[ Upstream commit 6f93616a73 ]
If a transaction fails the final validation in the commit hook, the table
validation state is changed to NFT_VALIDATE_DO and a replay of the batch is
performed. Every rule insert will then do a graph validation.
This is much slower, but provides better error reporting to the user
because we can point at the rule that introduces the validation issue.
Without this reset the affected table(s) remain in full validation mode,
i.e. on next transaction we start with slow-mode.
This makes the next transaction after a failed incremental update very slow:
# time iptables-restore < /tmp/ruleset
real 0m0.496s [..]
# time iptables -A CALLEE -j CALLER
iptables v1.8.11 (nf_tables): RULE_APPEND failed (Too many links): rule in chain CALLEE
real 0m0.022s [..]
# time iptables-restore < /tmp/ruleset
real 1m22.355s [..]
After this patch, 2nd iptables-restore is back to ~0.5s.
Fixes: 9a32e98506 ("netfilter: nf_tables: don't write table validation state without mutex")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1696c8bd0 ]
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d8765 ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a14e91b6d ]
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20260113-mctp-read-fix-v1-1-70c4b59c741c@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4744e173 ]
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2a14e91b6d ("mctp i2c: initialise event handler read bytes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77449e453d ]
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete.
Fixes: 576215cffd ("fs: Drop wait_unfrozen wait queue")
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Link: https://patch.msgid.link/20260115213103.1089129-1-abhishekbapat@google.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f5a55b70 ]
The functon dm_blk_report_zones reads md->zone_revalidate_map, however it
may change while the function is running. Use READ_ONCE.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c405fdbe ]
The function dm_blk_report_zones tests if the device is suspended with
the "dm_suspended_md" call. However, this function is called without
holding any locks, so the device may be suspended just after it.
Move the call to dm_suspended_md after dm_get_live_table, so that the
device can't be suspended after the suspended state was tested.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01464a3fdf ]
pcie_port_probe_service() unconditionally calls get_device() (unless it
fails). So drop that reference also unconditionally as it's fine for a
PCIe driver to not have a remove callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/e1c68c3b3f1af8427e98ca5e2c79f8bf0ebe2ce4.1764688034.git.u.kleine-koenig@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73711730a1 ]
The bit for enabling extended tags is Reserved and Preserved (RsvdP) for
VFs, according to PCIe r7.0 section 7.5.3.4 table 7.21. Hence, bail out
early from pci_configure_extended_tags() if the device is a VF.
Otherwise, we may see incorrect log messages such as:
kernel: pci 0000:af:00.2: enabling Extended Tags
(af:00.2 is a VF)
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251112095442.1913258-1-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6220694c52 ]
When vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap()
doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquired
after gen_pool_alloc_owner(), and memunmap_pages() will hang forever when
trying to remove the PCI device.
Fix it by adding the missed percpu_ref_put().
Fixes: 7e9c7ef83d ("PCI/P2PDMA: Allow userspace VMA allocations through sysfs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073ea5161 ]
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d98208450 ]
When transitioning to D3cold, __pci_set_power_state() first transitions to
D3hot. If the device was already in D3hot, this adds excess work:
(a) read/modify/write PMCSR; and
(b) excess delay (pci_dev_d3_sleep()).
For (b), we already performed the necessary delay on the previous D3hot
entry; this was extra noticeable when evaluating runtime PM transition
latency.
Check whether we're already in the target state before continuing.
Note that __pci_set_power_state() already does this same check for other
state transitions, but D3cold is special because __pci_set_power_state()
converts it to D3hot for the purposes of PMCSR.
This seems to be an oversight in commit 0aacdc9574 ("PCI/PM: Clean up
pci_set_low_power_state()").
Fixes: 0aacdc9574 ("PCI/PM: Clean up pci_set_low_power_state()")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bhelgaas: reverse test to match other "dev->current_state == state" cases]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251003154008.1.I7a21c240b30062c66471329567a96dceb6274358@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0c6da5be ]
Fix copy & paste errors by changing the references from 'ntb' to 'vntb'.
Fixes: 4ac8c8e52c ("Documentation: PCI: Add specification for the PCI vNTB function device")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[mani: squashed the patches and fixed more errors]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f0cdcddf8 ]
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e33c1dba2 ]
When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify()
configures the driver for direct mode. The subsequent
pmbus_identify_common() check then fails due to a mismatch
between the reported mode and the configured mode, causing
device initialization to fail.
Override the reported VOUT_MODE to direct mode to keep the
driver configuration consistent with the reported mode and
allow successful device initialization.
This does not change how voltages are interpreted, but avoids
a false identification failure caused by mismatched mode
handling.
Fixes: f20b4a9311 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://lore.kernel.org/r/20260210-dt-bindings-hwmon-pmbus-mpq8785-add-mpq8786-support-v3-1-84636ccfe76f@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c27291468e ]
Add support for the Monolithic Power Systems MPM82504 digital voltage
regulator. MPM82504 uses PMBus direct format for voltage output.
Tested with device tree based matching.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20250511035701.2607947-5-paweldembicki@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 9e33c1dba2 ("hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc1a4bab48 ]
Implement support for setting the VOUT_SCALE_LOOP PMBus register
based on an optional device tree property
"mps,vout-fb-divider-ratio-permille".
This allows the driver to provide the correct VOUT value depending
on the feedback voltage divider configuration for chips where the
bootloader does not configure the VOUT_SCALE_LOOP register.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20250511035701.2607947-4-paweldembicki@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 9e33c1dba2 ("hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc6020dc4 ]
Refactor the driver to support multiple Monolithic Power Systems devices.
Introduce chip ID handling based on device tree matching.
No functional changes intended.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20250511035701.2607947-3-paweldembicki@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 9e33c1dba2 ("hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bde3e395a ]
This reverts commit 6946c726c3.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix.
Reported-by: Jean Delvare <jdelvare@suse.de>
Closes: https://lore.kernel.org/linux-hwmon/20260121095342.73e723cb@endymion/
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Junrui Luo <moonafterrain@outlook.com>
Fixes: 6946c726c3 ("hwmon: (ibmpex) fix use-after-free in high/low store")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af56f30c4 ]
The Makefile for the SPI tools creates an include/linux/spi folder and some
symlinks inside it. After running `make -C spi/tools`, this folder shows up
as untracked in the git status.
Add the above folder to the .gitignore file.
Fixes: f325b73dc4 ("spi: tools: move to tools buildsystem")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260209095001.556495-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56f7db581e ]
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Fixes: 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0496fc9cdc ]
Commit 8e5d9f916a ("smack: deduplicate xattr setting in
smack_inode_init_security()") introduced xattr_dupval() to simplify setting
the xattrs to be provided by the SMACK LSM on inode creation, in the
smack_inode_init_security().
Unfortunately, moving lsm_get_xattr_slot() caused the SMACK64TRANSMUTE
xattr be added in the array of new xattrs before SMACK64. This causes the
HMAC of xattrs calculated by evm_init_hmac() for new files to diverge from
the one calculated by both evm_calc_hmac_or_hash() and evmctl.
evm_init_hmac() calculates the HMAC of the xattrs of new files based on the
order LSMs provide them, while evm_calc_hmac_or_hash() and evmctl calculate
the HMAC based on an ordered xattrs list.
Fix the issue by making evm_init_hmac() calculate the HMAC of new files
based on the ordered xattrs list too.
Fixes: 8e5d9f916a ("smack: deduplicate xattr setting in smack_inode_init_security()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40d3ac25c1 ]
If a frame has size of less or equal than one packet size
uvc_alloc_urb_buffers() is unable to allocate memory for it due to a
off-by-one error.
Fix the off-by-one-error and now that we are at it, make sure that
stream->urb_size has always a valid value when we return from the
function, even when an error happens.
Fixes: efdc8a9585 ("V4L/DVB (10295): uvcvideo: Retry URB buffers allocation when the system is low on memory.")
Reported-by: Itay Chamiel <itay.chamiel@q.ai>
Closes: https://lore.kernel.org/linux-media/CANiDSCsSoZf2LsCCoWAUbCg6tJT-ypXR1B85aa6rAdMVYr2iBQ@mail.gmail.com/T/#t
Co-developed-by: Itay Chamiel <itay.chamiel@q.ai>
Signed-off-by: Itay Chamiel <itay.chamiel@q.ai>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Itay Chamiel <itay.chamiel@q.ai>
Link: https://patch.msgid.link/20260114-uvc-alloc-urb-v1-1-cedf3fb66711@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1adf48853 ]
The 'dev' field in struct fwnode is special and related to device links,
There no driver should use it for printing messages. Fix incorrect use
of private field.
Fixes: affc804c44 ("platform/chrome: cros_typec_switch: Add switch driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260120131413.1697891-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d05077724 ]
During initialization of DRM buddy memory manager at drm_buddy_init,
mm->free_trees array is allocated for both clear and dirty RB trees.
During cleanup happening at drm_buddy_fini it is never freed, leading to
following memory leaks observed on xe module load & unload cycles:
kmemleak_alloc+0x4a/0x90
__kmalloc_cache_noprof+0x488/0x800
drm_buddy_init+0xc2/0x330 [drm_buddy]
__xe_ttm_vram_mgr_init+0xc3/0x190 [xe]
xe_ttm_stolen_mgr_init+0xf5/0x9d0 [xe]
xe_device_probe+0x326/0x9e0 [xe]
xe_pci_probe+0x39a/0x610 [xe]
local_pci_probe+0x47/0xb0
pci_device_probe+0xf3/0x260
really_probe+0xf1/0x3c0
__driver_probe_device+0x8c/0x180
driver_probe_device+0x24/0xd0
__driver_attach+0x10f/0x220
bus_for_each_dev+0x7f/0xe0
driver_attach+0x1e/0x30
bus_add_driver+0x151/0x290
Deallocate array for free trees when cleaning up buddy memory manager
in the same way as if going through out_free_tree label.
Fixes: d4cd665c98 ("drm/buddy: Separate clear and dirty free block trees")
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20251208102714.4008260-2-michal.grzelak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3085977e73 ]
We need to set correct mode for PLL to calculate correct frequency.
Signalling mode is known at this point, so use it for that.
Fixes: 47b6eaf36e ("media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY")
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
[Sakari Ailus: Drop extra newline.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6807641ac ]
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless().
Fixes: 51151098d7 ("HID: playstation: add DualSense classic rumble support.")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86a8eeb0e9 ]
Since commit 98e48cd928 ("regulator: core: resolve supply for
boot-on/always-on regulators"), set_machine_constraints() can return
-EPROBE_DEFER very late, after it has done a lot of work and
configuration of the regulator.
This means that configuration will happen multiple times for no
benefit in that case. Furthermore, this can lead to timing-dependent
voltage glitches as mentioned e.g. in commit 8a866d527a ("regulator:
core: Resolve supply name earlier to prevent double-init").
We can know that it's going to fail very early, in particular before
going through the complete regulator configuration by moving some code
around a little.
Do so to avoid re-configuring the regulator multiple times, also
avoiding the voltage glitches if we can.
Fixes: 98e48cd928 ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-3-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 794b0e68ca ]
Since DPU 8.x Watchdog timer settings were moved from the TOP to the
INTF block. Support programming the timer in the INTF block. Fixes tag
points to the commit which removed register access to those registers on
DPU 8.x+ (and which also should have added proper support for WD timer
on those devices).
Fixes: 43e3293fc6 ("drm/msm/dpu: add support for MDP_TOP blackhole")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696586/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-2-98203d150611@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ad9880f05 ]
Since DPU 5.x the vsync source TE setup is split between MDP TOP and
INTF blocks. Currently all code to setup vsync_source is only executed
if MDP TOP implements the setup_vsync_source() callback. However on
DPU >= 8.x this callback is not implemented, making DPU driver skip all
vsync setup. Move the INTF part out of this condition, letting DPU
driver to setup TE vsync selection on all new DPU devices.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Fixes: 2f69e54584 ("drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450")
[DB: restored top->ops.setup_vsync_source call]
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696584/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-1-98203d150611@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2892de3f4f ]
On SC7280 targets, display modes with a width greater than the
max_mixer_width (2400) are rejected during mode validation when
merge3d is disabled. This limitation exists because, without a
3D merge block, two layer mixers cannot be combined(non-DSC interface),
preventing large layers from being split across mixers. As a result,
higher resolution modes cannot be supported.
Enable merge3d support on SC7280 to allow combining streams from
two layer mixers into a single non-DSC interface. This capability
removes the width restriction and enables buffer sizes beyond the
2400-pixel limit.
Fixes: 591e34a091 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696713/
Link: https://lore.kernel.org/r/20260101-4k-v2-1-712ae3c1f816@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af26fa751c ]
vcn_v2_0_start_sriov() declares a local variable "i" initialized to zero
and uses it only as the instance index in SOC15_REG_OFFSET(UVD, i, ...).
The value is never changed and all other fields are taken from
adev->vcn.inst[0], so this path only ever programs VCN instance 0.
This triggered a Smatch:
warn: iterator 'i' not incremented
Replace the dummy iterator with an explicit instance index of 0 in
SOC15_REG_OFFSET() calls.
Fixes: dd26858a9c ("drm/amdgpu: implement initialization part on VCN2.0 for SRIOV")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: darlington Opara <darlington.opara@amd.com>
Cc: Jinage Zhao <jiange.zhao@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: Emily Deng <Emily.Deng@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31dc58adda ]
signal_eviction_fence() is declared to return bool, but returns -EINVAL
when no eviction fence is present. This makes the "no fence" or "the
NULL-fence" path evaluate to true and triggers a Smatch warning.
v2: Return true instead to explicitly indicate that there is no eviction
fence to signal and that eviction is already complete. This matches the
existing caller logic where a NULL fence means "nothing to do" and
allows restore handling to proceed normally. (Christian)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:2099 signal_eviction_fence()
warn: '(-22)' is not bool
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c
2090 static bool signal_eviction_fence(struct kfd_process *p)
^^^^
2091 {
2092 struct dma_fence *ef;
2093 bool ret;
2094
2095 rcu_read_lock();
2096 ef = dma_fence_get_rcu_safe(&p->ef);
2097 rcu_read_unlock();
2098 if (!ef)
--> 2099 return -EINVAL;
This should be either true or false.
Probably true because presumably
it has been tested?
2100
2101 ret = dma_fence_check_and_signal(ef);
2102 dma_fence_put(ef);
2103
2104 return ret;
2105 }
Fixes: 37865e02e6 ("drm/amdkfd: Fix eviction fence handling")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Gang BA <Gang.Ba@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8644084a74 ]
The behavior for amdgpu was changed with commit e00e5c2238
("drm/amdgpu: adjust drm_firmware_drivers_only() handling") to
potentially allow loading even if nomodeset was set, so the
message is no longer accurate.
Just drop it to avoid confusion.
Fixes: e00e5c2238 ("drm/amdgpu: adjust drm_firmware_drivers_only() handling")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a519e21e32 ]
In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70237853ed ]
The nau8821_enable_jack_detect() function was supposed to allow enabling
or disabling jack events reporting. However, once enabled, any
subsequent invocation would fail and the following splat is shown:
[ 3136.996771] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ 3136.996773] Workqueue: events_unbound deferred_probe_work_func
[ 3136.996780] Call Trace:
[ 3136.996782] <TASK>
[ 3136.996787] dump_stack_lvl+0x6e/0xa0
[ 3136.996796] __setup_irq.cold+0x9c/0xce
[ 3136.996803] ? __pfx_irq_default_primary_handler+0x10/0x10
[ 3136.996812] ? __pfx_nau8821_interrupt+0x10/0x10 [snd_soc_nau8821]
[ 3136.996825] request_threaded_irq+0xd9/0x160
[ 3136.996853] devm_request_threaded_irq+0x71/0xd0
[ 3136.996859] ? __pfx_nau8821_interrupt+0x10/0x10 [snd_soc_nau8821]
[ 3136.996882] nau8821_enable_jack_detect+0xa5/0xc0 [snd_soc_nau8821]
[ 3136.996901] acp5x_8821_init+0x8d/0xa0 [snd_soc_acp5x_mach]
[ 3136.996917] snd_soc_link_init+0x25/0x50 [snd_soc_core]
[ 3136.996958] snd_soc_bind_card+0x615/0xd00 [snd_soc_core]
[ 3136.997026] snd_soc_register_card+0x1b2/0x1c0 [snd_soc_core]
[ 3136.997064] devm_snd_soc_register_card+0x47/0x90 [snd_soc_core]
[ 3136.997108] acp5x_probe+0x72/0xb0 [snd_soc_acp5x_mach]
[...]
[ 3136.997508] nau8821 i2c-NVTN2020:00: Cannot request irq 58 (-16)
Introduce jdet_active flag to driver data structure and use it to
provide one-time initialization of the jack detection work queue and
related interrupt line.
Note this is also a prerequisite for additional fixes around module
unloading and suspend handling.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-1-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee70bacef1 ]
The interrupt handler offloads the microphone detection logic to
nau8821_jdet_work(), which implies a sleep operation. However, before
being able to process any subsequent hotplug event, the interrupt
handler needs to wait for any prior scheduled work to complete.
Move the sleep out of jdet_work by converting it to a delayed work.
This eliminates the undesired blocking in the interrupt handler when
attempting to cancel a recently scheduled work item and should help
reducing transient input reports that might confuse user-space.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-5-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 70237853ed ("ASoC: nau8821: Fixup nau8821_enable_jack_detect()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a698679fe8 ]
The interrupt handler attempts to perform some IRQ status clear
operations *after* rather than *before* unmasking and enabling
interrupts. This is a rather fragile approach since it may generally
lead to missing IRQ requests or causing spurious interrupts.
Make use of the nau8821_irq_status_clear() helper instead of
manipulating the related register directly and ensure any interrupt
clearing is performed *after* the target interrupts are disabled/masked
and *before* proceeding with additional interrupt unmasking/enablement
operations.
This also implicitly drops the redundant clear operation of the ejection
IRQ in the interrupt handler, since nau8821_eject_jack() has been
already responsible for clearing all active interrupts.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Fixes: 2551b6e899 ("ASoC: nau8821: Add headset button detection")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-3-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 70237853ed ("ASoC: nau8821: Fixup nau8821_enable_jack_detect()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33d589ed60 ]
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler)
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 565ed40b5f ]
Ensure all related groups are evicted and suspended before VM
destruction takes place.
This fixes an issue where panthor_vm_destroy() destroys and unmaps the
heap context while there are still on slot groups using this.
The FW will do a write out to the heap context when a CSG (group) is
suspended, so a premature unmap of the heap context will cause a
GPU page fault.
This page fault is quite harmless, and do not affect the continued
operation of the GPU.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251219093546.1227697-1-ketil.johnsen@arm.com
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b7c7bda39 ]
We used to have a variable declaration with __free() initialized with
NULL. This was to keep the old coding style rule, but recently it's
relaxed and rather recommends to follow the new rule to declare in
place of use for __free() -- which avoids potential deadlocks or UAFs
with nested cleanups.
Although the current code has no bug, per se, let's follow the new
standard and move the declaration to the place of assignment (or
directly assign the allocated result) instead of NULL initializations.
Fixes: fb9e197f3f ("ALSA: vmaster: Use automatic cleanup of kfree()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251216140634.171890-9-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
