Commit graph

766,493 commits

Author SHA1 Message Date
Heiner Kallweit
ff1d733155 r8169: improve PCI config space access
Some chips have a non-zero function id, however instead of hardcoding
the id's (CSIAR_FUNC_NIC and CSIAR_FUNC_NIC2) we can get them
dynamically via PCI_FUNC(pci_dev->devfn). This way we can get rid
of the csi_ops.

In general csi is just a fallback mechanism for PCI config space
access in case no native access is supported. Therefore let's
try native access first.

I checked with Realtek regarding the functionality of config space
byte 0x070f and according to them it controls the L0s/L1
entrance latency.
Currently ASPM is disabled in general and therefore this value
isn't used. However we may introduce a whitelist for chips
where ASPM is known to work, therefore let's keep this code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
eda40b8cbe r8169: drop rtl_generic_op
Only two places are left where rtl_generic_op() is used, so we can
inline it and simplify the code a little.
This change also avoids the overhead of unlocking/locking in case
the respective operation isn't set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
b2d43e6ecf r8169: replace longer if statements with switch statements
Some longer if statements can be simplified by using switch
statements instead.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
2a71883c4f r8169: simplify code by using ranges in switch clauses
Several switch statements can be significantly simplified by using
case ranges.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
4f447d2969 r8169: drop member pll_power_ops from struct rtl8169_private
After merging r810x_pll_power_down/up and r8168_pll_power_down/up we
don't need member pll_power_ops any longer and can drop it, thus
simplifying the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
73570bf19f r8169: merge r810x_pll_power_down/up into r8168_pll_power_down/up
r810x_pll_power_down/up and r8168_pll_power_down/up have a lot in common,
so we can simplify the code by merging the former into the latter.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
40242e232e r8169: remove 810x_phy_power_up/down
The functionality of 810x_phy_power_up/down is covered by the default
clause in 8168_phy_power_up/down. Therefore we don't need these
functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Heiner Kallweit
6851d025e5 r8169: remove unneeded check in r8168_pll_power_down
RTL_GIGA_MAC_VER_23/24 are configured by rtl_hw_start_8168cp_2()
and rtl_hw_start_8168cp_3() respectively which both apply
CPCMD_QUIRK_MASK, thus clearing bit ASF.

Bit ASF isn't set at any other place in the driver, therefore this
check can be removed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:23:49 -04:00
Ville Syrjälä
ec66723197 drm/rect: Fix drm_rect_rotation_inv() docs
An overeager sed has corrupted the drm_rect_rotation_inv()
documentation. Fix it up.

Looks like it wasn't entirely correct before the sed fail
either. We were missing _rect_ from the function names, which
also explains why the sed hit these by accident.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426141631.15798-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-02 23:02:22 +03:00
Helge Deller
8d73b18079 parisc: Fix section mismatches
Fix three section mismatches:
1) Section mismatch in reference from the function ioread8() to the
   function .init.text:pcibios_init_bridge()
2) Section mismatch in reference from the function free_initmem() to the
   function .init.text:map_pages()
3) Section mismatch in reference from the function ccio_ioc_init() to
   the function .init.text:count_parisc_driver()

Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-02 21:47:35 +02:00
Helge Deller
b819439fea parisc: drivers.c: Fix section mismatches
Fix two section mismatches in drivers.c:
1) Section mismatch in reference from the function alloc_tree_node() to
   the function .init.text:create_tree_node().
2) Section mismatch in reference from the function walk_native_bus() to
   the function .init.text:alloc_pa_dev().

Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-02 21:47:27 +02:00
Ilya Dryomov
d7760d638b iov_iter: fix memory leak in pipe_get_pages_alloc()
Make n signed to avoid leaking the pages array if __pipe_get_pages()
fails to allocate any pages.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-02 15:43:19 -04:00
Ilya Dryomov
e76b631239 iov_iter: fix return type of __pipe_get_pages()
It returns -EFAULT and happens to be a helper for pipe_get_pages()
whose return type is ssize_t.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-02 15:43:15 -04:00
Alexei Starovoitov
0f58e58e28 Merge branch 'x86-bpf-jit-fixes'
Daniel Borkmann says:

====================
Fix two memory leaks in x86 JIT. For details, please see
individual patches in this series. Thanks!
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-02 12:35:48 -07:00
Daniel Borkmann
39f56ca945 bpf, x64: fix memleak when not converging on calls
The JIT logic in jit_subprogs() is as follows: for all subprogs we
allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here),
and pass it to bpf_int_jit_compile(). If a failure occurred during
JIT and prog->jited is not set, then we bail out from attempting to
JIT the whole program, and punt to the interpreter instead. In case
JITing went successful, we fixup BPF call offsets and do another
pass to bpf_int_jit_compile() (extra_pass is true at that point) to
complete JITing calls. Given that requires to pass JIT context around
addrs and jit_data from x86 JIT are freed in the extra_pass in
bpf_int_jit_compile() when calls are involved (if not, they can
be freed immediately). However, if in the original pass, the JIT
image didn't converge then we leak addrs and jit_data since image
itself is NULL, the prog->is_func is set and extra_pass is false
in that case, meaning both will become unreachable and are never
cleaned up, therefore we need to free as well on !image. Only x64
JIT is affected.

Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-02 12:35:47 -07:00
Daniel Borkmann
3aab8884c9 bpf, x64: fix memleak when not converging after image
While reviewing x64 JIT code, I noticed that we leak the prior allocated
JIT image in the case where proglen != oldproglen during the JIT passes.
Prior to the commit e0ee9c1215 ("x86: bpf_jit: fix two bugs in eBPF JIT
compiler") we would just break out of the loop, and using the image as the
JITed prog since it could only shrink in size anyway. After e0ee9c1215,
we would bail out to out_addrs label where we free addrs and jit_data but
not the image coming from bpf_jit_binary_alloc().

Fixes: e0ee9c1215 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-02 12:35:47 -07:00
Sean Paul
49ceda9de2 drm/bridge: vga-dac: Fix edid memory leak
edid should be freed once it's finished being used.

Fixes: 56fe8b6f49 ("drm/bridge: Add RGB to VGA bridge support")
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org
2018-05-02 15:09:21 -04:00
Christoph Hellwig
7a074e96de aio: implement io_pgetevents
This is the io_getevents equivalent of ppoll/pselect and allows to
properly mix signals and aio completions (especially with IOCB_CMD_POLL)
and atomically executes the following sequence:

	sigset_t origmask;

	pthread_sigmask(SIG_SETMASK, &sigmask, &origmask);
	ret = io_getevents(ctx, min_nr, nr, events, timeout);
	pthread_sigmask(SIG_SETMASK, &origmask, NULL);

Note that unlike many other signal related calls we do not pass a sigmask
size, as that would get us to 7 arguments, which aren't easily supported
by the syscall infrastructure.  It seems a lot less painful to just add a
new syscall variant in the unlikely case we're going to increase the
sigset size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:57:24 +02:00
Christoph Hellwig
a3c0d439e4 aio: implement IOCB_CMD_FSYNC and IOCB_CMD_FDSYNC
Simple workqueue offload for now, but prepared for adding a real aio_fsync
method if the need arises.  Based on an earlier patch from Dave Chinner.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:57:24 +02:00
Christoph Hellwig
54843f875f aio: refactor read/write iocb setup
Don't reference the kiocb structure from the common aio code, and move
any use of it into helper specific to the read/write path.  This is in
preparation for aio_poll support that wants to use the space for different
fields.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:57:21 +02:00
Christoph Hellwig
92ce472856 aio: remove the extra get_file/fput pair in io_submit_one
If we release the lockdep write protection token before calling into
->write_iter and thus never access the file pointer after an -EIOCBQUEUED
return from ->write_iter or ->read_iter we don't need this extra
reference.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-02 19:56:30 +02:00
Christoph Hellwig
75321b50a3 aio: sanitize ki_list handling
Instead of handcoded non-null checks always initialize ki_list to an
empty list and use list_empty / list_empty_careful on it.  While we're
at it also error out on a double call to kiocb_set_cancel_fn instead
of ignoring it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:52:59 +02:00
Christoph Hellwig
c213dc826c aio: remove an outdated BUG_ON and comment in aio_complete
These days we don't treat sync iocbs special in the aio completion code as
they never use it.  Remove the old comment and BUG_ON given that the
current definition of is_sync_kiocb makes it impossible to hit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:52:38 +02:00
Christoph Hellwig
01a658e1e9 aio: don't print the page size at boot time
The page size is in no way related to the aio code, and printing it in
the (debug) dmesg at every boot serves no purpose.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-02 19:48:36 +02:00
Ingo Molnar
eaeb1f4d89 perf/core improvements and fixes:
perf stat: (Jiri Olsa)
 
 - Display time in precision based on std deviation
 
 - Add --table option to display time of each run
 
 - Display length strings of each run for --table option
 
 perf buildid-cache: (Ravi Bangoria)
 
 - Add --list and --purge-all options
 
 perf test: (Hendrik Brueckner)
 
 - Let 'perf test list' display subtests
 
 Core libraries:
 
 - Remove the splitting of maps into MAP__FUNCTION and MAP__VARIABLE.
   It isn't needed, adds complexity, so remove this split in a very granular
   fashion using better ways of detecting if a map is executable, using map->prot,
   etc. More is needed to further untangle map aspects from DSO ones and
   also to have arch specific stuff better isolated.  (Arnaldo Carvalho de Melo)
 
 - Fix spelling mistake: "builid" -> "buildid" in a jitdump error
   message (Colin Ian King)
 
 Build system: (Jiri Olsa)
 
 - Add support to check 2 independent files in check-headers.sh
 
 Documentation: (Takashi Iwai)
 
 - Support for asciidoctor, since 'asciidoc' wasn't so far ported to
   python3 and distros are ditching python2
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlrpzUMACgkQ1lAW81NS
 qkA0rhAAtIOoKqapKp0vuSMQlGYvTqleUrY9PJg4JBzgcHJUJqsS3mVinSwpNEfh
 RpFV2Ttrwe5RmqE8IdDtHn1C9OvFLMtLMA1qu1Os1yaJbOTEjzKfWOG+thNeN3rM
 ogcUNasGygyR1ONdya9RiRG1E6Bn1Z01vNc8EXJYoLuGTswcPVmM8Nx/hLChM7qh
 qISBR3l04gl4H66NSd1fQ4nNDcPMNxWrBlKr7SWO+tCw342KqnEylg9u77sDs8U0
 nBtYZkemBWzRrKoVSQ68DJ0KYrkMlOIO/86f0gwC+8Jlv0d7iFFX/rXOcR5tXHmT
 lUvRA74njZCReiUGwOJh9evzZ16NvIfYtAbQgUq2oR6KAEnN/5gHIc1XkCmzE1G4
 zXC55WsWbN1nfbQk0/58Cnn+ZaMyBt2VnuAAxIeJx7pH+SYTdjohFsRkumLEoZlh
 +nHZ6/kf29dbxDtcH/PksoMRlDV3yJi2lnCwAid2tG4irT27ilB04UpL/xU9EED7
 ZcHbBf3Y2vEXUGb/5GACdMy8H3L0d1GnRhv9pih8swCkhGRbiAYnX+ri8JtwbNf8
 lmzUdt9GIY9FKtQOedoKIa2bvVQ0juPr4M3G7QgJn3iK/f7T0F9xMMWWR5gO6xai
 h94p+7uVGuzD+zIQU5xeb/QZyUq0XU9IGZZ447nOk7mh7jXNcrg=
 =n34x
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.18-20180502' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

perf stat: (Jiri Olsa)

- Display time in precision based on std deviation

- Add --table option to display time of each run

- Display length strings of each run for --table option

perf buildid-cache: (Ravi Bangoria)

- Add --list and --purge-all options

perf test: (Hendrik Brueckner)

- Let 'perf test list' display subtests

Core libraries:

- Remove the splitting of maps into MAP__FUNCTION and MAP__VARIABLE.
  It isn't needed, adds complexity, so remove this split in a very granular
  fashion using better ways of detecting if a map is executable, using map->prot,
  etc. More is needed to further untangle map aspects from DSO ones and
  also to have arch specific stuff better isolated.  (Arnaldo Carvalho de Melo)

- Fix spelling mistake: "builid" -> "buildid" in a jitdump error
  message (Colin Ian King)

Build system: (Jiri Olsa)

- Add support to check 2 independent files in check-headers.sh

Documentation: (Takashi Iwai)

- Support for asciidoctor, since 'asciidoc' wasn't so far ported to
  python3 and distros are ditching python2

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-02 19:36:19 +02:00
David S. Miller
77ec3a0e2d Merge branch 'net-smc-small-features'
Ursula Braun says:

====================
net/smc: small features 2018/04/30

here are 4 smc patches for net-next covering small new features
in different areas:
   * link health check
   * diagnostics for IPv6 smc sockets
   * ioctl
   * improvement for vlan determination

v2 changes:
   * better title
   * patch 2 - remove compile problem for disabled CONFIG_IPV6
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:29:13 -04:00
Ursula Braun
cb9d43f677 net/smc: determine vlan_id of stacked net_device
An SMC link group is bound to a specific vlan_id. Its link uses
the RoCE-GIDs established for the specific vlan_id. This patch makes
sure the appropriate vlan_id is determined for stacked scenarios like
for instance a master bonding device with vlan devices enslaved.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:29:12 -04:00
Ursula Braun
9b67e26f93 net/smc: handle ioctls SIOCINQ, SIOCOUTQ, and SIOCOUTQNSD
SIOCINQ returns the amount of unread data in the RMB.
SIOCOUTQ returns the amount of unsent or unacked sent data in the send
buffer.
SIOCOUTQNSD returns the amount of data prepared for sending, but
not yet sent.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:29:12 -04:00
Karsten Graul
ed75986f4a net/smc: ipv6 support for smc_diag.c
Update smc_diag.c to support ipv6 addresses on the diagnosis interface.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:29:12 -04:00
Karsten Graul
877ae5be42 net/smc: periodic testlink support
Add periodic LLC testlink support to ensure the link is still active.
The interval time is initialized using the value of
sysctl_tcp_keepalive_time.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:29:12 -04:00
Ursula Braun
784813aed6 net/smc: restrict non-blocking connect finish
The smc_poll code tries to finish connect() if the socket is in
state SMC_INIT and polling of the internal CLC-socket returns with
EPOLLOUT. This makes sense for a select/poll call following a connect
call, but not without preceding connect().
With this patch smc_poll starts connect logic only, if the CLC-socket
is no longer in its initial state TCP_CLOSE.

In addition, a poll error on the internal CLC-socket is always
propagated to the SMC socket.

With this patch the code path mentioned by syzbot
https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396
is no longer possible.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:27:19 -04:00
Ingo Molnar
af3e0fcf78 8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
Use disable_irq_nosync() instead of disable_irq() as this might be
called in atomic context with netpoll.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:22:06 -04:00
Jens Axboe
3831761eb8 nvme: only reconfigure discard if necessary
Currently nvme reconfigures discard for every disk revalidation. This
is problematic because any O_WRONLY or O_RDWR open will trigger a
partition scan through udev/systemd, and we will reconfigure discard.
This blows away any user settings, like discard_max_bytes.

Only re-configure the user settable settings if we need to.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
[removed redundant queue flag setting]
Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-02 11:16:58 -06:00
David S. Miller
e90c1a1090 Merge branch 'mlxsw-Reject-unsupported-FIB-configurations'
Ido Schimmel says:

====================
mlxsw: Reject unsupported FIB configurations

Recently it became possible for listeners of the FIB notification chain
to veto operations such as addition of routes and rules.

Adjust the mlxsw driver to take advantage of it and return an error for
unsupported FIB rules and for routes configured after the abort
mechanism was triggered (due to exceeded resources for example).

v2:
* Change error code in first patch to -EOPNOTSUPP (David Ahern).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:15:18 -04:00
Ido Schimmel
50d10711cf mlxsw: spectrum_router: Return an error for routes added after abort
We currently do not perform accounting in the driver and thus can't
reject routes before resources are exceeded.

However, in order to make users aware of the fact that routes are no
longer offloaded we can return an error for routes configured after the
abort mechanism was triggered.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:15:17 -04:00
Ido Schimmel
6290182b2b mlxsw: spectrum_router: Return an error for non-default FIB rules
Since commit 9776d32537 ("net: Move call_fib_rule_notifiers up in
fib_nl_newrule") it is possible to forbid the installation of
unsupported FIB rules.

Have mlxsw return an error for non-default FIB rules in addition to the
existing extack message.

Example:
# ip rule add from 198.51.100.1 table 10
Error: mlxsw_spectrum: FIB rules not supported.

Note that offload is only aborted when non-default FIB rules are already
installed and merely replayed during module initialization.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:15:17 -04:00
Linus Walleij
5745067177 drm/pl111: Enable device-specific assigned memory
The Versatile Express has 8 MB of dedicated video RAM (VRAM)
on the motherboard, which is what we should be using for the
PL111 if available. On this platform, the memory backplane
is constructed so that only this memory will work properly
with the CLCD on the motherboard, using any other memory
area just gives random snow on the display.

The CA9 Versatile Express also has a PL111 instance on its
core tile that can address all memory, and this does not
have the restriction.

The memory is assigned to the device using the memory-region
device tree property and a "shared-dma-pool" reserved
memory pool like this:

reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        vram: vram@48000000 {
                compatible = "shared-dma-pool";
                reg = <0x48000000 0x00800000>;
                no-map;
        };
};

clcd@1f000 {
        compatible = "arm,pl111", "arm,primecell";
	(...)
        memory-region = <&vram>;
}·;

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-2-linus.walleij@linaro.org
2018-05-02 19:13:42 +02:00
Linus Walleij
ca454bd42d drm/pl111: Support the Versatile Express
The Versatile Express uses a special configuration controller
deeply embedded in the system motherboard FPGA to multiplex the
two to three (!) display controller instances out to the single
SiI9022 bridge.

Set up an extra file with the logic to probe to the FPGA mux
register on the system controller bus, then parse the device
tree to see if there is a CLCD or HDLCD instance on the core
tile (also known as the daughterboard) by looking in the
root of the device tree for compatible nodes.

- If there is a HDLCD on the core tile, and there is a driver
  for it, we exit probe and deactivate the motherboard CLCD.
  We do not touch the DVI mux in this case, to make sure we
  don't break HDLCD.

- If there is a CLCD on both the motherboard and the core tile
  (only the CA9 has this) the core tile CLCD takes precedence
  and get muxed to the DVI connector.

- Only if there is no working graphics on the core tile, the
  motherboard CLCD is probed and muxed to the DVI connector.

Core tile graphics should always take precedence as it can
address all memory and is also faster, however the motherboard
CLCD is good to have around for diagnostics and testing.

It is possible to test the motherboard CLCD by setting the
status = "disabled" property on the core tile CLCD or
HDLCD.

Scale down the Versatile Express to 16BPP so we can support a
1024x768 display despite the bus bandwidth restrictions on this
platform. (The motherboard CLCD supports slightly lower
resolution.)

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-1-linus.walleij@linaro.org
2018-05-02 19:13:28 +02:00
Krzysztof Kozlowski
0ca0557e37 pinctrl: samsung: Remove support for Exynos5440
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-05-02 19:08:55 +02:00
Ganesh Goudar
794451c1b5 cxgb4: add new T5 device id's
Add device id's 0x5019, 0x501a and 0x501b for T5
cards.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 13:03:37 -04:00
Krzysztof Kozlowski
c5deb59808 ARM: exynos: Remove support for Exynos5440
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-02 18:54:49 +02:00
Krzysztof Kozlowski
8c83315da1 ARM: dts: exynos: Remove Exynos5440
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting
server platforms but it did not make it to the market really.  There are
no development boards with it and probably there are no real products
neither.  The development for Exynos5440 ended in 2013 and since then
the platform is in maintenance mode.

Remove all Device Tree sources for Exynos5440, as first step of removal
of the platform to simplify the code and drivers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Rob Herring <robh@kernel.org>
2018-05-02 18:46:01 +02:00
Chris Wilson
0d4b78b3d2 drm/i915/guc: Assert we have the doorbell before setting it up
As our early doorbell is split between early allocation and a late setup
after we have a channel to the GuC, it may happen due to a lapse of
programmer judgement that we try to setup an invalid doorbell. Make use
of our has_doorbell() function to check the doorbell does exist for the
client before we try and tell the guc about it. In doing so, we prevent
the compiler from warning about the otherwise unused function in some
configurations.

Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501075203.12458-1-chris@chris-wilson.co.uk
2018-05-02 17:33:32 +01:00
Darrick J. Wong
021ba8e98f xfs: cap the length of deduplication requests
Since deduplication potentially has to read in all the pages in both
files in order to compare the contents, cap the deduplication request
length at MAX_RW_COUNT/2 (roughly 1GB) so that we have /some/ upper bound
on the request length and can't just lock up the kernel forever.  Found
by running generic/304 after commit 1ddae54555b62 ("common/rc: add
missing 'local' keywords").

Reported-by: matorola@gmail.com
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2018-05-02 09:21:33 -07:00
Rasmus Villemoes
9fc347678d modpost: delete stale comment
Commit 7840fea200 ("kbuild: Fix computing srcversion for modules")
fixed the comment above parse_source_files to refer to the new source_
line, but left this one behind that could still give the impression that
drivers/net/dummy.c appears in the deps_ variable.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-03 01:17:44 +09:00
Quentin Monnet
6f96674dbd bpf: relax constraints on formatting for eBPF helper documentation
The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):

    /*
     ...
     *.int bpf_helper(list of arguments)
     *.>    Description
     *.>    >       Start of description
     *.>    >       Another line of description
     *.>    >       And yet another line of description
     *.>    Return
     *.>    >       0 on success, or a negative error in case of failure
     ...
     */

This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.

Concretely, something like the following would now be supported:

    /*
     ...
     *int bpf_helper(list of arguments)
     *......Description
     *.>    >       Start of description...
     *>     >       Another line of description
     *..............And yet another line of description
     *>     Return
     *.>    ........0 on success, or a negative error in case of failure
     ...
     */

While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.

v2: Remove unnecessary caret when a regex is used with match().

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-02 17:46:50 +02:00
Matthias Kaehlcke
46e2068081 drm/i915: Disable some extra clang warnings
Commit 39bf4de89f ("drm/i915: Add -Wall -Wextra to our build, set
warnings to full") enabled extra warnings for i915 to spot possible
bugs in new code, and then disabled a subset of these warnings to keep
the current code building without warnings (with gcc). Enabling the
extra warnings also enabled some additional clang-only warnings, as a
result building i915 with clang currently is extremely noisy. For now
also disable the clang warnings sign-compare, sometimes-uninitialized,
unneeded-internal-declaration and initializer-overrides. If desired
they can be re-enabled after the code has been fixed.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501182440.70121-1-mka@chromium.org
2018-05-02 16:38:08 +01:00
Geert Uytterhoeven
10e3a88b29 pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding
A new open coder has crept in since 470b73a384 ("pinctrl: sunxi:
Use of_clk_get_parent_count() instead of open coding"), replace it.

of_clk_get_parent_count() was moved to <linux/of_clk.h>, so include that
instead of <linux/clk-provider.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-02 08:35:40 -07:00
Geert Uytterhoeven
3fd0121b02 soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding
As of_clk_get_parent_count() returns zero on failure, while
of_count_phandle_with_args() might return a negative error code, this
also fixes the issue of possibly using a very big number in the
allocation below.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-02 08:34:59 -07:00
Geert Uytterhoeven
54d52ad940 soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding
As of_clk_get_parent_count() returns zero on failure, while
of_count_phandle_with_args() might return a negative error code, this
also fixes the issue of possibly using a negative number in the
allocation below.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-02 08:33:52 -07:00