Commit graph

766,493 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
a31d19f889 media: ipu3: allow building it with COMPILE_TEST on non-x86 archs
Despite depending on ACPI, this driver builds fine on non-x86
archtecture with COMPILE_TEST, as it doesn't depend on
ACPI-specific functions/structs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:49:09 -04:00
Mauro Carvalho Chehab
6ba0b22d20 media: rc: allow build pnp-dependent drivers with COMPILE_TEST
The pnp header already provide enough stub to build those
drivers with COMPILE_TEST on non-x86 archs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:47:45 -04:00
Mauro Carvalho Chehab
516af1e2e4 media: sta2x11_vip: allow build with COMPILE_TEST
This driver doesn't use any weird API. So, allow building it
with COMPILE_TEST.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:14:56 -04:00
David S. Miller
b05f03b232 Merge branch 'sh_eth-complain-on-access-to-unimplemented-TSU-registers'
Sergei Shtylyov says:

====================
sh_eth: complain on access to unimplemented TSU registers

Here's a set of 2 patches against DaveM's 'net-next.git' repo. The 1st patch
routes TSU_POST<n> register accesses thru sh_eth_tsu_{read|write}() and the 2nd
added WARN_ON() unimplemented register to those functions. I'm going to deal with
TSU_ADR{H|L}<n> registers in a later series...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04 09:11:50 -04:00
Sergei Shtylyov
627a0d20fa sh_eth: WARN_ON() access to unimplemented TSU register
Commit 3365711df0 ("sh_eth: WARN on access to a register not implemented
in a particular chip") added  WARN_ON() to sh_eth_{read|write}() but not
to sh_eth_tsu_{read|write}(). Now that we've routed almost all TSU register
accesses  (except TSU_ADR{H|L}<n> -- which are special) thru the latter
pair of accessors, it makes sense to check for the unimplemented TSU
registers as well...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04 09:11:45 -04:00
Sergei Shtylyov
77cb065fde sh_eth: use TSU register accessors for TSU_POST<n>
There's no particularly good reason TSU_POST<n> registers get accessed
circumventing sh_eth_tsu_{read|write}() -- start using those, removing
(badly named) sh_eth_tsu_get_post_reg_offset(),  while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04 09:11:45 -04:00
Mauro Carvalho Chehab
258c524bda media: radio: allow building ISA drivers with COMPILE_TEST
Several radio devices only build on i386, because they depend
on ISA. Allow them to build on other archs by adding a
COMPILE_TEST check.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:08:16 -04:00
Mauro Carvalho Chehab
25d4affb0c media: flexcop-i2c: get rid of KERN_CONT
Coverity complains about werid stuff at the debug logic:

	CID 113542 (#1 of 1): Out-of-bounds access (ARRAY_VS_SINGLETON)10.
	callee_ptr_arith: Passing buf to function flexcop_i2c_write4
	which uses it as an array. This might corrupt or misinterpret
	adjacent memory locations.

Instead of directly addressing the issue there, let's rework at
the logic there.

On newer kernels, KERN_CONT does nothing, as the previous message
won't wait for a continuation. Also, both flexcop_i2c_read4() and
flexcop_i2c_write4(), called by it, will print stuff if (debug &4).

So, the way it is is too buggy.

There are two kinds of debug stuff there: deb_i2c() and a code hidden
under #ifdef DUMP_I2C_MESSAGES, with can't be selected without touching
the source code.

Also, if both debug & 0x4 and DUMP_I2C_MESSAGES, flexcop_i2c_request()
will emit two debug messages per call with different data,
with sounds messy.

Simplify it by getting rid of DUMP_I2C_MESSAGES and adding a new
flag to debug (0x40), and making the debug logic there more
consistent.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:01:40 -04:00
Mauro Carvalho Chehab
366b401001 media: davinci: don't override the error code
As warned by Coverity:
	CID 1415211 (#1 of 1): Unused value (UNUSED_VALUE)assigned_value:
	Assigning value -22 to ret here, but that stored value is
	overwritten before it can be used.

On all cases where the there's a goto 'unlock_out' or 'streamof',
ret was filled with a non-sero value. It toesn't make sense to override
such error code with a videobuf_streamoff() error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:59:37 -04:00
Colin Ian King
83e548bea4 EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
Trivial fix to spelling mistake in err string.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180504113804.17103-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-04 14:59:29 +02:00
Mauro Carvalho Chehab
fd901b6e81 media: em28xx: Don't use ops->resume if NULL
Changeset  be7fd3c3a8 ("media: em28xx: Hauppauge DualHD
second tuner functionality") introduced a potential NULL pointer
dereference, as pointed by Coverity:

CID 1434731 (#1 of 1): Dereference after null check (FORWARD_NULL)16. var_deref_op: Dereferencing null pointer ops->resume.

var_compare_op: Comparing ops->resume to null implies that ops->resume might be null.
1174                if (ops->resume)
1175                        ops->resume(dev);
1176                if (dev->dev_next)
1177                        ops->resume(dev->dev_next);

Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:59:02 -04:00
Mauro Carvalho Chehab
de6dddffec media: s5p-jpeg: don't return a value on a void function
Building this driver on arm64 gives this warning:
	drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:430:16: error: return expression in void function

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:58:22 -04:00
Mauro Carvalho Chehab
5ef76cb7c1 media: siano: be sure to not override devpath size
Right now, at siano driver, all places where devpath is
defined has sizeof(devpath) == 32. So, there's no practical
risc of going past devpath array anywhere.

Still, code changes might cause troubles. It also confuses
Coverity:
	CID 139059 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
	9. fixed_size_dest: You might overrun the 32-character
	   fixed-size string entry->devpath by copying devpath
	   without checking the length.
	10. parameter_as_source: Note: This defect has an
	    elevated risk because the source argument
	    is a parameter of the current function.

So, explicitly limit strcmp() and strcpy() to ensure that the
devpath size (32) will be respected.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:55:36 -04:00
Mauro Carvalho Chehab
e1b7f11b37 media: siano: get rid of __le32/__le16 cast warnings
Those are all false-positives that appear with smatch when building for
arm:

  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c💯27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c💯27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c💯27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c💯27: warning: cast to restricted __le16

Get rid of them by adding explicit forced casts.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:55:05 -04:00
Lorenzo Bianconi
c990affd5a mt76x2: fix avg_rssi estimation
Add leftover filter coefficients in IIR rssi estimation

Fixes: 7bc04215a6 ("mt76: add driver code for MT76x2e")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:40:20 +03:00
Colin Ian King
7e7939e80e ipw2200: fix spelling mistake: "functionalitis" -> "functionalities"
Trivial fix to spelling mistake in module parameter description text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:37:37 +03:00
Lorenzo Bianconi
8efb868566 mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate()
Remove unnecessary break statement in the default case of bw switch
block in mt76x2_mac_process_tx_rate routine

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:36:32 +03:00
Colin Ian King
070fc356e2 rtlwifi: fix spelling mistake: "dismatch" -> "mismatch"
Trivial fix to spelling mistake in RT_TRACE message text.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:36:04 +03:00
Stanislaw Gruszka
811a399151 rt2x00: check against flushing empty queue
We have check if queue is not empty when start flushing queues on
by mac80211 callback, but we also can start flushing queues by internal
driver calls. So move check into rt2x00queue_flush_queue() to assure
we do not flush empty queue anytime.

Additionally add warning if we start to kick empty queue as in such
situation we set wrong index in the HW queue, what can confuse the HW
and have various negative consequences.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:34:20 +03:00
Stanislaw Gruszka
9c87758cf0 rt2x00: call sta_add/remove directly in rt2800
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(),
we do not need generic version of those.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04 15:34:19 +03:00
Anders Roxell
02489a1216 drivers: omap2: Kconfig: make FB_OMAP2_DSS_INIT depend on OF
Commit 7378f11498 ("media: omap2: omapfb: allow building it with
COMPILE_TEST") broke compilation without CONFIG_OF selected.
  CC      drivers/video/fbdev/core/fbmem.o
drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c: In function ‘omapdss_update_prop’:
drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c:68:2: error: implicit declaration of function ‘of_update_property’; did you mean ‘of_get_property’? [-Werror=implicit-function-declaration]
  of_update_property(node, prop);
  ^~~~~~~~~~~~~~~~~~
  of_get_property
cc1: some warnings being treated as errors
scripts/Makefile.build:312: recipe for target 'drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.o' failed
make[7]: *** [drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.o] Error 1
scripts/Makefile.build:559: recipe for target 'drivers/video/fbdev/omap2/omapfb/dss' failed
make[6]: *** [drivers/video/fbdev/omap2/omapfb/dss] Error 2
make[6]: *** Waiting for unfinished jobs....

Add OF dependency in order to make all configurations work again.

of_update_property() has no inline stub, and that that could be added as
an alternative.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:27:04 -04:00
Sean Young
7bc8a0de69 media: rc: probe zilog transmitter when zilog receiver is found
Both Hauppauge WinTV 44981 (bt878) and the HVR 1110 (saa7134) have a Zilog
Z8F0811. The transmitter was not probed. Receive and transmit tested on
both cards.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:22:36 -04:00
Sean Young
f9d94a10da media: rc: imon decoder: support the stick
The iMON PAD controller has a analog stick, which can be switched to
keyboard mode (cursor keys) or work as a crappy mouse.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:22:09 -04:00
Sean Young
c00cb587a2 media: rc: only register protocol for rc device if enabled
The raw_register function exists to create input devices associated with
that IR protocol.

If the mce_kbd module is loaded, then every rc device will have mce_kbd
input devices, even if the protocol is not enabled. Change this to call
the register function to when the protocol is enabled.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:21:04 -04:00
Dmitry Osipenko
c9ac52175b drm/tegra: gr3d: Add IOMMU support
Attach GR3D to the displays IOMMU group in order to provide GR3D access
to BO's IOVA.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-04 14:20:09 +02:00
Dmitry Osipenko
5fda01b50d drm/tegra: gr2d: Add IOMMU support
Attach GR2D to the display IOMMU group in order to provide GR2D access
to BO's IOVA.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-04 14:19:54 +02:00
Dmitry Osipenko
6f75b16b26 drm/tegra: dc: Balance IOMMU group refcounting
Remove unneeded iommu_group_get() and add missing iommu_group_put(),
correcting IOMMU group refcount. This is a minor correction / cleanup that
doesn't really fix anything because Tegra's IOMMU driver are built-in and
hence groups refcounting can't hold IOMMU driver from unloading.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-04 14:19:14 +02:00
Laurent Pinchart
cbb7fa49c7 media: v4l: vsp1: Rename BRU to BRx
Some VSP instances have two blending units named BRU (Blend/ROP Unit)
and BRS (Blend/ROP Sub unit). The BRS is a smaller version of the BRU
with only two inputs, but otherwise offers similar features and offers
the same register interface. The BRU and BRS can be used exchangeably in
VSP pipelines (provided no more than two inputs are needed).

Due to historical reasons, the VSP1 driver implements support for both
the BRU and BRS through objects named vsp1_bru. The code uses the name
BRU to refer to either the BRU or the BRS, except in a few places where
noted explicitly. This creates confusion.

In an effort to avoid confusion, rename the vsp1_bru object and the
corresponding API to vsp1_brx, and use BRx to refer to blend unit
instances regardless of their type. The names BRU and BRS are retained
where reference to a particular blend unit type is needed, as well as in
hardware registers to stay close to the datasheet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:06:29 -04:00
Laurent Pinchart
dc3eaba4ee media: v4l: vsp1: Add BRx dynamic assignment debugging messages
Dynamic assignment of the BRU and BRS to pipelines is prone to
regressions, add messages to make debugging easier. Keep it as a
separate commit to ease removal of those messages once the code will
deem to be completely stable.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:05:29 -04:00
Laurent Pinchart
f81f9adc4e media: v4l: vsp1: Assign BRU and BRS to pipelines dynamically
The VSPDL variant drives two DU channels through two LIF and two
blenders, BRU and BRS. The DU channels thus share the five available
VSPDL inputs and expose them as five KMS planes.

The current implementation assigns the BRS to the second LIF and thus
artificially limits the number of planes for the second display channel
to two at most.

Lift this artificial limitation by assigning the BRU and BRS to the
display pipelines on demand based on the number of planes used by each
pipeline. When a display pipeline needs more than two inputs and the BRU
is already in use by the other pipeline, this requires reconfiguring the
other pipeline to free the BRU before processing, which can result in
frame drop on both pipelines.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:04:54 -04:00
Laurent Pinchart
1dd72ee923 media: v4l: vsp1: Generalize detection of entity removal from DRM pipeline
When disabling a DRM plane, the corresponding RPF is only marked as
removed from the pipeline in the atomic update handler, with the actual
removal happening when configuring the pipeline at atomic commit time.
This is required as the RPF has to be disabled in the hardware, which
can't be done from the atomic update handler.

The current implementation is RPF-specific. Make it independent of the
entity type by using the entity's pipe pointer to mark removal from the
pipeline. This will allow using the mechanism to remove BRU instances.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:03:26 -04:00
Laurent Pinchart
bc3c9c8802 media: v4l: vsp1: Add per-display list internal completion notification support
Display list completion is already reported to the frame end handler,
but that mechanism is global to all display lists. In order to implement
BRU and BRS reassignment in DRM pipelines we will need to commit a
display list and wait for its completion internally, without reporting
it to the DRM driver. Extend the display list API to support such an
internal use of the display list.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:02:51 -04:00
Laurent Pinchart
bbc56faf3c media: v4l: vsp1: Turn frame end completion status into a bitfield
We will soon need to return more than a boolean completion status from
the vsp1_dlm_irq_frame_end() IRQ handler. Turn the return value into a
bitfield to prepare for that. No functional change is introduced here.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:02:00 -04:00
Laurent Pinchart
5a4d566a5b media: v4l: vsp1: Move DRM pipeline output setup code to a function
In order to make the vsp1_du_setup_lif() easier to read, and for
symmetry with the DRM pipeline input setup, move the pipeline output
setup code to a separate function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:01:10 -04:00
Laurent Pinchart
b76b3ce55f media: v4l: vsp1: Replace manual DRM pipeline input setup in vsp1_du_setup_lif
The vsp1_du_setup_lif() function sets up the DRM pipeline input
manually. This duplicates the code from the
vsp1_du_pipeline_setup_inputs() function. Replace the manual
implementation by a call to the function.

As the pipeline has no enabled input in vsp1_du_setup_lif(), the
vsp1_du_pipeline_setup_inputs() function will not setup any RPF, and
will thus not setup formats on the BRU sink pads. This isn't a problem
as all inputs are disabled, and the BRU sink pads will be reconfigured
from the atomic commit handler when inputs will be enabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:00:35 -04:00
Laurent Pinchart
7ff667cfe3 media: v4l: vsp1: Setup BRU at atomic commit time
To implement fully dynamic plane assignment to pipelines, we need to
reassign the BRU and BRS to the DRM pipelines in the atomic commit
handler. In preparation for this setup factor out the BRU source pad
code and call it both at LIF setup and atomic commit time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:00:07 -04:00
Laurent Pinchart
02b902fcf6 media: v4l: vsp1: Move DRM atomic commit pipeline setup to separate function
The DRM pipeline setup code used at atomic commit time is similar to the
setup code used when enabling the pipeline. Move it to a separate
function in order to share it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:59:16 -04:00
Laurent Pinchart
c8c310c99e media: v4l: vsp1: Share duplicated DRM pipeline configuration code
Move the duplicated DRM pipeline configuration code to a function and
call it from vsp1_du_setup_lif() and vsp1_du_atomic_flush().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:57:47 -04:00
Laurent Pinchart
d4fedb0b91 media: v4l: vsp1: Use vsp1_entity.pipe to check if entity belongs to a pipeline
The DRM pipeline handling code uses the entity's pipe list head to check
whether the entity is already included in a pipeline. This method is a
bit fragile in the sense that it uses list_empty() on a list_head that
is a list member. Replace it by a simpler check for the entity pipe
pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:57:06 -04:00
Laurent Pinchart
1ccbb32cb8 media: v4l: vsp1: Store pipeline pointer in vsp1_entity
Various types of objects subclassing vsp1_entity currently store a
pointer to the pipeline. Move the pointer to vsp1_entity to simplify the
code and avoid storing the pipeline in more entity subclasses later.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:55:08 -04:00
Laurent Pinchart
7a7810878e media: v4l: vsp1: Remove unused field from vsp1_drm_pipeline structure
The vsp1_drm_pipeline enabled field is set but never used. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:54:00 -04:00
Chris Wilson
43c8c44105 drm/i915: Remove assertion of active_rings must be non-empty if active_requests
"An outstanding request must still be on an active ring somewhere" is
only true if we haven't just been interrupted by the shrinker in the
middle of allocating the request itself. (At the start of
i915_request_alloc() we pin the context and prepare the GT for activity,
marking it as active, and then try to allocate the request. If this
allocation invokes the shrinker, we try to reclaim some space by calling
i915_retire_requests() which may then be confused by the pre-reservation
of active_requests.)

<3>[  125.472695] i915_retire_requests:1429 GEM_BUG_ON(list_empty(&i915->gt.active_rings))
<2>[  125.472792] kernel BUG at drivers/gpu/drm/i915/i915_request.c:1429!
<4>[  125.472822] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
<4>[  125.498764] Modules linked in: snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel btusb btrtl btbcm btintel cdc_ether snd_hda_codec_realtek bluetooth i915 snd_hda_codec_generic usbnet r8152 mii ecdh_generic lpc_ich mei_me snd_hda_intel snd_hda_codec mei snd_hwdep snd_hda_core snd_pcm prime_numbers
<4>[  125.498923] CPU: 0 PID: 1115 Comm: gem_exec_create Tainted: G     U            4.17.0-rc3-gc49cbe0d1eb8-kasan_32+ #1
<4>[  125.498955] Hardware name: GOOGLE Peppy/Peppy, BIOS MrChromebox 02/04/2018
<4>[  125.499074] RIP: 0010:i915_retire_requests+0x3f2/0x590 [i915]
<4>[  125.499095] RSP: 0018:ffff88004e5dec40 EFLAGS: 00010282
<4>[  125.499117] RAX: 0000000000000010 RBX: ffff8800458f0000 RCX: 0000000000000000
<4>[  125.499140] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff880060c2f6f0
<4>[  125.499164] RBP: ffff88004e5dee30 R08: ffffed000c185ee6 R09: ffffed000c185ee6
<4>[  125.499187] R10: 0000000000000001 R11: ffffed000c185ee5 R12: ffff8800553da160
<4>[  125.499210] R13: dffffc0000000000 R14: 0000000000000000 R15: ffff8800458faed0
<4>[  125.499235] FS:  00007fe18f052980(0000) GS:ffff880065400000(0000) knlGS:0000000000000000
<4>[  125.499262] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  125.499282] CR2: 00007f01df11efb8 CR3: 00000000518d4001 CR4: 00000000000606f0
<4>[  125.499304] Call Trace:
<4>[  125.499417]  i915_gem_shrink+0x576/0xb50 [i915]
<4>[  125.499532]  ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915]
<4>[  125.499561]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.499671]  ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915]
<4>[  125.499782]  ? i915_gem_shrinker_scan+0xc4/0x320 [i915]
<4>[  125.499889]  i915_gem_shrinker_scan+0xc4/0x320 [i915]
<4>[  125.499997]  ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915]
<4>[  125.500021]  ? do_raw_spin_unlock+0x4f/0x240
<4>[  125.500042]  ? _raw_spin_unlock+0x29/0x40
<4>[  125.500149]  ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915]
<4>[  125.500177]  shrink_slab.part.18+0x23e/0x8f0
<4>[  125.500202]  ? unregister_shrinker+0x1f0/0x1f0
<4>[  125.500226]  ? mem_cgroup_iter+0x379/0xcc0
<4>[  125.500249]  shrink_node+0xa7e/0x1180
<4>[  125.500276]  ? shrink_node_memcg+0x11f0/0x11f0
<4>[  125.500297]  ? __delayacct_freepages_start+0x38/0x80
<4>[  125.500319]  ? __is_insn_slot_addr+0xe3/0x1a0
<4>[  125.500342]  ? recalibrate_cpu_khz+0x10/0x10
<4>[  125.500361]  ? ktime_get+0xb2/0x140
<4>[  125.500382]  do_try_to_free_pages+0x2d3/0xe40
<4>[  125.500407]  ? allow_direct_reclaim.part.23+0x1e0/0x1e0
<4>[  125.500429]  ? shrink_node+0x1180/0x1180
<4>[  125.500450]  ? __read_once_size_nocheck.constprop.4+0x10/0x10
<4>[  125.500476]  try_to_free_pages+0x1af/0x560
<4>[  125.500497]  ? do_try_to_free_pages+0xe40/0xe40
<4>[  125.500525]  __alloc_pages_nodemask+0xadc/0x2130
<4>[  125.500553]  ? gfp_pfmemalloc_allowed+0x150/0x150
<4>[  125.500654]  ? i915_gem_do_execbuffer+0x219d/0x32e0 [i915]
<4>[  125.500678]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.500701]  ? __debug_object_init+0x322/0xd90
<4>[  125.500722]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.500827]  ? i915_gem_do_execbuffer+0xdc2/0x32e0 [i915]
<4>[  125.500942]  ? i915_request_alloc+0x5b5/0x13f0 [i915]
<4>[  125.500964]  ? page_frag_free+0x170/0x170
<4>[  125.500984]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.501008]  new_slab+0x21d/0x5c0
<4>[  125.501029]  ___slab_alloc.constprop.35+0x322/0x3e0
<4>[  125.501052]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501074]  ? __ww_mutex_lock.constprop.3+0x1104/0x2cf0
<4>[  125.501097]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4>[  125.501120]  ? fs_reclaim_acquire+0x10/0x10
<4>[  125.501138]  ? lock_acquire+0x138/0x3c0
<4>[  125.501156]  ? lock_acquire+0x3c0/0x3c0
<4>[  125.501176]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501198]  ? __slab_alloc.isra.27.constprop.34+0x3d/0x70
<4>[  125.501219]  __slab_alloc.isra.27.constprop.34+0x3d/0x70
<4>[  125.501243]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501265]  __kmalloc_track_caller+0x313/0x350
<4>[  125.501287]  krealloc+0x62/0xb0
<4>[  125.501305]  reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501411]  i915_gem_do_execbuffer+0x2040/0x32e0 [i915]
<4>[  125.501522]  ? eb_relocate_slow+0xad0/0xad0 [i915]
<4>[  125.501544]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.501646]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.501755]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.501779]  ? drm_dev_get+0x20/0x20
<4>[  125.501803]  ? __might_fault+0xea/0x1a0
<4>[  125.501902]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.502012]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502116]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502218]  i915_gem_execbuffer2_ioctl+0x3c5/0x770 [i915]
<4>[  125.502243]  ? drm_dev_enter+0xe0/0xe0
<4>[  125.502260]  ? lock_acquire+0x138/0x3c0
<4>[  125.502362]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502470]  ? i915_gem_object_create.part.28+0x570/0x570 [i915]
<4>[  125.502575]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502680]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502702]  drm_ioctl_kernel+0x151/0x200
<4>[  125.502721]  ? drm_ioctl_permit+0x2a0/0x2a0
<4>[  125.502746]  drm_ioctl+0x63a/0x920
<4>[  125.502844]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502868]  ? drm_getstats+0x20/0x20
<4>[  125.502886]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.502919]  do_vfs_ioctl+0x173/0xe90
<4>[  125.502936]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.502957]  ? ioctl_preallocate+0x170/0x170
<4>[  125.502978]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.503002]  ? retint_kernel+0x2d/0x2d
<4>[  125.503024]  ksys_ioctl+0x35/0x60
<4>[  125.503043]  __x64_sys_ioctl+0x6a/0xb0
<4>[  125.503061]  do_syscall_64+0x97/0x400
<4>[  125.503081]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  125.503101] RIP: 0033:0x7fe18e4f65d7
<4>[  125.503116] RSP: 002b:00007ffe2ffc06a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
<4>[  125.503145] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe18e4f65d7
<4>[  125.503168] RDX: 00007ffe2ffc07f0 RSI: 0000000040406469 RDI: 0000000000000003
<4>[  125.503191] RBP: 00007ffe2ffc07f0 R08: 0000000000000004 R09: 00007ffe2ffcf080
<4>[  125.503215] R10: 000000000002c7de R11: 0000000000000246 R12: 0000000040406469
<4>[  125.503238] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
<4>[  125.503268] Code: e8 18 a0 c9 da 48 8b 35 25 3a 47 00 49 c7 c0 a0 3b 88 c0 b9 95 05 00 00 48 c7 c2 e0 49 88 c0 48 c7 c7 8d 3b 5d c0 e8 ee 7e db da <0f> 0b 48 89 ef e8 a4 26 f5 da e9 51 fe ff ff e8 8a 26 f5 da e9
<1>[  125.503548] RIP: i915_retire_requests+0x3f2/0x590 [i915] RSP: ffff88004e5dec40

Fixes: 643b450a59 ("drm/i915: Only track live rings for retiring")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504101147.26286-1-chris@chris-wilson.co.uk
2018-05-04 12:41:23 +01:00
Honghui Zhang
101c92dc80 PCI: mediatek: Set up vendor ID and class type for MT7622
MT7622's hardware default value of vendor ID and class type is not correct,
fix that by setup the correct values before linkup with Endpoint.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2018-05-04 12:25:45 +01:00
Laurent Pinchart
9fd099b183 media: v4l: vsp1: Don't start/stop media pipeline for DRM
The DRM support code manages a pipeline of VSP entities, each backed by
a media entity. When starting or stopping the pipeline, it starts and
stops the media pipeline through the media API in order to store the
pipeline pointer in every entity.

The driver doesn't use the pipe pointer in media entities, neither does
it rely on the other effects of the media_pipeline_start() and
media_pipeline_stop() functions. Furthermore, as the media links for the
DRM pipeline are never set up correctly, and as the pipeline can be
modified dynamically when enabling or disabling planes, the current
implementation is not correct. Remove the incorrect and unneeded code.

While at it remove the outdated comment that states that entities are
not started when the LIF is setup, as they now are.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 07:03:32 -04:00
Hugo Grostabussiat
15b4c54ea4 media: usbtv: Use the constant for supported standards
Use the USBTV_TV_STD define instead of repeating ourselves.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:53:11 -04:00
Hugo Grostabussiat
bed6d27bcf media: usbtv: Enforce standard for color decoding
Depending on the chosen standard, configure the decoder to use the
appropriate color encoding standard (PAL-like, NTSC-like or SECAM).

Until now, the decoder was not configured for a specific color standard,
making it autodetect the color encoding.

While this may sound fine, it potentially causes the wrong image tuning
parameters to be applied (e.g. tuning parameters for NTSC are applied to
a PAL source), and may confuse users about what the actual standard is
in use.

This commit explicitly configures the color standard the decoder will
use, making it visually obvious if a wrong standard was chosen.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:52:19 -04:00
Hugo Grostabussiat
a8b48e224c media: usbtv: Keep norm parameter specific
The user-supplied norm value gets overwritten by the generic .norm
member from the norm_params. That way, we lose the specific norm the
user may want to set.

For instance, if the user specifies V4L2_STD_PAL_60, the value actually
used will be V4L2_STD_525_60, which in the end will be as if the user
had specified V4L2_STD_NTSC, since this is always the first bitfield we
match the norm value against before configuring the hardware.

The norm_params array is only there to match a norm with an output
resolution. The norm value itself should not be changed.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:50:49 -04:00
Hugo Grostabussiat
8c42d2763c media: usbtv: Use V4L2 defines to select capture resolution
Make use of the V4L2_STD_525_60 and V4L2_STD_625_50 defines to
determine the vertical resolution to use when capturing.

V4L2_STD_525_60 (resp. V4L2_STD_625_50) is the set of standards using
525 (resp. 625) lines per frame, independently of the color encoding.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:49:26 -04:00
Hugo Grostabussiat
c41e20d9cb media: usbtv: Add SECAM support
Add support for the SECAM norm, using the "AVSECAM" decoder configuration
sequence found in Windows driver's .INF file.

For reference, the "AVSECAM" sequence in the .INF file is:
0x04,0x73,0xDC,0x72,0xA2,0x90,0x35,0x01,0x30,0x04,0x08,0x2D,0x28,0x08,
0x02,0x69,0x16,0x35,0x21,0x16,0x36

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:48:49 -04:00
Hugo Grostabussiat
5c909be048 media: usbtv: Use same decoder sequence as Windows driver
Re-format the register {address, value} pairs so they follow the same
order as the decoder configuration sequences in the Windows driver's .INF
file.

For instance, for PAL, the "AVPAL" sequence in the .INF file is:
0x04,0x68,0xD3,0x72,0xA2,0xB0,0x15,0x01,0x2C,0x10,0x20,0x2e,0x08,0x02,
0x02,0x59,0x16,0x35,0x17,0x16,0x36

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:48:18 -04:00