[ Upstream commit 5ceaebcda9 ]
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02fe0fbd8a ]
In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):
trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33
This causes I2C transfer being aborted in polled mode from a stop completion
handler:
trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10
Clearing the START flag after read fixes the issue without any obvious
side effects.
This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2191b1dfef ]
When link modes were initially added in commit 2c76267943
("net/mlx4_en: Use PTYS register to query ethtool settings") and
later updated for the new ethtool API in commit 3d8f7cc78d
("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT
link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR.
It looks like these got picked to represent other modes since nothing
better was available.
Switch to using more specific link modes added in commit 5711a98221
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Tested with MCX311A-XCAT connected via DAC.
Before:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseKX/Full
10000baseKR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
With this change:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Signed-off-by: Erik Ekman <erik@kryo.se>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e9679738a ]
Revert commit b4b844930f ("tty: serial: fsl_lpuart: drop earlycon entry
for i.MX8QXP"), because this breaks earlycon support on imx8qm/imx8qxp.
While it is true that for earlycon there is no difference between
i.MX8QXP and i.MX7ULP (for now at least), there are differences
regarding clocks and fixups for wakeup support. For that reason it was
deemed unacceptable to add the imx7ulp compatible to device tree in
order to get earlycon working again.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211124073109.805088-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53ae723091 ]
Building with clang & LLVM_IAS=1 leads to an error:
arch/s390/lib/test_unwind.c:179:4: error: invalid register pair
" mvcl %%r1,%%r1\n"
^
The test creates an invalid instruction that would trap at runtime, but the
LLVM inline assembler tries to validate it at compile time too.
Use the raw instruction opcode instead.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1421
Link: https://lore.kernel.org/r/20211117174822.3632412-1-ilie.halip@gmail.com
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[hca@linux.ibm.com: use illegal opcode, and update comment]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83bb2c1a01 ]
In order to be able to use primitives such as vcpu_mode_is_32bit(),
we need to synchronize the guest PSTATE. However, this is currently
done deep into the bowels of the world-switch code, and we do have
helpers evaluating this much earlier (__vgic_v3_perform_cpuif_access
and handle_aarch32_guest, for example).
Move the saving of the guest pstate into the early fixups, which
cures the first issue. The second one will be addressed separately.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d03fcc1de0 ]
If you happened to try to access `/dev/drm_dp_aux` devices provided by
the MSM DP AUX driver too early at bootup you could go boom. Let's
avoid that by only allowing AUX transfers when the controller is
powered up.
Specifically the crash that was seen (on Chrome OS 5.4 tree with
relevant backports):
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3131 Comm: fwupd Not tainted 5.4.144-16620-g28af11b73efb #1
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Call trace:
dump_backtrace+0x0/0x14c
show_stack+0x20/0x2c
dump_stack+0xac/0x124
panic+0x150/0x390
nmi_panic+0x80/0x94
arm64_serror_panic+0x78/0x84
do_serror+0x0/0x118
do_serror+0xa4/0x118
el1_error+0xbc/0x160
dp_catalog_aux_write_data+0x1c/0x3c
dp_aux_cmd_fifo_tx+0xf0/0x1b0
dp_aux_transfer+0x1b0/0x2bc
drm_dp_dpcd_access+0x8c/0x11c
drm_dp_dpcd_read+0x64/0x10c
auxdev_read_iter+0xd4/0x1c4
I did a little bit of tracing and found that:
* We register the AUX device very early at bootup.
* Power isn't actually turned on for my system until
hpd_event_thread() -> dp_display_host_init() -> dp_power_init()
* You can see that dp_power_init() calls dp_aux_init() which is where
we start allowing AUX channel requests to go through.
In general this patch is a bit of a bandaid but at least it gets us
out of the current state where userspace acting at the wrong time can
fully crash the system.
* I think the more proper fix (which requires quite a bit more
changes) is to power stuff on while an AUX transfer is
happening. This is like the solution we did for ti-sn65dsi86. This
might be required for us to move to populating the panel via the
DP-AUX bus.
* Another fix considered was to dynamically register / unregister. I
tried that at <https://crrev.com/c/3169431/3> but it got
ugly. Currently there's a bug where the pm_runtime() state isn't
tracked properly and that causes us to just keep registering more
and more.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211109100403.1.I4e23470d681f7efe37e2e7f1a6466e15e9bb1d72@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd92cc187c ]
If "data_lanes" property of the dsi output endpoint is missing in
the DT, num_data_lanes would be 0 by default, which could cause
dsi_host_attach() to fail if dsi->lanes is set to a non-zero value
by the bridge driver.
According to the binding document of msm dsi controller, the
input/output endpoint of the controller is expected to have 4 lanes.
So let's set num_data_lanes to 4 by default.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba873e66e ]
Avoid a possible uninitialized use of gpu_scid variable to fix the
below smatch warning:
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:1480 a6xx_llc_activate()
error: uninitialized symbol 'gpu_scid'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118154903.3.Ie4ac321feb10168af569d9c2b4cf6828bed8122c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b503de239f ]
The driver currently assumes that the notify callback is only received
when the device is done with all the queued buffers.
However, this is not true, since the notify callback could be called
without any of the queued buffers being completed (for example, with
virtio-pci and shared interrupts) or with only some of the buffers being
completed (since the driver makes them available to the device in
multiple separate virtqueue_add_sgs() calls).
This can lead to incorrect data on the I2C bus or memory corruption in
the guest if the device operates on buffers which are have been freed by
the driver. (The WARN_ON in the driver is also triggered.)
BUG kmalloc-128 (Tainted: G W ): Poison overwritten
First byte 0x0 instead of 0x6b
Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28
memdup_user+0x2e/0xbd
i2cdev_ioctl_rdwr+0x9d/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28
kfree+0x1bd/0x1cc
i2cdev_ioctl_rdwr+0x1bb/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Fix this by calling virtio_get_buf() from the notify handler like other
virtio drivers and by actually waiting for all the buffers to be
completed.
Fixes: 3cfc883804 ("i2c: virtio: add a virtio i2c frontend driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f71ef02f1a ]
'Commit 39f9895a00 ("vmxnet3: add support for 32 Tx/Rx queues")'
added support for 32Tx/Rx queues. Within that patch, value of
VMXNET3_LINUX_MIN_MSIX_VECT was updated.
However, there is a case (numvcpus = 2) which actually requires 3
intrs which matches VMXNET3_LINUX_MIN_MSIX_VECT which then is
treated as failure by stack to allocate more vectors. This patch
fixes this issue.
Fixes: 39f9895a00 ("vmxnet3: add support for 32 Tx/Rx queues")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20211207081737.14000-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f23ab04dd6 ]
When VF is being reset, ice_reset_vf() will be called and FDIR
resource should be released and initialized again.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10467ce09f ]
Completion events (CEs) are lost if the application is allowed to arm the
CQ more than two times when no new CE for this CQ has been generated by
the HW.
Check if arming has been done for the CQ and if not, arm the CQ for any
event otherwise promote to arm the CQ for any event only when the last arm
event was solicited.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20211201231509.1930-2-shiraz.saleem@intel.com
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117697cc93 ]
'pchunk->bitmapbuf' is a bitmap. Its size (in number of bits) is stored in
'pchunk->sizeofbitmap'.
When it is allocated, the size (in bytes) is computed by:
size_in_bits >> 3
There are 2 issues (numbers bellow assume that longs are 64 bits):
- there is no guarantee here that 'pchunk->bitmapmem.size' is modulo
BITS_PER_LONG but bitmaps are stored as longs
(sizeofbitmap=8 bits will only allocate 1 byte, instead of 8 (1 long))
- the number of bytes is computed with a shift, not a round up, so we
may allocate less memory than needed
(sizeofbitmap=65 bits will only allocate 8 bytes (i.e. 1 long), when 2
longs are needed = 16 bytes)
Fix both issues by using 'bitmap_zalloc()' and remove the useless
'bitmapmem' from 'struct irdma_chunk'.
While at it, remove some useless NULL test before calling
kfree/bitmap_free.
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://lore.kernel.org/r/5e670b640508e14b1869c3e8e4fb970d78cbe997.1638692171.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e11a39a82 ]
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE
info list.
Add the chunk entry to the PBLE info list only after successful setting of
the SD in irdma_hmc_sd_one.
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Link: https://lore.kernel.org/r/20211207152135.2192-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a897531e0 ]
When building bpf_skel with clang-10, typedef causes confusions like:
libbpf: map 'prev_readings': unexpected def kind var.
Fix this by removing the typedef.
Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/BEF5C312-4331-4A60-AEC0-AD7617CB2BC4@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b54472a02c ]
The if/then schema for 'data-lanes' doesn't work as 'compatible' is at a
different level than 'data-lanes'. To make it work, the if/then schema
would have to be moved to the top level and then whole hierarchy of
nodes down to 'data-lanes' created. I don't think it is worth the
complexity to do that, so let's just drop it.
The error in this schema is masked by a fixup in the tools causing the
'allOf' to get overwritten. Removing the fixup as part of moving to
json-schema draft 2019-09 revealed the issue:
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@30750000: ports:port@0:endpoint:data-lanes:0: [1] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@32e30000: ports:port@0:endpoint:data-lanes:0: [1, 2, 3, 4] is too long
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
The if condition was always true because 'compatible' did not exist in
'endpoint' node and a non-existent property is true for json-schema.
Fixes: 85b62ff2cb ("media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM support")
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-media@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20211203164828.187642-1-robh@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36a65982a9 ]
When the NV-DDR interface is not supported by the NAND chip,
the value of onfi->nvddr_timing_modes is 0. In this case,
the best_mode variable value in nand_choose_best_nvddr_timings()
is -1. The last for-loop is skipped and the function returns an
uninitialized value.
If this returned value is 0, the nand_choose_best_sdr_timings()
is not executed and no 'best timing' are set. This leads the host
controller and the NAND chip working at default mode 0 timing
even if a better timing can be used.
Fix this uninitialized returned value.
nand_choose_best_sdr_timings() is pretty similar to
nand_choose_best_nvddr_timings(). Even if onfi->sdr_timing_modes
should never be seen as 0, nand_choose_best_sdr_timings() returned
value is fixed.
Fixes: a9ecc8c814 ("mtd: rawnand: Choose the best timings, NV-DDR included")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-3-herve.codina@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16d8b628a4 ]
NAND_OP_CMD() expects a delay parameter in nanoseconds.
The delay value is wrongly given in milliseconds.
Fix the conversion macro used in order to set this
delay in nanoseconds.
Fixes: d7a773e881 ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-2-herve.codina@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ae4afe3d ]
For the case of IB_MR_TYPE_DM the mr does doesn't have a umem, even though
it is a user MR. This causes function mlx5_free_priv_descs() to think that
it is a kernel MR, leading to wrongly accessing mr->descs that will get
wrong values in the union which leads to attempt to release resources that
were not allocated in the first place.
For example:
DMA-API: mlx5_core 0000:08:00.1: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=0 bytes]
WARNING: CPU: 8 PID: 1021 at kernel/dma/debug.c:961 check_unmap+0x54f/0x8b0
RIP: 0010:check_unmap+0x54f/0x8b0
Call Trace:
debug_dma_unmap_page+0x57/0x60
mlx5_free_priv_descs+0x57/0x70 [mlx5_ib]
mlx5_ib_dereg_mr+0x1fb/0x3d0 [mlx5_ib]
ib_dereg_mr_user+0x60/0x140 [ib_core]
uverbs_destroy_uobject+0x59/0x210 [ib_uverbs]
uobj_destroy+0x3f/0x80 [ib_uverbs]
ib_uverbs_cmd_verbs+0x435/0xd10 [ib_uverbs]
? uverbs_finalize_object+0x50/0x50 [ib_uverbs]
? lock_acquire+0xc4/0x2e0
? lock_acquired+0x12/0x380
? lock_acquire+0xc4/0x2e0
? lock_acquire+0xc4/0x2e0
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
? lock_release+0x28a/0x400
ib_uverbs_ioctl+0xc0/0x140 [ib_uverbs]
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
__x64_sys_ioctl+0x7f/0xb0
do_syscall_64+0x38/0x90
Fix it by reorganizing the dereg flow and mlx5_ib_mr structure:
- Move the ib_umem field into the user MRs structure in the union as it's
applicable only there.
- Function mlx5_ib_dereg_mr() will now call mlx5_free_priv_descs() only
in case there isn't udata, which indicates that this isn't a user MR.
Fixes: f18ec42231 ("RDMA/mlx5: Use a union inside mlx5_ib_mr")
Link: https://lore.kernel.org/r/66bb1dd253c1fd7ceaa9fc411061eefa457b86fb.1637581144.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b01721e8 ]
On error handling path in rxe_qp_from_init() qp->sq.queue is freed and
then rxe_create_qp() will drop last reference to this object. qp clean up
function will try to free this queue one time and it causes UAF bug.
Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init().
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20211121202239.3129-1-paskripkin@gmail.com
Reported-by: syzbot+aab53008a5adf26abe91@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When backporting 33b8aad21a ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.
Fix this up manually by setting the correct mode.
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b560b21f71 upstream.
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a663bd1911 upstream.
The driver refuses to probe with -EINVAL since the commit 5d9814df0a
("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock
available").
Before the driver used to probe successfully if either "clock-freq" or
"clock-frequency" properties has been specified in the device tree.
That commit changed
if (A && B)
panic("No clock nor clock-frequency property");
into
if (!A && !B)
return 0;
That's a bug: the reverse of `A && B` is '!A || !B', not '!A && !B'
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Fixes: 5d9814df0a ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available").
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20211109153401.157491-1-asheplyakov@basealt.ru
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a1bf591e9 upstream.
The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5e0cbe285 upstream.
According to ARM(v7M) ARM Interrupt Priority Offsets located at
0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only
Interrupt Active Bit Registers
Fixes: 292ec08049 ("irqchip: Add support for ARMv7-M NVIC")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b383a42ca5 upstream.
INVALL CMD specifies that the ITS must ensure any caching associated with
the interrupt collection defined by ICID is consistent with the LPI
configuration tables held in memory for all Redistributors. SYNC is
required to ensure that INVALL is executed.
Currently, LPI configuration data may be inconsistent with that in the
memory within a short period of time after the INVALL command is executed.
Signed-off-by: Wudi Wang <wangwudi@hisilicon.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: cc2d3216f5 ("irqchip: GICv3: ITS command queue")
Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b37498653 upstream.
We should defer eventfd_signal() to the workqueue when
eventfd_signal_allowed() return false rather than return
true.
Fixes: b542e383d8 ("eventfd: Make signal recursion protection a task bit")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210913111928.98-1-xieyongji@bytedance.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0a553502e upstream.
irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into
msi_domain_info structure. But allocated interrupt numbers for Multi-MSI
needs to be properly aligned otherwise devices send MSI interrupt with
wrong number.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area() to allocate aligned interrupt numbers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a71b9412c9 ("irqchip/armada-370-xp: Allow allocation of multiple MSIs")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce20eff573 upstream.
IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: fcc392d501 ("irqchip/armada-370-xp: Use the generic MSI infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8958389681 upstream.
The interrupt status bits are cleared by writing 1, we should force a
write to clear the interrupt without checking if the value has changed.
Fixes: 04f605906f ("irqchip: Add Aspeed SCU interrupt controller")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211124094348.11621-1-billy_tsai@aspeedtech.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab2d3fd68 upstream.
For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.
Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179
Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c0 ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2022cbec9 upstream.
For Foxconn T99W175 device(sdx55 platform) in some host platform,
it would be unavailable once the host execute the err handler.
After checking, it's caused by the delay time too short to
get a successful reset.
Please see my test evidence as bewlow(BTW, I add some extra test logs
in function mhi_pci_reset_prepare and mhi_pci_reset_done):
When MHI_POST_RESET_DELAY_MS equals to 500ms:
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed
When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms:
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state
Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller
When MHI_POST_RESET_DELAY_MS equals to 2000ms:
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset
Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON
Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success
Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode
I also tried big data like 3000, and it worked as well. 500ms may not be
enough for all support mhi device. We shall increase it to 2000ms
at least.
Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com
[mani: massaged commit message little bit, added Fixes tag and CCed stable]
Fixes: 8ccc3279fc ("mhi: pci_generic: Add support for reset")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
