Use devm_clk_get() and properly return errors
Clocks are not clk_put() in this driver's error paths during
probe. The code that checks for clock errors also fails to
properly return the error code from the pclk member if it turns
out to be the failing clock, leading to potentially confusing
error values if the clk member is not an error pointer. Fix these
problems with devm_clk_get() and proper error checking.

Removing the clk_put() in msm_serial_remove() also points out
that msm_port is unused. Furthermore, msm_port is the wrong type
and so the clk_put() would be using the wrong pointer. Replace it
with the proper type and call uart_remove_one_port() to do the
proper cleanup.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:41 -07:00
Stephen Boyd
f98cf83d0c msm_serial: Convert to clk_prepare/unprepare
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-24 13:06:41 -07:00
Martin K. Petersen
56f2a8016e [SCSI] Workaround for disks that report bad optimal transfer length
Not all disks fill out the VPD pages correctly. Add a blacklist flag
that allows us ignore the SBC-3 VPD pages for a given device. The
BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages
scsi_device parameter to bypass VPD scanning.

Also blacklist the offending Seagate drive model.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 13:00:10 -07:00
Reddy, Sreekanth
c3a634bf78 [SCSI] mpt2sas: fix for unused variable 'event_data' warning
If CONFIG_SCSI_MPT2SAS_LOGGING is undefined, then these warnings are emitted

drivers/scsi/mpt2sas/mpt2sas_scsih.c: In function '_scsih_sas_broadcast_primitive_event'
drivers/scsi/mpt2sas/mpt2sas_scsih.c:5810:40: warning: unused variable 'event_data'

Use pr_info() function instead of dewtprintk().

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:55:34 -07:00
Sreekanth Reddy
627d1a1957 [SCSI] mpt2sas: Bump driver vesion to v15.100.00.00
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:54:23 -07:00
Sreekanth Reddy
148124d931 [SCSI] mpt2sas: Calulate the Reply post queue depth calculation as per the MPI spec
[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:52:47 -07:00
Sreekanth Reddy
48ba2efc38 [SCSI] mpt2sas: fix firmware failure with wrong task attribute
When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:49:56 -07:00
Sreekanth Reddy
6241f22ca1 [SCSI] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop
Modified device scan routine so each configuration page read breaks from the
while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS.

[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:47:27 -07:00
David S. Miller
a3d9dd89b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains five fixes for Netfilter/IPVS, they are:

* A skb leak fix in fragmentation handling in case that helpers are in place,
  it occurs since the IPV6 NAT infrastructure, from Phil Oester.

* Fix SCTP port mangling in ICMP packets for IPVS, from Julian Anastasov.

* Fix event delivery in ctnetlink regarding the new connlabel infrastructure,
  from Florian Westphal.

* Fix mangling in the SIP NAT helper, from Balazs Peter Odor.

* Fix crash in ipt_ULOG introduced while adding netnamespace support,
  from Gao Feng.

I'll take care of passing several of these patches to -stable once they hit
Linus' tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 12:45:24 -07:00
David S. Miller
d3c5f47ee2 net: Restore unintentional reverts.
This restores commits:

c573972c11
1a5904342c
da2e2c2149

which initially accidently went into 'net', were
reverted there, and then properly placed into 'net-next'.
But the next net --> net-next merge accidently wiped them
out again.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 12:43:40 -07:00
Sreekanth Reddy
ca6832e91b [SCSI] mpt2sas: Update the timing requirements for issuing a Hard Reset
Updated the mpt2sas driver code that issues hard reset to comply with the
timing requirements mentioned in MPI specifications rev V.

[jejb: checpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:43:15 -07:00
Sreekanth Reddy
10ec24e4ce [SCSI] mpt2sas: MPI2 Rev W (2.00.15) specification
Change set in MPI 2.0 Rev W(2.00.15) specification and 2.00.27 header files

1. Added a bit to the IOCExceptions field of the IOCFacts Reply to indicate
   that the IOC detected a partial memory failure.
2. Added ElapsedSeconds field to RAID Volume Indicator Structure. Added
   Elapsed Seconds Valid flag to Flags field of this structure.
3. Added ElapsedSeconds field to Integrated RAID Operations Status Event Data.
4. In the IOCSettings field of BIOS Page 1, modified the Adapter Support bits
   description to specify X86 BIOS.
5. Toolbox Diagnostic CLI Tool Request may now use chain elements in the SGL.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:40:02 -07:00
Matteo Facchinetti
0875a88e85 powerpc/mpc512x: add MPC5125 reset module support for system restart
Only part of MPC5125 reset module is like as MPC5121.
In detail, RCWH register doesn't contain informations about:
- PCI arbiter
- NAND flash page size
- NAND flash port size

For this reason, in device tree, this module has a different name then
MPC5121 reset module but use the same "struct mpc512x_reset_module"
register definition and the same restart procedure.

Signed-off-by: Matteo Facchinetti <engineering@sirius-es.it>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-06-24 21:36:49 +02:00
Reddy, Sreekanth
b0df96a006 [SCSI] mpt2sas: Fix for issue Missing delay not getting set during system bootup
Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked.  The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 12:35:34 -07:00
Ben Hutchings
636d73da27 sfc: Improve test for IOMMU in use
The device::iommu_group field may be set even if no IOMMU is in use.
iommu_present() is still a better indicator, although it doesn't tell
us whether *our* device is affected.

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 20:02:53 +01:00
Ben Hutchings
1899c111a5 sfc: Fix IRQ cleanup in case of a probe failure
The lifetime of an irq_cpu_rmap is odd: we have to allocate it before
installing IRQ handlers and free it before removing the IRQ handlers.
As a result of this asymmetry, it was omitted from some failure paths.

On another failure path, we could try to remove IRQ handlers we
had not yet installed.

Move the irq_cpu_rmap allocation and freeing alongside IRQ handler
installation and removal, in efx_nic_{init,fini}_interrupts().
Count the number of IRQ handlers successfully installed and only
remove those on the failure path.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 20:02:52 +01:00
Ben Hutchings
e79255de85 sfc: Do not pass non-TCP packets into GRO code
GRO can handle non-TCP packets and pass them up without coalescing,
but it has to do some extra work to parse the packet which we can
bypass using the hardware parse result.  (This condition yields a
false negative for TCP/IPv6 packets received by Falcon, but its
performance is already poor in that case due to lack of checksum
offload.)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 20:00:32 +01:00
Ben Hutchings
d07df8ec08 sfc: Define and set RX buffer flag for packets parsed as TCP
This will be useful for shortcutting some software packet parsing.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:32 +01:00
Andy Lutomirski
3ea84c5492 sfc: Enable accelerated RFS on vlans
As far as I know, the hardware doesn't support matching on both IP
fields and vlan tag, but it can at least match on the IP fields.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:30 +01:00
Ben Hutchings
62ebac926b sfc: Report software timestamping capabilities
The kernel can generate software receive timestamps and we should
report those for all ports regardless of hardware capabilities.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:29 +01:00
Jon Cooper
d4ef5b6f37 sfc: Increase size of RX SKB header area
This allows the SKB to hold the headers without reallocation more often.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:28 +01:00
Jon Cooper
c99dffc417 sfc: Enable RX checksum offload for packets not handled by GRO
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:27 +01:00
Alexandre Rames
b28405b0f2 sfc: Fix EEH with legacy interrupts.
PCI legacy interrupts are level-triggered, and we cannot mask them up
on an isolated device.  Instead, disable the IRQ at the controller
until we have recovered.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24 19:58:25 +01:00
John W. Linville
9fbdc75116 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-06-24 14:45:50 -04:00
John W. Linville
66ba271ab9 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-06-24 14:44:59 -04:00
Sujith Manoharan
2b5e54e22f ath9k: Add support for AR9462 2.1
Various parts of the HW code are applicable for
both v2.0 and v2.1.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:28 -04:00
Sujith Manoharan
d567e4eb80 ath9k: Program initvals for AR9462 2.1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:28 -04:00
Sujith Manoharan
12c75ef8c3 ath9k: Add initvals for AR9462 2.1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:28 -04:00
Sujith Manoharan
7c676d953f ath9k: Add version macros for AR9462 2.1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:27 -04:00
Larry Finger
73e088ed17 rtlwifi: rtl8723ae: Fix typo in firmware names
The driver loads its firmware from files rtlwifi/rtl8723fw*.bin, but the
MODULE_FIRMWARE macros refer to rtlwifi/RTL8723aefw*.bin.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>  [3.8+]
Reported-by: Axel Köllhofer <AxelKoellhofer@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:27 -04:00
Kirshenbaum Erez
668b2bbd7f wil6210: add HW write-back option in TX descriptor
Map BIT 9 in TX DMA DWARD 0 as HW write back option.
We must turn on this option in the last TX descriptor,
this is required for old HW compatability.
This option indicate to HW that WB is required for this descriptor.

Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:26 -04:00
Kirshenbaum Erez
99b55bd22a wil6210: set vring index for all descriptors
The vring index (MAC queue id) must be set in all TX descriptors
otherwise HW will fail to release descriptors for a specific vring
(disconnect or vring switch flows).
This is normally occurs when fragmentation required, if vring index
will not be the same for all SKB descriptors HW will fail to flush
this MAC queue.

Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:26 -04:00
Gabor Juhos
150cc69267 rt2x00: rt2800: unify [RT]XWI_SIZE defines
Use common names instead of chip specific ones.
The patch contains no functional changes, but
it makes it easier to add support for further
descriptor sizes.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:26 -04:00
Gabor Juhos
a53aff5da6 rt2x00: rt2800pci: don't use TXWI_DESC_SIZE directly
Different chipsets may use different TXWI descriptor
size. Instead of using a hardcoded value, use the
'queue->winfo_size' which holds the correct value for
a given device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:25 -04:00
Gabor Juhos
0a6f3a8eba rt2x00: read 5GHz TX power values from the correct offset
The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value
for a given channel.

The changes in rt61pci.c and rt73usb.c are compile
tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: stable@vger.kernel.org
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:25 -04:00
Dan Carpenter
428e3cf5f9 ipw2x00: printing the wrong array in debug code
Smatch complains that this is a read past the end of the array.  It
turns out we are printing the wrong array here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:25 -04:00
Sujith Manoharan
fca3c21d56 ath9k: Enable WoW only for supported models
Since platform support is required for WoW, identify and
and enable Wow only for supported cards.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:24 -04:00
Solomon Peachy
7258416c51 cw1200: Fix up a large pile of sparse warnings
Most of these relate to endianness problems, and are purely cosmetic.

But a couple of them were legit -- listen interval parsing and some of
the rate selection code would malfunction on BE systems.

There's still one cosmetic warning remaining, in the (admittedly) ugly
code in cw1200_spi.c.  It's there because the hardware needs 16-bit SPI
transfers, but many SPI controllers only operate 8 bits at a time.

If there's a cleaner way of handling this, I'm all ears.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:24 -04:00
Wei Yongjun
5d9e3bc21c ipw2200: fix error return code in ipw_load()
Fix to return -ENOMEM in the ipw_rx_queue_alloc() error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:23 -04:00
Felix Fietkau
f56e121df3 ath9k: fix queue depth accounting in ath_tx_txqaddbuf
ath_tx_txqaddbuf assumes that all the linked buffers in the queue passed
to it are part of the same A-MPDU or MPDU. The CAB queue rework violates
this assumption, which can cause the internal queue depth to go
negative.
Fix this by increasing the counter for all slots of [bf, bf->bf_lastbf]

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24 14:44:23 -04:00